/* $NetBSD: if_wm.c,v 1.108 2005/10/29 13:24:41 yamt Exp $ */ /* * Copyright (c) 2001, 2002, 2003, 2004 Wasabi Systems, Inc. * All rights reserved. * * Written by Jason R. Thorpe for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Device driver for the Intel i8254x family of Gigabit Ethernet chips. * * TODO (in order of importance): * * - Rework how parameters are loaded from the EEPROM. * - Figure out what to do with the i82545GM and i82546GB * SERDES controllers. * - Fix hw VLAN assist. */ #include __KERNEL_RCSID(0, "$NetBSD: if_wm.c,v 1.108 2005/10/29 13:24:41 yamt Exp $"); #include "bpfilter.h" #include "rnd.h" #include #include #include #include #include #include #include #include #include #include #include #include #include /* for PAGE_SIZE */ #if NRND > 0 #include #endif #include #include #include #include #if NBPFILTER > 0 #include #endif #include /* XXX for struct ip */ #include /* XXX for struct ip */ #include /* XXX for struct ip */ #include /* XXX for struct tcphdr */ #include #include #include #include #include #include #include #include #include #include #ifdef WM_DEBUG #define WM_DEBUG_LINK 0x01 #define WM_DEBUG_TX 0x02 #define WM_DEBUG_RX 0x04 #define WM_DEBUG_GMII 0x08 int wm_debug = WM_DEBUG_TX|WM_DEBUG_RX|WM_DEBUG_LINK; #define DPRINTF(x, y) if (wm_debug & (x)) printf y #else #define DPRINTF(x, y) /* nothing */ #endif /* WM_DEBUG */ /* * Transmit descriptor list size. Due to errata, we can only have * 256 hardware descriptors in the ring on < 82544, but we use 4096 * on >= 82544. We tell the upper layers that they can queue a lot * of packets, and we go ahead and manage up to 64 (16 for the i82547) * of them at a time. * * We allow up to 256 (!) DMA segments per packet. Pathological packet * chains containing many small mbufs have been observed in zero-copy * situations with jumbo frames. */ #define WM_NTXSEGS 256 #define WM_IFQUEUELEN 256 #define WM_TXQUEUELEN_MAX 64 #define WM_TXQUEUELEN_MAX_82547 16 #define WM_TXQUEUELEN(sc) ((sc)->sc_txnum) #define WM_TXQUEUELEN_MASK(sc) (WM_TXQUEUELEN(sc) - 1) #define WM_TXQUEUE_GC(sc) (WM_TXQUEUELEN(sc) / 8) #define WM_NTXDESC_82542 256 #define WM_NTXDESC_82544 4096 #define WM_NTXDESC(sc) ((sc)->sc_ntxdesc) #define WM_NTXDESC_MASK(sc) (WM_NTXDESC(sc) - 1) #define WM_TXDESCSIZE(sc) (WM_NTXDESC(sc) * sizeof(wiseman_txdesc_t)) #define WM_NEXTTX(sc, x) (((x) + 1) & WM_NTXDESC_MASK(sc)) #define WM_NEXTTXS(sc, x) (((x) + 1) & WM_TXQUEUELEN_MASK(sc)) #define WM_MAXTXDMA round_page(IP_MAXPACKET) /* for TSO */ /* * Receive descriptor list size. We have one Rx buffer for normal * sized packets. Jumbo packets consume 5 Rx buffers for a full-sized * packet. We allocate 256 receive descriptors, each with a 2k * buffer (MCLBYTES), which gives us room for 50 jumbo packets. */ #define WM_NRXDESC 256 #define WM_NRXDESC_MASK (WM_NRXDESC - 1) #define WM_NEXTRX(x) (((x) + 1) & WM_NRXDESC_MASK) #define WM_PREVRX(x) (((x) - 1) & WM_NRXDESC_MASK) /* * Control structures are DMA'd to the i82542 chip. We allocate them in * a single clump that maps to a single DMA segment to make several things * easier. */ struct wm_control_data_82544 { /* * The receive descriptors. */ wiseman_rxdesc_t wcd_rxdescs[WM_NRXDESC]; /* * The transmit descriptors. Put these at the end, because * we might use a smaller number of them. */ wiseman_txdesc_t wcd_txdescs[WM_NTXDESC_82544]; }; struct wm_control_data_82542 { wiseman_rxdesc_t wcd_rxdescs[WM_NRXDESC]; wiseman_txdesc_t wcd_txdescs[WM_NTXDESC_82542]; }; #define WM_CDOFF(x) offsetof(struct wm_control_data_82544, x) #define WM_CDTXOFF(x) WM_CDOFF(wcd_txdescs[(x)]) #define WM_CDRXOFF(x) WM_CDOFF(wcd_rxdescs[(x)]) /* * Software state for transmit jobs. */ struct wm_txsoft { struct mbuf *txs_mbuf; /* head of our mbuf chain */ bus_dmamap_t txs_dmamap; /* our DMA map */ int txs_firstdesc; /* first descriptor in packet */ int txs_lastdesc; /* last descriptor in packet */ int txs_ndesc; /* # of descriptors used */ }; /* * Software state for receive buffers. Each descriptor gets a * 2k (MCLBYTES) buffer and a DMA map. For packets which fill * more than one buffer, we chain them together. */ struct wm_rxsoft { struct mbuf *rxs_mbuf; /* head of our mbuf chain */ bus_dmamap_t rxs_dmamap; /* our DMA map */ }; typedef enum { WM_T_unknown = 0, WM_T_82542_2_0, /* i82542 2.0 (really old) */ WM_T_82542_2_1, /* i82542 2.1+ (old) */ WM_T_82543, /* i82543 */ WM_T_82544, /* i82544 */ WM_T_82540, /* i82540 */ WM_T_82545, /* i82545 */ WM_T_82545_3, /* i82545 3.0+ */ WM_T_82546, /* i82546 */ WM_T_82546_3, /* i82546 3.0+ */ WM_T_82541, /* i82541 */ WM_T_82541_2, /* i82541 2.0+ */ WM_T_82547, /* i82547 */ WM_T_82547_2, /* i82547 2.0+ */ } wm_chip_type; /* * Software state per device. */ struct wm_softc { struct device sc_dev; /* generic device information */ bus_space_tag_t sc_st; /* bus space tag */ bus_space_handle_t sc_sh; /* bus space handle */ bus_space_tag_t sc_iot; /* I/O space tag */ bus_space_handle_t sc_ioh; /* I/O space handle */ bus_dma_tag_t sc_dmat; /* bus DMA tag */ struct ethercom sc_ethercom; /* ethernet common data */ void *sc_sdhook; /* shutdown hook */ wm_chip_type sc_type; /* chip type */ int sc_flags; /* flags; see below */ int sc_bus_speed; /* PCI/PCIX bus speed */ int sc_pcix_offset; /* PCIX capability register offset */ int sc_flowflags; /* 802.3x flow control flags */ void *sc_ih; /* interrupt cookie */ int sc_ee_addrbits; /* EEPROM address bits */ struct mii_data sc_mii; /* MII/media information */ struct callout sc_tick_ch; /* tick callout */ bus_dmamap_t sc_cddmamap; /* control data DMA map */ #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr int sc_align_tweak; /* * Software state for the transmit and receive descriptors. */ int sc_txnum; /* must be a power of two */ struct wm_txsoft sc_txsoft[WM_TXQUEUELEN_MAX]; struct wm_rxsoft sc_rxsoft[WM_NRXDESC]; /* * Control data structures. */ int sc_ntxdesc; /* must be a power of two */ struct wm_control_data_82544 *sc_control_data; #define sc_txdescs sc_control_data->wcd_txdescs #define sc_rxdescs sc_control_data->wcd_rxdescs #ifdef WM_EVENT_COUNTERS /* Event counters. */ struct evcnt sc_ev_txsstall; /* Tx stalled due to no txs */ struct evcnt sc_ev_txdstall; /* Tx stalled due to no txd */ struct evcnt sc_ev_txfifo_stall;/* Tx FIFO stalls (82547) */ struct evcnt sc_ev_txdw; /* Tx descriptor interrupts */ struct evcnt sc_ev_txqe; /* Tx queue empty interrupts */ struct evcnt sc_ev_rxintr; /* Rx interrupts */ struct evcnt sc_ev_linkintr; /* Link interrupts */ struct evcnt sc_ev_rxipsum; /* IP checksums checked in-bound */ struct evcnt sc_ev_rxtusum; /* TCP/UDP cksums checked in-bound */ struct evcnt sc_ev_txipsum; /* IP checksums comp. out-bound */ struct evcnt sc_ev_txtusum; /* TCP/UDP cksums comp. out-bound */ struct evcnt sc_ev_txtusum6; /* TCP/UDP