/* $NetBSD: tulip.c,v 1.36 1999/12/15 12:23:32 tsutsui Exp $ */ /*- * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Device driver for the Digital Semiconductor ``Tulip'' (21x4x) * Ethernet controller family, and a variety of clone chips. */ #include "opt_inet.h" #include "opt_ns.h" #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include /* for PAGE_SIZE */ #include #include #include #include #if NBPFILTER > 0 #include #endif #ifdef INET #include #include #endif #ifdef NS #include #include #endif #include #include #include #include #include #include #include /* * The following tables compute the transmit threshold mode. We start * at index 0. When ever we get a transmit underrun, we increment our * index, falling back if we encounter the NULL terminator. * * Note: Store and forward mode is only available on the 100mbps chips * (21140 and higher). */ const struct tulip_txthresh_tab tlp_10_txthresh_tab[] = { { OPMODE_TR_72, "72 bytes" }, { OPMODE_TR_96, "96 bytes" }, { OPMODE_TR_128, "128 bytes" }, { OPMODE_TR_160, "160 bytes" }, { 0, NULL }, }; const struct tulip_txthresh_tab tlp_10_100_txthresh_tab[] = { { OPMODE_TR_72, "72/128 bytes" }, { OPMODE_TR_96, "96/256 bytes" }, { OPMODE_TR_128, "128/512 bytes" }, { OPMODE_TR_160, "160/1024 bytes" }, { OPMODE_SF, "store and forward mode" }, { 0, NULL }, }; #define TXTH_72 0 #define TXTH_96 1 #define TXTH_128 2 #define TXTH_160 3 #define TXTH_SF 4 /* * The Winbond 89C840F does transmit threshold control totally * differently. It simply has a 7-bit field which indicates * the threshold: * * txth = ((OPMODE & OPMODE_WINB_TTH) >> OPMODE_WINB_TTH_SHIFT) * 16; * * However, we just do Store-and-Forward mode on these chips, since * the DMA engines seem to be flaky. */ const struct tulip_txthresh_tab tlp_winb_txthresh_tab[] = { { 0, "store and forward mode" }, { 0, NULL }, }; #define TXTH_WINB_SF 0 void tlp_start __P((struct ifnet *)); void tlp_watchdog __P((struct ifnet *)); int tlp_ioctl __P((struct ifnet *, u_long, caddr_t)); void tlp_shutdown __P((void *)); void tlp_reset __P((struct tulip_softc *)); int tlp_init __P((struct tulip_softc *)); void tlp_rxdrain __P((struct tulip_softc *)); void tlp_stop __P((struct tulip_softc *, int)); int tlp_add_rxbuf __P((struct tulip_softc *, int)); void tlp_idle __P((struct tulip_softc *, u_int32_t)); void tlp_srom_idle __P((struct tulip_softc *)); void tlp_filter_setup __P((struct tulip_softc *)); void tlp_winb_filter_setup __P((struct tulip_softc *)); void tlp_al981_filter_setup __P((struct tulip_softc *)); void tlp_rxintr __P((struct tulip_softc *)); void tlp_txintr __P((struct tulip_softc *)); void tlp_mii_tick __P((void *)); void tlp_mii_statchg __P((struct device *)); void tlp_winb_mii_statchg __P((struct device *)); void tlp_mii_getmedia __P((struct tulip_softc *, struct ifmediareq *)); int tlp_mii_setmedia __P((struct tulip_softc *)); int tlp_bitbang_mii_readreg __P((struct device *, int, int)); void tlp_bitbang_mii_writereg __P((struct device *, int, int, int)); int tlp_pnic_mii_readreg __P((struct device *, int, int)); void tlp_pnic_mii_writereg __P((struct device *, int, int, int)); int tlp_al981_mii_readreg __P((struct device *, int, int)); void tlp_al981_mii_writereg __P((struct device *, int, int, int)); void tlp_2114x_preinit __P((struct tulip_softc *)); void tlp_2114x_mii_preinit __P((struct tulip_softc *)); void tlp_pnic_preinit __P((struct tulip_softc *)); void tlp_21140_reset __P((struct tulip_softc *)); void tlp_21142_reset __P((struct tulip_softc *)); void tlp_pmac_reset __P((struct tulip_softc *)); u_int32_t tlp_crc32 __P((const u_int8_t *, size_t)); #define tlp_mchash(addr, sz) (tlp_crc32((addr), ETHER_ADDR_LEN) & ((sz) - 1)) /* * MII bit-bang glue. */ u_int32_t tlp_sio_mii_bitbang_read __P((struct device *)); void tlp_sio_mii_bitbang_write __P((struct device *, u_int32_t)); const struct mii_bitbang_ops tlp_sio_mii_bitbang_ops = { tlp_sio_mii_bitbang_read, tlp_sio_mii_bitbang_write, { MIIROM_MDO, /* MII_BIT_MDO */ MIIROM_MDI, /* MII_BIT_MDI */ MIIROM_MDC, /* MII_BIT_MDC */ 0, /* MII_BIT_DIR_HOST_PHY */ MIIROM_MIIDIR, /* MII_BIT_DIR_PHY_HOST */ } }; #ifdef TLP_DEBUG #define DPRINTF(sc, x) if ((sc)->sc_ethercom.ec_if.if_flags & IFF_DEBUG) \ printf x #else #define DPRINTF(sc, x) /* nothing */ #endif #ifdef TLP_STATS void tlp_print_stats __P((struct tulip_softc *)); #endif /* * tlp_attach: * * Attach a Tulip interface to the system. */ void tlp_attach(sc, enaddr) struct tulip_softc *sc; const u_int8_t *enaddr; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; int i, rseg, error; bus_dma_segment_t seg; /* * NOTE: WE EXPECT THE FRONT-END TO INITIALIZE sc_regshift! */ /* * Setup the transmit threshold table. */ switch (sc->sc_chip) { case TULIP_CHIP_DE425: case TULIP_CHIP_21040: case TULIP_CHIP_21041: sc->sc_txth = tlp_10_txthresh_tab; break; default: sc->sc_txth = tlp_10_100_txthresh_tab; break; } /* * Setup the filter setup function. */ switch (sc->sc_chip) { case TULIP_CHIP_WB89C840F: sc->sc_filter_setup = tlp_winb_filter_setup; break; case TULIP_CHIP_AL981: sc->sc_filter_setup = tlp_al981_filter_setup; break; default: sc->sc_filter_setup = tlp_filter_setup; break; } /* * Set up the media status change function. */ switch (sc->sc_chip) { case TULIP_CHIP_WB89C840F: sc->sc_statchg = tlp_winb_mii_statchg; break; default: /* * We may override this if we have special media * handling requirements (e.g. flipping GPIO pins). * * The pure-MII statchg function covers the basics. */ sc->sc_statchg = tlp_mii_statchg; break; } /* * Set up various chip-specific quirks. */ switch (sc->sc_chip) { case TULIP_CHIP_21140: case TULIP_CHIP_21140A: case TULIP_CHIP_21142: case TULIP_CHIP_21143: case TULIP_CHIP_82C115: /* 21143-like */ case TULIP_CHIP_MX98713: /* 21140-like */ case TULIP_CHIP_MX98713A: /* 21143-like */ case TULIP_CHIP_MX98715: /* 21143-like */ case TULIP_CHIP_MX98715A: /* 21143-like */ case TULIP_CHIP_MX98725: /* 21143-like */ sc->sc_preinit = tlp_2114x_preinit; break; case TULIP_CHIP_82C168: case TULIP_CHIP_82C169: sc->sc_preinit = tlp_pnic_preinit; /* * These chips seem to have busted DMA engines; just put them * in Store-and-Forward mode from the get-go. */ sc->sc_txthresh = TXTH_SF; break; case TULIP_CHIP_WB89C840F: sc->sc_flags |= TULIPF_IC_FS; break; default: /* Nothing. */ } /* * Set up the MII bit-bang operations. */ switch (sc->sc_chip) { case TULIP_CHIP_WB89C840F: /* XXX direction bit different? */ sc->sc_bitbang_ops = &tlp_sio_mii_bitbang_ops; break; default: sc->sc_bitbang_ops = &tlp_sio_mii_bitbang_ops; } SIMPLEQ_INIT(&sc->sc_txfreeq); SIMPLEQ_INIT(&sc->sc_txdirtyq); /* * Allocate the control data structures, and create and load the * DMA map for it. */ if ((error = bus_dmamem_alloc(sc->sc_dmat, sizeof(struct tulip_control_data), PAGE_SIZE, 0, &seg, 1, &rseg, 0)) != 0) { printf("%s: unable to allocate control data, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_0; } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, sizeof(struct tulip_control_data), (caddr_t *)&sc->sc_control_data, BUS_DMA_COHERENT)) != 0) { printf("%s: unable to map control data, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_1; } if ((error = bus_dmamap_create(sc->sc_dmat, sizeof(struct tulip_control_data), 1, sizeof(struct tulip_control_data), 0, 0, &sc->sc_cddmamap)) != 0) { printf("%s: unable to create control data DMA map, " "error = %d\n", sc->sc_dev.dv_xname, error); goto fail_2; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, sc->sc_control_data, sizeof(struct tulip_control_data), NULL, 0)) != 0) { printf("%s: unable to load control data DMA map, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_3; } /* * Create the transmit buffer DMA maps. */ for (i = 0; i < TULIP_TXQUEUELEN; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, TULIP_NTXSEGS, MCLBYTES, 0, 0, &sc->sc_txsoft[i].txs_dmamap)) != 0) { printf("%s: unable to create tx DMA map %d, " "error = %d\n", sc->sc_dev.dv_xname, i, error); goto fail_4; } } /* * Create the recieve buffer DMA maps. */ for (i = 0; i < TULIP_NRXDESC; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) { printf("%s: unable to create rx DMA map %d, " "error = %d\n", sc->sc_dev.dv_xname, i, error); goto fail_5; } sc->sc_rxsoft[i].rxs_mbuf = NULL; } /* * Reset the chip to a known state. */ tlp_reset(sc); /* Announce ourselves. */ printf("%s: %s%sEthernet address %s\n", sc->sc_dev.dv_xname, sc->sc_name[0] != '\0' ? sc->sc_name : "", sc->sc_name[0] != '\0' ? ", " : "", ether_sprintf(enaddr)); /* * Initialize our media structures. This may probe the MII, if * present. */ (*sc->sc_mediasw->tmsw_init)(sc); ifp = &sc->sc_ethercom.ec_if; strcpy(ifp->if_xname, sc->sc_dev.dv_xname); ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = tlp_ioctl; ifp->if_start = tlp_start; ifp->if_watchdog = tlp_watchdog; /* * Attach the interface. */ if_attach(ifp); ether_ifattach(ifp, enaddr); #if NBPFILTER > 0 bpfattach(&sc->sc_ethercom.ec_if.if_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif /* * Make sure the interface is shutdown during reboot. */ sc->sc_sdhook = shutdownhook_establish(tlp_shutdown, sc); if (sc->sc_sdhook == NULL) printf("%s: WARNING: unable to establish shutdown hook\n", sc->sc_dev.dv_xname); return; /* * Free any resources we've allocated during the failed attach * attempt. Do this in reverse order and fall through. */ fail_5: for (i = 0; i < TULIP_NRXDESC; i++) { if (sc->sc_rxsoft[i].rxs_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxsoft[i].rxs_dmamap); } fail_4: for (i = 0; i < TULIP_TXQUEUELEN; i++) { if (sc->sc_txsoft[i].txs_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_txsoft[i].txs_dmamap); } bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); fail_3: bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); fail_2: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data, sizeof(struct tulip_control_data)); fail_1: bus_dmamem_free(sc->sc_dmat, &seg, rseg); fail_0: return; } /* * tlp_shutdown: * * Make sure the interface is stopped at reboot time. */ void tlp_shutdown(arg) void *arg; { struct tulip_softc *sc = arg; tlp_stop(sc, 1); } /* * tlp_start: [ifnet interface function] * * Start packet transmission on the interface. */ void tlp_start(ifp) struct ifnet *ifp; { struct tulip_softc *sc = ifp->if_softc; struct mbuf *m0, *m; struct tulip_txsoft *txs, *last_txs; bus_dmamap_t dmamap; int error, firsttx, nexttx, lasttx, ofree, seg; DPRINTF(sc, ("%s: tlp_start: sc_flags 0x%08x, if_flags 0x%08x\n", sc->sc_dev.dv_xname, sc->sc_flags, ifp->if_flags)); /* * If we want a filter setup, it means no more descriptors were * available for the setup routine. Let it get a chance to wedge * itself into the ring. */ if (sc->sc_flags & TULIPF_WANT_SETUP) ifp->if_flags |= IFF_OACTIVE; if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) return; /* * Remember the previous number of free descriptors and * the first descriptor we'll use. */ ofree = sc->sc_txfree; firsttx = sc->sc_txnext; DPRINTF(sc, ("%s: tlp_start: txfree %d, txnext %d\n", sc->sc_dev.dv_xname, ofree, firsttx)); /* * Loop through the send queue, setting up transmit descriptors * until we drain the queue, or use up all available transmit * descriptors. */ while ((txs = SIMPLEQ_FIRST(&sc->sc_txfreeq)) != NULL && sc->sc_txfree != 0) { /* * Grab a packet off the queue. */ IF_DEQUEUE(&ifp->if_snd, m0); if (m0 == NULL) break; dmamap = txs->txs_dmamap; /* * Load the DMA map. If this fails, the packet either * didn't fit in the alloted number of segments, or we were * short on resources. In this case, we'll copy and try * again. */ if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, BUS_DMA_NOWAIT) != 0) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { printf("%s: unable to allocate Tx mbuf\n", sc->sc_dev.dv_xname); IF_PREPEND(&ifp->if_snd, m0); break; } if (m0->m_pkthdr.len > MHLEN) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { printf("%s: unable to allocate Tx " "cluster\n", sc->sc_dev.dv_xname); m_freem(m); IF_PREPEND(&ifp->if_snd, m0); break; } } m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t)); m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; m_freem(m0); m0 = m; error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, BUS_DMA_NOWAIT); if (error) { printf("%s: unable to load Tx buffer, " "error = %d\n", sc->sc_dev.dv_xname, error); IF_PREPEND(&ifp->if_snd, m0); break; } } /* * Ensure we have enough descriptors free to describe * the packet. */ if (dmamap->dm_nsegs > sc->sc_txfree) { /* * Not enough free descriptors to transmit this * packet. We haven't committed to anything yet, * so just unload the DMA map, put the packet * back on the queue, and punt. Notify the upper * layer that there are no more slots left. * * XXX We could allocate an mbuf and copy, but * XXX it is worth it? */ ifp->if_flags |= IFF_OACTIVE; bus_dmamap_unload(sc->sc_dmat, dmamap); IF_PREPEND(&ifp->if_snd, m0); break; } /* * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. */ /* Sync the DMA map. */ bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE); /* * Initialize the transmit descriptors. */ for (nexttx = sc->sc_txnext, seg = 0; seg < dmamap->dm_nsegs; seg++, nexttx = TULIP_NEXTTX(nexttx)) { /* * If this is the first descriptor we're * enqueueing, don't set the OWN bit just * yet. That could cause a race condition. * We'll do it below. */ sc->sc_txdescs[nexttx].td_status = (nexttx == firsttx) ? 