#	$NetBSD: JORNADA690,v 1.6 2001/03/08 15:21:31 uch Exp $
#
#	JORNADA690 uch's Jornada 690
#

include "arch/hpcsh/conf/std.hpcsh.el"

maxusers	32			# estimated number of users

options		SH7709A			# 133MHz
options		SH7709A_BROKEN_IPR
options		PCLOCK=22000000		# 22MHz

options 	DDB			# in-kernel debugger
options 	DIAGNOSTIC		# extra kernel debugging checks
options 	DEBUG			# extra kernel debugging support
options 	KTRACE			# system call tracing support
options		MSGBUFSIZE=65534

# Standard system options

options 	RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT
options 	HZ=50		# clock interrupt generates every 1/HZ sec 

# Compatibility options
options 	COMPAT_43

options 	SCSIVERBOSE	# human readable SCSI error messages
options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages

# Executable format options
options 	EXEC_COFF	# 32-bit COFF executables
options 	EXEC_ELF32	# 32-bit ELF executables

# File systems
file-system 	FFS		# UFS
file-system 	MSDOSFS		# MS-DOS file system
file-system 	MFS		# memory file system
file-system	NFS		# Sun NFS-compatible filesystem client
file-system 	UNION		# union file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	PROCFS		# /proc

# File system options

# Networking options
options 	INET		# IP + ICMP + TCP + UDP
options 	NFS_BOOT_DHCP

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?

options 	WSEMUL_VT100
options 	WSDISPLAY_DEFAULTSCREENS=4
options 	FONT_VT220L8x10
options 	WS_KERNEL_FG=WSCOL_BROWN
options 	WS_KERNEL_BG=WSCOL_BLUE
# compatibility to other console drivers
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes

#
# Device configuration
#
mainbus0 at root

shb* at mainbus?

# Workstation Console attachments
bivideo0	at mainbus0
hpcfb*		at bivideo0

wsdisplay*	at hpcfb?
pfckbd*		at mainbus?
hpckbd*		at pfckbd?
wskbd*		at hpckbd? mux 1

# Serial Devices
# don't need to define SCICONSOLE. you can select from bootloader.
options SCIFCN_SPEED=19200
scif0 at shb? port 0xa4000008 irq 12

hd64461if* at shb? irq 4
hd64461pcmcia*	at hd64461if?

# PCMCIA bus support
pcmcia0 at hd64461pcmcia? controller 0 socket ?	# I/O card, memory card
pcmcia1 at hd64461pcmcia? controller 1 socket ? # memory card only

# PCMCIA network interfaces
ne*	at pcmcia0 function ?		# NE2000-compatible Ethernet
ep*	at pcmcia0 function ?		# 3Com 3c589 and 3c562 Ethernet
mbe*	at pcmcia0 function ?		# MB8696x based Ethernet
#wi*	at pcmcia0 function ?		# Lucent WaveLan IEEE (802.11)
#mhzc*	at pcmcia0 function ?		# Megahertz Ethernet/Modem combo cards
#com*	at mhzc?
#sm*	at mhzc?

# PCMCIA SCSI interfaces
#aic*	at pcmcia0 function ?		# Adaptec APA-1460 SCSI

#scsibus* at aic?

# PCMCIA IDE disk
# PC-Card slot
wdc1	at pcmcia0 function ?
wd*	at wdc1 channel ? drive ? flags 0x0000
# Compact Flash slot (only memory mapped mode CF can attach) 
wdc0	at pcmcia1 function ?
wd*	at wdc0 channel ? drive ? flags 0x0000

# SCSI devices
#sd*	at scsibus? target ? lun ?	# SCSI disk drives

# Network Interfaces

# Pseudo-Devices
pseudo-device	biconsdev	1	# build-in console device

# network pseudo-devices
pseudo-device	bpfilter	8	# Berkeley packet filter
pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop			# network loopback

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals

# mouse & keyboard multiplexor pseudo-devices
pseudo-device	wsmux		2