/* $NetBSD: sgec.c,v 1.11 2000/12/14 06:27:26 thorpej Exp $ */ /* * Copyright (c) 1999 Ludd, University of Lule}, Sweden. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed at Ludd, University of * Lule}, Sweden and its contributors. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Driver for the SGEC (Second Generation Ethernet Controller), sitting * on for example the VAX 4000/300 (KA670). * * The SGEC looks like a mixture of the DEQNA and the TULIP. Fun toy. * * Even though the chip is capable to use virtual addresses (read the * System Page Table directly) this driver doesn't do so, and there * is no benefit in doing it either in NetBSD of today. * * Things that is still to do: * Collect statistics. * Use imperfect filtering when many multicast addresses. */ #include "opt_inet.h" #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #if NBPFILTER > 0 #include #include #endif #include #include #include static void zeinit __P((struct ze_softc *)); static void zestart __P((struct ifnet *)); static int zeioctl __P((struct ifnet *, u_long, caddr_t)); static int ze_add_rxbuf __P((struct ze_softc *, int)); static void ze_setup __P((struct ze_softc *)); static void zetimeout __P((struct ifnet *)); static int zereset __P((struct ze_softc *)); #define ZE_WCSR(csr, val) \ bus_space_write_4(sc->sc_iot, sc->sc_ioh, csr, val) #define ZE_RCSR(csr) \ bus_space_read_4(sc->sc_iot, sc->sc_ioh, csr) /* * Interface exists: make available by filling in network interface * record. System will initialize the interface when it is ready * to accept packets. */ void sgec_attach(sc) struct ze_softc *sc; { struct ifnet *ifp = (struct ifnet *)&sc->sc_if; struct ze_tdes *tp; struct ze_rdes *rp; bus_dma_segment_t seg; int i, rseg, error; /* * Allocate DMA safe memory for descriptors and setup memory. */ if ((error = bus_dmamem_alloc(sc->sc_dmat, sizeof(struct ze_cdata), PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) { printf(": unable to allocate control data, error = %d\n", error); goto fail_0; } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, sizeof(struct ze_cdata), (caddr_t *)&sc->sc_zedata, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { printf(": unable to map control data, error = %d\n", error); goto fail_1; } if ((error = bus_dmamap_create(sc->sc_dmat, sizeof(struct ze_cdata), 1, sizeof(struct ze_cdata), 0, BUS_DMA_NOWAIT, &sc->sc_cmap)) != 0) { printf(": unable to create control data DMA map, error = %d\n", error); goto fail_2; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cmap, sc->sc_zedata, sizeof(struct ze_cdata), NULL, BUS_DMA_NOWAIT)) != 0) { printf(": unable to load control data DMA map, error = %d\n", error); goto fail_3; } /* * Zero the newly allocated memory. */ bzero(sc->sc_zedata, sizeof(struct ze_cdata)); /* * Create the transmit descriptor DMA maps. */ for (i = 0; i < TXDESCS; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW, &sc->sc_xmtmap[i]))) { printf(": unable to create tx DMA map %d, error = %d\n", i, error); goto fail_4; } } /* * Create