0 : htole32(TDSTAT_OWN); sc->sc_txdescs[nexttx].td_bufaddr1 = htole32(dmamap->dm_segs[seg].ds_addr); sc->sc_txdescs[nexttx].td_ctl = htole32((dmamap->dm_segs[seg].ds_len << TDCTL_SIZE1_SHIFT) | TDCTL_CH); lasttx = nexttx; } /* Set `first segment' and `last segment' appropriately. */ sc->sc_txdescs[sc->sc_txnext].td_ctl |= htole32(TDCTL_Tx_FS); sc->sc_txdescs[lasttx].td_ctl |= htole32(TDCTL_Tx_LS); #ifdef TLP_DEBUG if (ifp->if_flags & IFF_DEBUG) { printf(" txsoft %p trainsmit chain:\n", txs); for (seg = sc->sc_txnext;; seg = TULIP_NEXTTX(seg)) { printf(" descriptor %d:\n", seg); printf(" td_status: 0x%08x\n", le32toh(sc->sc_txdescs[seg].td_status)); printf(" td_ctl: 0x%08x\n", le32toh(sc->sc_txdescs[seg].td_ctl)); printf(" td_bufaddr1: 0x%08x\n", le32toh(sc->sc_txdescs[seg].td_bufaddr1)); printf(" td_bufaddr2: 0x%08x\n", le32toh(sc->sc_txdescs[seg].td_bufaddr2)); if (seg == lasttx) break; } } #endif /* Sync the descriptors we're using. */ TULIP_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* * Store a pointer to the packet so we can free it later, * and remember what txdirty will be once the packet is * done. */ txs->txs_mbuf = m0; txs->txs_firstdesc = sc->sc_txnext; txs->txs_lastdesc = lasttx; /* Advance the tx pointer. */ sc->sc_txfree -= dmamap->dm_nsegs; sc->sc_txnext = nexttx; SIMPLEQ_REMOVE_HEAD(&sc->sc_txfreeq, txs, txs_q); SIMPLEQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q); last_txs = txs; #if NBPFILTER > 0 /* * Pass the packet to any BPF listeners. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m0); #endif /* NBPFILTER > 0 */ } if (txs == NULL || sc->sc_txfree == 0) { /* No more slots left; notify upper layer. */ ifp->if_flags |= IFF_OACTIVE; } if (sc->sc_txfree != ofree) { DPRINTF(sc, ("%s: packets enqueued, IC on %d, OWN on %d\n", sc->sc_dev.dv_xname, lasttx, firsttx)); /* * Cause a transmit interrupt to happen on the * last packet we enqueued. */ sc->sc_txdescs[lasttx].td_ctl |= htole32(TDCTL_Tx_IC); TULIP_CDTXSYNC(sc, lasttx, 1, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* * Some clone chips want IC on the *first* segment in * the packet. Appease them. */ if ((sc->sc_flags & TULIPF_IC_FS) != 0 && last_txs->txs_firstdesc != lasttx) { sc->sc_txdescs[last_txs->txs_firstdesc].td_ctl |= htole32(TDCTL_Tx_IC); TULIP_CDTXSYNC(sc, last_txs->txs_firstdesc, 1, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); } /* * The entire packet chain is set up. Give the * first descriptor to the chip now. */ sc->sc_txdescs[firsttx].td_status |= htole32(TDSTAT_OWN); TULIP_CDTXSYNC(sc, firsttx, 1, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* Wake up the transmitter. */ /* XXX USE AUTOPOLLING? */ TULIP_WRITE(sc, CSR_TXPOLL, TXPOLL_TPD); /* Set a watchdog timer in case the chip flakes out. */ ifp->if_timer = 5; } } /* * tlp_watchdog: [ifnet interface function] * * Watchdog timer handler. */ void tlp_watchdog(ifp) struct ifnet *ifp; { struct tulip_softc *sc = ifp->if_softc; int doing_setup, doing_transmit; doing_setup = (sc->sc_flags & TULIPF_DOING_SETUP); doing_transmit = (SIMPLEQ_FIRST(&sc->sc_txdirtyq) != NULL); if (doing_setup && doing_transmit) { printf("%s: filter setup and transmit timeout\n", sc->sc_dev.dv_xname); ifp->if_oerrors++; } else if (doing_transmit) { printf("%s: transmit timeout\n", sc->sc_dev.dv_xname); ifp->if_oerrors++; } else if (doing_setup) printf("%s: filter setup timeout\n", sc->sc_dev.dv_xname); else printf("%s: spurious watchdog timeout\n", sc->sc_dev.dv_xname); (void) tlp_init(sc); /* Try to get more packets going. */ tlp_start(ifp); } /* * tlp_ioctl: [ifnet interface function] * * Handle control requests from the operator. */ int tlp_ioctl(ifp, cmd, data) struct ifnet *ifp; u_long cmd; caddr_t data; { struct tulip_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *)data; struct ifaddr *ifa = (struct ifaddr *)data; int s, error = 0; s = splnet(); switch (cmd) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: if ((error = tlp_init(sc)) != 0) break; arp_ifinit(ifp, ifa); break; #endif /* INET */ #ifdef NS case AF_NS: { struct ns_addr *ina = &IA_SNS(ifa)->sns_addr; if (ns_nullhost(*ina)) ina->x_host = *(union ns_host *) LLADDR(ifp->if_sadl); else bcopy(ina->x_host.c_host, LLADDR(ifp->if_sadl), ifp->if_addrlen); /* Set new address. */ error = tlp_init(sc); break; } #endif /* NS */ default: error = tlp_init(sc); break; } break; case SIOCSIFMTU: if (ifr->ifr_mtu > ETHERMTU) error = EINVAL; else ifp->if_mtu = ifr->ifr_mtu; break; case SIOCSIFFLAGS: #ifdef TLP_STATS if (ifp->if_flags & IFF_DEBUG) tlp_print_stats(sc); #endif if ((ifp->if_flags & IFF_UP) == 0 && (ifp->if_flags & IFF_RUNNING) != 0) { /* * If interface is marked down and it is running, then * stop it. */ tlp_stop(sc, 1); } else if ((ifp->if_flags & IFF_UP) != 0 && (ifp->if_flags & IFF_RUNNING) == 0) { /* * If interfase it marked up and it is stopped, then * start it. */ error = tlp_init(sc); } else if ((ifp->if_flags & IFF_UP) != 0) { /* * Reset the interface to pick up changes in any other * flags that affect the hardware state. */ error = tlp_init(sc); } break; case SIOCADDMULTI: case SIOCDELMULTI: error = (cmd == SIOCADDMULTI) ? ether_addmulti(ifr, &sc->sc_ethercom) : ether_delmulti(ifr, &sc->sc_ethercom); if (error == ENETRESET) { /* * Multicast list has changed. Set the filter * accordingly. */ (*sc->sc_filter_setup)(sc); error = 0; } break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); break; default: error = EINVAL; break; } /* Try to get more packets going. */ tlp_start(ifp); splx(s); return (error); } /* * tlp_intr: * * Interrupt service routine. */ int tlp_intr(arg) void *arg; { struct tulip_softc *sc = arg; struct ifnet *ifp = &sc->sc_ethercom.ec_if; u_int32_t status, rxstatus, txstatus; int handled = 0, txthresh; DPRINTF(sc, ("%s: tlp_intr\n", sc->sc_dev.dv_xname)); /* * If the interface isn't running, the interrupt couldn't * possibly have come from us. */ if ((ifp->if_flags & IFF_RUNNING) == 0) return (0); for (;;) { status = TULIP_READ(sc, CSR_STATUS); if (status) TULIP_WRITE(sc, CSR_STATUS, status); if ((status & sc->sc_inten) == 0) break; handled = 1; rxstatus = status & sc->sc_rxint_mask; txstatus = status & sc->sc_txint_mask; if (rxstatus) { /* Grab new any new packets. */ tlp_rxintr(sc); if (rxstatus & STATUS_RWT) printf("%s: receive watchdog timeout\n", sc->sc_dev.dv_xname); if (rxstatus & STATUS_RU) { printf("%s: receive ring overrun\n", sc->sc_dev.dv_xname); /* Get the receive process going again. */ tlp_idle(sc, OPMODE_SR); TULIP_WRITE(sc, CSR_RXLIST, TULIP_CDRXADDR(sc, sc->sc_rxptr)); TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); TULIP_WRITE(sc, CSR_RXPOLL, RXPOLL_RPD); break; } } if (txstatus) { /* Sweep up transmit descriptors. */ tlp_txintr(sc); if (txstatus & STATUS_TJT) printf("%s: transmit jabber timeout\n", sc->sc_dev.dv_xname); if (txstatus & STATUS_UNF) { /* * Increase our transmit threshold if * another is available. */ txthresh = sc->sc_txthresh + 1; if (sc->sc_txth[txthresh].txth_name != NULL) { /* Idle the transmit process. */ tlp_idle(sc, OPMODE_ST); sc->sc_txthresh = txthresh; sc->sc_opmode &= ~(OPMODE_TR|OPMODE_SF); sc->sc_opmode |= sc->sc_txth[txthresh].txth_opmode; printf("%s: transmit underrun; new " "threshold: %s\n", sc->sc_dev.dv_xname, sc->sc_txth[txthresh].txth_name); /* * Set the new threshold and restart * the transmit process. */ TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); } /* * XXX Log every Nth underrun from * XXX now on? */ } } if (status & (STATUS_TPS|STATUS_RPS)) { if (status & STATUS_TPS) printf("%s: transmit process stopped\n", sc->sc_dev.dv_xname); if (status & STATUS_RPS) printf("%s: receive process stopped\n", sc->sc_dev.dv_xname); (void) tlp_init(sc); break; } if (status & STATUS_SE) { const char *str; switch (status & STATUS_EB) { case STATUS_EB_PARITY: str = "parity error"; break; case STATUS_EB_MABT: str = "master abort"; break; case STATUS_EB_TABT: str = "target abort"; break; default: str = "unknown error"; break; } printf("%s: fatal system error: %s\n", sc->sc_dev.dv_xname, str); (void) tlp_init(sc); break; } /* * Not handled: * * Transmit buffer unavailable -- normal * condition, nothing to do, really. * * General purpose timer experied -- we don't * use the general purpose timer. * * Early receive interrupt -- not available on * all chips, we just use RI. We also only * use single-segment receive DMA, so this * is mostly useless. */ } /* Try to get more packets going. */ tlp_start(ifp); return (handled); } /* * tlp_rxintr: * * Helper; handle receive interrupts. */ void tlp_rxintr(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ether_header *eh; struct tulip_rxsoft *rxs; struct mbuf *m; u_int32_t rxstat; int i, len; for (i = sc->sc_rxptr;; i = TULIP_NEXTRX(i)) { rxs = &sc->sc_rxsoft[i]; TULIP_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); rxstat = le32toh(sc->sc_rxdescs[i].td_status); if (rxstat & TDSTAT_OWN) { /* * We have processed all of the receive buffers. */ break; } /* * Make sure the packet fit in one buffer. This should * always be the case. But the Lite-On PNIC, rev 33 * has an awful receive engine bug, which may require * a very icky work-around. */ if ((rxstat & (TDSTAT_Rx_FS|TDSTAT_Rx_LS)) != (TDSTAT_Rx_FS|TDSTAT_Rx_LS)) { printf("%s: incoming packet spilled, resetting\n", sc->sc_dev.dv_xname); (void) tlp_init(sc); return; } /* * If any collisions were seen on the wire, count one. */ if (rxstat & TDSTAT_Rx_CS) ifp->if_collisions++; /* * If an error occured, update stats, clear the status * word, and leave the packet buffer in place. It will * simply be reused the next time the ring comes around. */ if (rxstat & TDSTAT_ES) { #define PRINTERR(bit, str) \ if (rxstat & (bit)) \ printf("%s: receive error: %s\n", \ sc->sc_dev.dv_xname, str) ifp->if_ierrors++; PRINTERR(TDSTAT_Rx_DE, "descriptor error"); PRINTERR(TDSTAT_Rx_RF, "runt frame"); PRINTERR(TDSTAT_Rx_TL, "frame too long"); PRINTERR(TDSTAT_Rx_RE, "MII error"); PRINTERR(TDSTAT_Rx_DB, "dribbling bit"); PRINTERR(TDSTAT_Rx_CE, "CRC error"); #undef PRINTERR TULIP_INIT_RXDESC(sc, i); continue; } bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); /* * No errors; receive the packet. Note the Tulip * includes the CRC with every packet; trim it. */ len = TDSTAT_Rx_LENGTH(rxstat) - ETHER_CRC_LEN; #ifdef __NO_STRICT_ALIGNMENT /* * Allocate a new mbuf cluster. If that fails, we are * out of memory, and must drop the packet and recycle * the buffer that's already attached to this descriptor. */ m = rxs->rxs_mbuf; if (tlp_add_rxbuf(sc, i) != 0) { ifp->if_ierrors++; TULIP_INIT_RXDESC(sc, i); bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); continue; } #else /* * The Tulip's receive buffers must be 4-byte aligned. * But this means that the data after the Ethernet header * is misaligned. We must allocate a new buffer and * copy the data, shifted forward 2 bytes. */ MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) { dropit: ifp->if_ierrors++; TULIP_INIT_RXDESC(sc, i); bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); continue; } if (len > (MHLEN - 2)) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); goto dropit; } } m->m_data += 2; /* * Note that we use clusters for incoming frames, so the * buffer is virtually contiguous. */ memcpy(mtod(m, caddr_t), mtod(rxs->rxs_mbuf, caddr_t), len); /* Allow the receive descriptor to continue using its mbuf. */ TULIP_INIT_RXDESC(sc, i); bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); #endif /* __NO_STRICT_ALIGNMENT */ ifp->if_ipackets++; eh = mtod(m, struct ether_header *); m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = len; #if NBPFILTER > 0 /* * Pass this up to any BPF listeners, but only * pass it up the stack if its for us. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m); #endif /* NPBFILTER > 0 */ /* * This test is outside the NBPFILTER block because * on the 21140 we have to use Hash-Only mode due to * a bug in the filter logic. */ if ((ifp->if_flags & IFF_PROMISC) != 0 || sc->sc_filtmode == TDCTL_Tx_FT_HASHONLY) { if (memcmp(LLADDR(ifp->if_sadl), eh->ether_dhost, ETHER_ADDR_LEN) != 0 && ETHER_IS_MULTICAST(eh->ether_dhost) == 0) { m_freem(m); continue; } } /* Pass it on. */ (*ifp->if_input)(ifp, m); } /* Update the recieve pointer. */ sc->sc_rxptr = i; } /* * tlp_txintr: * * Helper; handle transmit interrupts. */ void tlp_txintr(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct tulip_txsoft *txs; u_int32_t txstat; DPRINTF(sc, ("%s: tlp_txintr: sc_flags 0x%08x\n", sc->sc_dev.dv_xname, sc->sc_flags)); ifp->if_flags &= ~IFF_OACTIVE; /* * If we were doing a filter setup, check to see if it completed. */ if (sc->sc_flags & TULIPF_DOING_SETUP) { TULIP_CDSDSYNC(sc, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); if ((sc->sc_setup_desc.td_status & htole32(TDSTAT_OWN)) == 0) sc->sc_flags &= ~TULIPF_DOING_SETUP; } /* * Go through our Tx list and free mbufs for those * frames that have been transmitted. */ while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) { TULIP_CDTXSYNC(sc, txs->txs_lastdesc, txs->txs_dmamap->dm_nsegs, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); #ifdef TLP_DEBUG if (ifp->if_flags & IFF_DEBUG) { int i; printf(" txsoft %p trainsmit chain:\n", txs); for (i = txs->txs_firstdesc;; i = TULIP_NEXTTX(i)) { printf(" descriptor %d:\n", i); printf(" td_status: 0x%08x\n", le32toh(sc->sc_txdescs[i].td_status)); printf(" td_ctl: 0x%08x\n", le32toh(sc->sc_txdescs[i].td_ctl)); printf(" td_bufaddr1: 0x%08x\n", le32toh(sc->sc_txdescs[i].td_bufaddr1)); printf(" td_bufaddr2: 0x%08x\n", le32toh(sc->sc_txdescs[i].td_bufaddr2)); if (i == txs->txs_lastdesc) break; } } #endif txstat = le32toh(sc->sc_txdescs[txs->txs_lastdesc].td_status); if (txstat & TDSTAT_OWN) break; SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs, txs_q); sc->sc_txfree += txs->txs_dmamap->dm_nsegs; bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); m_freem(txs->txs_mbuf); txs->txs_mbuf = NULL; SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); /* * Check for errors and collisions. */ #ifdef TLP_STATS if (txstat & TDSTAT_Tx_UF) sc->sc_stats.ts_tx_uf++; if (txstat & TDSTAT_Tx_TO) sc->sc_stats.ts_tx_to++; if (txstat & TDSTAT_Tx_EC) sc->sc_stats.ts_tx_ec++; if (txstat & TDSTAT_Tx_LC) sc->sc_stats.ts_tx_lc++; #endif if (txstat & (TDSTAT_Tx_UF|TDSTAT_Tx_TO)) ifp->if_oerrors++; if (txstat & TDSTAT_Tx_EC) ifp->if_collisions += 16; else ifp->if_collisions += TDSTAT_Tx_COLLISIONS(txstat); if (txstat & TDSTAT_Tx_LC) ifp->if_collisions++; ifp->if_opackets++; } /* * If there are no more pending transmissions, cancel the watchdog * timer. */ if (txs == NULL && (sc->sc_flags & TULIPF_DOING_SETUP) == 0) ifp->if_timer = 0; /* * If we have a receive filter setup pending, do it now. */ if (sc->sc_flags & TULIPF_WANT_SETUP) (*sc->sc_filter_setup)(sc); } #ifdef TLP_STATS void tlp_print_stats(sc) struct tulip_softc *sc; { printf("%s: tx_uf %lu, tx_to %lu, tx_ec %lu, tx_lc %lu\n", sc->sc_dev.dv_xname, sc->sc_stats.ts_tx_uf, sc->sc_stats.ts_tx_to, sc->sc_stats.ts_tx_ec, sc->sc_stats.ts_tx_lc); } #endif /* * tlp_reset: * * Perform a soft reset on the Tulip. */ void tlp_reset(sc) struct tulip_softc *sc; { int i; TULIP_WRITE(sc, CSR_BUSMODE, BUSMODE_SWR); for (i = 0; i < 1000; i++) { /* * Wait at least 50 PCI cycles for the reset to * complete before peeking at the Tulip again. * 10 uSec is a bit longer than 50 PCI cycles * (at 33MHz), but it doesn't hurt have the extra * wait. */ delay(10); if (TULIP_ISSET(sc, CSR_BUSMODE, BUSMODE_SWR) == 0) break; } if (TULIP_ISSET(sc, CSR_BUSMODE, BUSMODE_SWR)) printf("%s: reset failed to complete\n", sc->sc_dev.dv_xname); delay(1000); /* * If the board has any GPIO reset sequences to issue, do them now. */ if (sc->sc_reset != NULL) (*sc->sc_reset)(sc); } /* * tlp_init: * * Initialize the interface. Must be called at splnet(). */ int tlp_init(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct tulip_txsoft *txs; struct tulip_rxsoft *rxs; int i, error = 0; /* * Cancel any pending I/O. */ tlp_stop(sc, 0); /* * Initialize `opmode' to 0, and call the pre-init routine, if * any. This is required because the 2114x and some of the * clones require that the media-related bits in `opmode' be * set before performing a soft-reset in order to get internal * chip pathways are correct. Yay! */ sc->sc_opmode = 0; if (sc->sc_preinit != NULL) (*sc->sc_preinit)(sc); /* * Reset the Tulip to a known state. */ tlp_reset(sc); /* * Initialize the BUSMODE register. */ sc->sc_busmode = BUSMODE_BAR; switch (sc->sc_chip) { case TULIP_CHIP_21140: case TULIP_CHIP_21140A: case TULIP_CHIP_21142: case TULIP_CHIP_21143: case TULIP_CHIP_82C115: case TULIP_CHIP_MX98725: /* * If we're allowed to do so, use Memory Read Line * and Memory Read Multiple. * * XXX Should we use Memory Write and Invalidate? */ if (sc->sc_flags & TULIPF_MRL) sc->sc_busmode |= BUSMODE_RLE; if (sc->sc_flags & TULIPF_MRM) sc->sc_busmode |= BUSMODE_RME; #if 0 if (sc->sc_flags & TULIPF_MWI) sc->sc_busmode |= BUSMODE_WLE; #endif default: /* Nothing. */ } switch (sc->sc_cacheline) { default: /* * Note: We must *always* set these bits; a cache * alignment of 0 is RESERVED. */ case 8: sc->sc_busmode |= BUSMODE_CAL_8LW; break; case 16: sc->sc_busmode |= BUSMODE_CAL_16LW; break; case 32: sc->sc_busmode |= BUSMODE_CAL_32LW; break; } switch (sc->sc_chip) { case TULIP_CHIP_82C168: case TULIP_CHIP_82C169: sc->sc_busmode |= BUSMODE_PBL_16LW | BUSMODE_PNIC_MBO; break; default: sc->sc_busmode |= BUSMODE_PBL_DEFAULT; break; } #if BYTE_ORDER == BIG_ENDIAN /* * Can't use BUSMODE_BLE or BUSMODE_DBO; not all chips * support them, and even on ones that do, it doesn't * always work. */ #endif TULIP_WRITE(sc, CSR_BUSMODE, sc->sc_busmode); /* * Initialize the OPMODE register. We don't write it until * we're ready to begin the transmit and receive processes. * * Media-related OPMODE bits are set in the media callbacks * for each specific chip/board. */ sc->sc_opmode |= OPMODE_SR | OPMODE_ST | sc->sc_txth[sc->sc_txthresh].txth_opmode; /* * Magical mystery initialization on the Macronix chips. * The MX98713 uses its own magic value, the rest share * a common one. */ switch (sc->sc_chip) { case TULIP_CHIP_MX98713: TULIP_WRITE(sc, CSR_PMAC_TOR, PMAC_TOR_98713); break; case TULIP_CHIP_MX98713A: case TULIP_CHIP_MX98715: case TULIP_CHIP_MX98715A: case TULIP_CHIP_MX98725: TULIP_WRITE(sc, CSR_PMAC_TOR, PMAC_TOR_98715); break; default: /* Nothing. */ } /* * Initialize the transmit descriptor ring. */ memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs)); for (i = 0; i < TULIP_NTXDESC; i++) { sc->sc_txdescs[i].td_ctl = htole32(TDCTL_CH); sc->sc_txdescs[i].td_bufaddr2 = htole32(TULIP_CDTXADDR(sc, TULIP_NEXTTX(i))); } TULIP_CDTXSYNC(sc, 0, TULIP_NTXDESC, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); sc->sc_txfree = TULIP_NTXDESC; sc->sc_txnext = 0; /* * Initialize the transmit job descriptors. */ SIMPLEQ_INIT(&sc->sc_txfreeq); SIMPLEQ_INIT(&sc->sc_txdirtyq); for (i = 0; i < TULIP_TXQUEUELEN; i++) { txs = &sc->sc_txsoft[i]; txs->txs_mbuf = NULL; SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); } /* * Initialize the receive descriptor and receive job * descriptor rings. */ for (i = 0; i < TULIP_NRXDESC; i++) { rxs = &sc->sc_rxsoft[i]; if (rxs->rxs_mbuf == NULL) { if ((error = tlp_add_rxbuf(sc, i)) != 0) { printf("%s: unable to allocate or map rx " "buffer %d, error = %d\n", sc->sc_dev.dv_xname, i, error); /* * XXX Should attempt to run with fewer receive * XXX buffers instead of just failing. */ tlp_rxdrain(sc); goto out; } } } sc->sc_rxptr = 0; /* * Initialize the interrupt mask and enable interrupts. */ /* normal interrupts */ sc->sc_inten = STATUS_TI | STATUS_TU | STATUS_RI | STATUS_NIS; /* abnormal interrupts */ sc->sc_inten |= STATUS_TPS | STATUS_TJT | STATUS_UNF | STATUS_RU | STATUS_RPS | STATUS_RWT | STATUS_SE | STATUS_AIS; sc->sc_rxint_mask = STATUS_RI|STATUS_RU|STATUS_RWT; sc->sc_txint_mask = STATUS_TI|STATUS_UNF|STATUS_TJT; switch (sc->sc_chip) { case TULIP_CHIP_WB89C840F: /* * Clear bits that we don't want that happen to * overlap or don't exist. */ sc->sc_inten &= ~(STATUS_WINB_REI|STATUS_RWT); break; default: /* Nothing. */ } sc->sc_rxint_mask &= sc->sc_inten; sc->sc_txint_mask &= sc->sc_inten; TULIP_WRITE(sc, CSR_INTEN, sc->sc_inten); TULIP_WRITE(sc, CSR_STATUS, 0xffffffff); /* * Give the transmit and receive rings to the Tulip. */ TULIP_WRITE(sc, CSR_TXLIST, TULIP_CDTXADDR(sc, sc->sc_txnext)); TULIP_WRITE(sc, CSR_RXLIST, TULIP_CDRXADDR(sc, sc->sc_rxptr)); /* * On chips that do this differently, set the station address. */ switch (sc->sc_chip) { case TULIP_CHIP_WB89C840F: { /* XXX Do this with stream writes? */ bus_addr_t cpa = TULIP_CSR_OFFSET(sc, CSR_WINB_CPA0); for (i = 0; i < ETHER_ADDR_LEN; i++) { bus_space_write_1(sc->sc_st, sc->sc_sh, cpa + i, LLADDR(ifp->if_sadl)[i]); } break; } case TULIP_CHIP_AL981: { u_int32_t reg; u_int8_t *enaddr = LLADDR(ifp->if_sadl); reg = enaddr[0] | (enaddr[1] << 8) | (enaddr[2] << 16) | (enaddr[3] << 24); bus_space_write_4(sc->sc_st, sc->sc_sh, CSR_ADM_PAR0, reg); reg = enaddr[4] | (enaddr[5] << 8); bus_space_write_4(sc->sc_st, sc->sc_sh, CSR_ADM_PAR1, reg); } default: /* Nothing. */ } /* * Set the receive filter. This will start the transmit and * receive processes. */ (*sc->sc_filter_setup)(sc); /* * Set the current media. */ (void) (*sc->sc_mediasw->tmsw_set)(sc); /* * Start the receive process. */ TULIP_WRITE(sc, CSR_RXPOLL, RXPOLL_RPD); if (sc->sc_tick != NULL) { /* Start the one second clock. */ timeout(sc->sc_tick, sc, hz); } /* * Note that the interface is now running. */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; out: if (error) printf("%s: interface not running\n", sc->sc_dev.dv_xname); return (error); } /* * tlp_rxdrain: * * Drain the receive queue. */ void tlp_rxdrain(sc) struct tulip_softc *sc; { struct tulip_rxsoft *rxs; int i; for (i = 0; i < TULIP_NRXDESC; i++) { rxs = &sc->sc_rxsoft[i]; if (rxs->rxs_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); m_freem(rxs->rxs_mbuf); rxs->rxs_mbuf = NULL; } } } /* * tlp_stop: * * Stop transmission on the interface. */ void tlp_stop(sc, drain) struct tulip_softc *sc; int drain; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct tulip_txsoft *txs; if (sc->sc_tick != NULL) { /* Stop the one second clock. */ untimeout(sc->sc_tick, sc); } if (sc->sc_flags & TULIPF_HAS_MII) { /* Down the MII. */ mii_down(&sc->sc_mii); } /* Disable interrupts. */ TULIP_WRITE(sc, CSR_INTEN, 0); /* Stop the transmit and receive processes. */ TULIP_WRITE(sc, CSR_OPMODE, 0); TULIP_WRITE(sc, CSR_RXLIST, 0); TULIP_WRITE(sc, CSR_TXLIST, 0); /* * Release any queued transmit buffers. */ while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) { SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs, txs_q); if (txs->txs_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); m_freem(txs->txs_mbuf); txs->txs_mbuf = NULL; } SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); } if (drain) { /* * Release the receive buffers. */ tlp_rxdrain(sc); } sc->sc_flags &= ~(TULIPF_WANT_SETUP|TULIPF_DOING_SETUP); /* * Mark the interface down and cancel the watchdog timer. */ ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; } #define SROM_EMIT(sc, x) \ do { \ TULIP_WRITE((sc), CSR_MIIROM, (x)); \ delay(1); \ } while (0) /* * tlp_srom_idle: * * Put the SROM in idle state. */ void tlp_srom_idle(sc) struct tulip_softc *sc; { u_int32_t miirom; int i; miirom = MIIROM_SR; SROM_EMIT(sc, miirom); miirom |= MIIROM_RD; SROM_EMIT(sc, miirom); miirom |= MIIROM_SROMCS; SROM_EMIT(sc, miirom); SROM_EMIT(sc, miirom|MIIROM_SROMSK); /* Strobe the clock 25 times. */ for (i = 0; i < 25; i++) { SROM_EMIT(sc, miirom); SROM_EMIT(sc, miirom|MIIROM_SROMSK); } SROM_EMIT(sc, miirom); miirom &= ~MIIROM_SROMCS; SROM_EMIT(sc, miirom); SROM_EMIT(sc, 0); } /* * tlp_read_srom: * * Read the Tulip SROM. */ void tlp_read_srom(sc, word, wordcnt, data) struct tulip_softc *sc; int word, wordcnt; u_int8_t *data; { u_int32_t miirom; u_int16_t datain; int i, x; tlp_srom_idle(sc); /* Select the SROM. */ miirom = MIIROM_SR; SROM_EMIT(sc, miirom); miirom |= MIIROM_RD; SROM_EMIT(sc, miirom); for (i = 0; i < wordcnt; i++) { /* Send CHIP SELECT for one clock tick. */ miirom |= MIIROM_SROMCS; SROM_EMIT(sc, miirom); /* Shift in the READ opcode. */ for (x = 3; x > 0; x--) { if (TULIP_SROM_OPC_READ & (1 << (x - 1))) miirom |= MIIROM_SROMDI; else miirom &= ~MIIROM_SROMDI; SROM_EMIT(sc, miirom); SROM_EMIT(sc, miirom|MIIROM_SROMSK); SROM_EMIT(sc, miirom); } /* Shift in address. */ for (x = sc->sc_srom_addrbits; x > 0; x--) { if ((word + i) & (1 << (x - 1))) miirom |= MIIROM_SROMDI; else miirom &= ~MIIROM_SROMDI; SROM_EMIT(sc, miirom); SROM_EMIT(sc, miirom|MIIROM_SROMSK); SROM_EMIT(sc, miirom); } /* Shift out data. */ miirom &= ~MIIROM_SROMDI; datain = 0; for (x = 16; x > 0; x--) { SROM_EMIT(sc, miirom|MIIROM_SROMSK); if (TULIP_ISSET(sc, CSR_MIIROM, MIIROM_SROMDO)) datain |= (1 << (x - 1)); SROM_EMIT(sc, miirom); } data[2 * i] = datain & 0xff; data[(2 * i) + 1] = datain >> 8; /* Clear CHIP SELECT. */ miirom &= ~MIIROM_SROMCS; SROM_EMIT(sc, miirom); } /* Deselect the SROM. */ SROM_EMIT(sc, 0); /* ...and idle it. */ tlp_srom_idle(sc); } #undef SROM_EMIT /* * tlp_add_rxbuf: * * Add a receive buffer to the indicated descriptor. */ int tlp_add_rxbuf(sc, idx) struct tulip_softc *sc; int idx; { struct tulip_rxsoft *rxs = &sc->sc_rxsoft[idx]; struct mbuf *m; int error; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return (ENOBUFS); MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); return (ENOBUFS); } if (rxs->rxs_mbuf != NULL) bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); rxs->rxs_mbuf = m; error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap, m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT); if (error) { printf("%s: can't load rx DMA map %d, error = %d\n", sc->sc_dev.dv_xname, idx, error); panic("tlp_add_rxbuf"); /* XXX */ } bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); TULIP_INIT_RXDESC(sc, idx); return (0); } /* * tlp_crc32: * * Compute the 32-bit CRC of the provided buffer. */ u_int32_t tlp_crc32(buf, len) const u_int8_t *buf; size_t len; { static const u_int32_t crctab[] = { 0x00000000, 0x1db71064, 0x3b6e20c8, 0x26d930ac, 0x76dc4190, 0x6b6b51f4, 0x4db26158, 0x5005713c, 0xedb88320, 0xf00f9344, 0xd6d6a3e8, 0xcb61b38c, 0x9b64c2b0, 0x86d3d2d4, 0xa00ae278, 0xbdbdf21c }; u_int32_t crc; int i; crc = 0xffffffff; for (i = 0; i < len; i++) { crc ^= buf[i]; crc = (crc >> 4) ^ crctab[crc & 0xf]; crc = (crc >> 4) ^ crctab[crc & 0xf]; } return (crc); } /* * tlp_srom_crcok: * * Check the CRC of the Tulip SROM. */ int tlp_srom_crcok(romdata) const u_int8_t *romdata; { u_int32_t crc; crc = tlp_crc32(romdata, TULIP_ROM_CRC32_CHECKSUM); crc = (crc & 0xffff) ^ 0xffff; if (crc == TULIP_ROM_GETW(romdata, TULIP_ROM_CRC32_CHECKSUM)) return (1); /* * Try an alternate checksum. */ crc = tlp_crc32(romdata, TULIP_ROM_CRC32_CHECKSUM1); crc = (crc & 0xffff) ^ 0xffff; if (crc == TULIP_ROM_GETW(romdata, TULIP_ROM_CRC32_CHECKSUM1)) return (1); return (0); } /* * tlp_isv_srom: * * Check to see if the SROM