/* $NetBSD: si.c,v 1.26 1996/08/27 21:57:41 cgd Exp $ */ /* * Copyright (c) 1995 David Jones, Gordon W. Ross * Copyright (c) 1994 Adam Glass * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the authors may not be used to endorse or promote products * derived from this software without specific prior written permission. * 4. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by * Adam Glass, David Jones, and Gordon Ross * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This file contains only the machine-dependent parts of the * Sun3 SCSI driver. (Autoconfig stuff and DMA functions.) * The machine-independent parts are in ncr5380sbc.c * * Supported hardware includes: * Sun SCSI-3 on OBIO (Sun3/50,Sun3/60) * Sun SCSI-3 on VME (Sun3/160,Sun3/260) * * Could be made to support the Sun3/E if someone wanted to. * * Note: Both supported variants of the Sun SCSI-3 adapter have * some really unusual "features" for this driver to deal with, * generally related to the DMA engine. The OBIO variant will * ignore any attempt to write the FIFO count register while the * SCSI bus is in DATA_IN or DATA_OUT phase. This is dealt with * by setting the FIFO count early in COMMAND or MSG_IN phase. * * The VME variant has a bit to enable or disable the DMA engine, * but that bit also gates the interrupt line from the NCR5380! * Therefore, in order to get any interrupt from the 5380, (i.e. * for reselect) one must clear the DMA engine transfer count and * then enable DMA. This has the further complication that you * CAN NOT touch the NCR5380 while the DMA enable bit is set, so * we have to turn DMA back off before we even look at the 5380. * * What wonderfully whacky hardware this is! * * Credits, history: * * David Jones wrote the initial version of this module, which * included support for the VME adapter only. (no reselection). * * Gordon Ross added support for the OBIO adapter, and re-worked * both the VME and OBIO code to support disconnect/reselect. * (Required figuring out the hardware "features" noted above.) * * The autoconfiguration boilerplate came from Adam Glass. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define DEBUG XXX #include #include #include "sireg.h" #include "sivar.h" int si_debug = 0; #ifdef DEBUG static int si_link_flags = 0 /* | SDEV_DB2 */ ; #endif /* How long to wait for DMA before declaring an error. */ int si_dma_intr_timo = 500; /* ticks (sec. X 100) */ static void si_minphys __P((struct buf *)); static int si_print __P((void *, const char *)); static struct scsi_adapter si_ops = { ncr5380_scsi_cmd, /* scsi_cmd() */ si_minphys, /* scsi_minphys() */ NULL, /* open_target_lu() */ NULL, /* close_target_lu() */ }; /* This is copied from julian's bt driver */ /* "so we have a default dev struct for our link struct." */ static struct scsi_device si_dev = { NULL, /* Use default error handler. */ NULL, /* Use default start handler. */ NULL, /* Use default async handler. */ NULL, /* Use default "done" routine. */ }; /* * New-style autoconfig attachment. The cfattach * structures are in si_obio.c and si_vme.c */ struct cfdriver si_cd = { NULL, "si", DV_DULL }; void si_attach(sc) struct si_softc *sc; { struct ncr5380_softc *ncr_sc = (void *)sc; volatile struct si_regs *regs = sc->sc_regs; int i; /* * Fill in the prototype scsi_link. */ ncr_sc->sc_link.adapter_softc = sc; ncr_sc->sc_link.adapter_target = 7; ncr_sc->sc_link.adapter = &si_ops; ncr_sc->sc_link.device = &si_dev; #ifdef DEBUG if (si_debug) printf("si: Set TheSoftC=%x