/* $NetBSD: if_ebreg.h,v 1.2 1996/03/18 21:23:12 mark Exp $ */ /* * Copyright (c) 1995 Mark Brinicombe * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Mark Brinicombe. * 4. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * RiscBSD kernel project * * if_ebreg.h * * EtherB device driver * * Created : 08/07/95 */ /* * SEEQ 80C04 Register Definitions */ #define EB_8004_BASE 0x800 /* * SEEQ 80C04 registers */ #define EB_8004_COMMAND 0x000 #define EB_8004_STATUS 0x000 #define EB_8004_CONFIG1 0x040 #define EB_8004_CONFIG2 0x080 #define EB_8004_RX_END 0x0c0 #define EB_8004_BUFWIN 0x100 #define EB_8004_RX_PTR 0x140 #define EB_8004_TX_PTR 0x180 #define EB_8004_DMA_ADDR 0x1c0 /* */ #define EB_CMD_TEST_INTEN (1 << 0) #define EB_CMD_RX_INTEN (1 << 1) #define EB_CMD_TX_INTEN (1 << 2) #define EB_CMD_TEST_INTACK (1 << 4) #define EB_CMD_RX_INTACK (1 << 5) #define EB_CMD_TX_INTACK (1 << 6) #define EB_CMD_BW_INTACK (1 << 7) #define EB_CMD_TEST_INT1 (1 << 8) #define EB_CMD_RX_ON (1 << 9) #define EB_CMD_TX_ON (1 << 10) #define EB_CMD_TEST_INT2 (1 << 11) #define EB_CMD_RX_OFF (1 << 12) #define EB_CMD_TX_OFF (1 << 13) #define EB_CMD_FIFO_READ (1 << 14) #define EB_CMD_FIFO_WRITE (1 << 15) #define EB_STATUS_TEST_INT (1 << 4) #define EB_STATUS_RX_INT (1 << 5) #define EB_STATUS_TX_INT (1 << 6) #define EB_STATUS_RX_ON (1 << 9) #define EB_STATUS_TX_ON (1 << 10) #define EB_STATUS_TX_NOFAIL (1 << 12) #define EB_STATUS_FIFO_FULL (1 << 13) #define EB_STATUS_FIFO_EMPTY (1 << 14) #define EB_STATUS_FIFO_DIR (1 << 15) #define EB_STATUS_FIFO_READ (1 << 15) #define EB_CFG1_SPECIFIC ((0 << 15) | (0 << 14)) #define EB_CFG1_BROADCAST ((0 << 15) | (1 << 14)) #define EB_CFG1_MULTICAST ((1 << 15) | (0 << 14)) #define EB_CFG1_PROMISCUOUS ((1 << 15) | (1 << 14)) #define EB_CFG2_BYTESWAP (1 << 0) #define EB_CFG2_REA_AUTOUPDATE (1 << 1) #define EB_CFG2_RX_TX_DISABLE (1 << 2) #define EB_CFG2_CRC_ERR_ENABLE (1 << 3) #define EB_CFG2_DRIB_ERR_ENABLE (1 << 4) #define EB_CFG2_PASS_LONGSHORT (1 << 5) #define EB_CFG2_PREAM_SELECT (1 << 7) #define EB_CFG2_RX_CRC (1 << 9) #define EB_CFG2_NO_TX_CRC (1 << 10) #define EB_CFG2_LOOPBACK (1 << 11) #define EB_CFG2_OUTPUT (1 << 12) #define EB_CFG2_RESET (1 << 15) #define EB_CFG3_SLEEP (1 << 3) #define EB_BUFCODE_STATION_ADDR 0x00 #define EB_BUFCODE_ADDRESS_PROM 0x06 #define EB_BUFCODE_TX_EAP 0x07 #define EB_BUFCODE_LOCAL_MEM 0x08 #define EB_BUFCODE_TX_COLLS 0x0b #define EB_BUFCODE_CONFIG3 0x0c #define EB_BUFCODE_PRODUCTID 0x0d #define EB_BUFCODE_TESTENABLE 0x0e #define EB_BUFCODE_MULTICAST 0x0f #define EB_PKTHDR_TX (1 << 7) #define EB_PKTHDR_RX (0 << 7) #define EB_PKTHDR_CHAIN_CONT (1 << 6) #define EB_PKTHDR_DATA_FOLLOWS (1 << 5) #define EB_PKTHDR_DONE (1 << 7) #define EB_TXHDR_BABBLE (1 << 0) #define EB_TXHDR_COLLISION (1 << 1) #define EB_TXHDR_COLLISION16 (1 << 2) #define EB_TXHDR_COLLISIONMASK (0x78) #define EB_TXHDR_ERROR_MASK (0x07) #define EB_TXHDR_BABBLE_INT (1 << 0) #define EB_TXHDR_COLLISION_INT (1 << 1) #define EB_TXHDR_COLLISION16_INT (1 << 2) #define EB_TXHDR_XMIT_SUCCESS_INT (1 << 3) #define EB_TXHDR_SQET_TEST_INT (1 << 3) #define EB_RXHDR_OVERSIZE (1 << 0) #define EB_RXHDR_CRC_ERROR (1 << 1) #define EB_RXHDR_DRIBBLE_ERROR (1 << 2) #define EB_RXHDR_SHORT_FRAME (1 << 3) #define EB_BUFFER_SIZE 0x10000 #define EB_TX_BUFFER_SIZE 0x4000 #define EB_RX_BUFFER_SIZE 0xC000 /* Packet buffer size */ #define EB_BUFSIZ 2048 /* End of if_ebreg.h */