is in the new standardized format. */ int tlp_isv_srom(romdata) const u_int8_t *romdata; { int i; u_int16_t cksum; if (tlp_srom_crcok(romdata)) { /* * SROM CRC checks out; must be in the new format. */ return (1); } cksum = TULIP_ROM_GETW(romdata, TULIP_ROM_CRC32_CHECKSUM); if (cksum == 0xffff || cksum == 0) { /* * No checksum present. Check the SROM ID; 18 bytes of 0 * followed by 1 (version) followed by the number of * adapters which use this SROM (should be non-zero). */ for (i = 0; i < TULIP_ROM_SROM_FORMAT_VERION; i++) { if (romdata[i] != 0) return (0); } if (romdata[TULIP_ROM_SROM_FORMAT_VERION] != 1) return (0); if (romdata[TULIP_ROM_CHIP_COUNT] == 0) return (0); return (1); } return (0); } /* * tlp_isv_srom_enaddr: * * Get the Ethernet address from an ISV SROM. */ int tlp_isv_srom_enaddr(sc, enaddr) struct tulip_softc *sc; u_int8_t *enaddr; { int i, devcnt; if (tlp_isv_srom(sc->sc_srom) == 0) return (0); devcnt = sc->sc_srom[TULIP_ROM_CHIP_COUNT]; for (i = 0; i < devcnt; i++) { if (sc->sc_srom[TULIP_ROM_CHIP_COUNT] == 1) break; if (sc->sc_srom[TULIP_ROM_CHIPn_DEVICE_NUMBER(i)] == sc->sc_devno) break; } if (i == devcnt) return (0); memcpy(enaddr, &sc->sc_srom[TULIP_ROM_IEEE_NETWORK_ADDRESS], ETHER_ADDR_LEN); enaddr[5] += i; return (1); } /* * tlp_parse_old_srom: * * Parse old-format SROMs. * * This routine is largely lifted from Matt Thomas's `de' driver. */ int tlp_parse_old_srom(sc, enaddr) struct tulip_softc *sc; u_int8_t *enaddr; { static const u_int8_t testpat[] = { 0xff, 0, 0x55, 0xaa, 0xff, 0, 0x55, 0xaa }; int i; u_int32_t cksum; if (memcmp(&sc->sc_srom[0], &sc->sc_srom[16], 8) != 0) { /* * Some vendors (e.g. ZNYX) don't use the standard * DEC Address ROM format, but rather just have an * Ethernet address in the first 6 bytes, maybe a * 2 byte checksum, and then all 0xff's. */ for (i = 8; i < 32; i++) { if (sc->sc_srom[i] != 0xff) return (0); } /* * Sanity check the Ethernet address: * * - Make sure it's not multicast or locally * assigned * - Make sure it has a non-0 OUI */ if (sc->sc_srom[0] & 3) return (0); if (sc->sc_srom[0] == 0 && sc->sc_srom[1] == 0 && sc->sc_srom[2] == 0) return (0); memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN); return (1); } /* * Standard DEC Address ROM test. */ if (memcmp(&sc->sc_srom[24], testpat, 8) != 0) return (0); for (i = 0; i < 8; i++) { if (sc->sc_srom[i] != sc->sc_srom[15 - i]) return (0); } memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN); cksum = *(u_int16_t *) &enaddr[0]; cksum <<= 1; if (cksum > 0xffff) cksum -= 0xffff; cksum += *(u_int16_t *) &enaddr[2]; if (cksum > 0xffff) cksum -= 0xffff; cksum <<= 1; if (cksum > 0xffff) cksum -= 0xffff; cksum += *(u_int16_t *) &enaddr[4]; if (cksum >= 0xffff) cksum -= 0xffff; if (cksum != *(u_int16_t *) &sc->sc_srom[6]) return (0); return (1); } /* * tlp_filter_setup: * * Set the Tulip's receive filter. */ void tlp_filter_setup(sc) struct tulip_softc *sc; { struct ethercom *ec = &sc->sc_ethercom; struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ether_multi *enm; struct ether_multistep step; __volatile u_int32_t *sp; u_int8_t enaddr[ETHER_ADDR_LEN]; u_int32_t hash, hashsize; int cnt; DPRINTF(sc, ("%s: tlp_filter_setup: sc_flags 0x%08x\n", sc->sc_dev.dv_xname, sc->sc_flags)); memcpy(enaddr, LLADDR(ifp->if_sadl), ETHER_ADDR_LEN); /* * If there are transmissions pending, wait until they have * completed. */ if (SIMPLEQ_FIRST(&sc->sc_txdirtyq) != NULL || (sc->sc_flags & TULIPF_DOING_SETUP) != 0) { sc->sc_flags |= TULIPF_WANT_SETUP; DPRINTF(sc, ("%s: tlp_filter_setup: deferring\n", sc->sc_dev.dv_xname)); return; } sc->sc_flags &= ~TULIPF_WANT_SETUP; switch (sc->sc_chip) { case TULIP_CHIP_82C115: hashsize = TULIP_PNICII_HASHSIZE; break; default: hashsize = TULIP_MCHASHSIZE; } /* * If we're running, idle the transmit and receive engines. If * we're NOT running, we're being called from tlp_init(), and our * writing OPMODE will start the transmit and receive processes * in motion. */ if (ifp->if_flags & IFF_RUNNING) { /* * Actually, some chips seem to need a really hard * kick in the head for this to work. The genuine * DEC chips can just be idled, but some of the * clones seem to REALLY want a reset here. Doing * the reset will end up here again, but with * IFF_RUNNING cleared. */ switch (sc->sc_chip) { case TULIP_CHIP_82C168: case TULIP_CHIP_82C169: tlp_init(sc); return; default: tlp_idle(sc, OPMODE_ST|OPMODE_SR); } } sc->sc_opmode &= ~(OPMODE_PR|OPMODE_PM); if (ifp->if_flags & IFF_PROMISC) { sc->sc_opmode |= OPMODE_PR; goto allmulti; } /* * Try Perfect filtering first. */ sc->sc_filtmode = TDCTL_Tx_FT_PERFECT; sp = TULIP_CDSP(sc); memset(TULIP_CDSP(sc), 0, TULIP_SETUP_PACKET_LEN); cnt = 0; ETHER_FIRST_MULTI(step, ec, enm); while (enm != NULL) { if (bcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { /* * We must listen to a range of multicast addresses. * For now, just accept all multicasts, rather than * trying to set only those filter bits needed to match * the range. (At this time, the only use of address * ranges is for IP multicast routing, for which the * range is big enough to require all bits set.) */ goto allmulti; } if (cnt == (TULIP_MAXADDRS - 2)) { /* * We already have our multicast limit (still need * our station address and broadcast). Go to * Hash-Perfect mode. */ goto hashperfect; } *sp++ = TULIP_SP_FIELD(enm->enm_addrlo, 0); *sp++ = TULIP_SP_FIELD(enm->enm_addrlo, 1); *sp++ = TULIP_SP_FIELD(enm->enm_addrlo, 2); ETHER_NEXT_MULTI(step, enm); } if (ifp->if_flags & IFF_BROADCAST) { /* ...and the broadcast address. */ cnt++; *sp++ = TULIP_SP_FIELD_C(0xffff); *sp++ = TULIP_SP_FIELD_C(0xffff); *sp++ = TULIP_SP_FIELD_C(0xffff); } /* Pad the rest with our station address. */ for (; cnt < TULIP_MAXADDRS; cnt++) { *sp++ = TULIP_SP_FIELD(enaddr, 0); *sp++ = TULIP_SP_FIELD(enaddr, 1); *sp++ = TULIP_SP_FIELD(enaddr, 2); } ifp->if_flags &= ~IFF_ALLMULTI; goto setit; hashperfect: /* * Try Hash-Perfect mode. */ /* * Some 21140 chips have broken Hash-Perfect modes. On these * chips, we simply use Hash-Only mode, and put our station * address into the filter. */ if (sc->sc_chip == TULIP_CHIP_21140) sc->sc_filtmode = TDCTL_Tx_FT_HASHONLY; else sc->sc_filtmode = TDCTL_Tx_FT_HASH; sp = TULIP_CDSP(sc); memset(TULIP_CDSP(sc), 0, TULIP_SETUP_PACKET_LEN); ETHER_FIRST_MULTI(step, ec, enm); while (enm != NULL) { if (bcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { /* * We must listen to a range of multicast addresses. * For now, just accept all multicasts, rather than * trying to set only those filter bits needed to match * the range. (At this time, the only use of address * ranges is for IP multicast routing, for which the * range is big enough to require all bits set.) */ goto allmulti; } hash = tlp_mchash(enm->enm_addrlo, hashsize); sp[hash >> 4] |= htole32(1 << (hash & 0xf)); ETHER_NEXT_MULTI(step, enm); } if (ifp->if_flags & IFF_BROADCAST) { /* ...and the broadcast address. */ hash = tlp_mchash(etherbroadcastaddr, hashsize); sp[hash >> 4] |= htole32(1 << (hash & 0xf)); } if (sc->sc_filtmode == TDCTL_Tx_FT_HASHONLY) { /* ...and our station address. */ hash = tlp_mchash(enaddr, hashsize); sp[hash >> 4] |= htole32(1 << (hash & 0xf)); } else { /* * Hash-Perfect mode; put our station address after * the hash table. */ sp[39] = TULIP_SP_FIELD(enaddr, 0); sp[40] = TULIP_SP_FIELD(enaddr, 1); sp[41] = TULIP_SP_FIELD(enaddr, 2); } ifp->if_flags &= ~IFF_ALLMULTI; goto setit; allmulti: /* * Use Perfect filter mode. First address is the broadcast address, * and pad the rest with our station address. We'll set Pass-all- * multicast in OPMODE below. */ sc->sc_filtmode = TDCTL_Tx_FT_PERFECT; sp = TULIP_CDSP(sc); memset(TULIP_CDSP(sc), 0, TULIP_SETUP_PACKET_LEN); cnt = 0; if (ifp->if_flags & IFF_BROADCAST) { cnt++; *sp++ = TULIP_SP_FIELD_C(0xffff); *sp++ = TULIP_SP_FIELD_C(0xffff); *sp++ = TULIP_SP_FIELD_C(0xffff); } for (; cnt < TULIP_MAXADDRS; cnt++) { *sp++ = TULIP_SP_FIELD(enaddr, 0); *sp++ = TULIP_SP_FIELD(enaddr, 1); *sp++ = TULIP_SP_FIELD(enaddr, 2); } ifp->if_flags |= IFF_ALLMULTI; setit: if (ifp->if_flags & IFF_ALLMULTI) sc->sc_opmode |= OPMODE_PM; /* Sync the setup packet buffer. */ TULIP_CDSPSYNC(sc, BUS_DMASYNC_PREWRITE); /* * Fill in the setup packet descriptor. */ sc->sc_setup_desc.td_bufaddr1 = htole32(TULIP_CDSPADDR(sc)); sc->sc_setup_desc.td_bufaddr2 = htole32(TULIP_CDTXADDR(sc, sc->sc_txnext)); sc->sc_setup_desc.td_ctl = htole32((TULIP_SETUP_PACKET_LEN << TDCTL_SIZE1_SHIFT) | sc->sc_filtmode | TDCTL_Tx_SET | TDCTL_Tx_FS | TDCTL_Tx_LS | TDCTL_Tx_IC | TDCTL_CH); sc->sc_setup_desc.td_status = htole32(TDSTAT_OWN); TULIP_CDSDSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* * Write the address of the setup descriptor. This also has * the side effect of giving the transmit ring to the chip, * since the setup descriptor points to the next available * descriptor in the ring. */ TULIP_WRITE(sc, CSR_TXLIST, TULIP_CDSDADDR(sc)); /* * Set the OPMODE register. This will also resume the * transmit transmit process we idled above. */ TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); sc->sc_flags |= TULIPF_DOING_SETUP; /* * Kick the transmitter; this will cause the Tulip to * read the setup descriptor. */ /* XXX USE AUTOPOLLING? */ TULIP_WRITE(sc, CSR_TXPOLL, TXPOLL_TPD); /* Set up a watchdog timer in case the chip flakes out. */ ifp->if_timer = 5; DPRINTF(sc, ("%s: tlp_filter_setup: returning\n", sc->sc_dev.dv_xname)); } /* * tlp_winb_filter_setup: * * Set the Winbond 89C840F's receive filter. */ void tlp_winb_filter_setup(sc) struct tulip_softc *sc; { struct ethercom *ec = &sc->sc_ethercom; struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ether_multi *enm; struct ether_multistep step; u_int32_t hash, mchash[2]; DPRINTF(sc, ("%s: tlp_winb_filter_setup: sc_flags 0x%08x\n", sc->sc_dev.dv_xname, sc->sc_flags)); sc->sc_opmode &= ~(OPMODE_WINB_APP|OPMODE_WINB_AMP|OPMODE_WINB_ABP); if (ifp->if_flags & IFF_MULTICAST) sc->sc_opmode |= OPMODE_WINB_AMP; if (ifp->if_flags & IFF_BROADCAST) sc->sc_opmode |= OPMODE_WINB_ABP; if (ifp->if_flags & IFF_PROMISC) { sc->sc_opmode |= OPMODE_WINB_APP; goto allmulti; } mchash[0] = mchash[1] = 0; ETHER_FIRST_MULTI(step, ec, enm); while (enm != NULL) { if (bcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { /* * We must listen to a range of multicast addresses. * For now, just accept all multicasts, rather than * trying to set only those filter bits needed to match * the range. (At this time, the only use of address * ranges is for IP multicast routing, for which the * range is big enough to require all bits set.) */ goto allmulti; } /* * According to the FreeBSD `wb' driver, yes, you * really do invert the hash. */ hash = (~(tlp_crc32(enm->enm_addrlo, ETHER_ADDR_LEN) >> 26)) & 0x3f; mchash[hash >> 5] |= 1 << (hash & 0x1f); ETHER_NEXT_MULTI(step, enm); } ifp->if_flags &= ~IFF_ALLMULTI; goto setit; allmulti: ifp->if_flags |= IFF_ALLMULTI; mchash[0] = mchash[1] = 0xffffffff; setit: TULIP_WRITE(sc, CSR_WINB_CMA0, mchash[0]); TULIP_WRITE(sc, CSR_WINB_CMA1, mchash[1]); TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); DPRINTF(sc, ("%s: tlp_winb_filter_setup: returning\n", sc->sc_dev.dv_xname)); } /* * tlp_al981_filter_setup: * * Set the ADMtek AL981's receive filter. */ void tlp_al981_filter_setup(sc) struct tulip_softc *sc; { struct ethercom *ec = &sc->sc_ethercom; struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ether_multi *enm; struct ether_multistep step; u_int32_t hash, mchash[2]; DPRINTF(sc, ("%s: tlp_al981_filter_setup: sc_flags 0x%08x\n", sc->sc_dev.dv_xname, sc->sc_flags)); tlp_idle(sc, OPMODE_ST|OPMODE_SR); sc->sc_opmode &= ~(OPMODE_PR|OPMODE_PM); if (ifp->if_flags & IFF_PROMISC) { sc->sc_opmode |= OPMODE_PR; goto allmulti; } mchash[0] = mchash[1] = 0; ETHER_FIRST_MULTI(step, ec, enm); while (enm != NULL) { if (bcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { /* * We must listen to a range of multicast addresses. * For now, just accept all multicasts, rather than * trying to set only those filter bits needed to match * the range. (At this time, the only use of address * ranges is for IP multicast routing, for which the * range is big enough to require all bits set.) */ goto allmulti; } hash = (tlp_crc32(enm->enm_addrlo, ETHER_ADDR_LEN) >> 26) & 0x3f; mchash[hash >> 5] |= 1 << (hash & 0x1f); ETHER_NEXT_MULTI(step, enm); } ifp->if_flags &= ~IFF_ALLMULTI; goto setit; allmulti: ifp->if_flags |= IFF_ALLMULTI; mchash[0] = mchash[1] = 0xffffffff; setit: TULIP_WRITE(sc, CSR_ADM_MAR0, mchash[0]); TULIP_WRITE(sc, CSR_ADM_MAR1, mchash[1]); TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); DPRINTF(sc, ("%s: tlp_al981_filter_setup: returning\n", sc->sc_dev.dv_xname)); } /* * tlp_idle: * * Cause the transmit and/or receive processes to go idle. */ void tlp_idle(sc, bits) struct tulip_softc *sc; u_int32_t bits; { static const char *tx_state_names[] = { "STOPPED", "RUNNING - FETCH", "RUNNING - WAIT", "RUNNING - READING", "-- RESERVED --", "RUNNING - SETUP", "SUSPENDED", "RUNNING - CLOSE", }; static const char *rx_state_names[] = { "STOPPED", "RUNNING - FETCH", "RUNNING - CHECK", "RUNNING - WAIT", "SUSPENDED", "RUNNING - CLOSE", "RUNNING - FLUSH", "RUNNING - QUEUE", }; u_int32_t csr, ackmask = 0; int i; if (bits & OPMODE_ST) ackmask |= STATUS_TPS; if (bits & OPMODE_SR) ackmask |= STATUS_RPS; TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode & ~bits); for (i = 0; i < 1000; i++) { if (TULIP_ISSET(sc, CSR_STATUS, ackmask) == ackmask) break; delay(10); } csr = TULIP_READ(sc, CSR_STATUS); if ((csr & ackmask) != ackmask) { if ((bits & OPMODE_ST) != 0 && (csr & STATUS_TPS) == 0 && (csr & STATUS_TS) != STATUS_TS_STOPPED) printf("%s: transmit process failed to idle: " "state %s\n", sc->sc_dev.dv_xname, tx_state_names[(csr & STATUS_TS) >> 20]); if ((bits & OPMODE_SR) != 0 && (csr & STATUS_RPS) == 0 && (csr & STATUS_RS) != STATUS_RS_STOPPED) printf("%s: receive process failed to idle: " "state %s\n", sc->sc_dev.dv_xname, rx_state_names[(csr & STATUS_RS) >> 17]); } TULIP_WRITE(sc, CSR_STATUS, ackmask); } /***************************************************************************** * Generic media support functions. *****************************************************************************/ /* * tlp_mediastatus: [ifmedia interface function] * * Query the current media. */ void tlp_mediastatus(ifp, ifmr) struct ifnet *ifp; struct ifmediareq *ifmr; { struct tulip_softc *sc = ifp->if_softc; (*sc->sc_mediasw->tmsw_get)(sc, ifmr); } /* * tlp_mediachange: [ifmedia interface function] * * Update the current media. */ int tlp_mediachange(ifp) struct ifnet *ifp; { struct tulip_softc *sc = ifp->if_softc; return ((*sc->sc_mediasw->tmsw_set)(sc)); } /***************************************************************************** * Support functions for MII-attached media. *****************************************************************************/ /* * tlp_mii_tick: * * One second timer, used to tick the MII. */ void tlp_mii_tick(arg) void *arg; { struct tulip_softc *sc = arg; int s; s = splnet(); mii_tick(&sc->sc_mii); splx(s); timeout(sc->sc_tick, sc, hz); } /* * tlp_mii_statchg: [mii interface function] * * Callback from PHY when media changes. */ void tlp_mii_statchg(self) struct device *self; { struct tulip_softc *sc = (struct tulip_softc *)self; /* Idle the transmit and receive processes. */ tlp_idle(sc, OPMODE_ST|OPMODE_SR); sc->sc_opmode &= ~(OPMODE_TTM|OPMODE_FD|OPMODE_HBD); if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_10_T) sc->sc_opmode |= OPMODE_TTM; else sc->sc_opmode |= OPMODE_HBD; if (sc->sc_mii.mii_media_active & IFM_FDX) sc->sc_opmode |= OPMODE_FD|OPMODE_HBD; /* * Write new OPMODE bits. This also restarts the transmit * and receive processes. */ TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); /* XXX Update ifp->if_baudrate */ } /* * tlp_winb_mii_statchg: [mii interface function] * * Callback from PHY when media changes. This version is * for the Winbond 89C840F, which has different OPMODE bits. */ void tlp_winb_mii_statchg(self) struct device *self; { struct tulip_softc *sc = (struct tulip_softc *)self; /* Idle the transmit and receive processes. */ tlp_idle(sc, OPMODE_ST|OPMODE_SR); sc->sc_opmode &= ~(OPMODE_WINB_FES|OPMODE_FD); if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_100_TX) sc->sc_opmode |= OPMODE_WINB_FES; if (sc->sc_mii.mii_media_active & IFM_FDX) sc->sc_opmode |= OPMODE_FD; /* * Write new OPMODE bits. This also restarts the transmit * and receive processes. */ TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); /* XXX Update ifp->if_baudrate */ } /* * tlp_mii_getmedia: * * Callback from ifmedia to request current media status. */ void tlp_mii_getmedia(sc, ifmr) struct tulip_softc *sc; struct ifmediareq *ifmr; { mii_pollstat(&sc->sc_mii); ifmr->ifm_status = sc->sc_mii.mii_media_status; ifmr->ifm_active = sc->sc_mii.mii_media_active; } /* * tlp_mii_setmedia: * * Callback from ifmedia to request new media setting. */ int tlp_mii_setmedia(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; if (ifp->if_flags & IFF_UP) mii_mediachg(&sc->sc_mii); return (0); } /* * tlp_bitbang_mii_readreg: * * Read a PHY register via bit-bang'ing the MII. */ int tlp_bitbang_mii_readreg(self, phy, reg) struct device *self; int phy, reg; { struct tulip_softc *sc = (void *) self; return (mii_bitbang_readreg(self, sc->sc_bitbang_ops, phy, reg)); } /* * tlp_bitbang_mii_writereg: * * Write a PHY register via bit-bang'ing the MII. */ void tlp_bitbang_mii_writereg(self, phy, reg, val) struct device *self; int phy, reg, val; { struct tulip_softc *sc = (void *) self; mii_bitbang_writereg(self, sc->sc_bitbang_ops, phy, reg, val); } /* * tlp_sio_mii_bitbang_read: * * Read the MII serial port for the MII bit-bang module. */ u_int32_t tlp_sio_mii_bitbang_read(self) struct device *self; { struct tulip_softc *sc = (void *) self; return (TULIP_READ(sc, CSR_MIIROM)); } /* * tlp_sio_mii_bitbang_write: * * Write the MII serial port for the MII bit-bang module. */ void tlp_sio_mii_bitbang_write(self, val) struct device *self; u_int32_t val; { struct tulip_softc *sc = (void *) self; TULIP_WRITE(sc, CSR_MIIROM, val); } /* * tlp_pnic_mii_readreg: * * Read a PHY register on the Lite-On PNIC. */ int tlp_pnic_mii_readreg(self, phy, reg) struct device *self; int phy, reg; { struct tulip_softc *sc = (void *) self; u_int32_t val; int i; TULIP_WRITE(sc, CSR_PNIC_MII, PNIC_MII_MBO | PNIC_MII_RESERVED | PNIC_MII_READ | (phy << PNIC_MII_PHYSHIFT) | (reg << PNIC_MII_REGSHIFT)); for (i = 0; i < 1000; i++) { delay(10); val = TULIP_READ(sc, CSR_PNIC_MII); if ((val & PNIC_MII_BUSY) == 0) { if ((val & PNIC_MII_DATA) == PNIC_MII_DATA) return (0); else return (val & PNIC_MII_DATA); } } printf("%s: MII read timed out\n", sc->sc_dev.dv_xname); return (0); } /* * tlp_pnic_mii_writereg: * * Write a PHY register on the Lite-On PNIC. */ void tlp_pnic_mii_writereg(self, phy, reg, val) struct device *self; int phy, reg, val; { struct tulip_softc *sc = (void *) self; int i; TULIP_WRITE(sc, CSR_PNIC_MII, PNIC_MII_MBO | PNIC_MII_RESERVED | PNIC_MII_WRITE | (phy << PNIC_MII_PHYSHIFT) | (reg << PNIC_MII_REGSHIFT) | val); for (i = 0; i < 1000; i++) { delay(10); if (TULIP_ISSET(sc, CSR_PNIC_MII, PNIC_MII_BUSY) == 0) return; } printf("%s: MII write timed out\n", sc->sc_dev.dv_xname); } const bus_addr_t tlp_al981_phy_regmap[] = { CSR_ADM_BMCR, CSR_ADM_BMSR, CSR_ADM_PHYIDR1, CSR_ADM_PHYIDR2, CSR_ADM_ANAR, CSR_ADM_ANLPAR, CSR_ADM_ANER, CSR_ADM_XMC, CSR_ADM_XCIIS, CSR_ADM_XIE, CSR_ADM_100CTR, }; const int tlp_al981_phy_regmap_size = sizeof(tlp_al981_phy_regmap) / sizeof(tlp_al981_phy_regmap[0]); /* * tlp_al981_mii_readreg: * * Read a PHY register on the ADMtek AL981. */ int tlp_al981_mii_readreg(self, phy, reg) struct device *self; int phy, reg; { struct tulip_softc *sc = (struct tulip_softc *)self; /* AL981 only has an internal PHY. */ if (phy != 0) return (0); if (reg >= tlp_al981_phy_regmap_size) return (0); return (bus_space_read_4(sc->sc_st, sc->sc_sh, tlp_al981_phy_regmap[reg]) & 0xffff); } /* * tlp_al981_mii_writereg: * * Write a PHY register on the ADMtek AL981. */ void tlp_al981_mii_writereg(self, phy, reg, val) struct device *self; int phy, reg, val; { struct tulip_softc *sc = (struct tulip_softc *)self; /* AL981 only has an internal PHY. */ if (phy != 0) return; if (reg >= tlp_al981_phy_regmap_size) return; bus_space_write_4(sc->sc_st, sc->sc_sh, tlp_al981_phy_regmap[reg], val); } /***************************************************************************** * Chip-specific pre-init and reset functions. *****************************************************************************/ /* * tlp_2114x_preinit: * * Pre-init function shared by DECchip 21140, 21140A, 21142, and 21143. */ void tlp_2114x_preinit(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; struct tulip_21x4x_media *tm = ife->ifm_aux; /* * Whether or not we're in MII or SIA/SYM mode, the media info * contains the appropriate OPMODE bits. * * Note that if we have no media info, we are are doing * non-MII `auto'. * * Also, we always set the Must-Be-One bit. */ if (tm == NULL) { #ifdef DIAGNOSTIC if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) panic("tlp_2114x_preinit: not IFM_AUTO"); if (sc->sc_nway_active == NULL) panic("tlp_2114x_preinit: nway_active NULL"); #endif tm = sc->sc_nway_active->ifm_aux; } sc->sc_opmode |= OPMODE_MBO | tm->tm_opmode; TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); } /* * tlp_2114x_mii_preinit: * * Pre-init function shared by DECchip 21140, 21140A, 21142, and 21143. * This version is used by boards which only have MII and don't have * an ISV SROM. */ void tlp_2114x_mii_preinit(sc) struct tulip_softc *sc; { /* * Always set the Must-Be-One bit, and Port Select (to select MII). * We'll never be called during a media change. */ sc->sc_opmode |= OPMODE_MBO|OPMODE_PS; TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); } /* * tlp_pnic_preinit: * * Pre-init function for the Lite-On 82c168 and 82c169. */ void tlp_pnic_preinit(sc) struct tulip_softc *sc; { if (sc->sc_flags & TULIPF_HAS_MII) { /* * MII case: just set the port-select bit; we will never * be called during a media change. */ sc->sc_opmode |= OPMODE_PS; } else { /* * ENDEC/PCS/Nway mode; enable the Tx backoff counter. */ sc->sc_opmode |= OPMODE_PNIC_TBEN; } } /* * tlp_21140_reset: * * Issue a reset sequence on the 21140 via the GPIO facility. */ void tlp_21140_reset(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; struct tulip_21x4x_media *tm = ife->ifm_aux; int i; /* First, set the direction on the GPIO pins. */ TULIP_WRITE(sc, CSR_GPP, GPP_GPC|sc->sc_gp_dir); /* Now, issue the reset sequence. */ for (i = 0; i < tm->tm_reset_length; i++) { delay(10); TULIP_WRITE(sc, CSR_GPP, sc->sc_srom[tm->tm_reset_offset + i]); } /* Now, issue the selection sequence. */ for (i = 0; i < tm->tm_gp_length; i++) { delay(10); TULIP_WRITE(sc, CSR_GPP, sc->sc_srom[tm->tm_gp_offset + i]); } /* If there were no sequences, just lower the pins. */ if (tm->tm_reset_length == 0 && tm->tm_gp_length == 0) TULIP_WRITE(sc, CSR_GPP, 0); } /* * tlp_21142_reset: * * Issue a reset sequence on the 21142 via the GPIO facility. */ void tlp_21142_reset(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; struct tulip_21x4x_media *tm = ife->ifm_aux; const u_int8_t *ncp; int i; ncp = &sc->sc_srom[tm->tm_reset_offset]; for (i = 0; i < tm->tm_reset_length; i++, ncp += 2) { delay(10); TULIP_WRITE(sc, CSR_SIAGEN, TULIP_ROM_GETW(ncp, 0) << 16); } ncp = &sc->sc_srom[tm->tm_gp_offset]; for (i = 0; i < tm->tm_gp_length; i++, ncp += 2) { delay(10); TULIP_WRITE(sc, CSR_SIAGEN, TULIP_ROM_GETW(ncp, 0) << 16); } /* If there were no sequences, just lower the pins. */ if (tm->tm_reset_length == 0 && tm->tm_gp_length == 0) { delay(10); TULIP_WRITE(sc, CSR_SIAGEN, 0); } } /* * tlp_pmac_reset: * * Reset routine for Macronix chips. */ void tlp_pmac_reset(sc) struct tulip_softc *sc; { switch (sc->sc_chip) { case TULIP_CHIP_82C115: case TULIP_CHIP_MX98715: case TULIP_CHIP_MX98715A: case TULIP_CHIP_MX98725: /* * Set the LED operating mode. This information is located * in the EEPROM at byte offset 0x77, per the MX98715A and * MX98725 application notes. */ TULIP_WRITE(sc, CSR_MIIROM, sc->sc_srom[0x77] << 24); break; default: /* Nothing. */ } } /***************************************************************************** * Chip/board-specific media switches. The ones here are ones that * are potentially common to multiple front-ends. *****************************************************************************/ /* * This table is a common place for all sorts of media information, * keyed off of the SROM media code for that media. * * Note that we explicitly configure the 21142/21143 to always advertise * NWay capabilities when using the UTP port. * XXX Actually, we don't yet. */ const struct tulip_srom_to_ifmedia tulip_srom_to_ifmedia_table[] = { { TULIP_ROM_MB_MEDIA_TP, IFM_10_T, 0, "10baseT", 0, { SIACONN_21040_10BASET, SIATXRX_21040_10BASET, SIAGEN_21040_10BASET }, { SIACONN_21041_10BASET, SIATXRX_21041_10BASET, SIAGEN_21041_10BASET }, { SIACONN_21142_10BASET, SIATXRX_21142_10BASET, SIAGEN_21142_10BASET } }, { TULIP_ROM_MB_MEDIA_BNC, IFM_10_2, 0, "10base2", 0, { 0, 0, 0 }, { SIACONN_21041_BNC, SIATXRX_21041_BNC, SIAGEN_21041_BNC }, { SIACONN_21142_BNC, SIATXRX_21142_BNC, SIAGEN_21142_BNC } }, { TULIP_ROM_MB_MEDIA_AUI, IFM_10_5, 0, "10base5", 0, { SIACONN_21040_AUI, SIATXRX_21040_AUI, SIAGEN_21040_AUI }, { SIACONN_21041_AUI, SIATXRX_21041_AUI, SIAGEN_21041_AUI }, { SIACONN_21142_AUI, SIATXRX_21142_AUI, SIAGEN_21142_AUI } }, { TULIP_ROM_MB_MEDIA_100TX, IFM_100_TX, 0, "100baseTX", OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_HBD, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, SIAGEN_ABM } }, { TULIP_ROM_MB_MEDIA_TP_FDX, IFM_10_T, IFM_FDX, "10baseT-FDX", OPMODE_FD|OPMODE_HBD, { SIACONN_21040_10BASET_FDX, SIATXRX_21040_10BASET_FDX, SIAGEN_21040_10BASET_FDX }, { SIACONN_21041_10BASET_FDX, SIATXRX_21041_10BASET_FDX, SIAGEN_21041_10BASET_FDX }, { SIACONN_21142_10BASET_FDX, SIATXRX_21142_10BASET_FDX, SIAGEN_21142_10BASET_FDX } }, { TULIP_ROM_MB_MEDIA_100TX_FDX, IFM_100_TX, IFM_FDX, "100baseTX-FDX", OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_FD|OPMODE_HBD, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, SIAGEN_ABM } }, { TULIP_ROM_MB_MEDIA_100T4, IFM_100_T4, 0, "100baseT4", OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_HBD, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, SIAGEN_ABM } }, { TULIP_ROM_MB_MEDIA_100FX, IFM_100_FX, 0, "100baseFX", OPMODE_PS|OPMODE_PCS|OPMODE_HBD, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, SIAGEN_ABM } }, { TULIP_ROM_MB_MEDIA_100FX_FDX, IFM_100_FX, IFM_FDX, "100baseFX-FDX", OPMODE_PS|OPMODE_PCS|OPMODE_FD|OPMODE_HBD, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, SIAGEN_ABM } }, { 0, 0, 0, NULL, 0, { 0, 0, 0 }, { 0, 0, 0 }, { 0, 0, 0 } }, }; const struct tulip_srom_to_ifmedia *tlp_srom_to_ifmedia __P((u_int8_t)); void