/* $NetBSD: grfabs_et.c,v 1.19 2002/03/04 15:35:57 wiz Exp $ */ /* * Copyright (c) 1996 Leo Weppelman. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Leo Weppelman. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Most of the lower-level et4000 stuff was derived from: * .../amiga/dev/grf_et.c * * Which was copyrighted by: * Copyright (c) 1996 Tobias Abt * Copyright (c) 1995 Ezra Story * Copyright (c) 1995 Kari Mettinen * Copyright (c) 1994 Markus Wild * Copyright (c) 1994 Lutz Vieweg * * Thanks guys! * */ #include #include #include #include #include #include /* * For PCI probing... */ #include #include #include #include #include #include #include #include #include #include #include #include #define SAVEBUF_SIZE (32*1024 + sizeof(save_area_t)) /* * Allow a 16Kb io-region and a 4MB frame buffer to be mapped. This * is more or less required by the XFree server. */ #define REG_MAPPABLE (16 * 1024) #define FRAME_MAPPABLE (4 * 1024 * 1024) #define VGA_MAPPABLE (128 * 1024) #define VGA_BASE 0xa0000 /* * Linear memory base, near the end of the pci area */ #define PCI_LINMEMBASE 0x0e000000 /* * Function decls */ static void init_view __P((view_t *, bmap_t *, dmode_t *, box_t *)); static colormap_t *alloc_colormap __P((dmode_t *)); static void et_display_view __P((view_t *)); static view_t *et_alloc_view __P((dmode_t *, dimen_t *, u_char)); static void et_free_view __P((view_t *)); static void et_loadmode __P((struct grfvideo_mode *, et_sv_reg_t *)); static void et_remove_view __P((view_t *)); static void et_save_view __P((view_t *)); static int et_use_colormap __P((view_t *, colormap_t *)); /* * Our function switch table */ struct grfabs_sw et_vid_sw = { et_display_view, et_alloc_view, et_free_view, et_remove_view, et_save_view, et_use_colormap }; static struct grfvideo_mode hw_modes[] = { { 0, "", 25175000, /* num, descr, pix-clock */ 640, 400, 4, /* width, height, depth */ 632/8, 672/8, 688/8, 808/8, 768/8,/* HBS, HBE, HSS, HSE, HT */ 399, 450, 408, 413, 449 /* VBS, VBE, VSS, VSE, VT */ }, { 0, "", 25175000, /* num, descr, pix-clock */ 640, 480, 4, /* width, height, depth */ 632/8, 672/8, 688/8, 752/8, 752/8,/* HBS, HBE, HSS, HSE, HT */ 481, 522, 490, 498, 522 /* VBS, VBE, VSS, VSE, VT */ } }; static dmode_t vid_modes[] = { { { NULL, NULL }, "640x400", { 640, 400 }, 1, (void*)&hw_modes[0], &et_vid_sw }, { { NULL, NULL }, "640x480", { 640, 480 }, 1, (void*)&hw_modes[1], &et_vid_sw }, { { NULL, NULL }, NULL, } }; #define ET_NUMCLOCKS 32 static u_int et_clockfreqs[ET_NUMCLOCKS] = { 6293750, 7080500, 7875000, 8125000, 9000000, 9375000, 10000000, 11225000, 12587500, 14161000, 15750000, 16250000, 18000000, 18750000, 20000000, 22450000, 25175000, 28322000, 31500000, 32500000, 36000000, 37500000, 40000000, 44900000, 50350000, 56644000, 63000000, 65000000, 72000000, 75000000, 80000000, 89800000 }; static bmap_t con_bm; /* XXX */ struct grfabs_et_priv { pcitag_t pci_tag; volatile caddr_t regkva; volatile caddr_t memkva; u_int linbase; int regsz; int memsz; int board_type; } et_priv; /* * Board types: */ #define BT_ET4000 1 #define BT_ET6000 2 /* * XXX: called from ite console