/* $NetBSD: rf.c,v 1.4 2003/08/13 08:08:48 ragge Exp $ */ /* * Copyright (c) 2002 Jochen Kunz. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Jochen Kunz may not be used to endorse or promote * products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY JOCHEN KUNZ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL JOCHEN KUNZ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* TODO: - Better LBN bound checking, block padding for SD disks. - Formating / "Set Density" - Better error handling / detaild error reason reportnig. */ #include __KERNEL_RCSID(0, "$NetBSD: rf.c,v 1.4 2003/08/13 08:08:48 ragge Exp $"); /* autoconfig stuff */ #include #include #include #include "locators.h" #include "ioconf.h" /* bus_space / bus_dma */ #include /* UniBus / QBus specific stuff */ #include /* disk interface */ #include #include #include /* general system data and functions */ #include #include #include /* physio / buffer handling */ #include /* tsleep / sleep / wakeup */ #include /* hz for above */ #include /* bitdefinitions for RX211 */ #include #define RFS_DENS 0x0001 /* single or double density */ #define RFS_AD 0x0002 /* density auto detect */ #define RFS_NOTINIT 0x0000 /* not initialized */ #define RFS_PROBING 0x0010 /* density detect / verify started */ #define RFS_FBUF 0x0020 /* Fill Buffer */ #define RFS_EBUF 0x0030 /* Empty Buffer */ #define RFS_WSEC 0x0040 /* Write Sector */ #define RFS_RSEC 0x0050 /* Read Sector */ #define RFS_SMD 0x0060 /* Set Media Density */ #define RFS_RSTAT 0x0070 /* Read Status */ #define RFS_WDDS 0x0080 /* Write Deleted Data Sector */ #define RFS_REC 0x0090 /* Read Error Code */ #define RFS_IDLE 0x00a0 /* controller is idle */ #define RFS_CMDS 0x00f0 /* command mask */ #define RFS_OPEN_A 0x0100 /* partition a open */ #define RFS_OPEN_B 0x0200 /* partition b open */ #define RFS_OPEN_C 0x0400 /* partition c open */ #define RFS_OPEN_MASK 0x0f00 /* mask for open partitions */ #define RFS_OPEN_SHIFT 8 /* to shift 1 to get RFS_OPEN_A */ #define RFS_SETCMD(rf, state) ((rf) = ((rf) & ~RFS_CMDS) | (state)) /* autoconfig stuff */ static int rfc_match(struct device *, struct cfdata *, void *); static void rfc_attach(struct device *, struct device *, void *); static int rf_match(struct device *, struct cfdata *, void *); static void rf_attach(struct device *, struct device *, void *); static int rf_print(void *, const char *); /* device interfce functions / interface to disk(9) */ dev_type_open(rfopen); dev_type_close(rfclose); dev_type_read(rfread); dev_type_write(rfwrite); dev_type_ioctl(rfioctl); dev_type_strategy(rfstrategy); dev_type_dump(rfdump); dev_type_size(rfsize); /* Entries in block and character major device number switch table. */ const struct bdevsw rf_bdevsw = { rfopen, rfclose, rfstrategy, rfioctl, rfdump, rfsize, D_DISK }; const struct cdevsw rf_cdevsw = { rfopen, rfclose, rfread, rfwrite, rfioctl, nostop, notty, nopoll, nommap, nokqfilter, D_DISK }; struct rfc_softc { struct device sc_dev; /* common device data */ struct device *sc_childs[2]; /* child devices */ struct evcnt sc_intr_count; /* Interrupt counter for statistics */ struct buf *sc_curbuf; /* buf that is currently in work */ bus_space_tag_t sc_iot; /* bus_space IO tag */ bus_space_handle_t sc_ioh; /* bus_space IO handle */ bus_dma_tag_t sc_dmat; /* bus_dma DMA tag */ bus_dmamap_t sc_dmam; /* bus_dma DMA map */ caddr_t sc_bufidx; /* current position in buffer data */ int sc_curchild; /* child whos bufq is in work */ int sc_bytesleft; /* bytes left to transfer */ u_int8_t type; /* controller type, 1 or 2 */ }; CFATTACH_DECL( rfc, sizeof(struct rfc_softc), rfc_match, rfc_attach, NULL, NULL ); struct rf_softc { struct device sc_dev; /* common device data */ struct disk sc_disk; /* common disk device