/* $NetBSD: aic6360.c,v 1.38 1995/12/24 02:31:08 mycroft Exp $ */ /* * Copyright (c) 1994, 1995 Charles Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Copyright (c) 1994 Jarle Greipsland * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Acknowledgements: Many of the algorithms used in this driver are * inspired by the work of Julian Elischer (julian@tfs.com) and * Charles Hannum (mycroft@duality.gnu.ai.mit.edu). Thanks a million! */ /* TODO list: * 1) Get the DMA stuff working. * 2) Get the iov/uio stuff working. Is this a good thing ??? * 3) Get the synch stuff working. * 4) Rewrite it to use malloc for the acb structs instead of static alloc.? */ /* * A few customizable items: */ /* Use doubleword transfers to/from SCSI chip. Note: This requires * motherboard support. Basicly, some motherboard chipsets are able to * split a 32 bit I/O operation into two 16 bit I/O operations, * transparently to the processor. This speeds up some things, notably long * data transfers. */ #define AIC_USE_DWORDS 0 /* Synchronous data transfers? */ #define AIC_USE_SYNCHRONOUS 1 #define AIC_SYNC_REQ_ACK_OFS 8 /* Wide data transfers? */ #define AIC_USE_WIDE 0 #define AIC_MAX_WIDTH 0 /* Max attempts made to transmit a message */ #define AIC_MSG_MAX_ATTEMPT 3 /* Not used now XXX */ /* Use DMA (else we do programmed I/O using string instructions) (not yet!)*/ #define AIC_USE_EISA_DMA 0 #define AIC_USE_ISA_DMA 0 /* How to behave on the (E)ISA bus when/if DMAing (on<<4) + off in us */ #define EISA_BRST_TIM ((15<<4) + 1) /* 15us on, 1us off */ /* Some spin loop parameters (essentially how long to wait some places) * The problem(?) is that sometimes we expect either to be able to transmit a * byte or to get a new one from the SCSI bus pretty soon. In order to avoid * returning from the interrupt just to get yanked back for the next byte we * may spin in the interrupt routine waiting for this byte to come. How long? * This is really (SCSI) device and processor dependent. Tuneable, I guess. */ #define AIC_MSGIN_SPIN 1 /* Will spinwait upto ?ms for a new msg byte */ #define AIC_MSGOUT_SPIN 1 /* Include debug functions? At the end of this file there are a bunch of * functions that will print out various information regarding queued SCSI * commands, driver state and chip contents. You can call them from the * kernel debugger. If you set AIC_DEBUG to 0 they are not included (the * kernel uses less memory) but you lose the debugging facilities. */ #define AIC_DEBUG 1 /* End of customizable parameters */ #if AIC_USE_EISA_DMA || AIC_USE_ISA_DMA #error "I said not yet! Start paying attention... grumble" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Definitions, most of them has turned out to be unneccesary, but here they * are anyway. */ /* AIC6360 definitions */ #define IOBASE sc->sc_iobase #define SCSISEQ (IOBASE + 0x00) /* SCSI sequence control */ #define SXFRCTL0 (IOBASE + 0x01) /* SCSI transfer control 0 */ #define SXFRCTL1 (IOBASE + 0x02) /* SCSI transfer control 1 */ #define SCSISIG (IOBASE + 0x03) /* SCSI signal in/out */ #define SCSIRATE (IOBASE + 0x04) /* SCSI rate control */ #define SCSIID (IOBASE + 0x05) /* SCSI ID */ #define SELID (IOBASE + 0x05) /* Selection/Reselection ID */ #define SCSIDAT (IOBASE + 0x06) /* SCSI Latched Data */ #define SCSIBUS (IOBASE + 0x07) /* SCSI Data Bus*/ #define STCNT0 (IOBASE + 0x08) /* SCSI transfer count */ #define STCNT1 (IOBASE + 0x09) #define STCNT2 (IOBASE + 0x0a) #define CLRSINT0 (IOBASE + 0x0b) /* Clear SCSI interrupts 0 */ #define SSTAT0 (IOBASE + 0x0b) /* SCSI interrupt status 0 */ #define CLRSINT1 (IOBASE + 0x0c) /* Clear SCSI interrupts 1 */ #define SSTAT1 (IOBASE + 0x0c) /* SCSI status 1 */ #define SSTAT2 (IOBASE + 0x0d) /* SCSI status 2 */ #define SCSITEST (IOBASE + 0x0e) /* SCSI test control */ #define SSTAT3 (IOBASE + 0x0e) /* SCSI status 3 */ #define CLRSERR (IOBASE + 0x0f) /* Clear SCSI errors */ #define SSTAT4 (IOBASE + 0x0f) /* SCSI status 4 */ #define SIMODE0 (IOBASE + 0x10) /* SCSI interrupt mode 0 */ #define SIMODE1 (IOBASE + 0x11) /* SCSI interrupt mode 1 */ #define DMACNTRL0 (IOBASE + 0x12) /* DMA control 0 */ #define DMACNTRL1 (IOBASE + 0x13) /* DMA control 1 */ #define DMASTAT (IOBASE + 0x14) /* DMA status */ #define FIFOSTAT (IOBASE + 0x15) /* FIFO status */ #define DMADATA (IOBASE + 0x16) /* DMA data */ #define DMADATAL (IOBASE + 0x16) /* DMA data low byte */ #define DMADATAH (IOBASE + 0x17) /* DMA data high byte */ #define BRSTCNTRL (IOBASE + 0x18) /* Burst Control */ #define DMADATALONG (IOBASE + 0x18) #define PORTA (IOBASE + 0x1a) /* Port A */ #define PORTB (IOBASE + 0x1b) /* Port B */ #define REV (IOBASE + 0x1c) /* Revision (001 for 6360) */ #define STACK (IOBASE + 0x1d) /* Stack */ #define TEST (IOBASE + 0x1e) /* Test register */ #define ID (IOBASE + 0x1f) /* ID register */ #define IDSTRING "(C)1991ADAPTECAIC6360 " /* What all the bits do */ /* SCSISEQ */ #define TEMODEO 0x80 #define ENSELO 0x40 #define ENSELI 0x20 #define ENRESELI 0x10 #define ENAUTOATNO 0x08 #define ENAUTOATNI 0x04 #define ENAUTOATNP 0x02 #define SCSIRSTO 0x01 /* SXFRCTL0 */ #define SCSIEN 0x80 #define DMAEN 0x40 #define CHEN 0x20 #define CLRSTCNT 0x10 #define SPIOEN 0x08 #define CLRCH 0x02 /* SXFRCTL1 */ #define BITBUCKET 0x80 #define SWRAPEN 0x40 #define ENSPCHK 0x20 #define STIMESEL1 0x10 #define STIMESEL0 0x08 #define STIMO_256ms 0x00 #define STIMO_128ms 0x08 #define STIMO_64ms 0x10 #define STIMO_32ms 0x18 #define ENSTIMER 0x04 #define BYTEALIGN 0x02 /* SCSISIG (in) */ #define CDI 0x80 #define IOI 0x40 #define MSGI 0x20 #define ATNI 0x10 #define SELI 0x08 #define BSYI 0x04 #define REQI 0x02 #define ACKI 0x01 /* Important! The 3 most significant bits of this register, in initiator mode, * represents the "expected" SCSI bus phase and can be used to trigger phase * mismatch and phase change interrupts. But more important: If there is a * phase mismatch the chip will not transfer any data! This is actually a nice * feature as it gives us a bit more control over what is happening when we are * bursting data (in) through the FIFOs and the phase suddenly changes from * DATA IN to STATUS or MESSAGE IN. The transfer will stop and wait for the * proper phase to be set in this register instead of dumping the bits into the * FIFOs. */ /* SCSISIG (out) */ #define CDO 0x80 #define IOO 0x40 #define MSGO 0x20 #define ATNO 0x10 #define SELO 0x08 #define BSYO 0x04 #define REQO 0x02 #define ACKO 0x01 /* Information transfer phases */ #define PH_DATAOUT (0) #define PH_DATAIN (IOI) #define PH_CMD (CDI) #define PH_STAT (CDI | IOI) #define PH_MSGOUT (MSGI | CDI) #define PH_MSGIN (MSGI | CDI | IOI) #define PH_MASK (MSGI | CDI | IOI) #define PH_INVALID 0xff /* SCSIRATE */ #define SXFR2 0x40 #define SXFR1 0x20 #define SXFR0 0x10 #define SOFS3 0x08 #define SOFS2 0x04 #define SOFS1 0x02 #define SOFS0 0x01 /* SCSI ID */ #define OID2 0x40 #define OID1 0x20 #define OID0 0x10 #define OID_S 4 /* shift value */ #define TID2 0x04 #define TID1 0x02 #define TID0 0x01 #define SCSI_ID_MASK 0x7 /* SCSI selection/reselection ID (both target *and* initiator) */ #define SELID7 0x80 #define SELID6 0x40 #define SELID5 0x20 #define SELID4 0x10 #define SELID3 0x08 #define SELID2 0x04 #define SELID1 0x02 #define SELID0 0x01 /* CLRSINT0 Clears what? (interrupt and/or status bit) */ #define SETSDONE 0x80 #define CLRSELDO 0x40 /* I */ #define CLRSELDI 0x20 /* I+ */ #define CLRSELINGO 0x10 /* I */ #define CLRSWRAP 0x08 /* I+S */ #define CLRSDONE 0x04 /* I+S */ #define CLRSPIORDY 0x02 /* I */ #define CLRDMADONE 0x01 /* I */ /* SSTAT0 Howto clear */ #define TARGET 0x80 #define SELDO 0x40 /* Selfclearing */ #define SELDI 0x20 /* Selfclearing when CLRSELDI is set */ #define SELINGO 0x10 /* Selfclearing */ #define SWRAP 0x08 /* CLRSWAP */ #define SDONE 0x04 /* Not used in initiator mode */ #define SPIORDY 0x02 /* Selfclearing (op on SCSIDAT) */ #define DMADONE 0x01 /* Selfclearing (all FIFOs empty & T/C */ /* CLRSINT1 Clears what? */ #define CLRSELTIMO 0x80 /* I+S */ #define CLRATNO 0x40 #define CLRSCSIRSTI 0x20 /* I+S */ #define CLRBUSFREE 0x08 /* I+S */ #define CLRSCSIPERR 0x04 /* I+S */ #define CLRPHASECHG 0x02 /* I+S */ #define CLRREQINIT 0x01 /* I+S */ /* SSTAT1 How to clear? When set?