v6 cksums comp. out-bound */ struct evcnt sc_ev_txtso; /* TCP seg offload out-bound */ struct evcnt sc_ev_txtsopain; /* painful header manip. for TSO */ struct evcnt sc_ev_txseg[WM_NTXSEGS]; /* Tx packets w/ N segments */ struct evcnt sc_ev_txdrop; /* Tx packets dropped (too many segs) */ struct evcnt sc_ev_tu; /* Tx underrun */ struct evcnt sc_ev_tx_xoff; /* Tx PAUSE(!0) frames */ struct evcnt sc_ev_tx_xon; /* Tx PAUSE(0) frames */ struct evcnt sc_ev_rx_xoff; /* Rx PAUSE(!0) frames */ struct evcnt sc_ev_rx_xon; /* Rx PAUSE(0) frames */ struct evcnt sc_ev_rx_macctl; /* Rx Unsupported */ #endif /* WM_EVENT_COUNTERS */ bus_addr_t sc_tdt_reg; /* offset of TDT register */ int sc_txfree; /* number of free Tx descriptors */ int sc_txnext; /* next ready Tx descriptor */ int sc_txsfree; /* number of free Tx jobs */ int sc_txsnext; /* next free Tx job */ int sc_txsdirty; /* dirty Tx jobs */ /* These 5 variables are used only on the 82547. */ int sc_txfifo_size; /* Tx FIFO size */ int sc_txfifo_head; /* current head of FIFO */ uint32_t sc_txfifo_addr; /* internal address of start of FIFO */ int sc_txfifo_stall; /* Tx FIFO is stalled */ struct callout sc_txfifo_ch; /* Tx FIFO stall work-around timer */ bus_addr_t sc_rdt_reg; /* offset of RDT register */ int sc_rxptr; /* next ready Rx descriptor/queue ent */ int sc_rxdiscard; int sc_rxlen; struct mbuf *sc_rxhead; struct mbuf *sc_rxtail; struct mbuf **sc_rxtailp; uint32_t sc_ctrl; /* prototype CTRL register */ #if 0 uint32_t sc_ctrl_ext; /* prototype CTRL_EXT register */ #endif uint32_t sc_icr; /* prototype interrupt bits */ uint32_t sc_itr; /* prototype intr throttling reg */ uint32_t sc_tctl; /* prototype TCTL register */ uint32_t sc_rctl; /* prototype RCTL register */ uint32_t sc_txcw; /* prototype TXCW register */ uint32_t sc_tipg; /* prototype TIPG register */ uint32_t sc_fcrtl; /* prototype FCRTL register */ uint32_t sc_pba; /* prototype PBA register */ int sc_tbi_linkup; /* TBI link status */ int sc_tbi_anstate; /* autonegotiation state */ int sc_mchash_type; /* multicast filter offset */ #if NRND > 0 rndsource_element_t rnd_source; /* random source */ #endif }; #define WM_RXCHAIN_RESET(sc) \ do { \ (sc)->sc_rxtailp = &(sc)->sc_rxhead; \ *(sc)->sc_rxtailp = NULL; \ (sc)->sc_rxlen = 0; \ } while (/*CONSTCOND*/0) #define WM_RXCHAIN_LINK(sc, m) \ do { \ *(sc)->sc_rxtailp = (sc)->sc_rxtail = (m); \ (sc)->sc_rxtailp = &(m)->m_next; \ } while (/*CONSTCOND*/0) /* sc_flags */ #define WM_F_HAS_MII 0x01 /* has MII */ #define WM_F_EEPROM_HANDSHAKE 0x02 /* requires EEPROM handshake */ #define WM_F_EEPROM_SPI 0x04 /* EEPROM is SPI */ #define WM_F_IOH_VALID 0x10 /* I/O handle is valid */ #define WM_F_BUS64 0x20 /* bus is 64-bit */ #define WM_F_PCIX 0x40 /* bus is PCI-X */ #define WM_F_CSA 0x80 /* bus is CSA */ #ifdef WM_EVENT_COUNTERS #define WM_EVCNT_INCR(ev) (ev)->ev_count++ #define WM_EVCNT_ADD(ev, val) (ev)->ev_count += (val) #else #define WM_EVCNT_INCR(ev) /* nothing */ #define WM_EVCNT_ADD(ev, val) /* nothing */ #endif #define CSR_READ(sc, reg) \ bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg)) #define CSR_WRITE(sc, reg, val) \ bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val)) #define CSR_WRITE_FLUSH(sc) \ (void) CSR_READ((sc), WMREG_STATUS) #define WM_CDTXADDR(sc, x) ((sc)->sc_cddma + WM_CDTXOFF((x))) #define WM_CDRXADDR(sc, x) ((sc)->sc_cddma + WM_CDRXOFF((x))) #define