TheRegs=%x\n", sc, regs); ncr_sc->sc_link.flags |= si_link_flags; #endif /* * Initialize fields used by the MI code */ ncr_sc->sci_r0 = ®s->sci.sci_r0; ncr_sc->sci_r1 = ®s->sci.sci_r1; ncr_sc->sci_r2 = ®s->sci.sci_r2; ncr_sc->sci_r3 = ®s->sci.sci_r3; ncr_sc->sci_r4 = ®s->sci.sci_r4; ncr_sc->sci_r5 = ®s->sci.sci_r5; ncr_sc->sci_r6 = ®s->sci.sci_r6; ncr_sc->sci_r7 = ®s->sci.sci_r7; /* * Allocate DMA handles. */ i = SCI_OPENINGS * sizeof(struct si_dma_handle); sc->sc_dma = (struct si_dma_handle *) malloc(i, M_DEVBUF, M_WAITOK); if (sc->sc_dma == NULL) panic("si: dvma_malloc failed\n"); for (i = 0; i < SCI_OPENINGS; i++) sc->sc_dma[i].dh_flags = 0; /* * Initialize si board itself. */ si_reset_adapter(ncr_sc); ncr5380_init(ncr_sc); ncr5380_reset_scsibus(ncr_sc); config_found(&(ncr_sc->sc_dev), &(ncr_sc->sc_link), si_print); } static int si_print(aux, name) void *aux; const char *name; { if (name != NULL) printf("%s: scsibus ", name); return UNCONF; } static void si_minphys(struct buf *bp) { if (bp->b_bcount > MAX_DMA_LEN) { #ifdef DEBUG if (si_debug) { printf("si_minphys len = 0x%x.\n", bp->b_bcount); Debugger(); } #endif bp->b_bcount = MAX_DMA_LEN; } return (minphys(bp)); } #define CSR_WANT (SI_CSR_SBC_IP | SI_CSR_DMA_IP | \ SI_CSR_DMA_CONFLICT | SI_CSR_DMA_BUS_ERR ) int si_intr(void *arg) { struct si_softc *sc = arg; volatile struct si_regs *si = sc->sc_regs; int dma_error, claimed; u_short csr; claimed = 0; dma_error = 0; /* SBC interrupt? DMA interrupt? */ csr = si->si_csr; NCR_TRACE("si_intr: csr=0x%x\n", csr); if (csr & SI_CSR_DMA_CONFLICT) { dma_error |= SI_CSR_DMA_CONFLICT; printf("si_intr: DMA conflict\n"); } if (csr & SI_CSR_DMA_BUS_ERR) { dma_error |= SI_CSR_DMA_BUS_ERR; printf("si_intr: DMA bus error\n"); } if (dma_error) { if (sc->ncr_sc.sc_state & NCR_DOINGDMA) sc->ncr_sc.sc_state |= NCR_ABORTING; /* Make sure we will call the main isr. */ csr |= SI_CSR_DMA_IP; } if (csr & (SI_CSR_SBC_IP | SI_CSR_DMA_IP)) { claimed = ncr5380_intr(&sc->ncr_sc); #ifdef DEBUG if (!claimed) { printf("si_intr: spurious from SBC\n"); if (si_debug & 4) { Debugger(); /* XXX */ } } #endif } return (claimed); } void si_reset_adapter(struct ncr5380_softc *ncr_sc) { struct si_softc *sc = (struct si_softc *)ncr_sc; volatile struct si_regs *si = sc->sc_regs; #ifdef DEBUG if (si_debug) { printf("si_reset_adapter\n"); } #endif /* * The SCSI3 controller has an 8K FIFO to buffer data between the * 5380 and the DMA. Make sure it starts out empty. * * The reset bits in the CSR are active low. */ si->si_csr = 0; delay(10); si->si_csr = SI_CSR_FIFO_RES | SI_CSR_SCSI_RES | SI_CSR_INTR_EN; delay(10); si->fifo_count = 0; if (sc->sc_adapter_type == BUS_VME16) { si->dma_addrh = 0; si->dma_addrl = 0; si->dma_counth = 0; si->dma_countl = 0; si->si_iv_am = sc->sc_adapter_iv_am; si->fifo_cnt_hi = 0; } SCI_CLR_INTR(ncr_sc); } /***************************************************************** * Common functions for DMA ****************************************************************/ /* * Allocate a DMA handle and put it in sc->sc_dma. Prepare * for DMA transfer. On the Sun3, this means mapping the buffer * into DVMA space. dvma_mapin() flushes the cache for us. */ void si_dma_alloc(ncr_sc) struct ncr5380_softc *ncr_sc; { struct si_softc *sc = (struct si_softc *)ncr_sc; struct sci_req *sr = ncr_sc->sc_current; struct scsi_xfer *xs = sr->sr_xs; struct si_dma_handle *dh; int i, xlen; u_long addr; #ifdef DIAGNOSTIC if (sr->sr_dma_hand != NULL) panic("si_dma_alloc: already have DMA handle"); #endif addr = (u_long) ncr_sc->sc_dataptr; xlen = ncr_sc->sc_datalen; /* If the DMA start addr is misaligned then do PIO */ if ((addr & 1) || (xlen & 1)) { printf("si_dma_alloc: misaligned.