*/ #define SELTO 0x80 /* C select out timeout */ #define ATNTARG 0x40 /* Not used in initiator mode */ #define SCSIRSTI 0x20 /* C RST asserted */ #define PHASEMIS 0x10 /* Selfclearing */ #define BUSFREE 0x08 /* C bus free condition */ #define SCSIPERR 0x04 /* C parity error on inbound data */ #define PHASECHG 0x02 /* C phase in SCSISIG doesn't match */ #define REQINIT 0x01 /* C or ACK asserting edge of REQ */ /* SSTAT2 */ #define SOFFSET 0x20 #define SEMPTY 0x10 #define SFULL 0x08 #define SFCNT2 0x04 #define SFCNT1 0x02 #define SFCNT0 0x01 /* SCSITEST */ #define SCTESTU 0x08 #define SCTESTD 0x04 #define STCTEST 0x01 /* SSTAT3 */ #define SCSICNT3 0x80 #define SCSICNT2 0x40 #define SCSICNT1 0x20 #define SCSICNT0 0x10 #define OFFCNT3 0x08 #define OFFCNT2 0x04 #define OFFCNT1 0x02 #define OFFCNT0 0x01 /* CLRSERR */ #define CLRSYNCERR 0x04 #define CLRFWERR 0x02 #define CLRFRERR 0x01 /* SSTAT4 */ #define SYNCERR 0x04 #define FWERR 0x02 #define FRERR 0x01 /* SIMODE0 */ #define ENSELDO 0x40 #define ENSELDI 0x20 #define ENSELINGO 0x10 #define ENSWRAP 0x08 #define ENSDONE 0x04 #define ENSPIORDY 0x02 #define ENDMADONE 0x01 /* SIMODE1 */ #define ENSELTIMO 0x80 #define ENATNTARG 0x40 #define ENSCSIRST 0x20 #define ENPHASEMIS 0x10 #define ENBUSFREE 0x08 #define ENSCSIPERR 0x04 #define ENPHASECHG 0x02 #define ENREQINIT 0x01 /* DMACNTRL0 */ #define ENDMA 0x80 #define B8MODE 0x40 #define DMA 0x20 #define DWORDPIO 0x10 #define WRITE 0x08 #define INTEN 0x04 #define RSTFIFO 0x02 #define SWINT 0x01 /* DMACNTRL1 */ #define PWRDWN 0x80 #define ENSTK32 0x40 #define STK4 0x10 #define STK3 0x08 #define STK2 0x04 #define STK1 0x02 #define STK0 0x01 /* DMASTAT */ #define ATDONE 0x80 #define WORDRDY 0x40 #define INTSTAT 0x20 #define DFIFOFULL 0x10 #define DFIFOEMP 0x08 #define DFIFOHF 0x04 #define DWORDRDY 0x02 /* BRSTCNTRL */ #define BON3 0x80 #define BON2 0x40 #define BON1 0x20 #define BON0 0x10 #define BOFF3 0x08 #define BOFF2 0x04 #define BOFF1 0x02 #define BOFF0 0x01 /* TEST */ #define BOFFTMR 0x40 #define BONTMR 0x20 #define STCNTH 0x10 #define STCNTM 0x08 #define STCNTL 0x04 #define SCSIBLK 0x02 #define DMABLK 0x01 #ifndef DDB #define Debugger() panic("should call debugger here (aic6360.c)") #endif /* ! DDB */ typedef u_long physaddr; typedef u_long physlen; struct aic_dma_seg { physaddr seg_addr; physlen seg_len; }; #define AIC_NSEG 16 /* * ACB. Holds additional information for each SCSI command Comments: We * need a separate scsi command block because we may need to overwrite it * with a request sense command. Basicly, we refrain from fiddling with * the scsi_xfer struct (except do the expected updating of return values). * We'll generally update: xs->{flags,resid,error,sense,status} and * occasionally xs->retries. */ struct aic_acb { struct scsi_generic scsi_cmd; int scsi_cmd_length; u_char *data_addr; /* Saved data pointer */ int data_length; /* Residue */ u_char target_stat; /* SCSI status byte */ /* struct aic_dma_seg dma[AIC_NSEG]; /* Physical addresses+len */ TAILQ_ENTRY(aic_acb) chain; struct scsi_xfer *xs; /* SCSI xfer ctrl block from above */ int flags; #define ACB_FREE 0 #define ACB_ACTIVE 1 #define ACB_CHKSENSE 2 #define ACB_ABORTED 3 }; /* * Some info about each (possible) target on the SCSI bus. This should * probably have been a "per target+lunit" structure, but we'll leave it at * this for now. */ struct aic_tinfo { int cmds; /* #commands processed */ int dconns; /* #disconnects */ int touts; /* #timeouts */ int perrs; /* #parity errors */ int senses; /* #request sense commands sent */ ushort lubusy; /* What local units/subr. are busy? */ u_char flags; #define DO_SYNC 0x01 /* (Re)Negotiate synchronous options */ #define DO_WIDE 0x02 /* (Re)Negotiate wide options */ u_char period; /* Period suggestion */ u_char offset; /* Offset suggestion */ u_char width; /* Width suggestion */ } tinfo_t; struct aic_softc { struct device sc_dev; struct isadev sc_id; void *sc_ih; int sc_iobase; int sc_irq, sc_drq; struct scsi_link sc_link; /* prototype for subdevs */ TAILQ_HEAD(, aic_acb) free_list, ready_list, nexus_list; struct aic_acb *sc_nexus; /* current command */ struct aic_acb sc_acb[8]; struct aic_tinfo sc_tinfo[8]; /* Data about the current nexus (updated for every cmd switch) */ u_char *sc_dp; /* Current data pointer */ size_t sc_dleft; /* Data bytes left to transfer */ u_char *sc_cp; /* Current command pointer */ size_t sc_cleft; /* Command bytes left to transfer */ /* Adapter state */ u_char sc_phase; /* Current bus phase */ u_char sc_prevphase; /* Previous bus phase */ u_char sc_state; /* State applicable to the adapter */ #define AIC_IDLE 0x01 #define AIC_SELECTING 0x02 /* SCSI command is arbiting */ #define AIC_RESELECTED 0x04 /* Has been reselected */ #define AIC_CONNECTED 0x08 /* Actively using the SCSI bus */ #define AIC_DISCONNECT 0x10 /* MSG_DISCONNECT received */ #define AIC_CMDCOMPLETE 0x20 /* MSG_CMDCOMPLETE received */ #define AIC_CLEANING 0x40 u_char sc_flags; #define AIC_DROP_MSGIN 0x01 /* Discard all msgs (parity err detected) */ #define AIC_ABORTING 0x02 /* Bailing out */ #define AIC_DOINGDMA 0x04 /* The FIFO data path is active! */ u_char sc_selid; /* Reselection ID */ /* Message stuff */ u_char sc_msgpriq; /* Messages we want to send */ u_char sc_msgoutq; /* Messages sent during last MESSAGE OUT */ u_char sc_lastmsg; /* Message last transmitted */ u_char sc_currmsg; /* Message currently ready to transmit */ #define SEND_DEV_RESET 0x01 #define SEND_PARITY_ERROR 0x02 #define SEND_ABORT 0x04 #define SEND_REJECT 0x08 #define SEND_INIT_DET_ERR 0x10 #define SEND_IDENTIFY 0x20 #define SEND_SDTR 0x40 #define SEND_WDTR 0x80 #define AIC_MAX_MSG_LEN 8 u_char sc_omess[AIC_MAX_MSG_LEN]; u_char *sc_omp; /* Outgoing message pointer */ u_char sc_imess[AIC_MAX_MSG_LEN]; u_char *sc_imp; /* Incoming message pointer */ /* Hardware stuff */ int sc_initiator; /* Our scsi id */ int sc_freq; /* Clock frequency in MHz */ int sc_minsync; /* Minimum sync period / 4 */ int sc_maxsync; /* Maximum sync period / 4 */ }; #if AIC_DEBUG #define AIC_SHOWACBS 0x01 #define AIC_SHOWINTS 0x02 #define AIC_SHOWCMDS 0x04 #define AIC_SHOWMISC 0x08 #define AIC_SHOWTRACE 0x10 #define