# $NetBSD: IOPENER,v 1.10 2000/08/21 07:39:44 itohy Exp $ # # IOPENER -- GENERIC-like kernel for the Netpliance i-opener # from: GENERIC,v 1.358 2000/07/05 04:07:25 sommerfeld Exp # include "arch/i386/conf/std.i386" #ident "IOPENER-$Revision: 1.10 $" maxusers 32 # estimated number of users options I586_CPU # CPU-related options. #options VM86 # virtual 8086 emulation #options USER_LDT # user-settable LDT; used by WINE # eliminate delay no-ops in I/O; recommended on all but very old machines options DUMMY_NOPS # delay between "rebooting ..." message and hardware reset, in milliseconds #options CPURESET_DELAY=2000 # This option allows you to force a serial console at the specified # I/O address. see console(4) for details. #options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600 # you don't want the option below ON iff you are using the # serial console option of the new boot strap code. #options CONS_OVERRIDE # Always use above! independent of boot info # Standard system options options UCONSOLE # users can use TIOCCONS (for xconsole) options INSECURE # disable kernel security levels options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT options NTP # NTP phase/frequency locked loop options KTRACE # system call tracing via ktrace(1) options SYSVMSG # System V-like message queues options SYSVSEM # System V-like semaphores options SYSVSHM # System V-like memory sharing #options SHMMAXPGS=1024 # 1024 pages is the default #options LKM # loadable kernel modules # Diagnostic/debugging support options options DIAGNOSTIC # cheap kernel consistency checks #options DEBUG # expensive debugging checks/support #options KMEMSTATS # kernel memory statistics (vmstat -m) options DDB # in-kernel debugger options DDB_HISTORY_SIZE=512 # enable history editing in DDB #options KGDB # remote debugger #options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600 #makeoptions DEBUG="-g" # compile full symbol table # Compatibility options options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, options COMPAT_09 # NetBSD 0.9, options COMPAT_10 # NetBSD 1.0, options COMPAT_11 # NetBSD 1.1, options COMPAT_12 # NetBSD 1.2, options COMPAT_13 # NetBSD 1.3, options COMPAT_14 # NetBSD 1.4, options COMPAT_43 # and 4.3BSD #options COMPAT_386BSD_MBRPART # recognize old partition ID #options COMPAT_SVR4 # binary compatibility with SVR4 #options COMPAT_IBCS2 # binary compatibility with SCO and ISC options COMPAT_LINUX # binary compatibility with Linux #options COMPAT_FREEBSD # binary compatibility with FreeBSD # File systems file-system FFS # UFS #file-system EXT2FS # second extended file system (linux) #file-system LFS # log-structured file system file-system MFS # memory file system file-system NFS # Network File System client #file-system NTFS # Windows/NT file system (experimental) #file-system CD9660 # ISO 9660 + Rock Ridge file system #file-system MSDOSFS # MS-DOS file system #file-system FDESC # /dev/fd file-system KERNFS # /kern #file-system NULLFS # loopback file system #file-system OVERLAY # overlay file system #file-system PORTAL # portal filesystem (still experimental) #file-system PROCFS # /proc #file-system UMAPFS # NULLFS + uid and gid remapping #file-system UNION # union file system #file-system CODA # Coda File System; also needs vcoda (below) # File system options #options QUOTA # UFS quotas #options FFS_EI # FFS Endian Independent support options SOFTDEP # FFS soft updates support. #options NFSSERVER # Network File System server #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and # immutable) behave as system flags. # Networking options #options GATEWAY # packet forwarding options INET # IP + ICMP + TCP + UDP options INET6 # IPV6 #options IPSEC # IP security #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) #options IPSEC_DEBUG # debug for IP security #options MROUTING # IP multicast routing #options NS # XNS #options NSIP # XNS tunneling over IP #options ISO,TPIP # OSI #options EON # OSI tunneling over IP #options CCITT,LLC,HDLC # X.25 #options NETATALK # AppleTalk networking protocols #options PPP_BSDCOMP # BSD-Compress compression support for PPP #options PPP_DEFLATE # Deflate compression support for PPP #options PPP_FILTER # Active filter support for PPP (requires bpf) #options