/* $NetBSD: if_hme_pci.c,v 1.13 2002/12/26 22:59:51 itohy Exp $ */ /* * Copyright (c) 2000 Matthew R. Green * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * PCI front-end device driver for the HME ethernet device. */ #include __KERNEL_RCSID(0, "$NetBSD: if_hme_pci.c,v 1.13 2002/12/26 22:59:51 itohy Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef HME_USE_LOCAL_MAC_ADDRESS #ifdef __sparc__ #define HME_USE_LOCAL_MAC_ADDRESS 0 /* use system-wide address */ #else #define HME_USE_LOCAL_MAC_ADDRESS 1 #endif #endif struct hme_pci_softc { struct hme_softc hsc_hme; /* HME device */ bus_space_tag_t hsc_memt; bus_space_handle_t hsc_memh; void *hsc_ih; }; int hmematch_pci __P((struct device *, struct cfdata *, void *)); void hmeattach_pci __P((struct device *, struct device *, void *)); CFATTACH_DECL(hme_pci, sizeof(struct hme_pci_softc), hmematch_pci, hmeattach_pci, NULL, NULL); int hmematch_pci(parent, cf, aux) struct device *parent; struct cfdata *cf; void *aux; { struct pci_attach_args *pa = aux; if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SUN && PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SUN_HMENETWORK) return (1); return (0); } void hmeattach_pci(parent, self, aux) struct device *parent, *self; void *aux; { struct pci_attach_args *pa = aux; struct hme_pci_softc *hsc = (void *)self; struct hme_softc *sc = &hsc->hsc_hme; pci_intr_handle_t ih; pcireg_t csr; const char *intrstr; int type; #if HME_USE_LOCAL_MAC_ADDRESS struct pci_attach_args ebus_pa; pcireg_t ebus_cl, ebus_id; u_int8_t *enaddr; bus_space_tag_t romt; bus_space_handle_t romh; bus_size_t romsize; u_int8_t buf[32]; int dataoff, vpdoff; struct pci_vpd *vpd; static const u_int8_t promhdr[] = { 0x55, 0xaa }; #define PROMHDR_PTR_DATA 0x18 static const u_int8_t promdat[] = { 0x50, 0x43, 0x49, 0x52, /* "PCIR" */ PCI_VENDOR_SUN & 0xff, PCI_VENDOR_SUN >> 8, PCI_PRODUCT_SUN_HMENETWORK & 0xff, PCI_PRODUCT_SUN_HMENETWORK >> 8 }; #define PROMDATA_PTR_VPD 0x08 #define PROMDATA_DATA2 0x0a static const u_int8_t promdat2[] = { 0x18, 0x00, /* structure length */ 0x00, /* structure revision */ 0x00, /* interface revision */ PCI_SUBCLASS_NETWORK_ETHERNET, /* subclass code */ PCI_CLASS_NETWORK /* class code */ }; #endif /* HME_USE_LOCAL_MAC_ADDRESS */ #ifdef __sparc__ /* XXX the following declarations should be elsewhere */ extern void myetheraddr __P((u_char *)); #endif printf(": Sun Happy Meal Ethernet, rev. %d\n", PCI_REVISION(pa->pa_class)); /* * enable io/memory-space accesses. this is kinda of gross; but # the hme comes up with neither IO space enabled, or memory space. */ if (pa->pa_memt) pa->pa_flags |= PCI_FLAGS_MEM_ENABLED; if (pa->pa_iot) pa->pa_flags |= PCI_FLAGS_IO_ENABLED; csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); if (pa->pa_memt) { type = PCI_MAPREG_TYPE_MEM; csr |= PCI_COMMAND_MEM_ENABLE; sc->sc_bustag = pa->pa_memt; } else { type = PCI_MAPREG_TYPE_IO; csr |= PCI_COMMAND_IO_ENABLE; sc->sc_bustag = pa->pa_iot; } pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, csr | PCI_COMMAND_MEM_ENABLE); sc->sc_dmatag = pa->pa_dmat; sc->sc_pci = 1; /* XXXXX should all be done in bus_dma. */ /* * Map five register banks: * * bank 0: HME SEB registers: +0x0000 * bank 1: HME ETX registers: +0x2000 * bank 2: HME ERX registers: +0x4000 * bank 3: HME MAC registers: +0x6000 * bank 4: HME MIF registers: +0x7000 * */ #define PCI_HME_BASEADDR 0x10 if (pci_mapreg_map(pa, PCI_HME_BASEADDR, type, 0, &hsc->hsc_memt, &hsc->hsc_memh, NULL, NULL) != 0) { printf("%s: unable to map device