WM_CDTXADDR_LO(sc, x) (WM_CDTXADDR((sc), (x)) & 0xffffffffU) #define WM_CDTXADDR_HI(sc, x) \ (sizeof(bus_addr_t) == 8 ? \ (uint64_t)WM_CDTXADDR((sc), (x)) >> 32 : 0) #define WM_CDRXADDR_LO(sc, x) (WM_CDRXADDR((sc), (x)) & 0xffffffffU) #define WM_CDRXADDR_HI(sc, x) \ (sizeof(bus_addr_t) == 8 ? \ (uint64_t)WM_CDRXADDR((sc), (x)) >> 32 : 0) #define WM_CDTXSYNC(sc, x, n, ops) \ do { \ int __x, __n; \ \ __x = (x); \ __n = (n); \ \ /* If it will wrap around, sync to the end of the ring. */ \ if ((__x + __n) > WM_NTXDESC(sc)) { \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ WM_CDTXOFF(__x), sizeof(wiseman_txdesc_t) * \ (WM_NTXDESC(sc) - __x), (ops)); \ __n -= (WM_NTXDESC(sc) - __x); \ __x = 0; \ } \ \ /* Now sync whatever is left. */ \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ WM_CDTXOFF(__x), sizeof(wiseman_txdesc_t) * __n, (ops)); \ } while (/*CONSTCOND*/0) #define WM_CDRXSYNC(sc, x, ops) \ do { \ bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ WM_CDRXOFF((x)), sizeof(wiseman_rxdesc_t), (ops)); \ } while (/*CONSTCOND*/0) #define WM_INIT_RXDESC(sc, x) \ do { \ struct wm_rxsoft *__rxs = &(sc)->sc_rxsoft[(x)]; \ wiseman_rxdesc_t *__rxd = &(sc)->sc_rxdescs[(x)]; \ struct mbuf *__m = __rxs->rxs_mbuf; \ \ /* \ * Note: We scoot the packet forward 2 bytes in the buffer \ * so that the payload after the Ethernet header is aligned \ * to a 4-byte boundary. \ * \ * XXX BRAINDAMAGE ALERT! \ * The stupid chip uses the same size for every buffer, which \ * is set in the Receive Control register. We are using the 2K \ * size option, but what we REALLY want is (2K - 2)! For this \ * reason, we can't "scoot" packets longer than the standard \ * Ethernet MTU. On strict-alignment platforms, if the total \ * size exceeds (2K - 2) we set align_tweak to 0 and let \ * the upper layer copy the headers. \ */ \ __m->m_data = __m->m_ext.ext_buf + (sc)->sc_align_tweak; \ \ wm_set_dma_addr(&__rxd->wrx_addr, \ __rxs->rxs_dmamap->dm_segs[0].ds_addr + (sc)->sc_align_tweak); \ __rxd->wrx_len = 0; \ __rxd->wrx_cksum = 0; \ __rxd->wrx_status = 0; \ __rxd->wrx_errors = 0; \ __rxd->wrx_special = 0; \ WM_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \ \ CSR_WRITE((sc), (sc)->sc_rdt_reg, (x)); \ } while (/*CONSTCOND*/0) static void wm_start(struct ifnet *); static void wm_watchdog(struct ifnet *); static int wm_ioctl(struct ifnet *, u_long, caddr_t); static int wm_init(struct ifnet *); static void wm_stop(struct ifnet *, int); static void wm_shutdown(void *); static void wm_reset(struct wm_softc *); static void wm_rxdrain(struct wm_softc *); static int wm_add_rxbuf(struct wm_softc *, int); static int wm_read_eeprom(struct wm_softc *, int, int, u_int16_t *); static void wm_tick(void *); static void wm_set_filter(struct wm_softc *); static int wm_intr(void *); static void wm_txintr(struct wm_softc *); static void wm_rxintr(struct wm_softc *); static void wm_linkintr(struct wm_softc *, uint32_t); static void wm_tbi_mediainit(struct wm_softc *); static int wm_tbi_mediachange(struct ifnet *); static void wm_tbi_mediastatus(struct ifnet *, struct ifmediareq *); static void wm_tbi_set_linkled(struct wm_softc *); static void wm_tbi_check_link(struct wm_softc *); static void wm_gmii_reset(struct wm_softc *); static int wm_gmii_i82543_readreg(struct device *, int, int); static void wm_gmii_i82543_writereg(struct device *, int, int, int); static int