receive buffer DMA maps. */ for (i = 0; i < RXDESCS; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, BUS_DMA_NOWAIT, &sc->sc_rcvmap[i]))) { printf(": unable to create rx DMA map %d, error = %d\n", i, error); goto fail_5; } } /* * Pre-allocate the receive buffers. */ for (i = 0; i < RXDESCS; i++) { if ((error = ze_add_rxbuf(sc, i)) != 0) { printf(": unable to allocate or map rx buffer %d\n," " error = %d\n", i, error); goto fail_6; } } /* For vmstat -i */ evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, NULL, sc->sc_dev.dv_xname, "intr"); /* * Create ring loops of the buffer chains. * This is only done once. */ sc->sc_pzedata = (struct ze_cdata *)sc->sc_cmap->dm_segs[0].ds_addr; rp = sc->sc_zedata->zc_recv; rp[RXDESCS].ze_framelen = ZE_FRAMELEN_OW; rp[RXDESCS].ze_rdes1 = ZE_RDES1_CA; rp[RXDESCS].ze_bufaddr = (char *)sc->sc_pzedata->zc_recv; tp = sc->sc_zedata->zc_xmit; tp[TXDESCS].ze_tdr = ZE_TDR_OW; tp[TXDESCS].ze_tdes1 = ZE_TDES1_CA; tp[TXDESCS].ze_bufaddr = (char *)sc->sc_pzedata->zc_xmit; if (zereset(sc)) return; strcpy(ifp->if_xname, sc->sc_dev.dv_xname); ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_start = zestart; ifp->if_ioctl = zeioctl; ifp->if_watchdog = zetimeout; IFQ_SET_READY(&ifp->if_snd); /* * Attach the interface. */ if_attach(ifp); ether_ifattach(ifp, sc->sc_enaddr); printf("\n%s: hardware address %s\n", sc->sc_dev.dv_xname, ether_sprintf(sc->sc_enaddr)); return; /* * Free any resources we've allocated during the failed attach * attempt. Do this in reverse order and fall through. */ fail_6: for (i = 0; i < RXDESCS; i++) { if (sc->sc_rxmbuf[i] != NULL) { bus_dmamap_unload(sc->sc_dmat, sc->sc_xmtmap[i]); m_freem(sc->sc_rxmbuf[i]); } } fail_5: for (i = 0; i < RXDESCS; i++) { if (sc->sc_xmtmap[i] != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_xmtmap[i]); } fail_4: for (i = 0; i < TXDESCS; i++) { if (sc->sc_rcvmap[i] != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_rcvmap[i]); } bus_dmamap_unload(sc->sc_dmat, sc->sc_cmap); fail_3: bus_dmamap_destroy(sc->sc_dmat, sc->sc_cmap); fail_2: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_zedata, sizeof(struct ze_cdata)); fail_1: bus_dmamem_free(sc->sc_dmat, &seg, rseg); fail_0: return; } /* * Initialization of interface. */ void zeinit(sc) struct ze_softc *sc; { struct ifnet *ifp = (struct ifnet *)&sc->sc_if; struct ze_cdata *zc = sc->sc_zedata; int i; /* * Reset the interface. */ if (zereset(sc)) return; sc->sc_nexttx = sc->sc_inq = sc->sc_lastack = 0; /* * Release and init transmit descriptors. */ for (i = 0; i < TXDESCS; i++) { if (sc->sc_txmbuf[i]) { bus_dmamap_unload(sc->sc_dmat, sc->sc_xmtmap[i]); m_freem(sc->sc_txmbuf[i]); sc->sc_txmbuf[i] = 0; } zc->zc_xmit[i].ze_tdr = 0; /* Clear valid bit */ } /* * Init receive descriptors. */ for (i = 0; i < RXDESCS; i++) zc->zc_recv[i].ze_framelen = ZE_FRAMELEN_OW; sc->sc_nextrx = 0; ZE_WCSR(ZE_CSR6, ZE_NICSR6_IE|ZE_NICSR6_BL_8|ZE_NICSR6_ST| ZE_NICSR6_SR|ZE_NICSR6_DC); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; /* * Send