init routine. * Initialize list of possible video modes. */ void et_probe_video(modelp) MODES *modelp; { dmode_t *dm; int i; for (i = 0; (dm = &vid_modes[i])->name != NULL; i++) { LIST_INSERT_HEAD(modelp, dm, link); } } static void et_display_view(v) view_t *v; { dmode_t *dm = v->mode; bmap_t *bm = v->bitmap; int sv_size; u_short *src, *dst; save_area_t *sa; if (dm->current_view && (dm->current_view != v)) { /* * Mark current view for this mode as no longer displayed */ dm->current_view->flags &= ~VF_DISPLAY; } dm->current_view = v; v->flags |= VF_DISPLAY; if ((sa = (save_area_t*)v->save_area) == NULL) return; /* XXX: Can't happen.... */ /* * Restore register settings and turn the plane pointer * to the card-memory */ et_hwrest(&sa->sv_regs); bm->plane = et_priv.memkva; et_use_colormap(v, v->colormap); /* * Copy the backing store to card-memory */ sv_size = sa->fb_size; src = sa->sv_fb; dst = (u_short *)bm->plane; while (sv_size--) *dst++ = *src++; } void et_remove_view(v) view_t *v; { dmode_t *mode = v->mode; if (mode->current_view == v) { #if 0 if (v->flags & VF_DISPLAY) panic("Cannot shutdown display\n"); /* XXX */ #endif mode->current_view = NULL; } v->flags &= ~VF_DISPLAY; } void et_save_view(v) view_t *v; { bmap_t *bm = v->bitmap; u_char font_height; int sv_size; u_short *src, *dst; save_area_t *sa; if (!atari_realconfig) return; if (RGfx(et_priv.regkva, GCT_ID_MISC) & 1) { #if 0 /* XXX: Can't use printf here.... */ printf("et_save_view: Don't know how to save" " a graphics mode\n"); #endif return; } if (v->save_area == NULL) v->save_area = malloc(SAVEBUF_SIZE, M_DEVBUF, M_NOWAIT); /* * Calculate the size of the copy */ font_height = RCrt(et_priv.regkva, CRT_ID_MAX_ROW_ADDRESS) & 0x1f; sv_size = bm->bytes_per_row * (bm->rows / (font_height + 1)); sv_size = min(SAVEBUF_SIZE, sv_size); /* * Save all we need to know.... */ sa = (save_area_t *)v->save_area; et_hwsave(&sa->sv_regs); sa->fb_size = sv_size; src = (u_short *)bm->plane; dst = sa->sv_fb; while (sv_size--) *dst++ = *src++; bm->plane = (u_char *)sa->sv_fb; } void et_free_view(v) view_t *v; { if(v) { et_remove_view(v); if (v->colormap != &gra_con_cmap) free(v->colormap, M_DEVBUF); if (v->save_area != NULL) free(v->save_area, M_DEVBUF); if (v != &gra_con_view) { free(v->bitmap, M_DEVBUF); free(v, M_DEVBUF); } } } static int et_use_colormap(v, cm) view_t *v; colormap_t *cm; { return (0); /* XXX: Nothing here for now... */ } static view_t * et_alloc_view(mode, dim, depth) dmode_t *mode; dimen_t *dim; u_char depth; { view_t *v; bmap_t *bm; box_t box; save_area_t *sa; if (!atari_realconfig) { v = &gra_con_view; bm = &con_bm; } else { v = malloc(sizeof(*v), M_DEVBUF, M_WAITOK); bm = malloc(sizeof(*bm), M_DEVBUF, M_WAITOK); } v->bitmap = bm; /* * Initialize the bitmap */ bm->plane = et_priv.memkva; bm->vga_address = (caddr_t)kvtop(et_priv.memkva); bm->vga_base = VGA_BASE; bm->hw_address = (caddr_t)(PCI_MEM_PHYS | et_priv.linbase); bm->lin_base = et_priv.linbase; bm->regs = et_priv.regkva; bm->hw_regs = (caddr_t)kvtop(et_priv.regkva); bm->reg_size = REG_MAPPABLE; bm->phys_mappable = FRAME_MAPPABLE; bm->vga_mappable = VGA_MAPPABLE; bm->bytes_per_row = (mode->size.width * depth) / NBBY; bm->rows = mode->size.height; bm->depth = depth; /* * Allocate a save_area. * Note: If atari_realconfig is false, no save area is (can be) * allocated. This means that the plane is the video memory, * which is what's wanted in this case. */ if (atari_realconfig) { v->save_area = malloc(SAVEBUF_SIZE, M_DEVBUF, M_WAITOK); sa = (save_area_t*)v->save_area; sa->fb_size = 0; bm->plane = (u_char *)sa->sv_fb; et_loadmode(mode->data, &sa->sv_regs); } else v->save_area = NULL; v->colormap = alloc_colormap(mode); if (v->colormap) { INIT_BOX(&box,0,0,mode->size.width,mode->size.height); init_view(v, bm, mode, &box); return (v); } if (v != &gra_con_view) { free(v, M_DEVBUF); free(bm, M_DEVBUF); } return (NULL); } static void init_view(v, bm, mode, dbox) view_t *v; bmap_t *bm; dmode_t *mode; box_t *dbox; { v->bitmap = bm; v->mode = mode; v->flags = 0; bcopy(dbox, &v->display, sizeof(box_t)); } /* XXX: No more than a stub... */ static colormap_t * alloc_colormap(dm) dmode_t *dm; { colormap_t *cm; int i; cm = &gra_con_cmap; cm->entry = gra_con_colors; cm->first = 0; cm->size = 2; for (i = 0; i < 2; i++) cm->entry[i] = gra_def_color16[i % 16]; return (cm); } /* * Go look for a VGA card on the PCI-bus. This search is a * stripped down version of the PCI-probe. It only looks on * bus0 for et4000/et6000 cards. The first card found is used. */ int et_probe_card() { pci_chipset_tag_t pc = NULL; /* XXX */ pcitag_t tag; int device, found, id, maxndevs; found = 0; tag = 0; id = 0; maxndevs = pci_bus_maxdevs(pc, 0); for (device = 0; !found && (device < maxndevs); device++) { tag = pci_make_tag(pc, 0, device, 0); id = pci_conf_read(pc, tag, PCI_ID_REG); if (id == 0 || id == 0xffffffff) continue; switch (PCI_PRODUCT(id)) { case PCI_PRODUCT_TSENG_ET6000: case PCI_PRODUCT_TSENG_ET4000_W32P_A: case PCI_PRODUCT_TSENG_ET4000_W32P_B: case PCI_PRODUCT_TSENG_ET4000_W32P_C: case PCI_PRODUCT_TSENG_ET4000_W32P_D: found = 1; break; default: break; } } if (!found) return (0); if (PCI_PRODUCT(id) == PCI_PRODUCT_TSENG_ET6000) et_priv.board_type = BT_ET6000; else et_priv.board_type = BT_ET4000; et_priv.pci_tag = tag; /* * The things below are setup in atari_init.c */ et_priv.regkva = (volatile caddr_t)pci_io_addr; et_priv.memkva = (volatile caddr_t)pci_mem_addr; et_priv.linbase = PCI_LINMEMBASE; /* XXX pci_conf_read??? */ et_priv.memsz = PCI_VGA_SIZE; et_priv.regsz = PCI_IO_SIZE; if (!atari_realconfig) { et_loadmode(&hw_modes[0], NULL); return (1); } return (1); } static void et_loadmode(mode, regs) struct grfvideo_mode *mode; et_sv_reg_t *regs; { unsigned short HDE, VDE; int lace, dblscan; int uplim, lowlim; int i; unsigned char clock, tmp; volatile u_char *ba; et_sv_reg_t loc_regs; if (regs == NULL) regs = &loc_regs; ba = et_priv.regkva; HDE = mode->disp_width / 8 - 1; VDE = mode->disp_height - 1; /* figure out whether lace or dblscan is needed */ uplim = mode->disp_height + (mode->disp_height / 4); lowlim = mode->disp_height - (mode->disp_height / 4); lace = (((mode->vtotal * 2) > lowlim) && ((mode->vtotal * 2) < uplim)) ? 