/* $NetBSD: zuncompress.c,v 1.4 2004/05/25 04:34:40 mrg Exp $ */ /*- * Copyright (c) 1985, 1986, 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Diomidis Spinellis and James A. Woods, derived from original * work by Spencer Thomas and Joseph Orost. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: NetBSD: zopen.c,v 1.8 2003/08/07 11:13:29 agc Exp */ /* This file is #included by gzip.c */ static int zread(void *, char *, int); #define tab_prefixof(i) (zs->zs_codetab[i]) #define tab_suffixof(i) ((char_type *)(zs->zs_htab))[i] #define de_stack ((char_type *)&tab_suffixof(1 << BITS)) #define BITS 16 /* Default bits. */ #define HSIZE 69001 /* 95% occupancy */ /* XXX may not need HSIZE */ #define BIT_MASK 0x1f /* Defines for third byte of header. */ #define BLOCK_MASK 0x80 #define CHECK_GAP 10000 /* Ratio check interval. */ #define BUFSIZE (64 * 1024) /* * Masks 0x40 and 0x20 are free. I think 0x20 should mean that there is * a fourth header byte (for expansion). */ #define INIT_BITS 9 /* Initial number of bits/code. */ /* * the next two codes should not be changed lightly, as they must not * lie within the contiguous general code space. */ #define FIRST 257 /* First free entry. */ #define CLEAR 256 /* Table clear output code. */ #define MAXCODE(n_bits) ((1 << (n_bits)) - 1) typedef long code_int; typedef long count_int; typedef u_char char_type; static char_type magic_header[] = {'\037', '\235'}; /* 1F 9D */ static char_type rmask[9] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff}; /* XXX zuncompress global */ off_t total_compressed_bytes; size_t compressed_prelen; char *compressed_pre; struct s_zstate { FILE *zs_fp; /* File stream for I/O */ char zs_mode; /* r or w */ enum { S_START, S_MIDDLE, S_EOF } zs_state; /* State of computation */ int zs_n_bits; /* Number of bits/code. */ int zs_maxbits; /* User settable max # bits/code. */ code_int zs_maxcode; /* Maximum code, given n_bits. */ code_int zs_maxmaxcode; /* Should NEVER generate this code. */ count_int zs_htab [HSIZE]; u_short zs_codetab [HSIZE]; code_int zs_hsize; /* For dynamic table sizing. */ code_int zs_free_ent; /* First unused entry. */ /* * Block compression parameters -- after all codes are used up, * and compression rate changes, start over. */ int zs_block_compress; int zs_clear_flg; long zs_ratio; count_int zs_checkpoint; int zs_offset; long zs_in_count; /* Length of input. */ long zs_bytes_out; /* Length of compressed output. */ long zs_out_count; /* # of codes output (for debugging). */ char_type zs_buf[BITS]; union { struct { long zs_fcode; code_int zs_ent; code_int zs_hsize_reg; int zs_hshift; } w; /* Write paramenters */ struct { char_type *zs_stackp; int zs_finchar; code_int zs_code, zs_oldcode, zs_incode; int zs_roffset, zs_size; char_type zs_gbuf[BITS]; } r; /* Read parameters */ } u; }; static code_int getcode(struct s_zstate *zs); static off_t zuncompress(FILE *in, FILE *out, char *pre, size_t prelen, off_t *compressed_bytes) { off_t bin, bout = 0; char buf[BUFSIZE]; /* XXX */ compressed_prelen = prelen; if (prelen != 0) compressed_pre = pre; else compressed_pre = NULL; while ((bin = fread(buf, 1, sizeof(buf), in)) != 0) { if (fwrite(buf, 1, bin, out) != bin) return -1; bout += bin; } if (compressed_bytes) *compressed_bytes = total_compressed_bytes; return bout; } FILE * zopen(const char *fname, FILE *preopen) { struct s_zstate *zs; if ((zs = calloc(1, sizeof(struct s_zstate))) == NULL) return (NULL); zs->zs_state = S_START; /* XXX we can get rid of some of these */ zs->zs_hsize = HSIZE; /* For dynamic table sizing. */ zs->zs_free_ent = 0; /* First unused entry. */ zs->zs_block_compress = BLOCK_MASK; zs->zs_clear_flg = 0; /* XXX we calloc()'d this structure why = 0? */ zs->zs_ratio = 0; zs->zs_checkpoint = CHECK_GAP; zs->zs_in_count = 1; /* Length of input. */ zs->zs_out_count = 0; /* # of codes output (for debugging). */ zs->u.r.zs_roffset = 0; zs->u.r.zs_size = 0; /* * Layering compress on top of stdio in order to provide buffering, * and ensure that reads and write work with the data specified. */ if ((zs->zs_fp = preopen) == NULL && (zs->zs_fp = fopen(fname, "r")) == NULL) { free(zs); return NULL; } return fropen(zs, zread); } /* * Decompress read. This routine adapts to the codes in the file building * the "string" table on-the-fly; requiring no table to be stored in the * compressed file. The tables used herein are shared with those of the * compress() routine. See the definitions above. */ static int zread(void *cookie, char *rbp, int num) { u_int count, i; struct s_zstate *zs; u_char *bp, header[3]; if (num == 0) return (0); zs = cookie; count = num; bp = (u_char *)rbp; switch (zs->zs_state) { case S_START: zs->zs_state = S_MIDDLE; break; case S_MIDDLE: goto middle; case S_EOF: goto eof; } /* Check the magic number */ for (i = 0; i < 3 && compressed_prelen; i++, compressed_prelen--) header[i] = *compressed_pre++; if (fread(header + i, 1, sizeof(header) - i, zs->zs_fp) != sizeof(header) - i || memcmp(header, magic_header, sizeof(magic_header)) != 0) { errno = EFTYPE; return (-1); } total_compressed_bytes = 0; zs->zs_maxbits = header[2]; /* Set -b from file. */ zs->zs_block_compress = zs->zs_maxbits & BLOCK_MASK; zs->zs_maxbits &= BIT_MASK; zs->zs_maxmaxcode = 1L << zs->zs_maxbits; if (zs->zs_maxbits > BITS) { errno = EFTYPE; return (-1); } /* As above, initialize the first 256 entries in the table. */ zs->zs_maxcode = MAXCODE(zs->zs_n_bits = INIT_BITS); for (zs->u.r.zs_code = 255; zs->u.r.zs_code >= 0; zs->u.r.zs_code--) { tab_prefixof(zs->u.r.zs_code) = 0; tab_suffixof(zs->u.r.zs_code) = (char_type) zs->u.r.zs_code; } zs->zs_free_ent = zs->zs_block_compress ? FIRST : 256; zs->u.r.zs_finchar = zs->u.r.zs_oldcode = getcode(zs); if (zs->u.r.zs_oldcode == -1) /* EOF already? */ return (0); /* Get out of here */ /* First code must be 8 bits = char. */ *bp++ = (u_char)zs->u.r.zs_finchar; count--; zs->u.r.zs_stackp = de_stack; while ((zs->u.r.zs_code = getcode(zs)) > -1) { if ((zs->u.r.zs_code == CLEAR) && zs->zs_block_compress) { for (zs->u.r.zs_code = 255; zs->u.r.zs_code >= 0; zs->u.r.zs_code--) tab_prefixof(zs->u.r.zs_code) = 0; zs->zs_clear_flg = 1; zs->zs_free_ent = FIRST - 1; if ((zs->u.r.zs_code = getcode(zs)) == -1) /* O, untimely death! */ break; } zs->u.r.zs_incode = zs->u.r.zs_code; /* Special case for KwKwK string. */ if (zs->u.r.zs_code >= zs->zs_free_ent) { *zs->u.r.zs_stackp++ = zs->u.r.zs_finchar; zs->u.r.zs_code = zs->u.r.zs_oldcode; } /* Generate output characters in reverse order. */ while (zs->u.r.zs_code >= 256) { *zs->u.r.zs_stackp++ = tab_suffixof(zs->u.r.zs_code); zs->u.r.zs_code = tab_prefixof(zs->u.r.zs_code); } *zs->u.r.zs_stackp++ = zs->u.r.zs_finchar = tab_suffixof(zs->u.r.zs_code); /* And put them out in forward order. */ middle: do { if (count-- == 0) return (num); *bp++ = *--zs->u.r.zs_stackp; } while (zs->u.r.zs_stackp > de_stack); /* Generate the new entry. */ if ((zs->u.r.zs_code = zs->zs_free_ent) < zs->zs_maxmaxcode) { tab_prefixof(zs->u.r.zs_code) = (u_short) zs->u.r.zs_oldcode; tab_suffixof(zs->u.r.zs_code) = zs->u.r.zs_finchar; zs->zs_free_ent = zs->u.r.zs_code + 1; } /* Remember previous code. */ zs->u.r.zs_oldcode = zs->u.r.zs_incode; } zs->zs_state = S_EOF; eof: return (num - count); } /*- * Read one code from the standard input. If EOF, return -1. * Inputs: * stdin * Outputs: * code or -1 is returned. */ static code_int getcode(struct s_zstate *zs) { code_int gcode; int r_off, bits, i; char_type *bp; bp = zs->u.r.zs_gbuf; if (zs->zs_clear_flg > 0 || zs->u.r.zs_roffset >= zs->u.r.zs_size || zs->zs_free_ent > zs->zs_maxcode) { /* * If the next entry will be too big for the current gcode * size, then we must increase the size. This implies reading * a new buffer full, too. */ if (zs->zs_free_ent > zs->zs_maxcode) { zs->zs_n_bits++; if (zs->zs_n_bits == zs->zs_maxbits) /* Won't get any bigger now. */ zs->zs_maxcode = zs->zs_maxmaxcode; else zs->zs_maxcode = MAXCODE(zs->zs_n_bits); } if (zs->zs_clear_flg > 0) { zs->zs_maxcode = MAXCODE(zs->zs_n_bits = INIT_BITS); zs->zs_clear_flg = 0; } /* XXX */ for (i = 0; i < zs->zs_n_bits && compressed_prelen; i++, compressed_prelen--) zs->u.r.zs_gbuf[i] = *compressed_pre++; zs->u.r.zs_size = fread(zs->u.r.zs_gbuf + i, 1, zs->zs_n_bits - i, zs->zs_fp); zs->u.r.zs_size += i; if (zs->u.r.zs_size <= 0) /* End of file. */ return (-1); zs->u.r.zs_roffset = 0; total_compressed_bytes += zs->u.r.zs_size; /* Round size down to integral number of codes. */ zs->u.r.zs_size = (zs->u.r.zs_size << 3) - (zs->zs_n_bits - 1); } r_off = zs->u.r.zs_roffset; bits = zs->zs_n_bits; /* Get to the first byte. */ bp += (r_off >> 3); r_off &= 7; /* Get first part (low order bits). */ gcode = (*bp++ >> r_off); bits -= (8 - r_off); r_off = 8 - r_off; /* Now, roffset into gcode word. */ /* Get any 8 bit parts in the middle (<=1 for up to 16 bits). */ if (bits >= 8) { gcode |= *bp++ << r_off; r_off += 8; bits -= 8; } /* High order bits. */ gcode |= (*bp & rmask[bits]) << r_off; zs->u.r.zs_roffset += zs->zs_n_bits; return (gcode); }