/* $NetBSD: lubbock_lcd.c,v 1.5 2006/04/17 15:59:47 jmmv Exp $ */ /* * Copyright (c) 2002, 2003 Genetec Corporation. All rights reserved. * Written by Hiroyuki Bessho for Genetec Corporation. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Genetec Corporation may not be used to endorse or * promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * LCD driver for Intel Lubbock. * * Controlling LCD is almost completely done through PXA2X0's * integrated LCD controller. Codes for it is arm/xscale/pxa2x0_lcd.c. * * Codes in this file provide platform specific things including: * LCD on/off switch in on-board PLD register. * LCD panel geometry */ #include __KERNEL_RCSID(0, "$NetBSD: lubbock_lcd.c,v 1.5 2006/04/17 15:59:47 jmmv Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "wsdisplay.h" int lcd_match( struct device *, struct cfdata *, void *); void lcd_attach( struct device *, struct device *, void *); int lcdintr(void *); #if NWSDISPLAY > 0 /* * wsdisplay glue */ struct pxa2x0_wsscreen_descr lcd_bpp16_screen = { { "bpp16", 0, 0, &pxa2x0_lcd_emulops, 0, 0, WSSCREEN_WSCOLORS, }, 16 /* bits per pixel */ }, lcd_bpp8_screen = { { "bpp8", 0, 0, &pxa2x0_lcd_emulops, 0, 0, WSSCREEN_WSCOLORS, }, 8 /* bits per pixel */ }, lcd_bpp4_screen = { { "bpp4", 0, 0, &pxa2x0_lcd_emulops, 0, 0, WSSCREEN_WSCOLORS, }, 4 /* bits per pixel */ }; static const struct wsscreen_descr *lcd_scr_descr[] = { #if 0 /* bpp4 needs a patch to rasops4 */ &lcd_bpp4_screen.c, #endif &lcd_bpp8_screen.c, &lcd_bpp16_screen.c, }; const struct wsscreen_list lcd_screen_list = { sizeof lcd_scr_descr / sizeof lcd_scr_descr[0], lcd_scr_descr }; int lcd_ioctl(void *, void *, u_long, caddr_t, int, struct lwp *); int lcd_show_screen(void *, void *, int, void (*)(void *, int, int), void *); const struct wsdisplay_accessops lcd_accessops = { lcd_ioctl, pxa2x0_lcd_mmap, pxa2x0_lcd_alloc_screen, pxa2x0_lcd_free_screen, lcd_show_screen, NULL, /* load_font */ }; #else /* * Interface to LCD framebuffer without wscons */ dev_type_open(lcdopen); dev_type_close(lcdclose); dev_type_ioctl(lcdioctl); dev_type_mmap(lcdmmap); const struct cdevsw lcd_cdevsw = { lcdopen, lcdclose, noread, nowrite, lcdioctl, nostop, notty, nopoll, lcdmmap, D_TTY }; #endif CFATTACH_DECL(lcd_obio, sizeof (struct pxa2x0_lcd_softc), lcd_match, lcd_attach, NULL, NULL); int lcd_match( struct device *parent, struct cfdata *cf, void *aux ) { return 1; } static const struct lcd_panel_geometry sharp_LM8V31 = { 640, /* Width */ 480, /* Height */ 0, /* No extra lines */ LCDPANEL_DUAL|LCDPANEL_PASSIVE|LCDPANEL_PCP, 10, /* clock divider */ 0xff, /* AC bias pin freq */ 2, /* horizontal sync pulse width */ 3, /* BLW */ 3, /* ELW */ 1, /* vertical sync pulse width */ 0, /* BFW */ 0, /* EFW */ }; void lcd_attach( struct device *parent, struct device *self, void *aux ) { struct pxa2x0_lcd_softc *sc = (struct pxa2x0_lcd_softc *)self; pxa2x0_lcd_attach_sub(sc, aux, &sharp_LM8V31); #if NWSDISPLAY > 0 { struct wsemuldisplaydev_attach_args aa; /* make wsdisplay screen list */ pxa2x0_lcd_setup_wsscreen( &lcd_bpp16_screen, &sharp_LM8V31, NULL ); pxa2x0_lcd_setup_wsscreen( &lcd_bpp8_screen, &sharp_LM8V31, NULL ); pxa2x0_lcd_setup_wsscreen( &lcd_bpp4_screen, &sharp_LM8V31, NULL ); aa.console = 0; aa.scrdata = &lcd_screen_list; aa.accessops = &lcd_accessops; aa.accesscookie = sc; printf( "\n" ); (void) config_found(self, &aa, wsemuldisplaydevprint); } #else { struct pxa2x0_lcd_screen *screen = pxa2x0_lcd_new_screen( sc, 8 ); if( screen ){ sc->active = screen; pxa2x0_lcd_start_dma( sc, screen ); } printf( "\n" ); } #endif } #if NWSDISPLAY > 0 int lcd_ioctl(void *v, void *vs, u_long cmd, caddr_t data, int flag, struct lwp *l) { struct obio_softc *osc = (struct obio_softc *) device_parent((struct device *)v); uint16_t reg; switch (cmd) { case WSDISPLAYIO_SVIDEO: reg = bus_space_read_2( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR ); if( *(int *)data == WSDISPLAYIO_VIDEO_ON ) reg |= MISCWR_LCDDISP; else reg &= ~MISCWR_LCDDISP; bus_space_write_2( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR, reg ); break; /* turn on/off LCD controller */ } return pxa2x0_lcd_ioctl( v, vs, cmd, data, flag, l ); } int lcd_show_screen(void *v, void *cookie, int waitok, void (*cb)(void *, int, int), void *cbarg) { struct obio_softc *osc = (struct obio_softc *) device_parent((struct device *)v); pxa2x0_lcd_show_screen(v,cookie,waitok,cb,cbarg); /* Turn on LCD */ bus_space_write_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR, MISCWR_LCDDISP | bus_space_read_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR ) ); return (0); } #else /* NWSDISPLAY==0 */ int lcdopen( dev_t dev, int oflags, int devtype, struct lwp *l ) { return 0; } int lcdclose( dev_t dev, int fflag, int devtype, struct lwp *l ) { return 0; } paddr_t lcdmmap( dev_t dev, off_t offset, int size ) { struct pxa2x0_lcd_softc *sc = device_lookup(&lcd_cd, minor(dev)); struct pxa2x0_lcd_screen *scr = sc->active; return bus_dmamem_mmap( &pxa2x0_bus_dma_tag, scr->segs, scr->nsegs, offset, 0, BUS_DMA_WAITOK|BUS_DMA_COHERENT ); } int lcdioctl( dev_t dev, u_long cmd, caddr_t data, int fflag, struct lwp *l ) { return EOPNOTSUPP; } #endif /* NWSDISPLAY>0 */