a setup frame. * This will start the transmit machinery as well. */ ze_setup(sc); } /* * Start output on interface. */ void zestart(ifp) struct ifnet *ifp; { struct ze_softc *sc = ifp->if_softc; struct ze_cdata *zc = sc->sc_zedata; paddr_t buffer; struct mbuf *m, *m0; int idx, len, s, i, totlen, error; int old_inq = sc->sc_inq; short orword; s = splimp(); while (sc->sc_inq < (TXDESCS - 1)) { if (sc->sc_setup) { ze_setup(sc); continue; } idx = sc->sc_nexttx; IFQ_POLL(&sc->sc_if.if_snd, m); if (m == 0) goto out; /* * Count number of mbufs in chain. * Always do DMA directly from mbufs, therefore the transmit * ring is really big. */ for (m0 = m, i = 0; m0; m0 = m0->m_next) if (m0->m_len) i++; if (i >= TXDESCS) panic("zestart"); /* XXX */ if ((i + sc->sc_inq) >= (TXDESCS - 1)) { ifp->if_flags |= IFF_OACTIVE; goto out; } #if NBPFILTER > 0 if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m); #endif /* * m now points to a mbuf chain that can be loaded. * Loop around and set it. */ totlen = 0; for (m0 = m; m0; m0 = m0->m_next) { error = bus_dmamap_load(sc->sc_dmat, sc->sc_xmtmap[idx], mtod(m0, void *), m0->m_len, 0, 0); buffer = sc->sc_xmtmap[idx]->dm_segs[0].ds_addr; len = m0->m_len; if (len == 0) continue; totlen += len; /* Word alignment calc */ orword = 0; if (totlen == len) orword = ZE_TDES1_FS; if (totlen == m->m_pkthdr.len) { if (totlen < ETHER_MIN_LEN) len += (ETHER_MIN_LEN - totlen); orword |= ZE_TDES1_LS; sc->sc_txmbuf[idx] = m; } zc->zc_xmit[idx].ze_bufsize = len; zc->zc_xmit[idx].ze_bufaddr = (char *)buffer; zc->zc_xmit[idx].ze_tdes1 = orword | ZE_TDES1_IC; zc->zc_xmit[idx].ze_tdr = ZE_TDR_OW; if (++idx == TXDESCS) idx = 0; sc->sc_inq++; } IFQ_DEQUEUE(&ifp->if_snd, m); #ifdef DIAGNOSTIC if (totlen != m->m_pkthdr.len) panic("zestart: len fault"); #endif /* * Kick off the transmit logic, if it is stopped. */ if ((ZE_RCSR(ZE_CSR5) & ZE_NICSR5_TS) != ZE_NICSR5_TS_RUN) ZE_WCSR(ZE_CSR1, -1); sc->sc_nexttx = idx; } if (sc->sc_inq == (TXDESCS - 1)) ifp->if_flags |= IFF_OACTIVE; out: if (old_inq < sc->sc_inq) ifp->if_timer = 5; /* If transmit logic dies */ splx(s); } int sgec_intr(sc) struct ze_softc *sc; { struct ze_cdata *zc = sc->sc_zedata; struct ifnet *ifp = &sc->sc_if; struct mbuf *m; int csr, len; csr = ZE_RCSR(ZE_CSR5); if ((csr & ZE_NICSR5_IS) == 0) /* Wasn't we */ return 0; ZE_WCSR(ZE_CSR5, csr); if (csr & ZE_NICSR5_RI) while ((zc->zc_recv[sc->sc_nextrx].ze_framelen & ZE_FRAMELEN_OW) == 0) { ifp->if_ipackets++; m = sc->sc_rxmbuf[sc->sc_nextrx]; len = zc->zc_recv[sc->sc_nextrx].ze_framelen; ze_add_rxbuf(sc, sc->sc_nextrx); m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = len; m->m_flags |= M_HASFCS; if (++sc->sc_nextrx == RXDESCS) sc->sc_nextrx = 0; #if NBPFILTER > 0 if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m); #endif (*ifp->if_input)(ifp, m); } if (csr & ZE_NICSR5_TI) { while ((zc->zc_xmit[sc->sc_lastack].ze_tdr & ZE_TDR_OW) == 0) { int idx = sc->sc_lastack; if (sc->sc_lastack == sc->sc_nexttx) break; sc->sc_inq--; if (++sc->sc_lastack == TXDESCS) sc->sc_lastack = 0; if ((zc->zc_xmit[idx].ze_tdes1 & ZE_TDES1_DT) == ZE_TDES1_DT_SETUP) continue; /* XXX collect statistics */ if (zc->zc_xmit[idx].ze_tdes1 & ZE_TDES1_LS) ifp->if_opackets++; bus_dmamap_unload(sc->sc_dmat, sc->sc_xmtmap[idx]); if (sc->sc_txmbuf[idx]) { m_freem(sc->sc_txmbuf[idx]); sc->sc_txmbuf[idx] = 0; } } if (sc->sc_inq == 0) ifp->if_timer = 0; ifp->if_flags &= ~IFF_OACTIVE; zestart(ifp); /* Put in more in queue */ } return 1; } /* * Process an ioctl request. */ int zeioctl(ifp, cmd, data) struct ifnet *ifp; u_long cmd; caddr_t data; { struct ze_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *)data; struct ifaddr *ifa = (struct ifaddr *)data; int s = splnet(), error = 0; switch (cmd) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch(ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: zeinit(sc); arp_ifinit(ifp, ifa); break; #endif } break; case SIOCSIFFLAGS: if ((ifp->if_flags & IFF_UP) == 0 && (ifp->if_flags & IFF_RUNNING) != 0) { /* * If interface is marked down and it is running, * stop it. (by disabling receive mechanism). */ ZE_WCSR(ZE_CSR6, ZE_RCSR(ZE_CSR6) & ~(ZE_NICSR6_ST|ZE_NICSR6_SR)); ifp->if_flags &= ~IFF_RUNNING; } else if ((ifp->if_flags & IFF_UP) != 0 && (ifp->if_flags & IFF_RUNNING) == 0) { /* * If interface it marked up and it is stopped, then * start it. */ zeinit(sc); } else if ((ifp->if_flags & IFF_UP) != 0) { /* * Send a new setup packet to match any new changes. * (Like IFF_PROMISC etc) */ ze_setup(sc); } break; case SIOCADDMULTI: case SIOCDELMULTI: /* * Update our multicast list. */ error = (cmd == SIOCADDMULTI) ? ether_addmulti(ifr, &sc->sc_ec): ether_delmulti(ifr, &sc->sc_ec); if (error == ENETRESET) { /* * Multicast list has changed; set the hardware filter * accordingly. */ ze_setup(sc); error = 0; } break; default: error = EINVAL; } splx(s); return (error); } /* * Add a receive buffer to the indicated descriptor. */ int ze_add_rxbuf(sc, i) struct ze_softc *sc; int i; { struct mbuf *m; struct ze_rdes *rp; int error; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return (ENOBUFS); MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); return (ENOBUFS); } if (sc->sc_rxmbuf[i] != NULL) bus_dmamap_unload(sc->sc_dmat, sc->sc_rcvmap[i]); error = bus_dmamap_load(sc->sc_dmat, sc->sc_rcvmap[i], m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT); if (error) panic("%s: can't load rx DMA map %d, error = %d\n", sc->sc_dev.dv_xname, i, error); sc->sc_rxmbuf[i] = m; bus_dmamap_sync(sc->sc_dmat, sc->sc_rcvmap[i], 0, sc->sc_rcvmap[i]->dm_mapsize, BUS_DMASYNC_PREREAD); /* * We know that the mbuf cluster is page aligned. Also, be sure * that the IP header will be longword aligned. */ m->m_data += 2; rp = &sc->sc_zedata->zc_recv[i]; rp->ze_bufsize = (m->m_ext.ext_size - 2); rp->ze_bufaddr = (char *)sc->sc_rcvmap[i]->dm_segs[0].ds_addr + 2; rp->ze_framelen = ZE_FRAMELEN_OW; return (0); } /* * Create a setup packet and put in queue for sending. */ void ze_setup(sc) struct ze_softc *sc; { struct