tlp_srom_media_info __P((struct tulip_softc *, const struct tulip_srom_to_ifmedia *, struct tulip_21x4x_media *)); void tlp_add_srom_media __P((struct tulip_softc *, int, void (*)(struct tulip_softc *, struct ifmediareq *), int (*)(struct tulip_softc *), const u_int8_t *, int)); void tlp_print_media __P((struct tulip_softc *)); void tlp_nway_activate __P((struct tulip_softc *, int)); void tlp_get_minst __P((struct tulip_softc *)); const struct tulip_srom_to_ifmedia * tlp_srom_to_ifmedia(sm) u_int8_t sm; { const struct tulip_srom_to_ifmedia *tsti; for (tsti = tulip_srom_to_ifmedia_table; tsti->tsti_name != NULL; tsti++) { if (tsti->tsti_srom == sm) return (tsti); } return (NULL); } void tlp_srom_media_info(sc, tsti, tm) struct tulip_softc *sc; const struct tulip_srom_to_ifmedia *tsti; struct tulip_21x4x_media *tm; { tm->tm_name = tsti->tsti_name; tm->tm_opmode = tsti->tsti_opmode; switch (sc->sc_chip) { case TULIP_CHIP_DE425: case TULIP_CHIP_21040: tm->tm_sia = tsti->tsti_21040; /* struct assignment */ break; case TULIP_CHIP_21041: tm->tm_sia = tsti->tsti_21041; /* struct assignment */ break; case TULIP_CHIP_21142: case TULIP_CHIP_21143: case TULIP_CHIP_82C115: case TULIP_CHIP_MX98715: case TULIP_CHIP_MX98715A: case TULIP_CHIP_MX98725: tm->tm_sia = tsti->tsti_21142; /* struct assignment */ break; default: /* Nothing. */ } } void tlp_add_srom_media(sc, type, get, set, list, cnt) struct tulip_softc *sc; int type; void (*get) __P((struct tulip_softc *, struct ifmediareq *)); int (*set) __P((struct tulip_softc *)); const u_int8_t *list; int cnt; { struct tulip_21x4x_media *tm; const struct tulip_srom_to_ifmedia *tsti; int i; for (i = 0; i < cnt; i++) { tsti = tlp_srom_to_ifmedia(list[i]); tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK); memset(tm, 0, sizeof(*tm)); tlp_srom_media_info(sc, tsti, tm); tm->tm_type = type; tm->tm_get = get; tm->tm_set = set; ifmedia_add(&sc->sc_mii.mii_media, IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype, tsti->tsti_options, sc->sc_tlp_minst), 0, tm); } } void tlp_print_media(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife; struct tulip_21x4x_media *tm; const char *sep = ""; #define PRINT(s) printf("%s%s", sep, s); sep = ", " printf("%s: ", sc->sc_dev.dv_xname); for (ife = TAILQ_FIRST(&sc->sc_mii.mii_media.ifm_list); ife != NULL; ife = TAILQ_NEXT(ife, ifm_list)) { tm = ife->ifm_aux; if (tm == NULL) { #ifdef DIAGNOSTIC if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) panic("tlp_print_media"); #endif PRINT("auto"); } else if (tm->tm_type != TULIP_ROM_MB_21140_MII && tm->tm_type != TULIP_ROM_MB_21142_MII) { PRINT(tm->tm_name); } } printf("\n"); #undef PRINT } void tlp_nway_activate(sc, media) struct tulip_softc *sc; int media; { struct ifmedia_entry *ife; ife = ifmedia_match(&sc->sc_mii.mii_media, media, 0); #ifdef DIAGNOSTIC if (ife == NULL) panic("tlp_nway_activate"); #endif sc->sc_nway_active = ife; } void tlp_get_minst(sc) struct tulip_softc *sc; { if ((sc->sc_media_seen & ~((1 << TULIP_ROM_MB_21140_MII) | (1 << TULIP_ROM_MB_21142_MII))) == 0) { /* * We have not yet seen any SIA/SYM media (but are * about to; that's why we're called!), so assign * the current media instance to be the `internal media' * instance, and advance it so any MII media gets a * fresh one (used to selecting/isolating a PHY). */ sc->sc_tlp_minst = sc->sc_mii.mii_instance++; } } /* * SIA Utility functions. */ void tlp_sia_update_link __P((struct tulip_softc *)); void tlp_sia_get __P((struct tulip_softc *, struct ifmediareq *)); int tlp_sia_set __P((struct tulip_softc *)); void tlp_sia_fixup __P((struct tulip_softc *)); void tlp_sia_update_link(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife; struct tulip_21x4x_media *tm; u_int32_t siastat; ife = TULIP_CURRENT_MEDIA(sc); tm = ife->ifm_aux; sc->sc_flags &= ~(TULIPF_LINK_UP|TULIPF_LINK_VALID); siastat = TULIP_READ(sc, CSR_SIASTAT); /* * Note that when we do SIA link tests, we are assuming that * the chip is really in the mode that the current media setting * reflects. If we're not, then the link tests will not be * accurate! */ switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_10_T: sc->sc_flags |= TULIPF_LINK_VALID; if ((siastat & SIASTAT_LS10) == 0) sc->sc_flags |= TULIPF_LINK_UP; break; case IFM_100_TX: case IFM_100_T4: sc->sc_flags |= TULIPF_LINK_VALID; if ((siastat & SIASTAT_LS100) == 0) sc->sc_flags |= TULIPF_LINK_UP; break; } switch (sc->sc_chip) { case TULIP_CHIP_21142: case TULIP_CHIP_21143: /* * On these chips, we can tell more information about * AUI/BNC. Note that the AUI/BNC selection is made * in a different register; for our purpose, it's all * AUI. */ switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_10_2: case IFM_10_5: sc->sc_flags |= TULIPF_LINK_VALID; if (siastat & SIASTAT_ARA) { TULIP_WRITE(sc, CSR_SIASTAT, SIASTAT_ARA); sc->sc_flags |= TULIPF_LINK_UP; } break; default: /* * If we're SYM media and can detect the link * via the GPIO facility, prefer that status * over LS100. */ if (tm->tm_type == TULIP_ROM_MB_21143_SYM && tm->tm_actmask != 0) { sc->sc_flags = (sc->sc_flags & ~TULIPF_LINK_UP) | TULIPF_LINK_VALID; if (TULIP_ISSET(sc, CSR_SIAGEN, tm->tm_actmask) == tm->tm_actdata) sc->sc_flags |= TULIPF_LINK_UP; } } break; default: /* Nothing. */ } } void tlp_sia_get(sc, ifmr) struct tulip_softc *sc; struct ifmediareq *ifmr; { struct ifmedia_entry *ife; ifmr->ifm_status = 0; tlp_sia_update_link(sc); ife = TULIP_CURRENT_MEDIA(sc); if (sc->sc_flags & TULIPF_LINK_VALID) ifmr->ifm_status |= IFM_AVALID; if (sc->sc_flags & TULIPF_LINK_UP) ifmr->ifm_status |= IFM_ACTIVE; ifmr->ifm_active = ife->ifm_media; } void tlp_sia_fixup(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife; struct tulip_21x4x_media *tm; u_int32_t siaconn, siatxrx, siagen; switch (sc->sc_chip) { case TULIP_CHIP_82C115: case TULIP_CHIP_MX98713A: case TULIP_CHIP_MX98715: case TULIP_CHIP_MX98715A: case TULIP_CHIP_MX98725: siaconn = PMAC_SIACONN_MASK; siatxrx = PMAC_SIATXRX_MASK; siagen = PMAC_SIAGEN_MASK; break; default: /* No fixups required on any other chips. */ return; } for (ife = TAILQ_FIRST(&sc->sc_mii.mii_media.ifm_list); ife != NULL; ife = TAILQ_NEXT(ife, ifm_list)) { tm = ife->ifm_aux; if (tm == NULL) continue; tm->tm_siaconn &= siaconn; tm->tm_siatxrx &= siatxrx; tm->tm_siagen &= siagen; } } int tlp_sia_set(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife; struct tulip_21x4x_media *tm; ife = TULIP_CURRENT_MEDIA(sc); tm = ife->ifm_aux; /* * XXX This appears to be necessary on a bunch of the clone chips. */ delay(20000); /* * Idle the chip. */ tlp_idle(sc, OPMODE_ST|OPMODE_SR); /* * Program the SIA. It's important to write in this order, * resetting the SIA first. */ TULIP_WRITE(sc, CSR_SIACONN, 0); /* SRL bit clear */ delay(1000); TULIP_WRITE(sc, CSR_SIATXRX, tm->tm_siatxrx); switch (sc->sc_chip) { case TULIP_CHIP_21142: case TULIP_CHIP_21143: TULIP_WRITE(sc, CSR_SIAGEN, tm->tm_siagen | tm->tm_gpctl); TULIP_WRITE(sc, CSR_SIAGEN, tm->tm_siagen | tm->tm_gpdata); break; default: TULIP_WRITE(sc, CSR_SIAGEN, tm->tm_siagen); } TULIP_WRITE(sc, CSR_SIACONN, tm->tm_siaconn); /* * Set the OPMODE bits for this media and write OPMODE. * This will resume the transmit and receive processes. */ sc->sc_opmode = (sc->sc_opmode & ~OPMODE_MEDIA_BITS) | tm->tm_opmode; TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); return (0); } /* * 21140 GPIO utility functions. */ void tlp_21140_gpio_update_link __P((struct tulip_softc *)); void tlp_21140_gpio_get __P((struct tulip_softc *sc, struct ifmediareq *ifmr)); int tlp_21140_gpio_set __P((struct tulip_softc *sc)); void tlp_21140_gpio_update_link(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife; struct tulip_21x4x_media *tm; ife = TULIP_CURRENT_MEDIA(sc); tm = ife->ifm_aux; sc->sc_flags &= ~(TULIPF_LINK_UP|TULIPF_LINK_VALID); if (tm->tm_actmask != 0) { sc->sc_flags |= TULIPF_LINK_VALID; if (TULIP_ISSET(sc, CSR_GPP, tm->tm_actmask) == tm->tm_actdata) sc->sc_flags |= TULIPF_LINK_UP; } } void tlp_21140_gpio_get(sc, ifmr) struct tulip_softc *sc; struct ifmediareq *ifmr; { struct ifmedia_entry *ife; ifmr->ifm_status = 0; tlp_21140_gpio_update_link(sc); ife = TULIP_CURRENT_MEDIA(sc); if (sc->sc_flags & TULIPF_LINK_VALID) ifmr->ifm_status |= IFM_AVALID; if (sc->sc_flags & TULIPF_LINK_UP) ifmr->ifm_status |= IFM_ACTIVE; ifmr->ifm_active = ife->ifm_media; } int tlp_21140_gpio_set(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife; struct tulip_21x4x_media *tm; ife = TULIP_CURRENT_MEDIA(sc); tm = ife->ifm_aux; /* * Idle the chip. */ tlp_idle(sc, OPMODE_ST|OPMODE_SR); /* * Set the GPIO pins for this media, to flip any * relays, etc. */ TULIP_WRITE(sc, CSR_GPP, GPP_GPC|sc->sc_gp_dir); delay(10); TULIP_WRITE(sc, CSR_GPP, tm->tm_gpdata); /* * Set the OPMODE bits for this media and write OPMODE. * This will resume the transmit and receive processes. */ sc->sc_opmode = (sc->sc_opmode & ~OPMODE_MEDIA_BITS) | tm->tm_opmode; TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); return (0); } /* * 21040 and 21041 media switches. */ void tlp_21040_tmsw_init __P((struct tulip_softc *)); void tlp_21040_tp_tmsw_init __P((struct tulip_softc *)); void tlp_21040_auibnc_tmsw_init __P((struct tulip_softc *)); void tlp_21041_tmsw_init __P((struct tulip_softc *)); const struct tulip_mediasw tlp_21040_mediasw = { tlp_21040_tmsw_init, tlp_sia_get, tlp_sia_set }; const struct tulip_mediasw tlp_21040_tp_mediasw = { tlp_21040_tp_tmsw_init, tlp_sia_get, tlp_sia_set }; const struct tulip_mediasw tlp_21040_auibnc_mediasw = { tlp_21040_auibnc_tmsw_init, tlp_sia_get, tlp_sia_set }; const struct tulip_mediasw tlp_21041_mediasw = { tlp_21041_tmsw_init, tlp_sia_get, tlp_sia_set }; void tlp_21040_tmsw_init(sc) struct tulip_softc *sc; { static const u_int8_t media[] = { TULIP_ROM_MB_MEDIA_TP, TULIP_ROM_MB_MEDIA_TP_FDX, TULIP_ROM_MB_MEDIA_AUI, }; struct tulip_21x4x_media *tm; ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange, tlp_mediastatus); tlp_add_srom_media(sc, 0, NULL, NULL, media, 3); /* * No SROM type for External SIA. */ tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK); memset(tm, 0, sizeof(*tm)); tm->tm_name = "manual"; tm->tm_opmode = 0; tm->tm_siaconn = SIACONN_21040_EXTSIA; tm->tm_siatxrx = SIATXRX_21040_EXTSIA; tm->tm_siagen = SIAGEN_21040_EXTSIA; ifmedia_add(&sc->sc_mii.mii_media, IFM_MAKEWORD(IFM_ETHER, IFM_MANUAL, 0, sc->sc_tlp_minst), 0, tm); /* * XXX Autosense not yet supported. */ /* XXX This should be auto-sense. */ ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T); tlp_print_media(sc); } void tlp_21040_tp_tmsw_init(sc) struct tulip_softc *sc; { static const u_int8_t media[] = { TULIP_ROM_MB_MEDIA_TP, TULIP_ROM_MB_MEDIA_TP_FDX, }; ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange, tlp_mediastatus); tlp_add_srom_media(sc, 0, NULL, NULL, media, 2); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T); tlp_print_media(sc); } void tlp_21040_auibnc_tmsw_init(sc) struct tulip_softc *sc; { static const u_int8_t media[] = { TULIP_ROM_MB_MEDIA_AUI, }; ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange, tlp_mediastatus); tlp_add_srom_media(sc, 0, NULL, NULL, media, 1); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_5); tlp_print_media(sc); } void tlp_21041_tmsw_init(sc) struct tulip_softc *sc; { static const u_int8_t media[] = { TULIP_ROM_MB_MEDIA_TP, TULIP_ROM_MB_MEDIA_TP_FDX, TULIP_ROM_MB_MEDIA_BNC, TULIP_ROM_MB_MEDIA_AUI, }; int i, defmedia, devcnt, leaf_offset, mb_offset, m_cnt; const struct tulip_srom_to_ifmedia *tsti; struct tulip_21x4x_media *tm; u_int16_t romdef; u_int8_t mb; ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange, tlp_mediastatus); if (tlp_isv_srom(sc->sc_srom) == 0) { not_isv_srom: /* * If we have a board without the standard 21041 SROM format, * we just assume all media are present and try and pick a * reasonable default. */ tlp_add_srom_media(sc, 0, NULL, NULL, media, 4); /* * XXX Autosense not yet supported. */ /* XXX This should be auto-sense. */ ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T); tlp_print_media(sc); return; } devcnt = sc->sc_srom[TULIP_ROM_CHIP_COUNT]; for (i = 0; i < devcnt; i++) { if (sc->sc_srom[TULIP_ROM_CHIP_COUNT] == 1) break; if (sc->sc_srom[TULIP_ROM_CHIPn_DEVICE_NUMBER(i)] == sc->sc_devno) break; } if (i == devcnt) goto not_isv_srom; leaf_offset = TULIP_ROM_GETW(sc->sc_srom, TULIP_ROM_CHIPn_INFO_LEAF_OFFSET(i)); mb_offset = leaf_offset + TULIP_ROM_IL_MEDIAn_BLOCK_BASE; m_cnt = sc->sc_srom[leaf_offset + TULIP_ROM_IL_MEDIA_COUNT]; for (; m_cnt != 0; m_cnt--, mb_offset += TULIP_ROM_MB_SIZE(mb)) { mb = sc->sc_srom[mb_offset]; tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK); memset(tm, 0, sizeof(*tm)); switch (mb & TULIP_ROM_MB_MEDIA_CODE) { case TULIP_ROM_MB_MEDIA_TP_FDX: case TULIP_ROM_MB_MEDIA_TP: case TULIP_ROM_MB_MEDIA_BNC: case TULIP_ROM_MB_MEDIA_AUI: tsti = tlp_srom_to_ifmedia(mb & TULIP_ROM_MB_MEDIA_CODE); tlp_srom_media_info(sc, tsti, tm); /* * Override our default SIA settings if the * SROM contains its own. */ if (mb & TULIP_ROM_MB_EXT) { tm->tm_siaconn = TULIP_ROM_GETW(sc->sc_srom, mb_offset + TULIP_ROM_MB_CSR13); tm->tm_siatxrx = TULIP_ROM_GETW(sc->sc_srom, mb_offset + TULIP_ROM_MB_CSR14); tm->tm_siagen = TULIP_ROM_GETW(sc->sc_srom, mb_offset + TULIP_ROM_MB_CSR15); } ifmedia_add(&sc->sc_mii.mii_media, IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype, tsti->tsti_options, sc->sc_tlp_minst), 0, tm); break; default: printf("%s: unknown media code 0x%02x\n", sc->sc_dev.dv_xname, mb & TULIP_ROM_MB_MEDIA_CODE); free(tm, M_DEVBUF); } } /* * XXX Autosense not yet supported. */ romdef = TULIP_ROM_GETW(sc->sc_srom, leaf_offset + TULIP_ROM_IL_SELECT_CONN_TYPE); switch (romdef) { case SELECT_CONN_TYPE_TP: case SELECT_CONN_TYPE_TP_AUTONEG: case SELECT_CONN_TYPE_TP_NOLINKPASS: defmedia = IFM_ETHER|IFM_10_T; break; case SELECT_CONN_TYPE_TP_FDX: defmedia = IFM_ETHER|IFM_10_T|IFM_FDX; break; case SELECT_CONN_TYPE_BNC: defmedia = IFM_ETHER|IFM_10_2; break; case SELECT_CONN_TYPE_AUI: defmedia = IFM_ETHER|IFM_10_5; break; #if 0 /* XXX */ case SELECT_CONN_TYPE_ASENSE: case SELECT_CONN_TYPE_ASENSE_AUTONEG: defmedia = IFM_ETHER|IFM_AUTO; break; #endif default: defmedia = 0; } if (defmedia == 0) { /* * XXX We should default to auto-sense. */ defmedia = IFM_ETHER|IFM_10_T; } ifmedia_set(&sc->sc_mii.mii_media, defmedia); tlp_print_media(sc); } /* * DECchip 2114x ISV media switch. */ void tlp_2114x_isv_tmsw_init __P((struct tulip_softc *)); void tlp_2114x_isv_tmsw_get __P((struct tulip_softc *, struct ifmediareq *)); int tlp_2114x_isv_tmsw_set __P((struct tulip_softc *)); const struct tulip_mediasw tlp_2114x_isv_mediasw = { tlp_2114x_isv_tmsw_init, tlp_2114x_isv_tmsw_get, tlp_2114x_isv_tmsw_set }; void tlp_2114x_isv_tmsw_init(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ifmedia_entry *ife; struct mii_softc *phy; struct tulip_21x4x_media *tm; const struct tulip_srom_to_ifmedia *tsti; int i, devcnt, leaf_offset, m_cnt, type, length; int defmedia, miidef; u_int16_t word; u_int8_t *cp, *ncp; defmedia = miidef = 0; sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg; sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg; sc->sc_mii.mii_statchg = sc->sc_statchg; /* * Ignore `instance'; we may get a mixture of SIA and MII * media, and `instance' is used to isolate or select the * PHY on the MII as appropriate. Note that duplicate media * are disallowed, so ignoring `instance' is safe. */ ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, tlp_mediachange, tlp_mediastatus); devcnt = sc->sc_srom[TULIP_ROM_CHIP_COUNT]; for (i = 0; i < devcnt; i++) { if (sc->sc_srom[TULIP_ROM_CHIP_COUNT] == 1) break; if (sc->sc_srom[TULIP_ROM_CHIPn_DEVICE_NUMBER(i)] == sc->sc_devno) break; } if (i == devcnt) { printf("%s: unable to locate info leaf in SROM\n", sc->sc_dev.dv_xname); return; } leaf_offset = TULIP_ROM_GETW(sc->sc_srom, TULIP_ROM_CHIPn_INFO_LEAF_OFFSET(i)); /* XXX SELECT CONN TYPE */ cp = &sc->sc_srom[leaf_offset + TULIP_ROM_IL_MEDIA_COUNT]; /* * On some chips, the first thing in the Info Leaf is the * GPIO pin direction data. */ switch (sc->sc_chip) { case TULIP_CHIP_21140: case TULIP_CHIP_21140A: case TULIP_CHIP_MX98713: case TULIP_CHIP_AX88140: case TULIP_CHIP_AX88141: sc->sc_gp_dir = *cp++; break; default: /* Nothing. */ } /* Get the media count. */ m_cnt = *cp++; for (; m_cnt != 0; cp = ncp, m_cnt--) { /* * Determine the type and length of this media block. */ if ((*cp & 0x80) == 0) { length = 4; type = TULIP_ROM_MB_21140_GPR; } else { length = (*cp++ & 0x7f) - 1; type = *cp++ & 0x3f; } /* Compute the start of the next block. */ ncp = cp + length; /* Now, parse the block. */ switch (type) { case TULIP_ROM_MB_21140_GPR: tlp_get_minst(sc); sc->sc_media_seen |= 1 << TULIP_ROM_MB_21140_GPR; tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK); memset(tm, 0, sizeof(*tm)); tm->tm_type = TULIP_ROM_MB_21140_GPR; tm->tm_get = tlp_21140_gpio_get; tm->tm_set = tlp_21140_gpio_set; /* First is the media type code. */ tsti = tlp_srom_to_ifmedia(cp[0] & TULIP_ROM_MB_MEDIA_CODE); if (tsti == NULL) { /* Invalid media code. */ free(tm, M_DEVBUF); break; } /* Get defaults. */ tlp_srom_media_info(sc, tsti, tm); /* Next is any GPIO info for this media. */ tm->tm_gpdata = cp[1]; /* * Next is a word containing OPMODE information * and info on how to detect if this media is * active. */ word = TULIP_ROM_GETW(cp, 2); tm->tm_opmode = TULIP_ROM_MB_OPMODE(word); if ((word & TULIP_ROM_MB_NOINDICATOR) == 0) { tm->tm_actmask = TULIP_ROM_MB_BITPOS(word); tm->tm_actdata = (word & TULIP_ROM_MB_POLARITY) ? 0 : tm->tm_actmask; } ifmedia_add(&sc->sc_mii.mii_media, IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype, tsti->tsti_options, sc->sc_tlp_minst), 0, tm); break; case TULIP_ROM_MB_21140_MII: sc->sc_media_seen |= 1 << TULIP_ROM_MB_21140_MII; tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK); memset(tm, 0, sizeof(*tm)); tm->tm_type = TULIP_ROM_MB_21140_MII; tm->tm_get = tlp_mii_getmedia; tm->tm_set = tlp_mii_setmedia; tm->tm_opmode = OPMODE_PS; if (sc->sc_reset == NULL) sc->sc_reset = tlp_21140_reset; /* First is the PHY number. */ tm->tm_phyno = *cp++; /* Next is the MII select sequence length and offset. */ tm->tm_gp_length = *cp++; tm->tm_gp_offset = cp - &sc->sc_srom[0]; cp += tm->tm_gp_length; /* Next is the MII reset sequence length and offset. */ tm->tm_reset_length = *cp++; tm->tm_reset_offset = cp - &sc->sc_srom[0]; cp += tm->tm_reset_length; /* * The following items are left in the media block * that we don't particularly care about: * * capabilities W * advertisement W * full duplex W * tx threshold W * * These appear to be bits in the PHY registers, * which our MII code handles on its own. */ /* * Before we probe the MII bus, we need to reset * it and issue the selection sequence. */ /* Set the direction of the pins... */ TULIP_WRITE(sc, CSR_GPP, GPP_GPC|sc->sc_gp_dir); for (i = 0; i < tm->tm_reset_length; i++) { delay(10); TULIP_WRITE(sc, CSR_GPP, sc->sc_srom[tm->tm_reset_offset + i]); } for (i = 0; i < tm->tm_gp_length; i++) { delay(10); TULIP_WRITE(sc, CSR_GPP, sc->sc_srom[tm->tm_gp_offset + i]); } /* If there were no sequences, just lower the pins. */ if (tm->tm_reset_length == 0 && tm->tm_gp_length == 0) { delay(10); TULIP_WRITE(sc, CSR_GPP, 0); } /* * Now, probe the MII for the PHY. Note, we know * the location of the PHY on the bus, but we don't * particularly care; the MII code just likes to * search the whole thing anyhow. */ mii_phy_probe(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, tm->tm_phyno); /* * Now, search for the PHY we hopefully just * configured. If it's not configured into the * kernel, we lose. The PHY's default media always * takes priority. */ for (phy = LIST_FIRST(&sc->sc_mii.mii_phys); phy != NULL; phy = LIST_NEXT(phy, mii_list)) if (phy->mii_offset == tm->tm_phyno) break; if (phy == NULL) { printf("%s: unable to configure MII\n", sc->sc_dev.dv_xname); break; } sc->sc_flags |= TULIPF_HAS_MII; sc->sc_tick = tlp_mii_tick; miidef = IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, phy->mii_inst); /* * Okay, now that we've found the PHY and the MII * layer has added all of the media associated * with that PHY, we need to traverse the media * list, and add our `tm' to each entry's `aux' * pointer. * * We do this by looking for media with our * PHY's `instance'. */ for (ife = TAILQ_FIRST(&sc->sc_mii.mii_media.ifm_list); ife != NULL; ife = TAILQ_NEXT(ife, ifm_list)) { if (IFM_INST(ife->ifm_media) != phy->mii_inst) continue; ife->ifm_aux = tm; } break; case TULIP_ROM_MB_21142_SIA: tlp_get_minst(sc); sc->sc_media_seen |= 1 << TULIP_ROM_MB_21142_SIA; tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK); memset(tm, 0, sizeof(*tm)); tm->tm_type = TULIP_ROM_MB_21142_SIA; tm->tm_get = tlp_sia_get; tm->tm_set = tlp_sia_set; /* First is the media type code. */ tsti = tlp_srom_to_ifmedia(cp[0] & TULIP_ROM_MB_MEDIA_CODE); if (tsti == NULL) { /* Invalid media code. */ free(tm, M_DEVBUF); break; } /* Get defaults. */ tlp_srom_media_info(sc, tsti, tm); /* * Override our default SIA settings if the * SROM contains its own. */ if (cp[0] & 0x40) { tm->tm_siaconn = TULIP_ROM_GETW(cp, 1); tm->tm_siatxrx = TULIP_ROM_GETW(cp, 3); tm->tm_siagen = TULIP_ROM_GETW(cp, 5); cp += 7; } else cp++; /* Next is GPIO control/data. */ tm->tm_gpctl = TULIP_ROM_GETW(cp, 0); tm->tm_gpdata = TULIP_ROM_GETW(cp, 2); ifmedia_add(&sc->sc_mii.mii_media, IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype, tsti->tsti_options, sc->sc_tlp_minst), 0, tm); break; case TULIP_ROM_MB_21142_MII: sc->sc_media_seen |= 1 << TULIP_ROM_MB_21142_MII; tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK); memset(tm, 0, sizeof(*tm)); tm->tm_type = TULIP_ROM_MB_21142_MII; tm->tm_get = tlp_mii_getmedia; tm->tm_set = tlp_mii_setmedia; tm->tm_opmode = OPMODE_PS; if (sc->sc_reset == NULL) sc->sc_reset = tlp_21142_reset; /* First is the PHY number. */ tm->tm_phyno = *cp++; /* Next is the MII select sequence length and offset. */ tm->tm_gp_length = *cp++; tm->tm_gp_offset = cp - &sc->sc_srom[0]; cp += tm->tm_gp_length * 2; /* Next is the MII reset sequence length and offset. */ tm->tm_reset_length = *cp++; tm->tm_reset_offset = cp - &sc->sc_srom[0]; cp += tm->tm_reset_length * 2; /* * The following items are left in the media block * that we don't particularly care about: * * capabilities W * advertisement W * full duplex W * tx threshold W * MII interrupt W * * These appear to be bits in the PHY registers, * which our MII code handles on its own. */ /* * Before we probe the MII bus, we need to reset * it and issue the selection sequence. */ ncp = &sc->sc_srom[tm->tm_reset_offset]; for (i = 0; i < tm->tm_reset_length; i++, ncp += 2) { delay(10); TULIP_WRITE(sc, CSR_SIAGEN, TULIP_ROM_GETW(ncp, 0) << 16); } ncp = &sc->sc_srom[tm->tm_gp_offset]; for (i = 0; i < tm->tm_gp_length; i++, ncp += 2) { delay(10); TULIP_WRITE(sc, CSR_SIAGEN, TULIP_ROM_GETW(ncp, 0) << 16); } /* If there were no sequences, just lower the pins. */ if (tm->tm_reset_length == 0 && tm->tm_gp_length == 0) { delay(10); TULIP_WRITE(sc, CSR_SIAGEN, 0); } /* * Now, probe the MII for the PHY. Note, we know * the location of the PHY on the bus, but we don't * particularly care; the MII code just likes to * search the whole thing anyhow. */ mii_phy_probe(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, tm->tm_phyno); /* * Now, search for the PHY we hopefully just * configured. If it's not configured into the * kernel, we lose. The PHY's default media always * takes priority. */ for (phy = LIST_FIRST(&sc->sc_mii.mii_phys); phy != NULL; phy = LIST_NEXT(phy, mii_list)) if (phy->mii_offset == tm->tm_phyno) break; if (phy == NULL) { printf("%s: unable to configure MII\n", sc->sc_dev.dv_xname); break; } sc->sc_flags |= TULIPF_HAS_MII; sc->sc_tick = tlp_mii_tick; miidef = IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, phy->mii_inst); /* * Okay, now that we've found the PHY and the MII * layer has added all of the media associated * with that PHY, we need to traverse the media * list, and add our `tm' to each entry's `aux' * pointer. * * We do this by looking for media with our * PHY's `instance'. */ for (ife = TAILQ_FIRST(&sc->sc_mii.mii_media.ifm_list); ife != NULL; ife = TAILQ_NEXT(ife, ifm_list)) { if (IFM_INST(ife->ifm_media) != phy->mii_inst) continue; ife->ifm_aux = tm; } break; case TULIP_ROM_MB_21143_SYM: tlp_get_minst(sc); sc->sc_media_seen |= 1 << TULIP_ROM_MB_21143_SYM; tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK); memset(tm, 0, sizeof(*tm)); tm->tm_type = TULIP_ROM_MB_21143_SYM; tm->tm_get = tlp_sia_get; tm->tm_set = tlp_sia_set; /* First is the media type code. */ tsti = tlp_srom_to_ifmedia(cp[0] & TULIP_ROM_MB_MEDIA_CODE); if (tsti == NULL) { /* Invalid media code. */ free(tm, M_DEVBUF); break; } /* Get defaults. */ tlp_srom_media_info(sc, tsti, tm); /* Next is GPIO control/data. */ tm->tm_gpctl = TULIP_ROM_GETW(cp, 1); tm->tm_gpdata = TULIP_ROM_GETW(cp, 3); /* * Next is a word containing OPMODE information * and info on how to detect if this media is * active. */ word = TULIP_ROM_GETW(cp, 5); tm->tm_opmode = TULIP_ROM_MB_OPMODE(word); if ((word & TULIP_ROM_MB_NOINDICATOR) == 0) { tm->tm_actmask = TULIP_ROM_MB_BITPOS(word); tm->tm_actdata = (word & TULIP_ROM_MB_POLARITY) ? 0 : tm->tm_actmask; } ifmedia_add(&sc->sc_mii.mii_media, IFM_MAKEWORD(IFM_ETHER, tsti->tsti_subtype, tsti->tsti_options, sc->sc_tlp_minst), 0, tm); break; case TULIP_ROM_MB_21143_RESET: printf("%s: 21143 reset block\n", sc->sc_dev.dv_xname); break; default: printf("%s: unknown ISV media block type 0x%02x\n", sc->sc_dev.dv_xname, type); } } /* * Deal with the case where no media is configured. */ if (TAILQ_FIRST(&sc->sc_mii.mii_media.ifm_list) == NULL) { printf("%s: no media found!