1 : 0; dblscan = (((mode->vtotal / 2) > lowlim) && ((mode->vtotal / 2) < uplim)) ? 1 : 0; /* adjustments */ if (lace) VDE /= 2; regs->misc_output = 0x23; /* Page 0, Color mode */ regs->seg_sel = 0x00; regs->state_ctl = 0x00; regs->seq[SEQ_ID_RESET] = 0x03; /* reset off */ regs->seq[SEQ_ID_CLOCKING_MODE] = 0x21; /* Turn off screen */ regs->seq[SEQ_ID_MAP_MASK] = 0xff; /* Cpu writes all planes*/ regs->seq[SEQ_ID_CHAR_MAP_SELECT] = 0x00; /* Char. generator 0 */ regs->seq[SEQ_ID_MEMORY_MODE] = 0x0e; /* Seq. Memory mode */ /* * Set the clock... */ for(clock = ET_NUMCLOCKS-1; clock > 0; clock--) { if (et_clockfreqs[clock] <= mode->pixel_clock) break; } regs->misc_output |= (clock & 3) << 2; regs->aux_mode = 0xb4 | ((clock & 8) << 3); regs->compat_6845 = (clock & 4) ? 0x0a : 0x08; /* * The display parameters... */ regs->crt[CRT_ID_HOR_TOTAL] = mode->htotal; regs->crt[CRT_ID_HOR_DISP_ENA_END] = ((HDE >= mode->hblank_start) ? mode->hblank_stop - 1 : HDE); regs->crt[CRT_ID_START_HOR_BLANK] = mode->hblank_start; regs->crt[CRT_ID_END_HOR_BLANK] = (mode->hblank_stop & 0x1f) | 0x80; regs->crt[CRT_ID_START_HOR_RETR] = mode->hsync_start; regs->crt[CRT_ID_END_HOR_RETR] = (mode->hsync_stop & 0x1f) | ((mode->hblank_stop & 0x20) ? 0x80 : 0x00); regs->crt[CRT_ID_VER_TOTAL] = mode->vtotal; regs->crt[CRT_ID_START_VER_RETR] = mode->vsync_start; regs->crt[CRT_ID_END_VER_RETR] = (mode->vsync_stop & 0x0f) | 0x30; regs->crt[CRT_ID_VER_DISP_ENA_END] = VDE; regs->crt[CRT_ID_START_VER_BLANK] = mode->vblank_start; regs->crt[CRT_ID_END_VER_BLANK] = mode->vblank_stop; regs->crt[CRT_ID_MODE_CONTROL] = 0xab; regs->crt[CRT_ID_START_ADDR_HIGH] = 0x00; regs->crt[CRT_ID_START_ADDR_LOW] = 0x00; regs->crt[CRT_ID_LINE_COMPARE] = 0xff; regs->crt[CRT_ID_UNDERLINE_LOC] = 0x00; regs->crt[CRT_ID_PRESET_ROW_SCAN] = 0x00; regs->crt[CRT_ID_OFFSET] = mode->disp_width/16; regs->crt[CRT_ID_MAX_ROW_ADDRESS] = 0x40 | (dblscan ? 0x80 : 0x00) | ((mode->vblank_start & 0x200) ? 0x20 : 0x00); regs->crt[CRT_ID_OVERFLOW] = 0x10 | ((mode->vtotal & 0x100) ? 0x01 : 0x00) | ((VDE & 0x100) ? 0x02 : 0x00) | ((mode->vsync_start & 0x100) ? 0x04 : 0x00) | ((mode->vblank_start & 0x100) ? 0x08 : 0x00) | ((mode->vtotal & 0x200) ? 0x20 : 0x00) | ((VDE & 0x200) ? 0x40 : 0x00) | ((mode->vsync_start & 0x200) ? 0x80 : 0x00); regs->overfl_high = 0x10 | ((mode->vblank_start & 0x400) ? 0x01 : 0x00) | ((mode->vtotal & 0x400) ? 0x02 : 0x00) | ((VDE & 0x400) ? 0x04 : 0x00) | ((mode->vsync_start & 0x400) ? 0x08 : 0x00) | (lace ? 0x80 : 0x00); regs->hor_overfl = ((mode->htotal & 0x100) ? 0x01 : 0x00) | ((mode->hblank_start & 0x100) ? 0x04 : 0x00) | ((mode->hsync_start & 0x100) ? 0x10 : 0x00); regs->grf[GCT_ID_SET_RESET] = 0x00; regs->grf[GCT_ID_ENABLE_SET_RESET] = 0x00; regs->grf[GCT_ID_COLOR_COMPARE] = 0x00; regs->grf[GCT_ID_DATA_ROTATE] = 0x00; regs->grf[GCT_ID_READ_MAP_SELECT] = 0x00; regs->grf[GCT_ID_GRAPHICS_MODE] = mode->depth == 1 ? 