/*-
 * Copyright (c) 1990 The Regents of the University of California.
 * All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * William Jolitz.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	from: @(#)isa.h	5.7 (Berkeley) 5/9/91
 *	$Id: isa.h,v 1.7 1993/06/06 04:16:44 cgd Exp $
 */

/*
 * ISA Bus conventions
 */

#ifndef LOCORE
#include <sys/cdefs.h>

unsigned char rtcin __P((int));
extern unsigned int atdevbase;	/* offset in virtual memory of ISA io mem */
void sysbeep __P((int, int));
unsigned kbd_8042cmd __P((int));
struct isa_device;
int isa_irq_pending __P((struct isa_device *dvp));
#endif


/*
 * Input / Output Port Assignments
 */

#ifndef IO_BEGIN
#define	IO_ISABEGIN	0x000		/* 0x000 - Beginning of I/O Registers */

		/* CPU Board */
#define IO_DMA1		0x000		/* 8237A DMA Controller #1 */
#define IO_ICU1		0x020		/* 8259A Interrupt Controller #1 */
#define IO_TIMER1	0x040		/* 8252 Timer #1 */
#define IO_TIMER2	0x048		/* 8252 Timer #2 */
#define IO_KBD		0x060		/* 8042 Keyboard */
#define IO_RTC		0x070		/* RTC */
#define IO_NMI		IO_RTC		/* NMI Control */
#define IO_DMAPG	0x080		/* DMA Page Registers */
#define IO_ICU2		0x0A0		/* 8259A Interrupt Controller #2 */
#define IO_DMA2		0x0C0		/* 8237A DMA Controller #2 */
#define IO_NPX		0x0F0		/* Numeric Coprocessor */

		/* Cards */
					/* 0x100 - 0x16F Open */

#define IO_WD2		0x170		/* Secondary Fixed Disk Controller */

					/* 0x178 - 0x1EF Open */

#define IO_WD1		0x1f0		/* Primary Fixed Disk Controller */
#define IO_GAME		0x200		/* Game Controller */

					/* 0x208 - 0x277 Open */

#define IO_LPT2		0x278		/* Parallel Port #2 */

					/* 0x280 - 0x2E7 Open */

#define	IO_COM4		0x2e8		/* COM4 i/o address */

					/* 0x2F0 - 0x2F7 Open */

#define IO_COM2		0x2f8		/* COM2 i/o address */

					/* 0x300 - 0x32F Open */

#define	IO_BT0		0x330		/* bustek 742a default addr. */
#define	IO_AHA0		0x330		/* adaptec 1542 default addr. */
#define	IO_UHA0		0x330		/* ultrastore 14f default addr. */
#define	IO_BT1          0x334		/* bustek 742a default addr. */
#define IO_AHA1         0x334		/* adaptec 1542 default addr. */

					/* 0x338 - 0x34F Open */

#define IO_WDS		0x350		/* WD7000 scsi */

					/* 0x354 - 0x36F Open */

#define IO_FD2		0x370		/* secondary base i/o address */
#define IO_LPT1		0x378		/* Parallel Port #1 */

					/* 0x380 - 0x3AF Open */

#define IO_MDA		0x3B0		/* Monochome Adapter */
#define IO_LPT3		0x3BC		/* Monochome Adapter Printer Port */
#define IO_VGA		0x3C0		/* E/VGA Ports */
#define IO_CGA		0x3D0		/* CGA Ports */

					/* 0x3E0 - 0x3E7 Open */

#define	IO_COM3		0x3e8		/* COM3 i/o address */
#define IO_FD1		0x3f0		/* primary base i/o address */
#define IO_COM1		0x3f8		/* COM1 i/o address */

#define	IO_ISAEND	0x3FF		/* - 0x3FF End of I/O Registers */
#endif	IO_ISABEGIN

/*
 * Input / Output Port Sizes - these are from several sources, and tend
 * to be the larger of what was found, ie COM ports can be 4, but some
 * boards do not fully decode the address, thus 8 ports are used.
 */

#ifndef	IO_ISASIZES
#define	IO_ISASIZES

#define	IO_COMSIZE	8	/* 8250, 16X50 com controllers (
#define	IO_CGASIZE	16	/* CGA controllers */
#define	IO_DMASIZE	16	/* 8237 DMA controllers */
#define	IO_DPGSIZE	32	/* 74LS612 DMA page reisters */
#define	IO_FDCSIZE	8	/* Nec765 floppy controllers */
#define	IO_WDCSIZE	8	/* WD compatible disk controller
#define	IO_GAMSIZE	16	/* AT compatible game controller
#define	IO_ICUSIZE	16	/* 8259A interrupt controllers *
#define	IO_KBDSIZE	16	/* 8042 Keyboard controllers */
#define	IO_LPTSIZE	8	/* LPT controllers, some use onl
#define	IO_MDASIZE	16	/* Monochrome display controller
#define	IO_RTCSIZE	16	/* CMOS real time clock, NMI con
#define	IO_TMRSIZE	16	/* 8253 programmable timers */
#define	IO_NPXSIZE	16	/* 80387/80487 NPX registers */
#define	IO_VGASIZE	16	/* VGA controllers */

#endif	/* IO_ISASIZES */

/*
 * Input / Output Memory Physical Addresses
 */

#ifndef	IOM_BEGIN
#define	IOM_BEGIN	0x0a0000		/* Start of I/O Memory "hole" */
#define	IOM_END		0x100000		/* End of I/O Memory "hole" */
#define	IOM_SIZE	(IOM_END - IOM_BEGIN)
#endif	IOM_BEGIN

/*
 * RAM Physical Address Space (ignoring the above mentioned "hole")
 */

#ifndef	RAM_BEGIN
#define	RAM_BEGIN	0x0000000	/* Start of RAM Memory */
#define	RAM_END		0x1000000	/* End of RAM Memory */
#define	RAM_SIZE	(RAM_END - RAM_BEGIN)
#endif	RAM_BEGIN

/*
 * Oddball Physical Memory Addresses
 */
#ifndef	COMPAQ_RAMRELOC
#define	COMPAQ_RAMRELOC	0x80c00000	/* Compaq RAM relocation/diag */
#define	COMPAQ_RAMSETUP	0x80c00002	/* Compaq RAM setup */
#define	WEITEK_FPU	0xC0000000	/* WTL 2167 */
#define	CYRIX_EMC	0xC0000000	/* Cyrix EMC */
#endif	COMPAQ_RAMRELOC

/* stuff that used to be in pccons.c */
#define MONO_BASE	0x3B4
#define MONO_BUF	0xfe0B0000
#define CGA_BASE	0x3D4
#define CGA_BUF		0xfe0B8000
#define IOPHYSMEM	0xA0000