PFIL_HOOKS # pfil(9) packet filter hooks #options IPFILTER_LOG # ipmon(8) log support # Compatibility with 4.2BSD implementation of TCP/IP. Not recommended. #options TCP_COMPAT_42 # These options enable verbose messages for several subsystems. # Warning, these may compile large string tables into the kernel! options MIIVERBOSE # verbose PHY autoconfig messages options PCIVERBOSE # verbose PCI device autoconfig messages #options PCI_CONFIG_DUMP # verbosely dump PCI config space #options SCSIVERBOSE # human readable SCSI error messages options USBVERBOSE # verbose USB device autoconfig messages #options PNPBIOSVERBOSE # verbose PnP BIOS messages #options PNPBIOSDEBUG # more fulsome Pnp BIOS debugging messages options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM # # wscons options # # builtin terminal emulations #options WSEMUL_SUN # sun terminal emulation options WSEMUL_VT100 # VT100 / VT220 emulation # different kernel output - see dev/wscons/wsdisplayvar.h options WS_KERNEL_FG=WSCOL_GREEN #options WS_KERNEL_BG=WSCOL_BLACK # compatibility to other console drivers options WSDISPLAY_COMPAT_PCVT # emulate some ioctls options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls options WSDISPLAY_COMPAT_USL # VT handling options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes # see dev/pckbc/wskbdmap_mfii.c for implemented layouts #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" # Make F1 ("Back") -> Escape, F2-F12 ("Forward" to "Home") -> F1-F11 options PCKBD_LAYOUT="(KB_US | KB_IOPENER)" # allocate a number of virtual screens at autoconfiguration time #options WSDISPLAY_DEFAULTSCREENS=4 # use a large software cursor that doesn't blink #options PCDISPLAY_SOFTCURSOR # Kernel root file system and dump configuration. config netbsd root on ? type ? #config netbsd root on wd0a type ffs #config netbsd root on ? type nfs # # Device configuration # mainbus0 at root apm0 at mainbus0 # Advanced power management # Tuning for power management, see apm(4) for more details. #options APM_NO_IDLE # Don't call BIOS CPU idle function #options APM_V10_ONLY # Use only the APM 1.0 calls #options APM_NO_POWEROFF # Don't power off on halt(8) #options APM_POWER_PRINT # Print stats on the console #options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts # Basic Bus Support # PCI bus support pci* at mainbus? bus ? pci* at pchb? bus ? pci* at ppb? bus ? # Configure PCI using BIOS information #options PCIBIOS # PCI BIOS support #options PCIBIOSVERBOSE # PCI BIOS verbose info #options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses #options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering #options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing #options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11 #options PCIBIOS_INTR_GUESS # see pcibios(4) #options PCIINTR_DEBUG # super-verbose PCI interrupt fixup # PCI bridges pchb* at pci? dev ? function ? # PCI-Host bridges pcib* at pci? dev ? function ? # PCI-ISA bridges ppb* at pci? dev ? function ? # PCI-PCI bridges # ISA bus support isa* at pcib? # ISA Plug-and-Play bus support isapnp0 at isa? # Coprocessor Support # Math Coprocessor support npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor # Console Devices # Keyboard layout configuration for pccons #options FRENCH_KBD #options FINNISH_KBD #options GERMAN_KBD #options NORWEGIAN_KBD # wscons pckbc0 at isa? # pc keyboard controller pckbd* at pckbc? # PC keyboard # "opms" should not be enabled together with "pms" or "pmsi" pms* at pckbc? # PS/2 mouse for wsmouse #pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse #opms* at pckbc? # backwards compatible PS/2 mouse vga* at pci? dev ? function ? wsdisplay* at vga? console ? wskbd* at pckbd? console ? wsmouse* at pms? mux 0 #wsmouse* at pmsi? mux 0 pcppi0 at isa? sysbeep0 at pcppi? # Serial Devices # ISA serial interfaces com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports com1 at isa? port 0x2f8 irq 3 # Parallel Printer Interfaces # ISA parallel printer interfaces lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports # IDE and related devices # PCI IDE controllers - see pciide(4) for supported hardware. # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know # how to set up DMA modes