wm_gmii_i82544_readreg(struct device *, int, int); static void wm_gmii_i82544_writereg(struct device *, int, int, int); static void wm_gmii_statchg(struct device *); static void wm_gmii_mediainit(struct wm_softc *); static int wm_gmii_mediachange(struct ifnet *); static void wm_gmii_mediastatus(struct ifnet *, struct ifmediareq *); static int wm_match(struct device *, struct cfdata *, void *); static void wm_attach(struct device *, struct device *, void *); CFATTACH_DECL(wm, sizeof(struct wm_softc), wm_match, wm_attach, NULL, NULL); static void wm_82547_txfifo_stall(void *); /* * Devices supported by this driver. */ static const struct wm_product { pci_vendor_id_t wmp_vendor; pci_product_id_t wmp_product; const char *wmp_name; wm_chip_type wmp_type; int wmp_flags; #define WMP_F_1000X 0x01 #define WMP_F_1000T 0x02 } wm_products[] = { { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82542, "Intel i82542 1000BASE-X Ethernet", WM_T_82542_2_1, WMP_F_1000X }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82543GC_FIBER, "Intel i82543GC 1000BASE-X Ethernet", WM_T_82543, WMP_F_1000X }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82543GC_COPPER, "Intel i82543GC 1000BASE-T Ethernet", WM_T_82543, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544EI_COPPER, "Intel i82544EI 1000BASE-T Ethernet", WM_T_82544, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544EI_FIBER, "Intel i82544EI 1000BASE-X Ethernet", WM_T_82544, WMP_F_1000X }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544GC_COPPER, "Intel i82544GC 1000BASE-T Ethernet", WM_T_82544, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82544GC_LOM, "Intel i82544GC (LOM) 1000BASE-T Ethernet", WM_T_82544, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EM, "Intel i82540EM 1000BASE-T Ethernet", WM_T_82540, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EM_LOM, "Intel i82540EM (LOM) 1000BASE-T Ethernet", WM_T_82540, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EP_LOM, "Intel i82540EP 1000BASE-T Ethernet", WM_T_82540, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EP, "Intel i82540EP 1000BASE-T Ethernet", WM_T_82540, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82540EP_LP, "Intel i82540EP 1000BASE-T Ethernet", WM_T_82540, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545EM_COPPER, "Intel i82545EM 1000BASE-T Ethernet", WM_T_82545, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545GM_COPPER, "Intel i82545GM 1000BASE-T Ethernet", WM_T_82545_3, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545GM_FIBER, "Intel i82545GM 1000BASE-X Ethernet", WM_T_82545_3, WMP_F_1000X }, #if 0 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545GM_SERDES, "Intel i82545GM Gigabit Ethernet (SERDES)", WM_T_82545_3, WMP_F_SERDES }, #endif { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546EB_COPPER, "Intel i82546EB 1000BASE-T Ethernet", WM_T_82546, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546EB_QUAD, "Intel i82546EB 1000BASE-T Ethernet", WM_T_82546, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82545EM_FIBER, "Intel i82545EM 1000BASE-X Ethernet", WM_T_82545, WMP_F_1000X }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546EB_FIBER, "Intel i82546EB 1000BASE-X Ethernet", WM_T_82546, WMP_F_1000X }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_COPPER, "Intel i82546GB 1000BASE-T Ethernet", WM_T_82546_3, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_FIBER, "Intel