# $NetBSD: FOUR_TTYS,v 1.18 1998/02/08 05:10:48 gwr Exp $ # FOUR_TTYS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) # like GENERIC but both zs chips are used as ttys include "arch/sun3/conf/std.sun3" # Machines to be supported by this kernel options FPU_EMULATE options HAVECACHE # Sun3/260 VAC # Needs to be set per system. i.e change these as you see fit maxusers 4 # Standard system options options KTRACE # system call tracing options SYSVMSG # System V message queues options SYSVSEM # System V semaphores options SYSVSHM # System V shared memory #options SHMMAXPGS=1024 # 1024 pages is the default #options LKM # loadable kernel modules #options INSECURE # disable kernel security level #options UCONSOLE # Allow non-root TIOCCONS # Which kernel debugger? Uncomment either this: options DDB # ... or these for KGDB (gdb remote target) #makeoptions DEBUG="-g" # debugging symbols for gdb #options KGDB #options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01 # Other debugging options #options DDB_HISTORY_SIZE=100 # enable history editing in DDB #options DEBUG # kernel debugging code #options DIAGNOSTIC # extra kernel sanity checking #options KMEMSTATS # kernel memory statistics (vmstat -m) #options PMAP_DEBUG #options SCSIDEBUG #options SCSIVERBOSE # Verbose SCSI errors # Compatability options options COMPAT_SUNOS # can run SunOS 4.1.1 executables options COMPAT_43 # and 4.3BSD and ... options COMPAT_10 # NetBSD 1.0 options COMPAT_11 # NetBSD 1.1 options COMPAT_12 # NetBSD 1.2 options COMPAT_13 # NetBSD 1.3 # Filesystem options file-system FFS # Berkeley Fast Filesystem file-system NFS # Sun NFS client support file-system CD9660 # ISO 9660 + Rock Ridge file system file-system FDESC # /dev/fd/* file-system KERNFS # /kern file-system NULLFS # loopback file system file-system PROCFS # /proc file-system UNION # union file system file-system MFS # memory-based filesystem options FIFO # FIFOs; RECOMMENDED options NFSSERVER # nfs server support options QUOTA # FFS quotas # Networking options options INET # IP prototol stack support options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP #options GATEWAY # IP packet forwarding #options ISO,TPIP # OSI networking #options EON # OSI tunneling over IP #options CCITT,LLC,HDLC # X.25 #options PFIL_HOOKS # pfil(9) packet filter hooks. # Work-around for root on slow servers (insurance...) options NFS_BOOT_RWSIZE=1024 options NFS_BOOT_BOOTPARAM config netbsd root on ? type ? # On-board I/O space (required) include "arch/sun3/conf/obio.sun3" # On-board memory (optional) # See frame-buffers obmem0 at mainbus? # VME bus support (optional) # One unit for each address space vme0 at mainbus? # A16/D16 vme1 at mainbus? # A16/D32 vme2 at mainbus? # A24/D16 vme3 at mainbus? # A24/D32 vme4 at mainbus? # A32/D16 vme5 at mainbus? # A32/D32 # # Serial ports # zstty0 at zsc1 channel 0 # ttya zstty1 at zsc1 channel 1 # ttyb # # Note that by ommitting "kdb0" and "ms0" one can build # a kernel that operates four plain serial lines, where # two of them are data-leads-only ports wired up using # a custom cable on the keyboard connector. The flags 1 # part sets TIOCFLAG_SOFTCAR (remember, data-leads-only). # zstty2 at zsc0 channel 0 flags 1 # ttyc zstty3 at zsc0 channel 1 flags 1 # ttyd # # Network devices # # Intel Ethernet (onboard, or VME) ie0 at obio0 addr 0x0C0000 ipl 3 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 # Lance Ethernet (only onboard) le0 at obio0 addr 0x120000 ipl 3 # All Sun3 machines with an "le" (3/50, 3/60) should be # presumed to have the old, buggy LANCE chip. (Rev. C) options LANCE_REVC_BUG # # Disk and tape devices # # Sun3 "si" SCSI controller (NCR 5380) # See GENERIC for the flags description. si0 at obio0 addr 0x140000 ipl 2 si0 at vme2 addr 0x200000 ipl 2 vect 0x40 si1 at vme2 addr 0x204000 ipl 2 vect 0x41 # Xylogics 450/451 controllers (VME A16/D16) xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 xy* at xyc? drive ? # Xylogics 7053 controllers (VME A16/D32) xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 xd* at xdc? drive ? # Xylogics 472 tape controllers? # Sun3/E SCSI+Ethernet board (VME A24/D16) # Note: the board uses vect and vect+1 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 si* at sebuf? ie* at sebuf? # # Frame buffer devices # (not useful if no kbd, right?) # # SCSI infrastructure # scsibus* at scsi? sd* at scsibus? target ? lun ? # SCSI disks st* at scsibus? target ? lun ? # SCSI tapes cd* at scsibus? target ? lun ? # SCSI CD-ROMs ch* at scsibus? target ? lun ? # SCSI changer devices ss* at scsibus? target ? lun ? # SCSI scanners uk* at scsibus? target ? lun ? # unknown SCSI devices # Memory-disk drivers pseudo-device md 2 # Misc. pseudo-device loop 1 # network loopback pseudo-device bpfilter 8 # packet filter pseudo-device sl 2 # CSLIP pseudo-device ppp 2 # PPP pseudo-device tun 2 # network tunneling over tty #pseudo-device ipfilter # ip filter # rnd is EXPERIMENTAL #pseudo-device rnd # /dev/random and in-kernel generator pseudo-device pty 32 # pseudo-terminals #pseudo-device vnd 4 # paging to files #pseudo-device ccd 4 # concatenated disks