\n", sc->sc_dev.dv_xname); ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); return; } /* * Pick the default media. */ if (miidef != 0) defmedia = miidef; else { /* * XXX Pick a better default. Should come from SROM * XXX on 21140[A], and should be "auto" on 21142, * XXX 21143, and Macronix chips. */ defmedia = IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, 0); } ifmedia_set(&sc->sc_mii.mii_media, defmedia); /* * Display any non-MII media we've located. */ if (sc->sc_media_seen & ~((1 << TULIP_ROM_MB_21140_MII) | (1 << TULIP_ROM_MB_21142_MII))) tlp_print_media(sc); tlp_sia_fixup(sc); } void tlp_2114x_isv_tmsw_get(sc, ifmr) struct tulip_softc *sc; struct ifmediareq *ifmr; { struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; struct tulip_21x4x_media *tm = ife->ifm_aux; /* * We might be polling a non-MII autosense; check for that. */ if (tm == NULL) { #ifdef DIAGNOSTIC if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) panic("tlp_2114x_isv_tmsw_get"); #endif tm = sc->sc_nway_active->ifm_aux; } (*tm->tm_get)(sc, ifmr); } int tlp_2114x_isv_tmsw_set(sc) struct tulip_softc *sc; { struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; struct tulip_21x4x_media *tm = ife->ifm_aux; /* * We might be setting a non-MII autosense; check for that. */ if (tm == NULL) { #ifdef DIAGNOSTIC if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) panic("tlp_2114x_isv_tmsw_set"); #endif /* XXX XXX XXX */ } /* * Check to see if we need to reset the chip, and do it. The * reset path will get the OPMODE register right the next * time through. */ if (TULIP_MEDIA_NEEDSRESET(sc, tm->tm_opmode)) return (tlp_init(sc)); return ((*tm->tm_set)(sc)); } /* * MII-on-SIO media switch. Handles only MII attached to the SIO. */ void tlp_sio_mii_tmsw_init __P((struct tulip_softc *)); const struct tulip_mediasw tlp_sio_mii_mediasw = { tlp_sio_mii_tmsw_init, tlp_mii_getmedia, tlp_mii_setmedia }; void tlp_sio_mii_tmsw_init(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; /* * We don't attach any media info structures to the ifmedia * entries, so if we're using a pre-init function that needs * that info, override it to one that doesn't. */ if (sc->sc_preinit == tlp_2114x_preinit) sc->sc_preinit = tlp_2114x_mii_preinit; sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg; sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg; sc->sc_mii.mii_statchg = sc->sc_statchg; ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange, tlp_mediastatus); mii_phy_probe(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY); if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); } else { sc->sc_flags |= TULIPF_HAS_MII; sc->sc_tick = tlp_mii_tick; ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } } /* * Lite-On PNIC media switch. Must handle MII or internal NWAY. */ void tlp_pnic_tmsw_init __P((struct tulip_softc *)); void tlp_pnic_tmsw_get __P((struct tulip_softc *, struct ifmediareq *)); int tlp_pnic_tmsw_set __P((struct tulip_softc *)); const struct tulip_mediasw tlp_pnic_mediasw = { tlp_pnic_tmsw_init, tlp_pnic_tmsw_get, tlp_pnic_tmsw_set }; void tlp_pnic_nway_statchg __P((struct device *)); void tlp_pnic_nway_tick __P((void *)); int tlp_pnic_nway_service __P((struct tulip_softc *, int)); void tlp_pnic_nway_reset __P((struct tulip_softc *)); int tlp_pnic_nway_auto __P((struct tulip_softc *, int)); void tlp_pnic_nway_auto_timeout __P((void *)); void tlp_pnic_nway_status __P((struct tulip_softc *)); void tlp_pnic_nway_acomp __P((struct tulip_softc *)); void tlp_pnic_tmsw_init(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; const char *sep = ""; #define ADD(m, c) ifmedia_add(&sc->sc_mii.mii_media, (m), (c), NULL) #define PRINT(s) printf("%s%s", sep, s); sep = ", " sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = tlp_pnic_mii_readreg; sc->sc_mii.mii_writereg = tlp_pnic_mii_writereg; sc->sc_mii.mii_statchg = sc->sc_statchg; ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange, tlp_mediastatus); mii_phy_probe(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY); if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { /* XXX What about AUI/BNC support? */ printf("%s: ", sc->sc_dev.dv_xname); tlp_pnic_nway_reset(sc); ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, 0), PNIC_NWAY_TW|PNIC_NWAY_CAP10T); PRINT("10baseT"); ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, 0), PNIC_NWAY_TW|PNIC_NWAY_FD|PNIC_NWAY_CAP10TFDX); PRINT("10baseT-FDX"); ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, 0), PNIC_NWAY_TW|PNIC_NWAY_100|PNIC_NWAY_CAP100TX); PRINT("100baseTX"); ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, 0), PNIC_NWAY_TW|PNIC_NWAY_100|PNIC_NWAY_FD| PNIC_NWAY_CAP100TXFDX); PRINT("100baseTX-FDX"); ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, 0), PNIC_NWAY_TW|PNIC_NWAY_RN|PNIC_NWAY_NW| PNIC_NWAY_CAP10T|PNIC_NWAY_CAP10TFDX| PNIC_NWAY_CAP100TXFDX|PNIC_NWAY_CAP100TX); PRINT("auto"); printf("\n"); sc->sc_statchg = tlp_pnic_nway_statchg; sc->sc_tick = tlp_pnic_nway_tick; ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } else { sc->sc_flags |= TULIPF_HAS_MII; sc->sc_tick = tlp_mii_tick; ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } #undef ADD #undef PRINT } void tlp_pnic_tmsw_get(sc, ifmr) struct tulip_softc *sc; struct ifmediareq *ifmr; { struct mii_data *mii = &sc->sc_mii; if (sc->sc_flags & TULIPF_HAS_MII) tlp_mii_getmedia(sc, ifmr); else { mii->mii_media_status = 0; mii->mii_media_active = IFM_NONE; tlp_pnic_nway_service(sc, MII_POLLSTAT); ifmr->ifm_status = sc->sc_mii.mii_media_status; ifmr->ifm_active = sc->sc_mii.mii_media_active; } } int tlp_pnic_tmsw_set(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct mii_data *mii = &sc->sc_mii; if (sc->sc_flags & TULIPF_HAS_MII) { /* * Make sure the built-in Tx jabber timer is disabled. */ TULIP_WRITE(sc, CSR_PNIC_ENDEC, PNIC_ENDEC_JDIS); return (tlp_mii_setmedia(sc)); } if (ifp->if_flags & IFF_UP) { mii->mii_media_status = 0; mii->mii_media_active = IFM_NONE; return (tlp_pnic_nway_service(sc, MII_MEDIACHG)); } return (0); } void tlp_pnic_nway_statchg(self) struct device *self; { struct tulip_softc *sc = (struct tulip_softc *)self; /* Idle the transmit and receive processes. */ tlp_idle(sc, OPMODE_ST|OPMODE_SR); sc->sc_opmode &= ~(OPMODE_TTM|OPMODE_FD|OPMODE_PS|OPMODE_PCS| OPMODE_SCR|OPMODE_HBD); if (IFM_SUBTYPE(sc->sc_mii.mii_media_active) == IFM_10_T) { sc->sc_opmode |= OPMODE_TTM; TULIP_WRITE(sc, CSR_GPP, GPP_PNIC_OUT(GPP_PNIC_PIN_SPEED_RLY, 0) | GPP_PNIC_OUT(GPP_PNIC_PIN_100M_LPKB, 1)); } else { sc->sc_opmode |= OPMODE_PS|OPMODE_PCS|OPMODE_SCR|OPMODE_HBD; TULIP_WRITE(sc, CSR_GPP, GPP_PNIC_OUT(GPP_PNIC_PIN_SPEED_RLY, 1) | GPP_PNIC_OUT(GPP_PNIC_PIN_100M_LPKB, 1)); } if (sc->sc_mii.mii_media_active & IFM_FDX) sc->sc_opmode |= OPMODE_FD|OPMODE_HBD; /* * Write new OPMODE bits. This also restarts the transmit * and receive processes. */ TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode); /* XXX Update ifp->if_baudrate */ } void tlp_pnic_nway_tick(arg) void *arg; { struct tulip_softc *sc = arg; int s; s = splnet(); tlp_pnic_nway_service(sc, MII_TICK); splx(s); timeout(tlp_pnic_nway_tick, sc, hz); } /* * Support for the Lite-On PNIC internal NWay block. This is constructed * somewhat like a PHY driver for simplicity. */ int tlp_pnic_nway_service(sc, cmd) struct tulip_softc *sc; int cmd; { struct mii_data *mii = &sc->sc_mii; struct ifmedia_entry *ife = mii->mii_media.ifm_cur; if ((mii->mii_ifp->if_flags & IFF_UP) == 0) return (0); switch (cmd) { case MII_POLLSTAT: /* Nothing special to do here. */ break; case MII_MEDIACHG: switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_AUTO: (void) tlp_pnic_nway_auto(sc, 1); break; case IFM_100_T4: /* * XXX Not supported as a manual setting right now. */ return (EINVAL); default: /* * NWAY register data is stored in the ifmedia entry. */ TULIP_WRITE(sc, CSR_PNIC_NWAY, ife->ifm_data); } break; case MII_TICK: /* * Only used for autonegotiation. */ if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) return (0); /* * Check to see if we have link. If we do, we don't * need to restart the autonegotiation process. */ if (sc->sc_flags & TULIPF_LINK_UP) return (0); /* * Only retry autonegotiation every 5 seconds. */ if (++sc->sc_nway_ticks != 5) return (0); sc->sc_nway_ticks = 0; tlp_pnic_nway_reset(sc); if (tlp_pnic_nway_auto(sc, 0) == EJUSTRETURN) return (0); break; } /* Update the media status. */ tlp_pnic_nway_status(sc); /* Callback if something changed. */ if ((sc->sc_nway_active == NULL || sc->sc_nway_active->ifm_media != mii->mii_media_active) || cmd == MII_MEDIACHG) { (*sc->sc_statchg)(&sc->sc_dev); tlp_nway_activate(sc, mii->mii_media_active); } return (0); } void tlp_pnic_nway_reset(sc) struct tulip_softc *sc; { TULIP_WRITE(sc, CSR_PNIC_NWAY, PNIC_NWAY_RS); delay(100); TULIP_WRITE(sc, CSR_PNIC_NWAY, 0); } int tlp_pnic_nway_auto(sc, waitfor) struct tulip_softc *sc; int waitfor; { struct mii_data *mii = &sc->sc_mii; struct ifmedia_entry *ife = mii->mii_media.ifm_cur; u_int32_t reg; int i; if ((sc->sc_flags & TULIPF_DOINGAUTO) == 0) TULIP_WRITE(sc, CSR_PNIC_NWAY, ife->ifm_data); if (waitfor) { /* Wait 500ms for it to complete. */ for (i = 0; i < 500; i++) { reg = TULIP_READ(sc, CSR_PNIC_NWAY); if (reg & PNIC_NWAY_LPAR_MASK) { tlp_pnic_nway_acomp(sc); return (0); } delay(1000); } #if 0 if ((reg & PNIC_NWAY_LPAR_MASK) == 0) printf("%s: autonegotiation failed to complete\n", sc->sc_dev.dv_xname); #endif /* * Don't need to worry about clearing DOINGAUTO. * If that's set, a timeout is pending, and it will * clear the flag. */ return (EIO); } /* * Just let it finish asynchronously. This is for the benefit of * the tick handler driving autonegotiation. Don't want 500ms * delays all the time while the system is running! */ if ((sc->sc_flags & TULIPF_DOINGAUTO) == 0) { sc->sc_flags |= TULIPF_DOINGAUTO; timeout(tlp_pnic_nway_auto_timeout, sc, hz >> 1); } return (EJUSTRETURN); } void tlp_pnic_nway_auto_timeout(arg) void *arg; { struct tulip_softc *sc = arg; u_int32_t reg; int s; s = splnet(); sc->sc_flags &= ~TULIPF_DOINGAUTO; reg = TULIP_READ(sc, CSR_PNIC_NWAY); #if 0 if ((reg & PNIC_NWAY_LPAR_MASK) == 0) printf("%s: autonegotiation failed to complete\n", sc->sc_dev.dv_xname); #endif tlp_pnic_nway_acomp(sc); /* Update the media status. */ (void) tlp_pnic_nway_service(sc, MII_POLLSTAT); splx(s); } void tlp_pnic_nway_status(sc) struct tulip_softc *sc; { struct mii_data *mii = &sc->sc_mii; u_int32_t reg; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; reg = TULIP_READ(sc, CSR_PNIC_NWAY); if (sc->sc_flags & TULIPF_LINK_UP) mii->mii_media_status |= IFM_ACTIVE; if (reg & PNIC_NWAY_NW) { if ((reg & PNIC_NWAY_LPAR_MASK) == 0) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } #if 0 if (reg & PNIC_NWAY_LPAR100T4) mii->mii_media_active |= IFM_100_T4; else #endif if (reg & PNIC_NWAY_LPAR100TXFDX) mii->mii_media_active |= IFM_100_TX|IFM_FDX; else if (reg & PNIC_NWAY_LPAR100TX) mii->mii_media_active |= IFM_100_TX; else if (reg & PNIC_NWAY_LPAR10TFDX) mii->mii_media_active |= IFM_10_T|IFM_FDX; else if (reg & PNIC_NWAY_LPAR10T) mii->mii_media_active |= IFM_10_T; else mii->mii_media_active |= IFM_NONE; } else { if (reg & PNIC_NWAY_100) mii->mii_media_active |= IFM_100_TX; else mii->mii_media_active |= IFM_10_T; if (reg & PNIC_NWAY_FD) mii->mii_media_active |= IFM_FDX; } } void tlp_pnic_nway_acomp(sc) struct tulip_softc *sc; { u_int32_t reg; reg = TULIP_READ(sc, CSR_PNIC_NWAY); reg &= ~(PNIC_NWAY_FD|PNIC_NWAY_100|PNIC_NWAY_RN); if (reg & (PNIC_NWAY_LPAR100TXFDX|PNIC_NWAY_LPAR100TX)) reg |= PNIC_NWAY_100; if (reg & (PNIC_NWAY_LPAR10TFDX|PNIC_NWAY_LPAR100TXFDX)) reg |= PNIC_NWAY_FD; TULIP_WRITE(sc, CSR_PNIC_NWAY, reg); } /* * Macronix PMAC and Lite-On PNIC-II media switch: * * MX98713 and MX98713A 21140-like MII or GPIO media. * * MX98713A 21143-like MII or SIA/SYM media. * * MX98715, MX98715A, MX98725, 21143-like SIA/SYM media. * 82C115 * * So, what we do here is fake MII-on-SIO or ISV media info, and * use the ISV media switch get/set functions to handle the rest. */ void tlp_pmac_tmsw_init __P((struct tulip_softc *)); const struct tulip_mediasw tlp_pmac_mediasw = { tlp_pmac_tmsw_init, tlp_2114x_isv_tmsw_get, tlp_2114x_isv_tmsw_set }; const struct tulip_mediasw tlp_pmac_mii_mediasw = { tlp_pmac_tmsw_init, tlp_mii_getmedia, tlp_mii_setmedia }; void tlp_pmac_tmsw_init(sc) struct tulip_softc *sc; { static const u_int8_t media[] = { TULIP_ROM_MB_MEDIA_TP, TULIP_ROM_MB_MEDIA_TP_FDX, TULIP_ROM_MB_MEDIA_100TX, TULIP_ROM_MB_MEDIA_100TX_FDX, }; struct ifnet *ifp = &sc->sc_ethercom.ec_if; sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = tlp_bitbang_mii_readreg; sc->sc_mii.mii_writereg = tlp_bitbang_mii_writereg; sc->sc_mii.mii_statchg = sc->sc_statchg; ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange, tlp_mediastatus); if (sc->sc_chip == TULIP_CHIP_MX98713 || sc->sc_chip == TULIP_CHIP_MX98713A) { mii_phy_probe(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY); if (LIST_FIRST(&sc->sc_mii.mii_phys) != NULL) { sc->sc_flags |= TULIPF_HAS_MII; sc->sc_tick = tlp_mii_tick; sc->sc_preinit = tlp_2114x_mii_preinit; sc->sc_mediasw = &tlp_pmac_mii_mediasw; ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); return; } } switch (sc->sc_chip) { case TULIP_CHIP_MX98713: tlp_add_srom_media(sc, TULIP_ROM_MB_21140_GPR, tlp_21140_gpio_get, tlp_21140_gpio_set, media, 4); /* * XXX Should implement auto-sense for this someday, * XXX when we do the same for the 21140. */ ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T); break; default: tlp_add_srom_media(sc, TULIP_ROM_MB_21142_SIA, tlp_sia_get, tlp_sia_set, media, 2); tlp_add_srom_media(sc, TULIP_ROM_MB_21143_SYM, tlp_sia_get, tlp_sia_set, media + 2, 2); /* * XXX Autonegotiation not yet supported. */ ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_10_T); break; } tlp_print_media(sc); tlp_sia_fixup(sc); /* Set the LED modes. */ tlp_pmac_reset(sc); sc->sc_reset = tlp_pmac_reset; } /* * ADMtek AL981 media switch. Only has internal PHY. */ void tlp_al981_tmsw_init __P((struct tulip_softc *)); const struct tulip_mediasw tlp_al981_mediasw = { tlp_al981_tmsw_init, tlp_mii_getmedia, tlp_mii_setmedia }; void tlp_al981_tmsw_init(sc) struct tulip_softc *sc; { struct ifnet *ifp = &sc->sc_ethercom.ec_if; sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = tlp_al981_mii_readreg; sc->sc_mii.mii_writereg = tlp_al981_mii_writereg; sc->sc_mii.mii_statchg = sc->sc_statchg; ifmedia_init(&sc->sc_mii.mii_media, 0, tlp_mediachange, tlp_mediastatus); mii_phy_probe(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY); if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); } else { sc->sc_flags |= TULIPF_HAS_MII; sc->sc_tick = tlp_mii_tick; ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } }