/* $NetBSD: geodeide.c,v 1.11 2005/12/11 12:22:49 christos Exp $ */ /* * Copyright (c) 2004 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /* * Driver for the IDE part of the AMD Geode CS5530A companion chip * and AMD Geode SC1100. * Docs available from AMD's web site */ #include __KERNEL_RCSID(0, "$NetBSD: geodeide.c,v 1.11 2005/12/11 12:22:49 christos Exp $"); #include #include #include #include #include #include #include #include static void geodeide_chip_map(struct pciide_softc *, struct pci_attach_args *); static void geodeide_setup_channel(struct ata_channel *); static int geodeide_dma_init(void *, int, int, void *, size_t, int); static int geodeide_match(struct device *, struct cfdata *, void *); static void geodeide_attach(struct device *, struct device *, void *); CFATTACH_DECL(geodeide, sizeof(struct pciide_softc), geodeide_match, geodeide_attach, NULL, NULL); static const struct pciide_product_desc pciide_geode_products[] = { { PCI_PRODUCT_CYRIX_CX5530_IDE, 0, "AMD Geode CX5530 IDE controller", geodeide_chip_map, }, { PCI_PRODUCT_NS_SC1100_IDE, 0, "AMD Geode SC1100 IDE controller", geodeide_chip_map, }, { 0, 0, NULL, NULL, }, }; static int geodeide_match(struct device *parent, struct cfdata *match, void *aux) { struct pci_attach_args *pa = aux; if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CYRIX || PCI_VENDOR(pa->pa_id) == PCI_VENDOR_NS) && PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE && PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE && pciide_lookup_product(pa->pa_id, pciide_geode_products)) return(2); return (0); } static void geodeide_attach(struct device *parent, struct device *self, void *aux) { struct pci_attach_args *pa = aux; struct pciide_softc *sc = (void *)self; pciide_common_attach(sc, pa, pciide_lookup_product(pa->pa_id, pciide_geode_products)); } static void geodeide_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa) { struct pciide_channel *cp; int channel; bus_size_t cmdsize, ctlsize; if (pciide_chipen(sc, pa) == 0) return; aprint_normal("%s: bus-master DMA support present", sc->sc_wdcdev.sc_atac.atac_dev.dv_xname); pciide_mapreg_dma(sc, pa); aprint_normal("\n"); if (sc->sc_dma_ok) { sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DMA | ATAC_CAP_UDMA; sc->sc_wdcdev.irqack = pciide_irqack; /* * XXXJRT What chip revisions actually need the DMA * alignment work-around? */ sc->sc_wdcdev.dma_init = geodeide_dma_init; } sc->sc_wdcdev.sc_atac.atac_pio_cap = 4; sc->sc_wdcdev.sc_atac.atac_dma_cap = 2; sc->sc_wdcdev.sc_atac.atac_udma_cap = 2; /* * The 5530 is utterly swamped by UDMA mode 2, so limit to mode 1 * so that the chip is able to perform the other functions it has * while IDE UDMA is going on. */ if (sc->sc_pp->ide_product == PCI_PRODUCT_CYRIX_CX5530_IDE) { sc->sc_wdcdev.sc_atac.atac_udma_cap = 1; } sc->sc_wdcdev.sc_atac.atac_set_modes = geodeide_setup_channel; sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray; sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS; sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DATA16 | ATAC_CAP_DATA32; /* * Soekris Engineering Issue #0003: * "The SC1100 built in busmaster IDE controller is pretty * standard, but have two bugs: data transfers need to be * dword aligned and it cannot do an exact 64Kbyte data * transfer." */ if (sc->sc_pp->ide_product == PCI_PRODUCT_NS_SC1100_IDE) { if (sc->sc_dma_boundary == 0x10000) sc->sc_dma_boundary -= PAGE_SIZE; if (sc->sc_dma_maxsegsz == 0x10000) sc->sc_dma_maxsegsz -= PAGE_SIZE; } wdc_allocate_regs(&sc->sc_wdcdev); for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels; channel++) { cp = &sc->pciide_channels[channel]; /* controller is compat-only */ if (pciide_chansetup(sc, channel, 0) == 0) continue; pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr); } } static void geodeide_setup_channel(struct ata_channel *chp) { struct ata_drive_datas *drvp; struct pciide_channel *cp = CHAN_TO_PCHAN(chp); struct pciide_softc *sc = CHAN_TO_PCIIDE(chp); int channel = chp->ch_channel; int drive, s; u_int32_t dma_timing; u_int8_t idedma_ctl; const int32_t *geode_pio; const int32_t *geode_dma; const int32_t *geode_udma; bus_size_t dmaoff, piooff; switch (sc->sc_pp->ide_product) { case PCI_PRODUCT_CYRIX_CX5530_IDE: geode_pio = geode_cs5530_pio; geode_dma = geode_cs5530_dma; geode_udma = geode_cs5530_udma; break; case PCI_PRODUCT_NS_SC1100_IDE: default: /* XXX gcc */ geode_pio = geode_sc1100_pio; geode_dma = geode_sc1100_dma; geode_udma = geode_sc1100_udma; break; } /* setup DMA if needed */ pciide_channel_dma_setup(cp); idedma_ctl = 0; /* Per drive settings */ for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; switch (sc->sc_pp->ide_product) { case PCI_PRODUCT_CYRIX_CX5530_IDE: dmaoff = CS5530_DMA_REG(channel, drive); piooff = CS5530_PIO_REG(channel, drive); dma_timing = CS5530_DMA_REG_PIO_FORMAT; break; case PCI_PRODUCT_NS_SC1100_IDE: default: /* XXX gcc */ dmaoff = SC1100_DMA_REG(channel, drive); piooff = SC1100_PIO_REG(channel, drive); dma_timing = 0; break; } /* add timing values, setup DMA if needed */ if (drvp->drive_flags & DRIVE_UDMA) { /* Use Ultra-DMA */ dma_timing |= geode_udma[drvp->UDMA_mode]; idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } else if (drvp->drive_flags & DRIVE_DMA) { /* use Multiword DMA */ dma_timing |= geode_dma[drvp->DMA_mode]; idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); } else { /* PIO only */ s = splbio(); drvp->drive_flags &= ~(DRIVE_UDMA | DRIVE_DMA); splx(s); } switch (sc->sc_pp->ide_product) { case PCI_PRODUCT_CYRIX_CX5530_IDE: bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, dmaoff, dma_timing); bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, piooff, geode_pio[drvp->PIO_mode]); break; case PCI_PRODUCT_NS_SC1100_IDE: pci_conf_write(sc->sc_pc, sc->sc_tag, dmaoff, dma_timing); pci_conf_write(sc->sc_pc, sc->sc_tag, piooff, geode_pio[drvp->PIO_mode]); break; } } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0, idedma_ctl); } } static int geodeide_dma_init(void *v, int channel, int drive, void *databuf, size_t datalen, int flags) { /* * If the buffer is not properly aligned, we can't allow DMA * and need to fall back to PIO. */ if (((uintptr_t)databuf) & 0xf) return (EINVAL); return (pciide_dma_init(v, channel, drive, databuf, datalen, flags)); }