data */ struct bufq_state sc_bufq; /* queue of pending transfers */ int sc_state; /* state of drive */ u_int8_t sc_dnum; /* drive number, 0 or 1 */ }; CFATTACH_DECL( rf, sizeof(struct rf_softc), rf_match, rf_attach, NULL, NULL ); struct rfc_attach_args { u_int8_t type; /* controller type, 1 or 2 */ u_int8_t dnum; /* drive number, 0 or 1 */ }; struct dkdriver rfdkdriver = { rfstrategy }; /* helper functions */ int rfc_sendcmd(struct rfc_softc *, int, int, int); struct rf_softc* get_new_buf( struct rfc_softc *); static void rfc_intr(void *); /* * Issue a reset command to the controller and look for the bits in * RX2CS and RX2ES. * RX2CS_RX02 and / or RX2CS_DD can be set, * RX2ES has to be set, all other bits must be 0 */ int rfc_match(struct device *parent, struct cfdata *match, void *aux) { struct uba_attach_args *ua = aux; int i; /* Issue reset command. */ bus_space_write_2(ua->ua_iot, ua->ua_ioh, RX2CS, RX2CS_INIT); /* Wait for the controller to become ready, that is when * RX2CS_DONE, RX2ES_RDY and RX2ES_ID are set. */ for (i = 0 ; i < 20 ; i++) { if ((bus_space_read_2(ua->ua_iot, ua->ua_ioh, RX2CS) & RX2CS_DONE) != 0 && (bus_space_read_2(ua->ua_iot, ua->ua_ioh, RX2ES) & (RX2ES_RDY | RX2ES_ID)) != 0) break; DELAY(100000); /* wait 100ms */ } /* * Give up if the timeout has elapsed * and the controller is not ready. */ if (i >= 20) return(0); /* * Issue a Read Status command with interrupt enabled. * The uba(4) driver wants to catch the interrupt to get the * interrupt vector and level of the device */ bus_space_write_2(ua->ua_iot, ua->ua_ioh, RX2CS, RX2CS_RSTAT | RX2CS_IE); /* * Wait for command to finish, ignore errors and * abort if the controller does not respond within the timeout */ for (i = 0 ; i < 20 ; i++) { if ((bus_space_read_2(ua->ua_iot, ua->ua_ioh, RX2CS) & (RX2CS_DONE | RX2CS_IE)) != 0 && (bus_space_read_2(ua->ua_iot, ua->ua_ioh, RX2ES) & RX2ES_RDY) != 0 ) return(1); DELAY(100000); /* wait 100ms */ } return(0); } /* #define RX02_PROBE 1 */ #ifdef RX02_PROBE /* * Probe the density of an inserted floppy disk. * This is done by reading a sector from disk. * Return -1 on error, 0 on SD and 1 on DD. */ int rfcprobedens(struct rfc_softc *, int); int rfcprobedens(struct rfc_softc *rfc_sc, int dnum) { int dens_flag; int i; dens_flag = 0; do { bus_space_write_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS, RX2CS_RSEC | (dens_flag == 0 ? 0 : RX2CS_DD) | (dnum == 0 ? 0 : RX2CS_US)); /* * Transfer request set? * Wait 50us, the controller needs this time to setle */ DELAY(50); if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_TR) == 0) { printf("%s: did not respond to Read Sector CMD(1)\n", rfc_sc->sc_dev.dv_xname); return(-1); } bus_space_write_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2SA, 1); /* Wait 50us, the controller needs this time to setle */ DELAY(50); if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_TR) == 0) { printf("%s: did not respond to Read Sector CMD(2)\n", rfc_sc->sc_dev.dv_xname); return(-1); } bus_space_write_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2TA, 1); /* Wait for the command to finish */ for (i = 0 ; i < 200 ; i++) { if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_DONE) != 0) break; DELAY(10000); /* wait 10ms */ } if (i >= 200) { printf("%s: did not respond to Read Sector CMD(3)\n", rfc_sc->sc_dev.dv_xname); return(-1); } if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_ERR) == 0) return(dens_flag); } while (rfc_sc->type == 2 && dens_flag++ == 0); return(-1); } #endif /* RX02_PROBE */ void rfc_attach(struct device *parent, struct device *self, void *aux) { struct rfc_softc *rfc_sc = (struct rfc_softc *)self; struct uba_attach_args *ua = aux; struct rfc_attach_args rfc_aa; int i; rfc_sc->sc_iot = ua->ua_iot; rfc_sc->sc_ioh = ua->ua_ioh; rfc_sc->sc_dmat = ua->ua_dmat; rfc_sc->sc_curbuf = NULL; /* Tell the QBus busdriver about our interrupt handler. */ uba_intr_establish(ua->ua_icookie, ua->ua_cvec, rfc_intr, rfc_sc, &rfc_sc->sc_intr_count); /* Attach to the interrupt counter, see evcnt(9) */ evcnt_attach_dynamic(&rfc_sc->sc_intr_count, EVCNT_TYPE_INTR, ua->ua_evcnt, rfc_sc->sc_dev.dv_xname, "intr"); /* get a bus_dma(9) handle */ i = bus_dmamap_create(rfc_sc->sc_dmat, RX2_BYTE_DD, 1, RX2_BYTE_DD, 0, BUS_DMA_ALLOCNOW, &rfc_sc->sc_dmam); if (i != 0) { printf("rfc_attach: Error creating bus dma map: %d\n", i); return; } /* Issue reset command. */ bus_space_write_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS, RX2CS_INIT); /* * Wait for the controller to become ready, that is when * RX2CS_DONE, RX2ES_RDY and RX2ES_ID are set. */ for (i = 0 ; i < 20 ; i++) { if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_DONE) != 0 && (bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2ES) & (RX2ES_RDY | RX2ES_ID)) != 0) break; DELAY(100000); /* wait 100ms */ } /* * Give up if the timeout has elapsed * and the controller is not ready. */ if (i >= 20) { printf(": did not respond to INIT CMD\n"); return; } /* Is ths a RX01 or a RX02? */ if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_RX02) != 0) { rfc_sc->type = 2; rfc_aa.type = 2; } else { rfc_sc->type = 1; rfc_aa.type = 1; } printf(": RX0%d\n", rfc_sc->type); #ifndef RX02_PROBE /* * Bouth disk drievs and the controller are one physical unit. * If we found the controller, there will be bouth disk drievs. * So attach them. */ rfc_aa.dnum = 0; rfc_sc->sc_childs[0] = config_found(&rfc_sc->sc_dev, &rfc_aa,rf_print); rfc_aa.dnum = 1; rfc_sc->sc_childs[1] = config_found(&rfc_sc->sc_dev, &rfc_aa,rf_print); #else /* RX02_PROBE */ /* * There are clones of the DEC RX system with standard shugart * interface. In this case we can not be sure that there are * bouth disk drievs. So we want to do a detection of attached * drives. This is done by reading a sector from disk. This means * that there must be a formated disk in the drive at boot time. * This is bad, but I did not find an other way to detect the * (non)existence of a floppy drive. */ if (rfcprobedens(rfc_sc, 0) >= 0) { rfc_aa.dnum = 0; rfc_sc->sc_childs[0] = config_found(&rfc_sc->sc_dev, &rfc_aa, rf_print); } else rfc_sc->sc_childs[0] = NULL; if (rfcprobedens(rfc_sc, 1) >= 0) { rfc_aa.dnum = 1; rfc_sc->sc_childs[1] = config_found(&rfc_sc->sc_dev, &rfc_aa, rf_print); } else rfc_sc->sc_childs[1] = NULL; #endif /* RX02_PROBE */ return; } int rf_match(struct device *parent, struct cfdata *match, void *aux) { struct rfc_attach_args *rfc_aa = aux; /* * Only attach if the locator is wildcarded or * if the specified locator addresses the current device. */ if (match->cf_loc[RFCCF_DRIVE] == RFCCF_DRIVE_DEFAULT || match->cf_loc[RFCCF_DRIVE] == rfc_aa->dnum) return(1); return(0); } void rf_attach(struct device *parent, struct device *self, void *aux) { struct rf_softc *rf_sc = (struct rf_softc *)self; struct rfc_attach_args *rfc_aa = (struct rfc_attach_args *)aux; struct rfc_softc *rfc_sc; struct disklabel *dl; rfc_sc = (struct rfc_softc *)rf_sc->sc_dev.dv_parent; rf_sc->sc_dnum = rfc_aa->dnum; rf_sc->sc_state = 0; rf_sc->sc_disk.dk_name = rf_sc->sc_dev.dv_xname; rf_sc->sc_disk.dk_driver = &rfdkdriver; disk_attach(&rf_sc->sc_disk); dl = rf_sc->sc_disk.dk_label; dl->d_type = DTYPE_FLOPPY; /* drive type */ dl->d_magic = DISKMAGIC; /* the magic number */ dl->d_magic2 = DISKMAGIC; dl->d_typename[0] = 'R'; dl->d_typename[1] = 'X'; dl->d_typename[2] = '0'; dl->d_typename[3] = rfc_sc->type == 1 ? '1' : '2'; /* type name */ dl->d_typename[4] = '\0'; dl->d_secsize = DEV_BSIZE; /* bytes per sector */ /* * Fill in some values to