AIC_SHOWSTART 0x20 #define AIC_DOBREAK 0x40 int aic_debug = 0x00; /* AIC_SHOWSTART|AIC_SHOWMISC|AIC_SHOWTRACE; /**/ #define AIC_PRINT(b, s) do {if ((aic_debug & (b)) != 0) printf s;} while (0) #define AIC_BREAK() do {if ((aic_debug & AIC_DOBREAK) != 0) Debugger();} while (0) #define AIC_ASSERT(x) do {if (x) {} else {printf("%s at line %d: assertion failed\n", sc->sc_dev.dv_xname, __LINE__); Debugger();}} while (0) #else #define AIC_PRINT(b, s) #define AIC_BREAK() #define AIC_ASSERT(x) #endif #define AIC_ACBS(s) AIC_PRINT(AIC_SHOWACBS, s) #define AIC_INTS(s) AIC_PRINT(AIC_SHOWINTS, s) #define AIC_CMDS(s) AIC_PRINT(AIC_SHOWCMDS, s) #define AIC_MISC(s) AIC_PRINT(AIC_SHOWMISC, s) #define AIC_TRACE(s) AIC_PRINT(AIC_SHOWTRACE, s) #define AIC_START(s) AIC_PRINT(AIC_SHOWSTART, s) int aicprobe __P((struct device *, void *, void *)); void aicattach __P((struct device *, struct device *, void *)); int aicprint __P((void *, char *)); void aic_minphys __P((struct buf *)); int aicintr __P((void *)); void aic_init __P((struct aic_softc *)); void aic_done __P((struct aic_softc *, struct aic_acb *)); void aic_dequeue __P((struct aic_softc *, struct aic_acb *)); int aic_scsi_cmd __P((struct scsi_xfer *)); int aic_poll __P((struct aic_softc *, struct scsi_xfer *, int)); void aic_select __P((struct aic_softc *, struct aic_acb *)); void aic_timeout __P((void *)); int aic_find __P((struct aic_softc *)); void aic_sched __P((struct aic_softc *)); void aic_scsi_reset __P((struct aic_softc *)); void aic_reset __P((struct aic_softc *)); #if AIC_DEBUG void aic_print_active_acb(); void aic_dump_driver(); void aic_dump6360(); #endif struct cfdriver aiccd = { NULL, "aic", aicprobe, aicattach, DV_DULL, sizeof(struct aic_softc) }; struct scsi_adapter aic_switch = { aic_scsi_cmd, aic_minphys, 0, 0, }; struct scsi_device aic_dev = { NULL, /* Use default error handler */ NULL, /* have a queue, served by this */ NULL, /* have no async handler */ NULL, /* Use default 'done' routine */ }; /* * INITIALIZATION ROUTINES (probe, attach ++) */ /* * aicprobe: probe for AIC6360 SCSI-controller * returns non-zero value if a controller is found. */ int aicprobe(parent, match, aux) struct device *parent; void *match, *aux; { struct aic_softc *sc = match; struct isa_attach_args *ia = aux; int i, len, ic; #ifdef NEWCONFIG if (ia->ia_iobase == IOBASEUNK) return 0; #endif sc->sc_iobase = ia->ia_iobase; if (aic_find(sc) != 0) return 0; #ifdef NEWCONFIG if (ia->ia_irq != IRQUNK) { if (ia->ia_irq != sc->sc_irq) { printf("%s: irq mismatch; kernel configured %d != board configured %d\n", sc->sc_dev.dv_xname, ia->ia_irq, sc->sc_irq); return 0; } } else ia->ia_irq = sc->sc_irq; if (ia->ia_drq != DRQUNK) { if (ia->ia_drq != sc->sc_drq) { printf("%s: drq mismatch; kernel configured %d != board configured %d\n", sc->sc_dev.dv_xname, ia->ia_drq, sc->sc_drq); return 0; } } else ia->ia_drq = sc->sc_drq; #endif ia->ia_msize = 0; ia->ia_iosize = 0x20; return 1; } /* Do the real search-for-device. * Prerequisite: sc->sc_iobase should be set to the proper value */ int aic_find(sc) struct aic_softc *sc; { char chip_id[sizeof(IDSTRING)]; /* For chips that support it */ char *start; int i; /* Remove aic6360 from possible powerdown mode */ outb(DMACNTRL0, 0); /* Thanks to mark@aggregate.com for the new method for detecting * whether the chip is present or not. Bonus: may also work for * the AIC-6260! */ AIC_TRACE(("aic: probing for aic-chip at port 0x%x\n", sc->sc_iobase)); /* * Linux also init's the stack to 1-16 and then clears it, * 6260's don't appear to have an ID reg - mpg */ /* Push the sequence 0,1,..,15 on the stack */ #define STSIZE 16 outb(DMACNTRL1, 0); /* Reset stack pointer */ for (i = 0; i < STSIZE; i++) outb(STACK, i); /* See if we can pull out the same sequence */ outb(DMACNTRL1, 0); for (i = 0; i < STSIZE && inb(STACK) == i; i++) ; if (i != STSIZE) { AIC_START(("STACK futzed at %d.\n", i)); return ENXIO; } /* See if we can pull the id string out of the ID register, * now only used for informational purposes. */ bzero(chip_id, sizeof(chip_id)); insb(ID, chip_id, sizeof(IDSTRING)-1); AIC_START(("AIC found at 0x%x ", sc->sc_iobase)); AIC_START(("ID: %s ",chip_id)); AIC_START(("chip revision %d\n",(int)inb(REV))); sc->sc_initiator = 7; sc->sc_freq = 20; /* XXXX Assume 20 MHz. */ /* * These are the bounds of the sync period, based on the frequency of * the chip's clock input and the size and offset of the sync period * register. * * For a 20Mhz clock, this gives us 25, or 100nS, or 10MB/s, as a * maximum transfer rate, and 112.5, or 450nS, or 2.22MB/s, as a * minimum transfer rate. */ sc->sc_minsync = (2 * 250) / sc->sc_freq; sc->sc_maxsync = (9 * 250) / sc->sc_freq; return 0; } int aicprint(aux, name) void *aux; char *name; { if (name != NULL) printf("%s: scsibus ", name); return UNCONF; } /* * Attach the AIC6360, fill out some high and low level data structures */ void aicattach(parent, self, aux) struct device *parent, *self; void *aux; { struct isa_attach_args *ia = aux; struct aic_softc *sc = (void *)self; AIC_TRACE(("aicattach ")); sc->sc_state = 0; aic_init(sc); /* Init chip and driver */ /* * Fill in the prototype scsi_link */ sc->sc_link.adapter_softc = sc; sc->sc_link.adapter_target = sc->sc_initiator; sc->sc_link.adapter = &aic_switch; sc->sc_link.device = &aic_dev; sc->sc_link.openings = 2; printf("\n"); #ifdef NEWCONFIG isa_establish(&sc->sc_id, &sc->sc_dev); #endif sc->sc_ih = isa_intr_establish(ia->ia_irq, IST_EDGE, IPL_BIO, aicintr, sc); config_found(self, &sc->sc_link, aicprint); } /* Initialize AIC6360 chip itself * The following conditions should hold: * aicprobe should have succeeded, i.e. the iobase address in aic_softc must * be valid. */ void aic_reset(sc) struct aic_softc *sc; { outb(SCSITEST, 0); /* Doc. recommends to clear these two */ outb(TEST, 0); /* registers before operations commence */ /* Reset SCSI-FIFO and abort any transfers */ outb(SXFRCTL0, CHEN|CLRCH|CLRSTCNT); /* Reset DMA-FIFO */ outb(DMACNTRL0, RSTFIFO); outb(DMACNTRL1, 0); outb(SCSISEQ, 0); /* Disable all selection features */ outb(SXFRCTL1, 0); outb(SIMODE0, 0x00); /* Disable some interrupts */ outb(CLRSINT0, 0x7f); /* Clear a slew of interrupts */ outb(SIMODE1, 0x00); /* Disable some more interrupts */ outb(CLRSINT1, 0xef); /* Clear another slew of interrupts */ outb(SCSIRATE, 0); /* Disable synchronous transfers */ outb(CLRSERR, 0x07); /* Haven't seen ant errors (yet) */ outb(SCSIID, sc->sc_initiator << OID_S); /* Set our SCSI-ID */ outb(BRSTCNTRL, EISA_BRST_TIM); } /* Pull the SCSI RST line for 500 us */ void aic_scsi_reset(sc) struct aic_softc *sc; { outb(SCSISEQ, SCSIRSTO); delay(500); outb(SCSISEQ, 0); delay(50); } /* * Initialize aic SCSI driver. */ void aic_init(sc) struct aic_softc *sc; { struct aic_acb *acb; int r; aic_reset(sc); aic_scsi_reset(sc); aic_reset(sc); if (sc->sc_state == 0) { /* First time through; initialize. */ TAILQ_INIT(&sc->ready_list); TAILQ_INIT(&sc->nexus_list); TAILQ_INIT(&sc->free_list); sc->sc_nexus = NULL; acb = sc->sc_acb; bzero(acb, sizeof(sc->sc_acb)); for (r = 0; r < sizeof(sc->sc_acb) / sizeof(*acb); r++) { TAILQ_INSERT_TAIL(&sc->free_list, acb, chain); acb++; } bzero(&sc->sc_tinfo, sizeof(sc->sc_tinfo)); } else { /* Cancel any active commands. */ sc->sc_state = AIC_CLEANING; if ((acb = sc->sc_nexus) != NULL) { acb->xs->error = XS_DRIVER_STUFFUP; untimeout(aic_timeout, acb); aic_done(sc, acb); } while (acb = sc->nexus_list.tqh_first) { acb->xs->error = XS_DRIVER_STUFFUP; untimeout(aic_timeout, acb); aic_done(sc, acb); } } sc->sc_prevphase = PH_INVALID; for (r = 0; r < 8; r++) { struct aic_tinfo *ti = &sc->sc_tinfo[r]; ti->flags = 0; #if AIC_USE_SYNCHRONOUS ti->flags |= DO_SYNC; ti->period = sc->sc_minsync; ti->offset = AIC_SYNC_REQ_ACK_OFS; #else ti->period = ti->offset = 0; #endif #if AIC_USE_WIDE ti->flags |= DO_WIDE; ti->width = AIC_MAX_WIDTH; #else ti->width = 0; #endif } sc->sc_state = AIC_IDLE; outb(DMACNTRL0, INTEN); } void aic_free_acb(sc, acb, flags) struct aic_softc *sc; struct aic_acb *acb; int flags; { int s; s = splbio(); acb->flags = ACB_FREE; TAILQ_INSERT_HEAD(&sc->free_list, acb, chain); /* * If there were none, wake anybody waiting for one to come free, * starting with queued entries. */ if (acb->chain.tqe_next == 0) wakeup(&sc->free_list); splx(s); } struct aic_acb * aic_get_acb(sc, flags) struct aic_softc *sc; int flags; { struct aic_acb *acb; int s; s = splbio(); while ((acb = sc->free_list.tqh_first) == NULL && (flags & SCSI_NOSLEEP) == 0) tsleep(&sc->free_list, PRIBIO, "aicacb", 0); if (acb) { TAILQ_REMOVE(&sc->free_list, acb, chain); acb->flags = ACB_ACTIVE; } splx(s); return acb; } /* * DRIVER FUNCTIONS CALLABLE FROM HIGHER LEVEL DRIVERS */ /* * Expected sequence: * 1) Command inserted into ready list * 2) Command selected for execution * 3) Command won arbitration and has selected target device * 4) Send message out (identify message, eventually also sync.negotiations) * 5) Send command * 5a) Receive disconnect message, disconnect. * 5b) Reselected by target * 5c) Receive identify message from target. * 6) Send or receive data * 7) Receive status * 8) Receive message (command complete etc.) * 9) If status == SCSI_CHECK construct a synthetic request sense SCSI cmd. * Repeat 2-8 (no disconnects please...) */ /* * Start a SCSI-command * This function is called by the higher level SCSI-driver to queue/run * SCSI-commands. */ int aic_scsi_cmd(xs) struct scsi_xfer *xs; { struct scsi_link *sc_link = xs->sc_link; struct aic_softc *sc = sc_link->adapter_softc; struct aic_acb *acb; int s, flags; AIC_TRACE(("aic_scsi_cmd ")); AIC_CMDS(("[0x%x, %d]->%d ", (int)xs->cmd->opcode, xs->cmdlen, sc_link->target)); flags = xs->flags; if ((flags & (ITSDONE|INUSE)) != INUSE) { printf("%s: done or not in use?\n", sc->sc_dev.dv_xname); xs->flags &= ~ITSDONE; xs->flags |= INUSE; } if ((acb = aic_get_acb(sc, flags)) == NULL) { xs->error = XS_DRIVER_STUFFUP; return TRY_AGAIN_LATER; } /* Initialize acb */ acb->xs = xs; bcopy(xs->cmd, &acb->scsi_cmd, xs->cmdlen); acb->scsi_cmd_length = xs->cmdlen; acb->data_addr = xs->data; acb->data_length = xs->datalen; acb->target_stat = 0; s = splbio(); TAILQ_INSERT_TAIL(&sc->ready_list, acb, chain); if (sc->sc_state == AIC_IDLE) aic_sched(sc); if ((flags & SCSI_POLL) == 0) { /* Almost done. Wait outside */ timeout(aic_timeout, acb, (xs->timeout * hz) / 1000); splx(s); return SUCCESSFULLY_QUEUED; } splx(s); /* Not allowed to use interrupts, use polling instead */ if (aic_poll(sc, xs, xs->timeout)) { aic_timeout(acb); if (aic_poll(sc, xs, 2000)) aic_timeout(acb); } return COMPLETE; } /* * Adjust transfer size in buffer structure */ void aic_minphys(bp) struct buf *bp; { AIC_TRACE(("aic_minphys ")); if (bp->b_bcount > (AIC_NSEG << PGSHIFT)) bp->b_bcount = (AIC_NSEG << PGSHIFT); minphys(bp); } /* * Used when interrupt driven I/O isn't allowed, e.g. during boot. */ int aic_poll(sc, xs, count) struct aic_softc *sc; struct scsi_xfer *xs; int count; { AIC_TRACE(("aic_poll ")); while (count) { /* * If we had interrupts enabled, would we * have got an interrupt? */ if ((inb(DMASTAT) & INTSTAT) != 0) aicintr(sc); if ((xs->flags & ITSDONE) != 0) return 0; delay(1000); count--; } return 1; } /* * LOW LEVEL SCSI UTILITIES */ #define aic_sched_msgout(m) \ do { \ if (sc->sc_msgpriq == 0) \ outb(SCSISIG, sc->sc_phase|ATNO); \ sc->sc_msgpriq |= (m); \ } while (0) #if AIC_USE_SYNCHRONOUS /* * Set synchronous transfer offset and period. */ static inline void aic_setsync(sc, ti) struct aic_softc *sc; struct aic_tinfo *ti; { if (ti->offset != 0) outb(SCSIRATE, ((ti->period * sc->sc_freq) / 250 - 2) << 4 | ti->offset); else outb(SCSIRATE, 0); } #else #define aic_setsync(sc, ti) #endif /* * Start a selection. This is used by aic_sched() to select an idle target, * and by aic_done() to immediately reselect a target to get sense information. */ void aic_select(sc, acb) struct aic_softc *sc; struct aic_acb *acb; { struct scsi_link *sc_link = acb->xs->sc_link; int target = sc_link->target; struct aic_tinfo *ti = &sc->sc_tinfo[target]; outb(SCSIID, sc->sc_initiator << OID_S | target); aic_setsync(sc, ti); outb(SXFRCTL1, STIMO_256ms|ENSTIMER); /* Always enable reselections. */ outb(SIMODE0, ENSELDI|ENSELDO); outb(SIMODE1, ENSCSIRST|ENSELTIMO); outb(SCSISEQ, ENRESELI|ENSELO|ENAUTOATNO); sc->sc_state = AIC_SELECTING; } int aic_reselect(sc, message) struct aic_softc *sc; u_char message; { u_char selid, target, lun; struct aic_acb *acb; struct scsi_link *sc_link; struct aic_tinfo *ti; /* * The SCSI chip made a snapshot of the data bus while the reselection * was being negotiated. This enables us to determine which target did * the reselect. */ selid = sc->sc_selid & ~(1 << sc->sc_initiator); if (selid & (selid - 1)) { printf("%s: reselect with invalid selid %02x; sending DEVICE RESET\n", sc->sc_dev.dv_xname, selid); AIC_BREAK(); goto reset; } /* Search wait queue for disconnected cmd * The list should be short, so I haven't bothered with * any more sophisticated structures than a simple * singly linked list. */ target = ffs(selid) - 1; lun = message & 0x07; for (acb = sc->nexus_list.tqh_first; acb != NULL; acb = acb->chain.tqe_next) { sc_link = acb->xs->sc_link; if (sc_link->target == target && sc_link->lun == lun) break; } if (acb == NULL) { printf("%s: reselect from target %d lun %d with no nexus; sending ABORT\n", sc->sc_dev.dv_xname, target, lun); AIC_BREAK(); goto abort; } /* Make this nexus active again. */ TAILQ_REMOVE(&sc->nexus_list, acb, chain); sc->sc_state = AIC_CONNECTED; sc->sc_nexus = acb; ti = &sc->sc_tinfo[target]; ti->lubusy |= (1 << lun); aic_setsync(sc, ti); /* Do an implicit RESTORE POINTERS. */ sc->sc_dp = acb->data_addr; sc->sc_dleft = acb->data_length; sc->sc_cp = (u_char *)&acb->scsi_cmd; sc->sc_cleft = acb->scsi_cmd_length; return (0); reset: sc->sc_flags |= AIC_ABORTING; aic_sched_msgout(SEND_DEV_RESET); return (1); abort: sc->sc_flags |= AIC_ABORTING; aic_sched_msgout(SEND_ABORT); return (1); } /* * Schedule a SCSI operation. This has now been pulled out of the interrupt * handler so that we may call it from aic_scsi_cmd and aic_done. This may * save us an unecessary interrupt just to get things going. Should only be * called when state == AIC_IDLE and at bio pl. */ void aic_sched(sc) register struct aic_softc *sc; { struct aic_acb *acb; struct scsi_link *sc_link; struct aic_tinfo *ti; /* * Find first acb in