ether_multi *enm; struct ether_multistep step; struct ze_cdata *zc = sc->sc_zedata; struct ifnet *ifp = &sc->sc_if; u_int8_t *enaddr = LLADDR(ifp->if_sadl); int j, idx, s, reg; s = splimp(); if (sc->sc_inq == (TXDESCS - 1)) { sc->sc_setup = 1; splx(s); return; } sc->sc_setup = 0; /* * Init the setup packet with valid info. */ memset(zc->zc_setup, 0xff, sizeof(zc->zc_setup)); /* Broadcast */ bcopy(enaddr, zc->zc_setup, ETHER_ADDR_LEN); /* * Multicast handling. The SGEC can handle up to 16 direct * ethernet addresses. */ j = 16; ifp->if_flags &= ~IFF_ALLMULTI; ETHER_FIRST_MULTI(step, &sc->sc_ec, enm); while (enm != NULL) { if (bcmp(enm->enm_addrlo, enm->enm_addrhi, 6)) { ifp->if_flags |= IFF_ALLMULTI; break; } bcopy(enm->enm_addrlo, &zc->zc_setup[j], ETHER_ADDR_LEN); j += 8; ETHER_NEXT_MULTI(step, enm); if ((enm != NULL)&& (j == 128)) { ifp->if_flags |= IFF_ALLMULTI; break; } } /* * ALLMULTI implies PROMISC in this driver. */ if (ifp->if_flags & IFF_ALLMULTI) ifp->if_flags |= IFF_PROMISC; else if (ifp->if_pcount == 0) ifp->if_flags &= ~IFF_PROMISC; /* * Fiddle with the receive logic. */ reg = ZE_RCSR(ZE_CSR6); DELAY(10); ZE_WCSR(ZE_CSR6, reg & ~ZE_NICSR6_SR); /* Stop rx */ reg &= ~ZE_NICSR6_AF; if (ifp->if_flags & IFF_PROMISC) reg |= ZE_NICSR6_AF_PROM; else if (ifp->if_flags & IFF_ALLMULTI) reg |= ZE_NICSR6_AF_ALLM; DELAY(10); ZE_WCSR(ZE_CSR6, reg); /* * Only send a setup packet if needed. */ if ((ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)) == 0) { idx = sc->sc_nexttx; zc->zc_xmit[idx].ze_tdes1 = ZE_TDES1_DT_SETUP; zc->zc_xmit[idx].ze_bufsize = 128; zc->zc_xmit[idx].ze_bufaddr = sc->sc_pzedata->zc_setup; zc->zc_xmit[idx].ze_tdr = ZE_TDR_OW; if ((ZE_RCSR(ZE_CSR5) & ZE_NICSR5_TS) != ZE_NICSR5_TS_RUN) ZE_WCSR(ZE_CSR1, -1); sc->sc_inq++; if (++sc->sc_nexttx == TXDESCS) sc->sc_nexttx = 0; } splx(s); } /* * Check for dead transmit logic. */ void zetimeout(ifp) struct ifnet *ifp; { struct ze_softc *sc = ifp->if_softc; if (sc->sc_inq == 0) return; printf("%s: xmit logic died, resetting...\n", sc->sc_dev.dv_xname); /* * Do a reset of interface, to get it going again. * Will it work by just restart the transmit logic? */ zeinit(sc); } /* * Reset chip: * Set/reset the reset flag. * Write interrupt vector. * Write ring buffer addresses. * Write SBR. */ int zereset(sc) struct ze_softc *sc; { int reg, i, s; ZE_WCSR(ZE_CSR6, ZE_NICSR6_RE); DELAY(50000); if (ZE_RCSR(ZE_CSR6) & ZE_NICSR5_SF) { printf("%s: selftest failed\n", sc->sc_dev.dv_xname); return 1; } /* * Get the vector that were set at match time, and remember it. * WHICH VECTOR TO USE? Take one unused. XXX * Funny way to set vector described in the programmers manual. */ reg = ZE_NICSR0_IPL14 | sc->sc_intvec | 0x1fff0003; /* SYNC/ASYNC??? */ i = 10; s = splimp(); do { if (i-- == 0) { printf("Failing SGEC CSR0 init\n"); splx(s); return 1; } ZE_WCSR(ZE_CSR0, reg); } while (ZE_RCSR(ZE_CSR0) != reg); splx(s); ZE_WCSR(ZE_CSR3, (vaddr_t)sc->sc_pzedata->zc_recv); ZE_WCSR(ZE_CSR4, (vaddr_t)sc->sc_pzedata->zc_xmit); return 0; }