have a initialized data structure. Some * values will be reset by rfopen() depending on the actual density. */ dl->d_nsectors = RX2_SECTORS; /* sectors per track */ dl->d_ntracks = 1; /* tracks per cylinder */ dl->d_ncylinders = RX2_TRACKS; /* cylinders per unit */ dl->d_secpercyl = RX2_SECTORS; /* sectors per cylinder */ dl->d_secperunit = RX2_SECTORS * RX2_TRACKS; /* sectors per unit */ dl->d_rpm = 360; /* rotational speed */ dl->d_interleave = 1; /* hardware sector interleave */ /* number of partitions in following */ dl->d_npartitions = MAXPARTITIONS; dl->d_bbsize = 0; /* size of boot area at sn0, bytes */ dl->d_sbsize = 0; /* max size of fs superblock, bytes */ /* number of sectors in partition */ dl->d_partitions[0].p_size = 501; dl->d_partitions[0].p_offset = 0; /* starting sector */ dl->d_partitions[0].p_fsize = 0; /* fs basic fragment size */ dl->d_partitions[0].p_fstype = 0; /* fs type */ dl->d_partitions[0].p_frag = 0; /* fs fragments per block */ dl->d_partitions[1].p_size = RX2_SECTORS * RX2_TRACKS / 2; dl->d_partitions[1].p_offset = 0; /* starting sector */ dl->d_partitions[1].p_fsize = 0; /* fs basic fragment size */ dl->d_partitions[1].p_fstype = 0; /* fs type */ dl->d_partitions[1].p_frag = 0; /* fs fragments per block */ dl->d_partitions[2].p_size = RX2_SECTORS * RX2_TRACKS; dl->d_partitions[2].p_offset = 0; /* starting sector */ dl->d_partitions[2].p_fsize = 0; /* fs basic fragment size */ dl->d_partitions[2].p_fstype = 0; /* fs type */ dl->d_partitions[2].p_frag = 0; /* fs fragments per block */ bufq_alloc(&rf_sc->sc_bufq, BUFQ_DISKSORT | BUFQ_SORT_CYLINDER); printf("\n"); return; } int rf_print(void *aux, const char *name) { struct rfc_attach_args *rfc_aa = aux; if (name != NULL) aprint_normal("RX0%d at %s", rfc_aa->type, name); aprint_normal(" drive %d", rfc_aa->dnum); return(UNCONF); } /* Send a command to the controller */ int rfc_sendcmd(struct rfc_softc *rfc_sc, int cmd, int data1, int data2) { /* Write command to CSR. */ bus_space_write_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS, cmd); /* Wait 50us, the controller needs this time to setle. */ DELAY(50); /* Write parameter 1 to DBR */ if ((cmd & RX2CS_FC) != RX2CS_RSTAT) { /* Transfer request set? */ if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_TR) == 0) { printf("%s: did not respond to CMD %x (1)\n", rfc_sc->sc_dev.dv_xname, cmd); return(-1); } bus_space_write_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2DB, data1); } /* Write parameter 2 to DBR */ if ((cmd & RX2CS_FC) <= RX2CS_RSEC || (cmd & RX2CS_FC) == RX2CS_WDDS) { /* Wait 50us, the controller needs this time to setle. */ DELAY(50); /* Transfer request set? */ if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_TR) == 0) { printf("%s: did not respond to CMD %x (2)\n", rfc_sc->sc_dev.dv_xname, cmd); return(-1); } bus_space_write_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2DB, data2); } return(1); } void rfstrategy(struct buf *buf) { struct rf_softc *rf_sc; struct rfc_softc *rfc_sc; int i; i = DISKUNIT(buf->b_dev); if (i >= rf_cd.cd_ndevs || (rf_sc = rf_cd.cd_devs[i]) == NULL) { buf->b_flags |= B_ERROR; buf->b_error = ENXIO; biodone(buf); return; } rfc_sc = (struct rfc_softc *)rf_sc->sc_dev.dv_parent; /* We are going to operate on a non open dev? PANIC! */ if ((rf_sc->sc_state & 1 << (DISKPART(buf->b_dev) + RFS_OPEN_SHIFT)) == 0) panic("rfstrategy: can not operate on non-open drive %s " "partition %d", rf_sc->sc_dev.dv_xname, DISKPART(buf->b_dev)); if (buf->b_bcount == 0) { biodone(buf); return; } /* * BUFQ_PUT() operates on b_rawblkno. rfstrategy() gets * only b_blkno that is partition relative. As a floppy does not * have partitions b_rawblkno == b_blkno. */ buf->b_rawblkno = buf->b_blkno; /* * from sys/kern/subr_disk.c: * Seek sort for disks. We depend on the driver which calls us using * b_resid as the current cylinder number. */ i = splbio(); if (rfc_sc->sc_curbuf == NULL) { rfc_sc->sc_curchild = rf_sc->sc_dnum; rfc_sc->sc_curbuf = buf; rfc_sc->sc_bufidx = buf->b_un.b_addr; rfc_sc->sc_bytesleft = buf->b_bcount; rfc_intr(rfc_sc); } else { buf->b_resid = buf->b_blkno / RX2_SECTORS; BUFQ_PUT(&rf_sc->sc_bufq, buf); buf->b_resid = 0; } splx(i); return; } /* * Look if there is an other buffer in the bufferqueue of this drive * and start to process it if there is one. * If the bufferqueue is empty, look at the bufferqueue of the other drive * that is attached to this controller. * Start procesing the bufferqueue of the other drive if it isn't empty. * Return a pointer to the softc structure of the drive that is now * ready to process a buffer or NULL if there is no buffer in either queues. */ struct rf_softc* get_new_buf( struct rfc_softc *rfc_sc) { struct rf_softc *rf_sc; struct rf_softc *other_drive; rf_sc = (struct rf_softc *)rfc_sc->sc_childs[rfc_sc->sc_curchild]; rfc_sc->sc_curbuf = BUFQ_GET(&rf_sc->sc_bufq); if (rfc_sc->sc_curbuf != NULL) { rfc_sc->sc_bufidx = rfc_sc->sc_curbuf->b_un.b_addr; rfc_sc->sc_bytesleft = rfc_sc->sc_curbuf->b_bcount; } else { RFS_SETCMD(rf_sc->sc_state, RFS_IDLE); other_drive = (struct rf_softc *) rfc_sc->sc_childs[ rfc_sc->sc_curchild == 0 ? 1 : 0]; if (other_drive != NULL && BUFQ_PEEK(&other_drive->sc_bufq) != NULL) { rfc_sc->sc_curchild = rfc_sc->sc_curchild == 0 ? 1 : 0; rf_sc = other_drive; rfc_sc->sc_curbuf = BUFQ_GET(&rf_sc->sc_bufq); rfc_sc->sc_bufidx = rfc_sc->sc_curbuf->b_un.b_addr; rfc_sc->sc_bytesleft = rfc_sc->sc_curbuf->b_bcount; } else return(NULL); } return(rf_sc); } void rfc_intr(void *intarg) { struct rfc_softc *rfc_sc = intarg; struct rf_softc *rf_sc; int i; rf_sc = (struct rf_softc *)rfc_sc->sc_childs[rfc_sc->sc_curchild]; do { /* * First clean up from previous command... */ switch (rf_sc->sc_state & RFS_CMDS) { case RFS_PROBING: /* density detect / verify started */ disk_unbusy(&rf_sc->sc_disk, 0, 1); if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_ERR) == 0) { RFS_SETCMD(rf_sc->sc_state, RFS_IDLE); wakeup(rf_sc); } else { if (rfc_sc->type == 2 && (rf_sc->sc_state & RFS_DENS) == 0 && (rf_sc->sc_state & RFS_AD) != 0) { /* retry at DD */ rf_sc->sc_state |= RFS_DENS; disk_busy(&rf_sc->sc_disk); if (rfc_sendcmd(rfc_sc, RX2CS_RSEC | RX2CS_IE | RX2CS_DD | (rf_sc->sc_dnum == 0 ? 0 : RX2CS_US), 1, 1) < 0) { disk_unbusy(&rf_sc->sc_disk, 0, 1); RFS_SETCMD(rf_sc->sc_state, RFS_NOTINIT); wakeup(rf_sc); } } else { printf("%s: density error.\n", rf_sc->sc_dev.dv_xname); RFS_SETCMD(rf_sc->sc_state,RFS_NOTINIT); wakeup(rf_sc); } } return; case RFS_IDLE: /* controller is idle */ if (rfc_sc->sc_curbuf->b_bcount % ((rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD) != 0) { /* * can only handle blocks that are a multiple * of the physical block size */ rfc_sc->sc_curbuf->b_flags |= B_ERROR; } RFS_SETCMD(rf_sc->sc_state, (rfc_sc->sc_curbuf->b_flags & B_READ) != 0 ? RFS_RSEC : RFS_FBUF); break; case RFS_RSEC: /* Read Sector */ disk_unbusy(&rf_sc->sc_disk, 0, 1); /* check for errors */ if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_ERR) != 0) { /* should do more verbose error reporting */ printf("rfc_intr: Error reading secotr: %x\n", bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2ES) ); rfc_sc->sc_curbuf->b_flags |= B_ERROR; } RFS_SETCMD(rf_sc->sc_state, RFS_EBUF); break; case RFS_WSEC: /* Write Sector */ i = (rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD; disk_unbusy(&rf_sc->sc_disk, i, 0); /* check for errors */ if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_ERR) != 0) { /* should do more verbose error reporting */ printf("rfc_intr: Error