registers\n", sc->sc_dev.dv_xname); return; } sc->sc_seb = hsc->hsc_memh; if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x2000, 0x1000, &sc->sc_etx)) { printf("%s: unable to subregion ETX registers\n", sc->sc_dev.dv_xname); return; } if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x4000, 0x1000, &sc->sc_erx)) { printf("%s: unable to subregion ERX registers\n", sc->sc_dev.dv_xname); return; } if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x6000, 0x1000, &sc->sc_mac)) { printf("%s: unable to subregion MAC registers\n", sc->sc_dev.dv_xname); return; } if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x7000, 0x1000, &sc->sc_mif)) { printf("%s: unable to subregion MIF registers\n", sc->sc_dev.dv_xname); return; } #if HME_USE_LOCAL_MAC_ADDRESS /* * Dig out VPD (vital product data) and acquire Ethernet address. * The VPD of hme resides in the Boot PROM (PCI FCode) attached * to the EBus interface. */ /* * ``Writing FCode 3.x Programs'' (newer ones, dated 1997 and later) * chapter 2 describes the data structure. */ enaddr = NULL; /* get a PCI tag for the EBus bridge (function 0 of the same device) */ ebus_pa = *pa; ebus_pa.pa_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0); ebus_cl = pci_conf_read(ebus_pa.pa_pc, ebus_pa.pa_tag, PCI_CLASS_REG); ebus_id = pci_conf_read(ebus_pa.pa_pc, ebus_pa.pa_tag, PCI_ID_REG); #define PCI_EBUS2_BOOTROM 0x10 if (PCI_CLASS(ebus_cl) == PCI_CLASS_BRIDGE && PCI_PRODUCT(ebus_id) == PCI_PRODUCT_SUN_EBUS && pci_mapreg_map(&ebus_pa, PCI_EBUS2_BOOTROM, PCI_MAPREG_TYPE_MEM, BUS_SPACE_MAP_CACHEABLE | BUS_SPACE_MAP_PREFETCHABLE, &romt, &romh, 0, &romsize) == 0) { /* read PCI Expansion PROM Header */ bus_space_read_region_1(romt, romh, 0, buf, sizeof buf); if (memcmp(buf, promhdr, sizeof promhdr) == 0 && (dataoff = (buf[PROMHDR_PTR_DATA] | (buf[PROMHDR_PTR_DATA + 1] << 8))) >= 0x1c) { /* read PCI Expansion PROM Data */ bus_space_read_region_1(romt, romh, dataoff, buf, sizeof buf); if (memcmp(buf, promdat, sizeof promdat) == 0 && memcmp(buf + PROMDATA_DATA2, promdat2, sizeof promdat2) == 0 && (vpdoff = (buf[PROMDATA_PTR_VPD] | (buf[PROMDATA_PTR_VPD + 1] << 8))) >= 0x1c) { /* * The VPD of hme is not in PCI 2.2 standard * format. The length in the resource header * is in big endian, and resources are not * properly terminated (only one resource * and no end tag). */ /* read PCI VPD */ bus_space_read_region_1(romt, romh, vpdoff, buf, sizeof buf); vpd = (void *)(buf + 3); if (PCI_VPDRES_ISLARGE(buf[0]) && PCI_VPDRES_LARGE_NAME(buf[0]) == PCI_VPDRES_TYPE_VPD && /* buf[1] == 0 && buf[2] == 9 && */ /*len*/ vpd->vpd_key0 == 0x4e /* N */ && vpd->vpd_key1 == 0x41 /* A */ && vpd->vpd_len == ETHER_ADDR_LEN) { /* * Ethernet address found */ enaddr = buf + 6; } } } bus_space_unmap(romt, romh, romsize); } if (enaddr) memcpy(sc->sc_enaddr, enaddr, ETHER_ADDR_LEN); else #endif /* HME_USE_LOCAL_MAC_ADDRESS */ #ifdef __sparc__ myetheraddr(sc->sc_enaddr); #else printf("%s: no Ethernet address found\n", sc->sc_dev.dv_xname); #endif /* * Map and establish our interrupt. */ if (pci_intr_map(pa, &ih) != 0) { printf("%s: unable to map interrupt\n", sc->sc_dev.dv_xname); return; } intrstr = pci_intr_string(pa->pa_pc, ih); hsc->hsc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, hme_intr, sc); if (hsc->hsc_ih == NULL) { printf("%s: unable to establish interrupt", sc->sc_dev.dv_xname); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return; } printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr); sc->sc_burst = 16; /* XXX */ /* Finish off the attach. */ hme_config(sc); }