for this chip. This may work, or may cause # a machine hang with some controllers. pciide* at pci? dev ? function ? flags 0x0000 # IDE drives # Flags are used only with controllers that support DMA operations # and mode settings (e.g. some pciide controllers) # The lowest order four bits (rightmost digit) of the flags define the PIO # mode to use, the next set of four bits the DMA mode and the third set the # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode # to use, and the last bit must be 1 for this setting to be used. # For DMA and UDMA, 0xf (1111) means 'disable'. # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. # (0xc=1100, 0xa=1010, 0xf=1111) # 0x0000 means "use whatever the drive claims to support". wd* at pciide? channel ? drive ? flags 0x0000 # Network Interfaces # MII/PHY support exphy* at mii? phy ? # 3Com internal PHYs icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890 inphy* at mii? phy ? # Intel 82555 PHYs iophy* at mii? phy ? # Intel 82553 PHYs lxtphy* at mii? phy ? # Level One LXT-970 PHYs nsphy* at mii? phy ? # NS83840 PHYs nsphyter* at mii? phy ? # NS83843 PHYs qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs tlphy* at mii? phy ? # ThunderLAN PHYs tqphy* at mii? phy ? # TDK Semiconductor PHYs ukphy* at mii? phy ? # generic unknown PHYs # USB Controller and Devices # PCI USB controllers uhci* at pci? dev ? function ? # Universal Host Controller (Intel) # USB bus support usb* at uhci? # USB Hubs uhub* at usb? uhub* at uhub? port ? configuration ? interface ? # USB Mice ums* at uhub? port ? configuration ? interface ? wsmouse* at ums? mux 0 # USB Keyboards ukbd* at uhub? port ? configuration ? interface ? wskbd* at ukbd? console ? mux 1 # USB Generic HID devices uhid* at uhub? port ? configuration ? interface ? # USB Printer ulpt* at uhub? port ? configuration ? interface ? # USB Modem umodem* at uhub? port ? configuration ? ucom* at umodem? # USB Mass Storage umass* at uhub? port ? configuration ? interface ? scsibus* at umass? channel ? # USB audio uaudio* at uhub? port ? configuration ? # USB Ethernet adapters aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters cue* at uhub? port ? # CATC USB-EL1201A based adapters kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters # USB Handspring Visor #uvisor* at uhub? port ? #ucom* at uvisor? # USB Generic driver ugen* at uhub? port ? # Audio Devices # ISA Plug-and-Play audio devices ym* at isapnp? # Yamaha OPL3-SA3 audio # OPL[23] FM synthesizers opl* at ym? # Audio support audio* at ym? # MPU 401 UARTs mpu* at ym? # MIDI support midi* at mpu? # MPU 401 midi* at opl? # OPL FM synth # The spkr driver provides a simple tone interface to the built in speaker. #spkr0 at pcppi? # PC speaker # Pull in optional local configuration include "arch/i386/conf/GENERIC.local" # Pseudo-Devices # disk/mass storage pseudo-devices #pseudo-device ccd 4 # concatenated/striped disk devices #pseudo-device raid 4 # RAIDframe disk driver #options RAID_AUTOCONFIG # auto-configuration of RAID components #pseudo-device md 1 # memory disk device (ramdisk) #pseudo-device vnd 4 # disk-like interface to files # network pseudo-devices pseudo-device bpfilter 8 # Berkeley packet filter pseudo-device ipfilter # IP filter (firewall) and NAT pseudo-device loop # network loopback pseudo-device ppp 2 # Point-to-Point Protocol pseudo-device sl 2 # Serial Line IP #pseudo-device strip 2 # Starmode Radio IP (Metricom) #pseudo-device tun 2 # network tunneling over tty #pseudo-device gre 2 # generic L3 over IP tunnel #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) #pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) #pseudo-device faith 1 # IPv[46] tcp relay translation i/f #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation # miscellaneous pseudo-devices pseudo-device pty 64 # pseudo-terminals #pseudo-device tb 1 # tablet line discipline pseudo-device sequencer 1 # MIDI sequencer # rnd works; RND_COM does not on port i386 yet. pseudo-device rnd # /dev/random and in-kernel generator #options RND_COM # use "com" randomness as well (BROKEN) # a pseudo device needed for Coda # also needs CODA (above) #pseudo-device vcoda 4 # coda minicache <-> venus comm. # mouse & keyboard multiplexor pseudo-devices pseudo-device wsmux 2