writing secotr: %x\n", bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2ES) ); rfc_sc->sc_curbuf->b_flags |= B_ERROR; break; } if (rfc_sc->sc_bytesleft > i) { rfc_sc->sc_bytesleft -= i; rfc_sc->sc_bufidx += i; } else { biodone(rfc_sc->sc_curbuf); rf_sc = get_new_buf( rfc_sc); if (rf_sc == NULL) return; } RFS_SETCMD(rf_sc->sc_state, (rfc_sc->sc_curbuf->b_flags & B_READ) != 0 ? RFS_RSEC : RFS_FBUF); break; case RFS_FBUF: /* Fill Buffer */ disk_unbusy(&rf_sc->sc_disk, 0, 0); bus_dmamap_unload(rfc_sc->sc_dmat, rfc_sc->sc_dmam); /* check for errors */ if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_ERR) != 0) { /* should do more verbose error reporting */ printf("rfc_intr: Error while DMA: %x\n", bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2ES)); rfc_sc->sc_curbuf->b_flags |= B_ERROR; } RFS_SETCMD(rf_sc->sc_state, RFS_WSEC); break; case RFS_EBUF: /* Empty Buffer */ i = (rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD; disk_unbusy(&rf_sc->sc_disk, i, 1); bus_dmamap_unload(rfc_sc->sc_dmat, rfc_sc->sc_dmam); /* check for errors */ if ((bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2CS) & RX2CS_ERR) != 0) { /* should do more verbose error reporting */ printf("rfc_intr: Error while DMA: %x\n", bus_space_read_2(rfc_sc->sc_iot, rfc_sc->sc_ioh, RX2ES)); rfc_sc->sc_curbuf->b_flags |= B_ERROR; break; } if (rfc_sc->sc_bytesleft > i) { rfc_sc->sc_bytesleft -= i; rfc_sc->sc_bufidx += i; } else { biodone(rfc_sc->sc_curbuf); rf_sc = get_new_buf( rfc_sc); if (rf_sc == NULL) return; } RFS_SETCMD(rf_sc->sc_state, (rfc_sc->sc_curbuf->b_flags & B_READ) != 0 ? RFS_RSEC : RFS_FBUF); break; case RFS_NOTINIT: /* Device is not open */ case RFS_SMD: /* Set Media Density */ case RFS_RSTAT: /* Read Status */ case RFS_WDDS: /* Write Deleted Data Sector */ case RFS_REC: /* Read Error Code */ default: panic("Impossible state in rfc_intr(1).\n"); } if ((rfc_sc->sc_curbuf->b_flags & B_ERROR) != 0) { /* * An error occured while processing this buffer. * Finish it and try to get a new buffer to process. * Return if there are no buffers in the queues. * This loops until the queues are empty or a new * action was successfully scheduled. */ rfc_sc->sc_curbuf->b_resid = rfc_sc->sc_bytesleft; rfc_sc->sc_curbuf->b_error = EIO; biodone(rfc_sc->sc_curbuf); rf_sc = get_new_buf( rfc_sc); if (rf_sc == NULL) return; continue; } /* * ... then initiate next command. */ switch (rf_sc->sc_state & RFS_CMDS) { case RFS_EBUF: /* Empty Buffer */ i = bus_dmamap_load(rfc_sc->sc_dmat, rfc_sc->sc_dmam, rfc_sc->sc_bufidx, (rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD, rfc_sc->sc_curbuf->b_proc, BUS_DMA_NOWAIT); if (i != 0) { printf("rfc_intr: Error loading dmamap: %d\n", i); rfc_sc->sc_curbuf->b_flags |= B_ERROR; break; } disk_busy(&rf_sc->sc_disk); if (rfc_sendcmd(rfc_sc, RX2CS_EBUF | RX2CS_IE | ((rf_sc->sc_state & RFS_DENS) == 0 ? 0 : RX2CS_DD) | (rf_sc->sc_dnum == 0 ? 0 : RX2CS_US) | ((rfc_sc->sc_dmam->dm_segs[0].ds_addr & 0x30000) >>4), ((rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD) / 2, rfc_sc->sc_dmam->dm_segs[0].ds_addr & 0xffff) < 0) { disk_unbusy(&rf_sc->sc_disk, 0, 1); rfc_sc->sc_curbuf->b_flags |= B_ERROR; bus_dmamap_unload(rfc_sc->sc_dmat, rfc_sc->sc_dmam); } break; case RFS_FBUF: /* Fill Buffer */ i = bus_dmamap_load(rfc_sc->sc_dmat, rfc_sc->sc_dmam, rfc_sc->sc_bufidx, (rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD, rfc_sc->sc_curbuf->b_proc, BUS_DMA_NOWAIT); if (i != 0) { printf("rfc_intr: Error loading dmamap: %d\n", i); rfc_sc->sc_curbuf->b_flags |= B_ERROR; break; } disk_busy(&rf_sc->sc_disk); if (rfc_sendcmd(rfc_sc, RX2CS_FBUF | RX2CS_IE | ((rf_sc->sc_state & RFS_DENS) == 0 ? 0 : RX2CS_DD) | (rf_sc->sc_dnum == 0 ? 