\n"); return; } /* Make sure our caller checked sc_min_dma_len. */ if (xlen < MIN_DMA_LEN) panic("si_dma_alloc: xlen=0x%x\n", xlen); /* * Never attempt single transfers of more than 63k, because * our count register may be only 16 bits (an OBIO adapter). * This should never happen since already bounded by minphys(). * XXX - Should just segment these... */ if (xlen > MAX_DMA_LEN) { printf("si_dma_alloc: excessive xlen=0x%x\n", xlen); Debugger(); ncr_sc->sc_datalen = xlen = MAX_DMA_LEN; } /* Find free DMA handle. Guaranteed to find one since we have as many DMA handles as the driver has processes. */ for (i = 0; i < SCI_OPENINGS; i++) { if ((sc->sc_dma[i].dh_flags & SIDH_BUSY) == 0) goto found; } panic("si: no free DMA handles."); found: dh = &sc->sc_dma[i]; dh->dh_flags = SIDH_BUSY; dh->dh_addr = (u_char*) addr; dh->dh_maplen = xlen; dh->dh_dvma = 0; /* Copy the "write" flag for convenience. */ if (xs->flags & SCSI_DATA_OUT) dh->dh_flags |= SIDH_OUT; #if 0 /* * Some machines might not need to remap B_PHYS buffers. * The sun3 does not map B_PHYS buffers into DVMA space, * (they are mapped into normal KV space) so on the sun3 * we must always remap to a DVMA address here. Re-map is * cheap anyway, because it's done by segments, not pages. */ if (xs->bp && (xs->bp->b_flags & B_PHYS)) dh->dh_flags |= SIDH_PHYS; #endif dh->dh_dvma = (u_long) dvma_mapin((char *)addr, xlen); if (!dh->dh_dvma) { /* Can't remap segment */ printf("si_dma_alloc: can't remap %x/%x\n", dh->dh_addr, dh->dh_maplen); dh->dh_flags = 0; return; } /* success */ sr->sr_dma_hand = dh; return; } void si_dma_free(ncr_sc) struct ncr5380_softc *ncr_sc; { struct sci_req *sr = ncr_sc->sc_current; struct si_dma_handle *dh = sr->sr_dma_hand; #ifdef DIAGNOSTIC if (dh == NULL) panic("si_dma_free: no DMA handle"); #endif if (ncr_sc->sc_state & NCR_DOINGDMA) panic("si_dma_free: free while in progress"); if (dh->dh_flags & SIDH_BUSY) { /* XXX - Should separate allocation and mapping. */ /* Give back the DVMA space. */ dvma_mapout((caddr_t)dh->dh_dvma, dh->dh_maplen); dh->dh_dvma = 0; dh->dh_flags = 0; } sr->sr_dma_hand = NULL; } #define CSR_MASK (SI_CSR_SBC_IP | SI_CSR_DMA_IP | \ SI_CSR_DMA_CONFLICT | SI_CSR_DMA_BUS_ERR) #define POLL_TIMO 50000 /* X100 = 5 sec. */ /* * Poll (spin-wait) for DMA completion. * Called right after xx_dma_start(), and * xx_dma_stop() will be called next. * Same for either VME or OBIO. */ void si_dma_poll(ncr_sc) struct ncr5380_softc *ncr_sc; { struct si_softc *sc = (struct si_softc *)ncr_sc; struct sci_req *sr = ncr_sc->sc_current; struct si_dma_handle *dh = sr->sr_dma_hand; volatile struct si_regs *si = sc->sc_regs; int tmo; /* Make sure DMA started successfully. */ if (ncr_sc->sc_state & NCR_ABORTING) return; /* * XXX: The Sun driver waits for ~SI_CSR_DMA_ACTIVE here * XXX: (on obio) or even worse (on vme) a 10mS. delay! * XXX: I really doubt that is necessary... */ /* Wait for any "dma complete" or error bits. */ tmo = POLL_TIMO; for (;;) { if (si->si_csr & CSR_MASK) break; if (--tmo <= 0) { printf("si: DMA timeout (while polling)\n"); /* Indicate timeout as MI code would. */ sr->sr_flags |= SR_OVERDUE; break; } delay(100); } NCR_TRACE("si_dma_poll: waited %d\n", POLL_TIMO - tmo); #ifdef DEBUG if (si_debug & 2) { printf("si_dma_poll: done, csr=0x%x\n", si->si_csr); } #endif }