0x00: 0x40; regs->grf[GCT_ID_MISC] = 0x01; regs->grf[GCT_ID_COLOR_XCARE] = 0x0f; regs->grf[GCT_ID_BITMASK] = 0xff; for (i = 0; i < 0x10; i++) regs->attr[i] = i; regs->attr[ACT_ID_ATTR_MODE_CNTL] = 0x01; regs->attr[ACT_ID_OVERSCAN_COLOR] = 0x00; regs->attr[ACT_ID_COLOR_PLANE_ENA] = 0x0f; regs->attr[ACT_ID_HOR_PEL_PANNING] = 0x00; regs->attr[ACT_ID_COLOR_SELECT] = 0x00; regs->attr[ACT_ID_MISCELLANEOUS] = 0x00; /* * XXX: This works for depth == 4. I need some better docs * to fix the other modes.... */ /* * What we need would be probe functions for RAMDAC/clock chip */ vgar(ba, VDAC_ADDRESS); /* clear old state */ vgar(ba, VDAC_MASK); vgar(ba, VDAC_MASK); vgar(ba, VDAC_MASK); vgar(ba, VDAC_MASK); vgaw(ba, VDAC_MASK, 0); /* set to palette */ vgar(ba, VDAC_ADDRESS); /* clear state */ vgaw(ba, VDAC_MASK, 0xff); /* * End of depth stuff */ /* * Compute Hsync & Vsync polarity * Note: This seems to be some kind of a black art :-( */ tmp = regs->misc_output & 0x3f; #if 1 /* This is according to my BW monitor & Xfree... */ if (VDE < 400) tmp |= 0x40; /* -hsync +vsync */ else if (VDE < 480) tmp |= 0xc0; /* -hsync -vsync */ #else /* This is according to my color monitor.... */ if (VDE < 400) tmp |= 0x00; /* +hsync +vsync */ else if (VDE < 480) tmp |= 0x80; /* +hsync -vsync */ #endif /* I'm unable to try the rest.... */ regs->misc_output = tmp; if(regs == &loc_regs) et_hwrest(regs); } void et_hwsave(et_regs) et_sv_reg_t *et_regs; { volatile u_char *ba; int i, s; ba = et_priv.regkva; s = splhigh(); /* * General VGA registers */ et_regs->misc_output = vgar(ba, GREG_MISC_OUTPUT_R); for(i = 0; i < 25; i++) et_regs->crt[i] = RCrt(ba, i); for(i = 0; i < 21; i++) et_regs->attr[i] = RAttr(ba, i | 0x20); for(i = 0; i < 9; i++) et_regs->grf[i] = RGfx(ba, i); for(i = 0; i < 5; i++) et_regs->seq[i] = RSeq(ba, i); /* * ET4000 extensions */ et_regs->ext_start = RCrt(ba, CTR_ID_EXT_START); et_regs->compat_6845 = RCrt(ba, CRT_ID_6845_COMPAT); et_regs->overfl_high = RCrt(ba, CRT_ID_OVERFLOW_HIGH); et_regs->hor_overfl = RCrt(ba, CRT_ID_HOR_OVERFLOW); et_regs->state_ctl = RSeq(ba, SEQ_ID_STATE_CONTROL); et_regs->aux_mode = RSeq(ba, SEQ_ID_AUXILIARY_MODE); et_regs->seg_sel = vgar(ba, GREG_SEGMENTSELECT); splx(s); } void et_hwrest(et_regs) et_sv_reg_t *et_regs; { volatile u_char *ba; int i, s; ba = et_priv.regkva; s = splhigh(); vgaw(ba, GREG_SEGMENTSELECT, 0); vgaw(ba, GREG_MISC_OUTPUT_W, et_regs->misc_output); /* * General VGA registers */ WSeq(ba, SEQ_ID_RESET, 0x01); for(i = 1; i < 5; i++) WSeq(ba, i, et_regs->seq[i]); WSeq(ba, SEQ_ID_RESET, 0x03); /* * Make sure we're allowed to write all crt-registers */ WCrt(ba, CRT_ID_END_VER_RETR, et_regs->crt[CRT_ID_END_VER_RETR] & 0x7f); for(i = 0; i < 25; i++) WCrt(ba, i, et_regs->crt[i]); for(i = 0; i < 9; i++) WGfx(ba, i, et_regs->grf[i]); for(i = 0; i < 21; i++) WAttr(ba, i | 0x20, et_regs->attr[i]); /* * ET4000 extensions */ WSeq(ba, SEQ_ID_STATE_CONTROL, et_regs->state_ctl); WSeq(ba, SEQ_ID_AUXILIARY_MODE, et_regs->aux_mode); WCrt(ba, CTR_ID_EXT_START, et_regs->ext_start); WCrt(ba, CRT_ID_6845_COMPAT, et_regs->compat_6845); WCrt(ba, CRT_ID_OVERFLOW_HIGH, et_regs->overfl_high); WCrt(ba, CRT_ID_HOR_OVERFLOW, et_regs->hor_overfl); vgaw(ba, GREG_SEGMENTSELECT, et_regs->seg_sel); i = et_regs->seq[SEQ_ID_CLOCKING_MODE] & ~0x20; WSeq(ba, SEQ_ID_CLOCKING_MODE, i); splx(s); }