0 : RX2CS_US) | ((rfc_sc->sc_dmam->dm_segs[0].ds_addr & 0x30000)>>4), ((rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD) / 2, rfc_sc->sc_dmam->dm_segs[0].ds_addr & 0xffff) < 0) { disk_unbusy(&rf_sc->sc_disk, 0, 0); rfc_sc->sc_curbuf->b_flags |= B_ERROR; bus_dmamap_unload(rfc_sc->sc_dmat, rfc_sc->sc_dmam); } break; case RFS_WSEC: /* Write Sector */ i = (rfc_sc->sc_curbuf->b_bcount - rfc_sc->sc_bytesleft + rfc_sc->sc_curbuf->b_blkno * DEV_BSIZE) / ((rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD); if (i > RX2_TRACKS * RX2_SECTORS) { rfc_sc->sc_curbuf->b_flags |= B_ERROR; break; } disk_busy(&rf_sc->sc_disk); if (rfc_sendcmd(rfc_sc, RX2CS_WSEC | RX2CS_IE | (rf_sc->sc_dnum == 0 ? 0 : RX2CS_US) | ((rf_sc->sc_state& RFS_DENS) == 0 ? 0 : RX2CS_DD), i % RX2_SECTORS + 1, i / RX2_SECTORS) < 0) { disk_unbusy(&rf_sc->sc_disk, 0, 0); rfc_sc->sc_curbuf->b_flags |= B_ERROR; } break; case RFS_RSEC: /* Read Sector */ i = (rfc_sc->sc_curbuf->b_bcount - rfc_sc->sc_bytesleft + rfc_sc->sc_curbuf->b_blkno * DEV_BSIZE) / ((rf_sc->sc_state & RFS_DENS) == 0 ? RX2_BYTE_SD : RX2_BYTE_DD); if (i > RX2_TRACKS * RX2_SECTORS) { rfc_sc->sc_curbuf->b_flags |= B_ERROR; break; } disk_busy(&rf_sc->sc_disk); if (rfc_sendcmd(rfc_sc, RX2CS_RSEC | RX2CS_IE | (rf_sc->sc_dnum == 0 ? 0 : RX2CS_US) | ((rf_sc->sc_state& RFS_DENS) == 0 ? 0 : RX2CS_DD), i % RX2_SECTORS + 1, i / RX2_SECTORS) < 0) { disk_unbusy(&rf_sc->sc_disk, 0, 1); rfc_sc->sc_curbuf->b_flags |= B_ERROR; } break; case RFS_NOTINIT: /* Device is not open */ case RFS_PROBING: /* density detect / verify started */ case RFS_IDLE: /* controller is idle */ case RFS_SMD: /* Set Media Density */ case RFS_RSTAT: /* Read Status */ case RFS_WDDS: /* Write Deleted Data Sector */ case RFS_REC: /* Read Error Code */ default: panic("Impossible state in rfc_intr(2).\n"); } if ((rfc_sc->sc_curbuf->b_flags & B_ERROR) != 0) { /* * An error occured while processing this buffer. * Finish it and try to get a new buffer to process. * Return if there are no buffers in the queues. * This loops until the queues are empty or a new * action was successfully scheduled. */ rfc_sc->sc_curbuf->b_resid = rfc_sc->sc_bytesleft; rfc_sc->sc_curbuf->b_error = EIO; biodone(rfc_sc->sc_curbuf); rf_sc = get_new_buf( rfc_sc); if (rf_sc == NULL) return; continue; } } while ( 1 == 0 /* CONSTCOND */ ); return; } int rfdump(dev_t dev, daddr_t blkno, caddr_t va, size_t size) { /* A 0.5MB floppy is much to small to take a system dump... */ return(ENXIO); } int rfsize(dev_t dev) { return(-1); } int rfopen(dev_t dev, int oflags, int devtype, struct proc *p) { struct rf_softc *rf_sc; struct rfc_softc *rfc_sc; struct disklabel *dl; int unit; unit = DISKUNIT(dev); if (unit >= rf_cd.cd_ndevs || (rf_sc = rf_cd.cd_devs[unit]) == NULL) { return(ENXIO); } rfc_sc = (struct rfc_softc *)rf_sc->sc_dev.dv_parent; dl = rf_sc->sc_disk.dk_label; switch (DISKPART(dev)) { case 0: /* Part. a is single density. */ /* opening in single and double density is sensless */ if ((rf_sc->sc_state & RFS_OPEN_B) != 0 ) return(ENXIO); rf_sc->sc_state &= ~RFS_DENS; rf_sc->sc_state &= ~RFS_AD; rf_sc->sc_state |= RFS_OPEN_A; break; case 1: /* Part. b is double density. */ /* * Opening a singe density only drive in double * density or simultaneous opening in single and * double density is sensless. */ if (rfc_sc->type == 1 || (rf_sc->sc_state & RFS_OPEN_A) != 0 ) return(ENXIO); rf_sc->sc_state |= RFS_DENS; rf_sc->sc_state &= ~RFS_AD; rf_sc->sc_state |= RFS_OPEN_B; break; case 2: /* Part. c is auto density. */ rf_sc->sc_state |= RFS_AD; rf_sc->sc_state |= RFS_OPEN_C; break; default: return(ENXIO); break; } if ((rf_sc->sc_state & RFS_CMDS) == RFS_NOTINIT) { rfc_sc->sc_curchild = rf_sc->sc_dnum; /* * Controller is idle and density is not detected. * Start a density probe by issuing a read sector command * and sleep until the density probe finished. * Due to this it is imposible to open unformated media. * As the RX02/02 is not able to format its own media, * media must be purchased preformated. fsck DEC makreting! */ RFS_SETCMD(rf_sc->sc_state, RFS_PROBING); disk_busy(&rf_sc->sc_disk); if (rfc_sendcmd(rfc_sc, RX2CS_RSEC | RX2CS_IE | (rf_sc->sc_dnum == 0 ? 