ready queue that is for a target/lunit pair that * is not busy. */ outb(CLRSINT1, CLRSELTIMO|CLRBUSFREE|CLRSCSIPERR); for (acb = sc->ready_list.tqh_first; acb != NULL; acb = acb->chain.tqe_next) { sc_link = acb->xs->sc_link; ti = &sc->sc_tinfo[sc_link->target]; if ((ti->lubusy & (1 << sc_link->lun)) == 0) { AIC_MISC(("selecting %d:%d ", sc_link->target, sc_link->lun)); TAILQ_REMOVE(&sc->ready_list, acb, chain); sc->sc_nexus = acb; aic_select(sc, acb); return; } else AIC_MISC(("%d:%d busy\n", sc_link->target, sc_link->lun)); } AIC_MISC(("idle ")); /* Nothing to start; just enable reselections and wait. */ outb(SIMODE0, ENSELDI); outb(SIMODE1, ENSCSIRST); outb(SCSISEQ, ENRESELI); } /* * POST PROCESSING OF SCSI_CMD (usually current) */ void aic_done(sc, acb) struct aic_softc *sc; struct aic_acb *acb; { struct scsi_xfer *xs = acb->xs; struct scsi_link *sc_link = xs->sc_link; struct aic_tinfo *ti = &sc->sc_tinfo[sc_link->target]; AIC_TRACE(("aic_done ")); /* * Now, if we've come here with no error code, i.e. we've kept the * initial XS_NOERROR, and the status code signals that we should * check sense, we'll need to set up a request sense cmd block and * push the command back into the ready queue *before* any other * commands for this target/lunit, else we lose the sense info. * We don't support chk sense conditions for the request sense cmd. */ if (xs->error == XS_NOERROR) { if (acb->flags == ACB_ABORTED) { xs->error = XS_DRIVER_STUFFUP; } else if (acb->flags == ACB_CHKSENSE) { xs->error = XS_SENSE; } else if (acb->target_stat == SCSI_CHECK) { struct scsi_sense *ss = (void *)&acb->scsi_cmd; AIC_MISC(("requesting sense ")); /* First, save the return values */ xs->resid = acb->data_length; xs->status = acb->target_stat; /* Next, setup a request sense command block */ bzero(ss, sizeof(*ss)); ss->opcode = REQUEST_SENSE; ss->byte2 = sc_link->lun << 5; ss->length = sizeof(struct scsi_sense_data); acb->scsi_cmd_length = sizeof(*ss); acb->data_addr = (char *)&xs->sense; acb->data_length = sizeof(struct scsi_sense_data); acb->flags = ACB_CHKSENSE; ti->senses++; ti->lubusy &= ~(1<lun); if (acb == sc->sc_nexus) { aic_select(sc, acb); } else { TAILQ_INSERT_HEAD(&sc->ready_list, acb, chain); } return; } else { xs->resid = acb->data_length; } } xs->flags |= ITSDONE; #if AIC_DEBUG if ((aic_debug & AIC_SHOWMISC) != 0) { if (xs->resid != 0) printf("resid=%d ", xs->resid); if (xs->error == XS_SENSE) printf("sense=0x%02x\n", xs->sense.error_code); else printf("error=%d\n", xs->error); } #endif /* * Remove the ACB from whatever queue it's on. We have to do a bit of * a hack to figure out which queue it's on. Note that it is *not* * necessary to cdr down the ready queue, but we must cdr down the * nexus queue and see if it's there, so we can mark the unit as no * longer busy. This code is sickening, but it works. */ if (acb == sc->sc_nexus) { ti->lubusy &= ~(1 << sc_link->lun); sc->sc_state = AIC_IDLE; sc->sc_nexus = NULL; aic_sched(sc); } else aic_dequeue(sc, acb); aic_free_acb(sc, acb, xs->flags); ti->cmds++; scsi_done(xs); } void aic_dequeue(sc, acb) struct aic_softc *sc; struct aic_acb *acb; { struct scsi_link *sc_link = acb->xs->sc_link; struct aic_tinfo *ti = &sc->sc_tinfo[sc_link->target]; if (sc->ready_list.tqh_last == &acb->chain.tqe_next) { TAILQ_REMOVE(&sc->ready_list, acb, chain); } else { register struct aic_acb *acb2; for (acb2 = sc->nexus_list.tqh_first; acb2 != NULL; acb2 = acb2->chain.tqe_next) { if (acb2 == acb) break; } if (acb2 != NULL) { TAILQ_REMOVE(&sc->nexus_list, acb, chain); ti->lubusy &= ~(1 << sc_link->lun); } else if (acb->chain.tqe_next) { TAILQ_REMOVE(&sc->ready_list, acb, chain); } else { printf("%s: can't find matching acb\n", sc->sc_dev.dv_xname); Debugger(); } } } /* * INTERRUPT/PROTOCOL ENGINE */ #define IS1BYTEMSG(m) (((m) != 0x01 && (m) < 0x20) || (m) >= 0x80) #define IS2BYTEMSG(m) (((m) & 0xf0) == 0x20) #define ISEXTMSG(m) ((m) == 0x01) /* * Precondition: * The SCSI bus is already in the MSGI phase and there is a message byte * on the bus, along with an asserted REQ signal. */ int aic_msgin(sc) register struct aic_softc *sc; { u_char sstat1; int n; AIC_TRACE(("aic_msgin ")); if (sc->sc_prevphase == PH_MSGIN) { /* This is a continuation of the previous message. */ n = sc->sc_imp - sc->sc_imess; goto nextbyte; } /* This is a new MESSAGE IN phase. Clean up our state. */ sc->sc_flags &= ~AIC_DROP_MSGIN; nextmsg: n = 0; sc->sc_imp = &sc->sc_imess[n]; nextbyte: /* * Read a whole message, but don't ack the last byte. If we reject the * message, we have to assert ATN during the message transfer phase * itself. */ for (;;) { for (;;) { sstat1 = inb(SSTAT1); if ((sstat1 & (REQINIT|BUSFREE)) != 0) break; /* Wait for REQINIT. XXX Need timeout. */ } if ((sstat1 & (PHASECHG|BUSFREE)) != 0) { /* * Target left MESSAGE IN, probably because it * a) noticed our ATN signal, or * b) ran out of messages. */ return (1); } /* If parity error, just dump everything on the floor. */ if ((sstat1 & SCSIPERR) != 0) { aic_sched_msgout(SEND_PARITY_ERROR); sc->sc_flags |= AIC_DROP_MSGIN; } /* Gather incoming message bytes if needed. */ if ((sc->sc_flags & AIC_DROP_MSGIN) == 0) { if (n >= AIC_MAX_MSG_LEN) { (void) inb(SCSIDAT); aic_sched_msgout(SEND_REJECT); sc->sc_flags |= AIC_DROP_MSGIN; } else { *sc->sc_imp++ = inb(SCSIDAT); n++; /* * This testing is suboptimal, but most * messages will be of the one byte variety, so * it should not affect performance * significantly. */ if (n == 1 && IS1BYTEMSG(sc->sc_imess[0])) break; if (n == 2 && IS2BYTEMSG(sc->sc_imess[0])) break; if (n >= 3 && ISEXTMSG(sc->sc_imess[0]) && n == sc->sc_imess[1] + 2) break; } } else (void) inb(SCSIDAT); /* * If we reach this spot we're either: * a) in the middle of a multi-byte message, or * b) dropping bytes. */ outb(SXFRCTL0, CHEN|SPIOEN); /* Ack the last byte read. */ (void) inb(SCSIDAT); outb(SXFRCTL0, CHEN); while ((inb(SCSISIG) & ACKI) != 0) ; } AIC_MISC(("n=%d imess=0x%02x ", n, sc->sc_imess[0])); /* We now have a complete message. Parse it. */ switch (sc->sc_state) { struct aic_acb *acb; struct scsi_link *sc_link; struct aic_tinfo *ti; case AIC_CONNECTED: AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; ti = &sc->sc_tinfo[acb->xs->sc_link->target]; switch (sc->sc_imess[0]) { case MSG_CMDCOMPLETE: if (sc->sc_dleft < 0) { sc_link = acb->xs->sc_link; printf("%s: %d extra bytes from %d:%d\n", sc->sc_dev.dv_xname, -sc->sc_dleft, sc_link->target, sc_link->lun); acb->data_length = 0; } acb->xs->resid = acb->data_length = sc->sc_dleft; sc->sc_state = AIC_CMDCOMPLETE; break; case MSG_PARITY_ERROR: /* Resend the last message. */ aic_sched_msgout(sc->sc_lastmsg); break; case MSG_MESSAGE_REJECT: AIC_MISC(("message rejected %02x ", sc->sc_lastmsg)); switch (sc->sc_lastmsg) { #if AIC_USE_SYNCHRONOUS + AIC_USE_WIDE case SEND_IDENTIFY: ti->flags &= ~(DO_SYNC|DO_WIDE); ti->period = ti->offset = 0; aic_setsync(sc, ti); ti->width = 0; break; #endif #if AIC_USE_SYNCHRONOUS case SEND_SDTR: ti->flags &= ~DO_SYNC; ti->period = ti->offset = 0; aic_setsync(sc, ti); break; #endif #if AIC_USE_WIDE case SEND_WDTR: ti->flags &= ~DO_WIDE; ti->width = 0; break; #endif case SEND_INIT_DET_ERR: sc->sc_flags |= AIC_ABORTING; aic_sched_msgout(SEND_ABORT); break; } break; case MSG_NOOP: break; case MSG_DISCONNECT: ti->dconns++; sc->sc_state = AIC_DISCONNECT; break; case MSG_SAVEDATAPOINTER: acb->data_addr = sc->sc_dp; acb->data_length = sc->sc_dleft; break; case MSG_RESTOREPOINTERS: sc->sc_dp = acb->data_addr; sc->sc_dleft = acb->data_length; sc->sc_cp = (u_char *)&acb->scsi_cmd; sc->sc_cleft = acb->scsi_cmd_length; break; case MSG_EXTENDED: switch (sc->sc_imess[2]) { #if AIC_USE_SYNCHRONOUS case MSG_EXT_SDTR: if (sc->sc_imess[1] != 3) goto reject; ti->period = sc->sc_imess[3]; ti->offset = sc->sc_imess[4]; ti->flags &= ~DO_SYNC; if (ti->offset == 0) { } else if (ti->period < sc->sc_minsync || ti->period > sc->sc_maxsync || ti->offset > 8) { ti->period = ti->offset = 0; aic_sched_msgout(SEND_SDTR); } else { sc_print_addr(acb->xs->sc_link); printf("sync, offset %d, period %dnsec\n", ti->offset, ti->period * 4); } aic_setsync(sc, ti); break; #endif #if AIC_USE_WIDE case MSG_EXT_WDTR: if (sc->sc_imess[1] != 2) goto reject; ti->width = sc->sc_imess[3]; ti->flags &= ~DO_WIDE; if (ti->width == 0) { } else if (ti->width > AIC_MAX_WIDTH) { ti->width = 0; aic_sched_msgout(SEND_WDTR); } else { sc_print_addr(acb->xs->sc_link); printf("wide, width %d\n", 1 << (3 + ti->width)); } break; #endif default: printf("%s: unrecognized MESSAGE EXTENDED; sending REJECT\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto reject; } break; default: printf("%s: unrecognized MESSAGE; sending REJECT\n", sc->sc_dev.dv_xname); AIC_BREAK(); reject: aic_sched_msgout(SEND_REJECT); break; } break; case AIC_RESELECTED: if (!MSG_ISIDENTIFY(sc->sc_imess[0])) { printf("%s: reselect without IDENTIFY; sending DEVICE RESET\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto reset; } (void) aic_reselect(sc, sc->sc_imess[0]); break; default: printf("%s: unexpected MESSAGE IN; sending DEVICE RESET\n", sc->sc_dev.dv_xname); AIC_BREAK(); reset: sc->sc_flags |= AIC_ABORTING; aic_sched_msgout(SEND_DEV_RESET); break; abort: sc->sc_flags |= AIC_ABORTING; aic_sched_msgout(SEND_ABORT); break; } outb(SXFRCTL0, CHEN|SPIOEN); /* Ack the last message byte. */ (void) inb(SCSIDAT); outb(SXFRCTL0, CHEN); while ((inb(SCSISIG) & ACKI) != 0) ; /* Go get the next message, if any. */ goto nextmsg; out: AIC_MISC(("n=%d imess=0x%02x ", n, sc->sc_imess[0])); return (0); } /* * Send the highest priority, scheduled message. */ void aic_msgout(sc) register struct aic_softc *sc; { struct aic_acb *acb; struct aic_tinfo *ti; u_char sstat1; int n; AIC_TRACE(("aic_msgout ")); /* * Set ATN. If we're just sending a trivial 1-byte message, we'll * clear ATN later on anyway. */ outb(SCSISIG, PH_MSGOUT|ATNO); /* Reset the FIFO. */ outb(DMACNTRL0, RSTFIFO); /* Enable REQ/ACK protocol. */ outb(SXFRCTL0, CHEN|SPIOEN); if (sc->sc_prevphase == PH_MSGOUT) { if (sc->sc_omp == sc->sc_omess) { /* * This is a retransmission. * * We get here if the target stayed in MESSAGE OUT * phase. Section 5.1.9.2 of the SCSI 2 spec indicates * that all of the previously transmitted messages must * be sent again, in the same order. Therefore, we * requeue all the previously transmitted messages, and * start again from the top. Our simple priority * scheme keeps the messages in the right order. */ AIC_MISC(("retransmitting ")); sc->sc_msgpriq |= sc->sc_msgoutq; } else { /* This is a continuation of the previous message. */ n = sc->sc_omp - sc->sc_omess; goto nextbyte; } } /* No messages transmitted so far. */ sc->sc_msgoutq = 0; sc->sc_lastmsg = 0; nextmsg: /* Pick up highest priority message. */ sc->sc_currmsg = sc->sc_msgpriq & -sc->sc_msgpriq; sc->sc_msgpriq &= ~sc->sc_currmsg; sc->sc_msgoutq |= sc->sc_currmsg; /* Build the outgoing message data. */ switch (sc->sc_currmsg) { case SEND_IDENTIFY: if (sc->sc_state != AIC_CONNECTED) { printf("%s: SEND_IDENTIFY while not connected; sending NOOP\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto noop; } AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; sc->sc_omess[0] = MSG_IDENTIFY(acb->xs->sc_link->lun, 1); n = 1; break; #if AIC_USE_SYNCHRONOUS case SEND_SDTR: if (sc->sc_state != AIC_CONNECTED) { printf("%s: SEND_SDTR while not connected; sending NOOP\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto noop; } AIC_ASSERT(sc->sc_nexus != NULL); ti = &sc->sc_tinfo[sc->sc_nexus->xs->sc_link->target]; sc->sc_omess[4] = MSG_EXTENDED; sc->sc_omess[3] = 3; sc->sc_omess[2] = MSG_EXT_SDTR; sc->sc_omess[1] = ti->period >> 2; sc->sc_omess[0] = ti->offset; n = 5; break; #endif #if AIC_USE_WIDE case SEND_WDTR: if (sc->sc_state != AIC_CONNECTED) { printf("%s: SEND_WDTR while not connected; sending NOOP\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto noop; } AIC_ASSERT(sc->sc_nexus != NULL); ti = &sc->sc_tinfo[sc->sc_nexus->xs->sc_link->target]; sc->sc_omess[3] = MSG_EXTENDED; sc->sc_omess[2] = 2; sc->sc_omess[1] = MSG_EXT_WDTR; sc->sc_omess[0] = ti->width; n = 4; break; #endif case SEND_DEV_RESET: sc->sc_omess[0] = MSG_BUS_DEV_RESET; n = 1; break; case SEND_REJECT: sc->sc_omess[0] = MSG_MESSAGE_REJECT; n = 1; break; case SEND_PARITY_ERROR: sc->sc_omess[0] = MSG_PARITY_ERROR; n = 1; break; case SEND_INIT_DET_ERR: sc->sc_omess[0] = MSG_INITIATOR_DET_ERR; n = 1; break; case SEND_ABORT: sc->sc_omess[0] = MSG_ABORT; n = 1; break; case 0: #ifdef AIC_PICKY printf("%s: unexpected MESSAGE OUT; sending NOOP\n", sc->sc_dev.dv_xname); AIC_BREAK(); #endif noop: sc->sc_omess[0] = MSG_NOOP; n = 1; break; default: printf("%s: weird MESSAGE OUT; sending NOOP\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto noop; } sc->sc_omp = &sc->sc_omess[n]; nextbyte: /* Send message bytes. */ for (;;) { for (;;) { sstat1 = inb(SSTAT1); if ((sstat1 & (REQINIT|BUSFREE)) != 0) break; /* Wait for REQINIT. XXX Need timeout. */ } if ((sstat1 & (PHASECHG|BUSFREE)) != 0) { /* * Target left MESSAGE OUT, possibly to reject * our message. */ goto out; } /* Clear ATN before last byte if this is the last message. */ if (n == 1 && sc->sc_msgpriq == 0) outb(CLRSINT1, CLRATNO); /* Send message byte. */ outb(SCSIDAT, *--sc->sc_omp); --n; /* Keep track of the last message we've sent any bytes of. */ sc->sc_lastmsg = sc->sc_currmsg; /* Wait for ACK to be negated. XXX Need timeout. */ while ((inb(SCSISIG) & ACKI) != 0) ; if (n == 0) break; } /* We get here only if the entire message has been transmitted. */ if (sc->sc_msgpriq != 0) { /* There are more outgoing messages. */ goto nextmsg; } /* * The last message has been transmitted. We need to remember the last * message transmitted (in case the target switches to MESSAGE IN phase * and sends a MESSAGE REJECT), and the list of messages transmitted * this time around (in case the target stays in MESSAGE OUT phase to * request a retransmit). */ out: /* Disable REQ/ACK protocol. */ outb(SXFRCTL0, CHEN); } /* aic_dataout_pio: perform a data transfer using the FIFO datapath in the aic6360 * Precondition: The SCSI bus should be in the DOUT phase, with REQ asserted * and ACK deasserted (i.e. waiting for a data byte) * This new revision has been optimized (I tried) to make the common case fast, * and the rarer cases (as a result) somewhat more comlex */ int aic_dataout_pio(sc, p, n) register struct aic_softc *sc; u_char *p; int n; { register u_char dmastat; int out = 0; #define DOUTAMOUNT 128 /* Full FIFO */ /* Clear host FIFO and counter. */ outb(DMACNTRL0, RSTFIFO|WRITE); /* Enable FIFOs. */ outb(SXFRCTL0, SCSIEN|DMAEN|CHEN); outb(DMACNTRL0, ENDMA|DWORDPIO|WRITE); /* Turn off ENREQINIT for now. */ outb(SIMODE1, ENSCSIRST|ENSCSIPERR|ENBUSFREE|ENPHASECHG); /* I have tried to make the main loop as tight as possible. This * means that some of the code following the loop is a bit more * complex than otherwise. */ while (n > 0) { int xfer; for (;;) { dmastat = inb(DMASTAT); if ((dmastat & DFIFOEMP) != 0) break; if ((dmastat & INTSTAT) != 0) goto phasechange; } xfer = min(DOUTAMOUNT, n); AIC_MISC(("%d> ", xfer)); n -= xfer; out += xfer; #if AIC_USE_DWORDS if (xfer >= 12) { outsl(DMADATALONG, p, xfer>>2); p += xfer & ~3; xfer &= 3; } #else if (xfer >= 8) { outsw(DMADATA, p, xfer>>1); p += xfer & ~1; xfer &= 1; } #endif if (xfer > 0) { outb(DMACNTRL0, ENDMA|B8MODE|WRITE); outsb(DMADATA, p, xfer); p += xfer; outb(DMACNTRL0, ENDMA|DWORDPIO|WRITE); } } if (out == 0) { outb(SXFRCTL1, BITBUCKET); for (;;) { if ((inb(DMASTAT) & INTSTAT) != 0) break; } outb(SXFRCTL1, 0); AIC_MISC(("extra data ")); } else { /* See the bytes off chip */ for (;;) { dmastat = inb(DMASTAT); if ((dmastat & DFIFOEMP) != 0 && (inb(SSTAT2) & SEMPTY) != 0) break; if ((dmastat & INTSTAT) != 0) goto phasechange; } } phasechange: /* Stop the FIFO data path. */ outb(SXFRCTL0, CHEN); while ((inb(SXFRCTL0) & SCSIEN) != 0) ; if ((dmastat & INTSTAT) != 0) { /* Some sort of phase change. */ int amount; /* Stop transfers, do some accounting */ amount = inb(FIFOSTAT) + (inb(SSTAT2) & 15); if (amount > 0) { out -= amount; outb(SXFRCTL0, CHEN|CLRSTCNT|CLRCH); AIC_MISC(("+%d ", amount)); } } /* Turn on ENREQINIT again. */ outb(SIMODE1, ENSCSIRST|ENSCSIPERR|ENBUSFREE|ENREQINIT|ENPHASECHG); return out; } /* aic_datain_pio: perform data transfers using the FIFO datapath in the aic6360 * Precondition: The SCSI bus should be in the DIN phase, with REQ asserted * and ACK deasserted (i.e. at least one byte is ready). * For now, uses a pretty dumb algorithm, hangs around until all data has been * transferred. This, is OK for fast targets, but not so smart for slow * targets which don't disconnect or for huge transfers. */ int aic_datain_pio(sc, p, n) register struct aic_softc *sc; u_char *p; int n; { register u_char dmastat; int in = 0; #define DINAMOUNT 128 /* Full FIFO */ /* Clear host FIFO and counter. */ outb(DMACNTRL0, RSTFIFO); /* Enable FIFOs */ outb(SXFRCTL0, SCSIEN|DMAEN|CHEN); outb(DMACNTRL0, ENDMA|DWORDPIO); /* Turn off ENREQINIT for now. */ outb(SIMODE1, ENSCSIRST|ENSCSIPERR|ENBUSFREE|ENPHASECHG); /* We leave this loop if one or more of the following is true: * a) phase != PH_DATAIN && FIFOs are empty * b) SCSIRSTI is set (a reset has occurred) or busfree is detected. */ while (n > 0) { int xfer; /* Wait for fifo half full or phase mismatch */ for (;;) { dmastat = inb(DMASTAT); if ((dmastat & (DFIFOFULL|INTSTAT)) != 0) break; } if ((dmastat & DFIFOFULL) != 0) xfer = min(DINAMOUNT, n); else xfer = min(inb(FIFOSTAT), n); AIC_MISC((">%d ", xfer)); n -= xfer; in += xfer; #if AIC_USE_DWORDS if (xfer >= 12) { insl(DMADATALONG, p, xfer>>2); p += xfer & ~3; xfer &= 3; } #else if (xfer >= 8) { insw(DMADATA, p, xfer>>1); p += xfer & ~1; xfer &= 1; } #endif if (xfer > 0) { outb(DMACNTRL0, ENDMA|B8MODE); insb(DMADATA, p, xfer); p += xfer; outb(DMACNTRL0, ENDMA|DWORDPIO); } if ((dmastat & INTSTAT) != 0) goto phasechange; } /* Some SCSI-devices are rude enough to transfer more data than what * was requested, e.g. 2048 bytes from a CD-ROM instead of the * requested 512. Test for progress, i.e. real transfers. If no real * transfers have been performed (n is probably already zero) and the * FIFO is not empty, waste some bytes.... */ if (in == 0) { outb(SXFRCTL1, BITBUCKET); for (;;) { if ((inb(DMASTAT) & INTSTAT) != 0) break; } outb(SXFRCTL1, 0); AIC_MISC(("extra data ")); } phasechange: /* Stop the FIFO data path. */ outb(SXFRCTL0, CHEN); while ((inb(SXFRCTL0) & SCSIEN) != 0) ; /* Turn on ENREQINIT again. */ outb(SIMODE1, ENSCSIRST|ENSCSIPERR|ENBUSFREE|ENREQINIT|ENPHASECHG); return in; } /* * This is the workhorse routine of the driver. * Deficiencies (for now): * 1) always uses programmed I/O */ int aicintr(arg) void *arg; { register struct aic_softc *sc = arg; u_char sstat0, sstat1; register struct aic_acb *acb; register struct scsi_link *sc_link; struct aic_tinfo *ti; int n; /* * Clear INTEN. We enable it again before returning. This makes the * interrupt esssentially level-triggered. */ outb(DMACNTRL0, 0); AIC_TRACE(("aicintr ")); loop: gotintr: /* * First check for abnormal conditions, such as reset. */ sstat1 = inb(SSTAT1); AIC_MISC(("sstat1:0x%02x ", sstat1)); if ((sstat1 & SCSIRSTI) != 0) { printf("%s: SCSI bus reset\n", sc->sc_dev.dv_xname); goto reset; } /* * Check for less serious errors. */ if ((sstat1 & SCSIPERR) != 0) { printf("%s: SCSI bus parity error\n", sc->sc_dev.dv_xname); outb(CLRSINT1, CLRSCSIPERR); if (sc->sc_prevphase == PH_MSGIN) { aic_sched_msgout(SEND_PARITY_ERROR); sc->sc_flags |= AIC_DROP_MSGIN; } else aic_sched_msgout(SEND_INIT_DET_ERR); } /* * If we're not already busy doing something test for the following * conditions: * 1) We have been reselected by something * 2) We have selected something successfully * 3) Our selection process has timed out * 4) This is really a bus free interrupt just to get a new command * going? * 5) Spurious interrupt? */ switch (sc->sc_state) { case AIC_IDLE: case AIC_SELECTING: sstat0 = inb(SSTAT0); AIC_MISC(("sstat0:0x%02x ", sstat0)); if ((sstat0 & TARGET) != 0) { /* * We don't currently support target mode. */ printf("%s: target mode selected; going to bus free\n", sc->sc_dev.dv_xname); outb(SCSISIG, 0); sc->sc_state = AIC_IDLE; aic_sched(sc); goto out; } else if ((sstat0 & SELDI) != 0) { AIC_MISC(("reselected ")); /* * If we're trying to select a target ourselves, * push our command back into the ready list. */ if (sc->sc_state == AIC_SELECTING) { AIC_MISC(("backoff selector ")); AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; sc->sc_nexus = NULL; TAILQ_INSERT_HEAD(&sc->ready_list, acb, chain); } /* Save reselection ID. */ sc->sc_selid = inb(SELID); sc->sc_state = AIC_RESELECTED; } else if ((sstat0 & SELDO) != 0) { AIC_MISC(("selected ")); /* We have selected a target. Things to do: * a) Determine what message(s) to send. * b) Verify that we're still selecting the target. * c) Mark device as busy. */ if (sc->sc_state != AIC_SELECTING) { printf("%s: selection out while idle; resetting\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto reset; } AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; sc_link = acb->xs->sc_link; ti = &sc->sc_tinfo[sc_link->target]; if ((acb->xs->flags & SCSI_RESET) == 0) { sc->sc_msgpriq = SEND_IDENTIFY; if (acb->flags != ACB_ABORTED) { #if AIC_USE_SYNCHRONOUS if ((ti->flags & DO_SYNC) != 0) sc->sc_msgpriq |= SEND_SDTR; #endif #if AIC_USE_WIDE if ((ti->flags & DO_WIDE) != 0) sc->sc_msgpriq |= SEND_WDTR; #endif } else { sc->sc_flags |= AIC_ABORTING; sc->sc_msgpriq |= SEND_ABORT; } } else sc->sc_msgpriq = SEND_DEV_RESET; ti->lubusy |= (1 << sc_link->lun); /* Do an implicit RESTORE POINTERS. */ sc->sc_dp = acb->data_addr; sc->sc_dleft = acb->data_length; sc->sc_cp = (u_char *)&acb->scsi_cmd; sc->sc_cleft = acb->scsi_cmd_length; sc->sc_state = AIC_CONNECTED; } else if ((sstat1 & SELTO) != 0) { AIC_MISC(("selection timeout ")); if (sc->sc_state != AIC_SELECTING) { printf("%s: selection timeout while idle; resetting\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto reset; } AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; outb(SXFRCTL1, 0); outb(SCSISEQ, ENRESELI); outb(CLRSINT1, CLRSELTIMO); acb->xs->error = XS_SELTIMEOUT; untimeout(aic_timeout, acb); delay(250); aic_done(sc, acb); goto out; } else { #ifdef AIC_PICKY if (sc->sc_state != AIC_IDLE) { printf("%s: BUS FREE while not idle; state=%d\n", sc->sc_dev.dv_xname, sc->sc_state); AIC_BREAK(); goto out; } #endif aic_sched(sc); goto out; } /* * Turn off selection stuff, and prepare to catch bus free * interrupts, parity errors, and phase changes. */ outb(SXFRCTL1, 0); outb(SCSISEQ, ENAUTOATNP); outb(CLRSINT0, CLRSELDI|CLRSELDO); outb(CLRSINT1, CLRBUSFREE|CLRPHASECHG); outb(SIMODE0, 0); outb(SIMODE1, ENSCSIRST|ENSCSIPERR|ENBUSFREE|ENREQINIT|ENPHASECHG); sc->sc_flags = 0; sc->sc_prevphase = PH_INVALID; goto dophase; } outb(CLRSINT1, CLRPHASECHG); if ((sstat1 & BUSFREE) != 0) { /* We've gone to BUS FREE phase. */ outb(CLRSINT1, CLRBUSFREE); switch (sc->sc_state) { case AIC_RESELECTED: sc->sc_state = AIC_IDLE; aic_sched(sc); break; case AIC_CONNECTED: if ((sc->sc_flags & AIC_ABORTING) == 0) { printf("%s: unexpected BUS FREE; aborting\n", sc->sc_dev.dv_xname); AIC_BREAK(); } AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; acb->xs->error = XS_DRIVER_STUFFUP; goto finish; case AIC_DISCONNECT: AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; sc->sc_state = AIC_IDLE; sc->sc_nexus = NULL; TAILQ_INSERT_HEAD(&sc->nexus_list, acb, chain); aic_sched(sc); break; case AIC_CMDCOMPLETE: AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; finish: untimeout(aic_timeout, acb); aic_done(sc, acb); break; } goto out; } dophase: if ((sstat1 & REQINIT) == 0) { /* Wait for REQINIT. */ goto out; } sc->sc_phase = inb(SCSISIG) & PH_MASK; outb(SCSISIG, sc->sc_phase); switch (sc->sc_phase) { case PH_MSGOUT: /* If aborting, always handle MESSAGE OUT. */ if ((sc->sc_state & AIC_CONNECTED) == 0 && (sc->sc_flags & AIC_ABORTING) == 0) break; aic_msgout(sc); sc->sc_prevphase = PH_MSGOUT; goto loop; case PH_MSGIN: if ((sc->sc_state & (AIC_CONNECTED|AIC_RESELECTED)) == 0) break; if (aic_msgin(sc)) { sc->sc_prevphase = PH_MSGIN; goto gotintr; } sc->sc_prevphase = PH_MSGIN; goto loop; case PH_CMD: if ((sc->sc_state & AIC_CONNECTED) == 0) break; #if AIC_DEBUG if ((aic_debug & AIC_SHOWMISC) != 0) { AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; printf("cmd=0x%02x+%d ", acb->scsi_cmd.opcode, acb->scsi_cmd_length-1); } #endif n = aic_dataout_pio(sc, sc->sc_cp, sc->sc_cleft); sc->sc_cp += n; sc->sc_cleft -= n; sc->sc_prevphase = PH_CMD; goto loop; case PH_DATAOUT: if ((sc->sc_state & AIC_CONNECTED) == 0) break; AIC_MISC(("dataout dleft=%d ", sc->sc_dleft)); n = aic_dataout_pio(sc, sc->sc_dp, sc->sc_dleft); sc->sc_dp += n; sc->sc_dleft -= n; sc->sc_prevphase = PH_DATAOUT; goto loop; case PH_DATAIN: if ((sc->sc_state & AIC_CONNECTED) == 0) break; AIC_MISC(("datain ")); n = aic_datain_pio(sc, sc->sc_dp, sc->sc_dleft); sc->sc_dp += n; sc->sc_dleft -= n; sc->sc_prevphase = PH_DATAIN; goto loop; case PH_STAT: if ((sc->sc_state & AIC_CONNECTED) == 0) break; AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; /* XXXX Don't clear FIFO. Wait for byte to come in. */ outb(SXFRCTL0, CHEN|SPIOEN); outb(DMACNTRL0, RSTFIFO); acb->target_stat = inb(SCSIDAT); outb(SXFRCTL0, CHEN); outb(DMACNTRL0, RSTFIFO); while ((inb(SXFRCTL0) & SCSIEN) != 0) ; AIC_MISC(("target_stat=0x%02x ", acb->target_stat)); sc->sc_prevphase = PH_STAT; goto loop; } printf("%s: unexpected bus phase; resetting\n", sc->sc_dev.dv_xname); AIC_BREAK(); reset: aic_init(sc); return 1; out: outb(DMACNTRL0, INTEN); return 1; } void aic_abort(sc, acb) struct aic_softc *sc; struct aic_acb *acb; { if (sc->sc_nexus == acb) { if (sc->sc_state == AIC_CONNECTED) { sc->sc_flags |= AIC_ABORTING; aic_sched_msgout(SEND_ABORT); } } else { aic_dequeue(sc, acb); TAILQ_INSERT_HEAD(&sc->ready_list, acb, chain); if (sc->sc_state == AIC_IDLE) aic_sched(sc); } } void aic_timeout(arg) void *arg; { struct aic_acb *acb = arg; struct scsi_xfer *xs = acb->xs; struct scsi_link *sc_link = xs->sc_link; struct aic_softc *sc = sc_link->adapter_softc; int s; sc_print_addr(sc_link); printf("timed out"); s = splbio(); if (acb->flags == ACB_ABORTED) { /* abort timed out */ printf(" AGAIN\n"); acb->xs->retries = 0; aic_done(sc, acb); } else { /* abort the operation that has timed out */ printf("\n"); acb->xs->error = XS_TIMEOUT; acb->flags = ACB_ABORTED; aic_abort(sc, acb); /* 2 secs for the abort */ if ((xs->flags & SCSI_POLL) == 0) timeout(aic_timeout, acb, 2 * hz); } splx(s); } #ifdef AIC_DEBUG /* * The following functions are mostly used for debugging purposes, either * directly called from the driver or from the kernel debugger. */ void aic_show_scsi_cmd(acb) struct aic_acb *acb; { u_char *b = (u_char *)&acb->scsi_cmd; struct scsi_link *sc_link = acb->xs->sc_link; int i; sc_print_addr(sc_link); if ((acb->xs->flags & SCSI_RESET) == 0) { for (i = 0; i < acb->scsi_cmd_length; i++) { if (i) printf(","); printf("%x", b[i]); } printf("\n"); } else printf("RESET\n"); } void aic_print_acb(acb) struct aic_acb *acb; { printf("acb@%x xs=%x flags=%x", acb, acb->xs, acb->flags); printf(" dp=%x dleft=%d target_stat=%x\n", (long)acb->data_addr, acb->data_length, acb->target_stat); aic_show_scsi_cmd(acb); } void aic_print_active_acb() { struct aic_acb *acb; struct aic_softc *sc = aiccd.cd_devs[0]; printf("ready list:\n"); for (acb = sc->ready_list.tqh_first; acb != NULL; acb = acb->chain.tqe_next) aic_print_acb(acb); printf("nexus:\n"); if (sc->sc_nexus != NULL) aic_print_acb(sc->sc_nexus); printf("nexus list:\n"); for (acb = sc->nexus_list.tqh_first; acb != NULL; acb = acb->chain.tqe_next) aic_print_acb(acb); } void aic_dump6360(sc) struct aic_softc *sc; { printf("aic6360: SCSISEQ=%x SXFRCTL0=%x SXFRCTL1=%x SCSISIG=%x\n", inb(SCSISEQ), inb(SXFRCTL0), inb(SXFRCTL1), inb(SCSISIG)); printf(" SSTAT0=%x SSTAT1=%x SSTAT2=%x SSTAT3=%x SSTAT4=%x\n", inb(SSTAT0), inb(SSTAT1), inb(SSTAT2), inb(SSTAT3), inb(SSTAT4)); printf(" SIMODE0=%x SIMODE1=%x DMACNTRL0=%x DMACNTRL1=%x DMASTAT=%x\n", inb(SIMODE0), inb(SIMODE1), inb(DMACNTRL0), inb(DMACNTRL1), inb(DMASTAT)); printf(" FIFOSTAT=%d SCSIBUS=0x%x\n", inb(FIFOSTAT), inb(SCSIBUS)); } void aic_dump_driver(sc) struct aic_softc *sc; { struct aic_tinfo *ti; int i; printf("nexus=%x prevphase=%x\n", sc->sc_nexus, sc->sc_prevphase); printf("state=%x msgin=%x msgpriq=%x msgoutq=%x lastmsg=%x currmsg=%x\n", sc->sc_state, sc->sc_imess[0], sc->sc_msgpriq, sc->sc_msgoutq, sc->sc_lastmsg, sc->sc_currmsg); for (i = 0; i < 7; i++) { ti = &sc->sc_tinfo[i]; printf("tinfo%d: %d cmds %d disconnects %d timeouts", i, ti->cmds, ti->dconns, ti->touts); printf(" %d senses flags=%x\n", ti->senses, ti->flags); } } #endif