0 : RX2CS_US) | ((rf_sc->sc_state & RFS_DENS) == 0 ? 0 : RX2CS_DD), 1, 1) < 0) { rf_sc->sc_state = 0; return(ENXIO); } /* wait max. 2 sec for density probe to finish */ if (tsleep(rf_sc, PRIBIO | PCATCH, "density probe", 2 * hz) != 0 || (rf_sc->sc_state & RFS_CMDS) == RFS_NOTINIT) { /* timeout elapsed and / or somthing went wrong */ rf_sc->sc_state = 0; return(ENXIO); } } /* disklabel. We use different fake geometries for SD and DD. */ if ((rf_sc->sc_state & RFS_DENS) == 0) { dl->d_nsectors = 10; /* sectors per track */ dl->d_secpercyl = 10; /* sectors per cylinder */ dl->d_ncylinders = 50; /* cylinders per unit */ dl->d_secperunit = 501; /* sectors per unit */ /* number of sectors in partition */ dl->d_partitions[2].p_size = 500; } else { dl->d_nsectors = RX2_SECTORS / 2; /* sectors per track */ dl->d_secpercyl = RX2_SECTORS / 2; /* sectors per cylinder */ dl->d_ncylinders = RX2_TRACKS; /* cylinders per unit */ /* sectors per unit */ dl->d_secperunit = RX2_SECTORS * RX2_TRACKS / 2; /* number of sectors in partition */ dl->d_partitions[2].p_size = RX2_SECTORS * RX2_TRACKS / 2; } return(0); } int rfclose(dev_t dev, int fflag, int devtype, struct proc *p) { struct rf_softc *rf_sc; int unit; unit = DISKUNIT(dev); if (unit >= rf_cd.cd_ndevs || (rf_sc = rf_cd.cd_devs[unit]) == NULL) { return(ENXIO); } if ((rf_sc->sc_state & 1 << (DISKPART(dev) + RFS_OPEN_SHIFT)) == 0) panic("rfclose: can not close on non-open drive %s " "partition %d", rf_sc->sc_dev.dv_xname, DISKPART(dev)); else rf_sc->sc_state &= ~(1 << (DISKPART(dev) + RFS_OPEN_SHIFT)); if ((rf_sc->sc_state & RFS_OPEN_MASK) == 0) rf_sc->sc_state = 0; return(0); } int rfread(dev_t dev, struct uio *uio, int ioflag) { return(physio(rfstrategy, NULL, dev, B_READ, minphys, uio)); } int rfwrite(dev_t dev, struct uio *uio, int ioflag) { return(physio(rfstrategy, NULL, dev, B_WRITE, minphys, uio)); } int rfioctl(dev_t dev, u_long cmd, caddr_t data, int fflag, struct proc *p) { struct rf_softc *rf_sc; int unit; unit = DISKUNIT(dev); if (unit >= rf_cd.cd_ndevs || (rf_sc = rf_cd.cd_devs[unit]) == NULL) { return(ENXIO); } /* We are going to operate on a non open dev? PANIC! */ if ((rf_sc->sc_state & 1 << (DISKPART(dev) + RFS_OPEN_SHIFT)) == 0) panic("rfioctl: can not operate on non-open drive %s " "partition %d", rf_sc->sc_dev.dv_xname, DISKPART(dev)); switch (cmd) { /* get and set disklabel; DIOCGPART used internally */ case DIOCGDINFO: /* get */ memcpy(data, rf_sc->sc_disk.dk_label, sizeof(struct disklabel)); return(0); case DIOCSDINFO: /* set */ return(0); case DIOCWDINFO: /* set, update disk */ return(0); case DIOCGPART: /* get partition */ ((struct partinfo *)data)->disklab = rf_sc->sc_disk.dk_label; ((struct partinfo *)data)->part = &rf_sc->sc_disk.dk_label->d_partitions[DISKPART(dev)]; return(0); /* do format operation, read or write */ case DIOCRFORMAT: break; case DIOCWFORMAT: break; case DIOCSSTEP: /* set step rate */ break; case DIOCSRETRIES: /* set # of retries */ break; case DIOCKLABEL: /* keep/drop label on close? */ break; case DIOCWLABEL: /* write en/disable label */ break; /* case DIOCSBAD: / * set kernel dkbad */ break; /* */ case DIOCEJECT: /* eject removable disk */ break; case ODIOCEJECT: /* eject removable disk */ break; case DIOCLOCK: /* lock/unlock pack */ break; /* get default label, clear label */ case DIOCGDEFLABEL: break; case DIOCCLRLABEL: break; default: return(ENOTTY); } return(ENOTTY); }