i82546GB 1000BASE-X Ethernet", WM_T_82546_3, WMP_F_1000X }, #if 0 { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82546GB_SERDES, "Intel i82546GB Gigabit Ethernet (SERDES)", WM_T_82546_3, WMP_F_SERDES }, #endif { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541EI, "Intel i82541EI 1000BASE-T Ethernet", WM_T_82541, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541EI_MOBILE, "Intel i82541EI Mobile 1000BASE-T Ethernet", WM_T_82541, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541ER, "Intel i82541ER 1000BASE-T Ethernet", WM_T_82541_2, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541GI, "Intel i82541GI 1000BASE-T Ethernet", WM_T_82541_2, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541GI_MOBILE, "Intel i82541GI Mobile 1000BASE-T Ethernet", WM_T_82541_2, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82541PI, "Intel i82541PI 1000BASE-T Ethernet", WM_T_82541_2, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82547EI, "Intel i82547EI 1000BASE-T Ethernet", WM_T_82547, WMP_F_1000T }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82547GI, "Intel i82547GI 1000BASE-T Ethernet", WM_T_82547_2, WMP_F_1000T }, { 0, 0, NULL, 0, 0 }, }; #ifdef WM_EVENT_COUNTERS static char wm_txseg_evcnt_names[WM_NTXSEGS][sizeof("txsegXXX")]; #endif /* WM_EVENT_COUNTERS */ #if 0 /* Not currently used */ static __inline uint32_t wm_io_read(struct wm_softc *sc, int reg) { bus_space_write_4(sc->sc_iot, sc->sc_ioh, 0, reg); return (bus_space_read_4(sc->sc_iot, sc->sc_ioh, 4)); } #endif static __inline void wm_io_write(struct wm_softc *sc, int reg, uint32_t val) { bus_space_write_4(sc->sc_iot, sc->sc_ioh, 0, reg); bus_space_write_4(sc->sc_iot, sc->sc_ioh, 4, val); } static __inline void wm_set_dma_addr(__volatile wiseman_addr_t *wa, bus_addr_t v) { wa->wa_low = htole32(v & 0xffffffffU); if (sizeof(bus_addr_t) == 8) wa->wa_high = htole32((uint64_t) v >> 32); else wa->wa_high = 0; } static const struct wm_product * wm_lookup(const struct pci_attach_args *pa) { const struct wm_product *wmp; for (wmp = wm_products; wmp->wmp_name != NULL; wmp++) { if (PCI_VENDOR(pa->pa_id) == wmp->wmp_vendor && PCI_PRODUCT(pa->pa_id) == wmp->wmp_product) return (wmp); } return (NULL); } static int wm_match(struct device *parent, struct cfdata *cf, void *aux) { struct pci_attach_args *pa = aux; if (wm_lookup(pa) != NULL) return (1); return (0); } static void wm_attach(struct device *parent, struct device *self, void *aux) { struct wm_softc *sc = (void *) self; struct pci_attach_args *pa = aux; struct ifnet *ifp = &sc->sc_ethercom.ec_if; pci_chipset_tag_t pc = pa->pa_pc; pci_intr_handle_t ih; size_t cdata_size; const char *intrstr = NULL; const char *eetype; bus_space_tag_t memt; bus_space_handle_t memh; bus_dma_segment_t seg; int memh_valid; int i, rseg, error; const struct wm_product *wmp; uint8_t enaddr[ETHER_ADDR_LEN]; uint16_t myea[ETHER_ADDR_LEN / 2], cfg1, cfg2, swdpin; pcireg_t preg, memtype; uint32_t reg; int pmreg; callout_init(&sc->sc_tick_ch); wmp = wm_lookup(pa); if (wmp == NULL) { printf("\n"); panic("wm_attach: impossible"); } if (pci_dma64_available(pa)) sc->sc_dmat = pa->pa_dmat64; else sc->sc_dmat = pa->pa_dmat; preg = PCI_REVISION(pci_conf_read(pc, pa->pa_tag, PCI_CLASS_REG)); aprint_naive(": Ethernet controller\n"); aprint_normal(": %s, rev. %d\n", wmp->wmp_name, preg); sc->sc_type = wmp->wmp_type; if (sc->sc_type < WM_T_82543) { if (preg < 2) { aprint_error("%s: i82542 must be at least rev. 2\n", sc->sc_dev.dv_xname); return; } if (preg < 3) sc->sc_type = WM_T_82542_2_0; } /* * Map the device. All devices support memory-mapped acccess, * and it is really required for normal operation. */ memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, WM_PCI_MMBA); switch (memtype) { case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT: case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT: memh_valid = (pci_mapreg_map(pa, WM_PCI_MMBA, memtype, 0, &memt, &memh, NULL, NULL) == 0); break; default: memh_valid = 0; } if (memh_valid) { sc->sc_st = memt; sc->sc_sh = memh; } else { aprint_error("%s: unable to map device registers\n", sc->sc_dev.dv_xname); return; } /* * In addition, i82544 and later support I/O mapped indirect * register access. It is not desirable (nor supported in * this driver) to use it for normal operation, though it is * required to work around bugs in some chip versions. */ if (sc->sc_type >= WM_T_82544) { /* First we have to find the I/O BAR. */ for (i = PCI_MAPREG_START; i < PCI_MAPREG_END; i += 4) { if (pci_mapreg_type(pa->pa_pc, pa->pa_tag, i) == PCI_MAPREG_TYPE_IO) break; } if (i == PCI_MAPREG_END) aprint_error("%s: WARNING: unable to find I/O BAR\n", sc->sc_dev.dv_xname); else { /* * The i8254x doesn't apparently respond when the * I/O BAR is 0, which looks somewhat like it's not * been configured. */ preg = pci_conf_read(pc, pa->pa_tag, i); if (PCI_MAPREG_MEM_ADDR(preg) == 0) { aprint_error("%s: WARNING: I/O BAR at zero.\n", sc->sc_dev.dv_xname); } else if (pci_mapreg_map(pa, i, PCI_MAPREG_TYPE_IO, 0, &sc->sc_iot, &sc->sc_ioh, NULL, NULL) == 0) { sc->sc_flags |= WM_F_IOH_VALID; } else { aprint_error("%s: WARNING: unable to map " "I/O space\n", sc->sc_dev.dv_xname); } } } /* Enable bus mastering. Disable MWI on the i82542 2.0. */ preg = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); preg |= PCI_COMMAND_MASTER_ENABLE; if (sc->sc_type < WM_T_82542_2_1) preg &= ~PCI_COMMAND_INVALIDATE_ENABLE; pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, preg); /* Get it out of power save mode, if needed. */ if (pci_get_capability(pc, pa->pa_tag, PCI_CAP_PWRMGMT, &pmreg, 0)) { preg = pci_conf_read(pc, pa->pa_tag, pmreg + PCI_PMCSR) & PCI_PMCSR_STATE_MASK; if (preg == PCI_PMCSR_STATE_D3) { /* * The card has lost all configuration data in * this state, so punt. */ aprint_error("%s: unable to wake from power state D3\n", sc->sc_dev.dv_xname); return; } if (preg != PCI_PMCSR_STATE_D0) { aprint_normal("%s: waking up from power state D%d\n", sc->sc_dev.dv_xname, preg); pci_conf_write(pc, pa->pa_tag, pmreg + PCI_PMCSR, PCI_PMCSR_STATE_D0); } } /* * Map and establish our interrupt. */ if (pci_intr_map(pa, &ih)) { aprint_error("%s: unable to map interrupt\n", sc->sc_dev.dv_xname); return; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, wm_intr, sc); if (sc->sc_ih == NULL) { aprint_error("%s: unable to establish interrupt", sc->sc_dev.dv_xname); if (intrstr != NULL) aprint_normal(" at %s", intrstr); aprint_normal("\n"); return; } aprint_normal("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr); /* * Determine a few things about the bus we're connected to. */ if (sc->sc_type < WM_T_82543) { /* We don't really know the bus characteristics here. */ sc->sc_bus_speed = 33; } else if (sc->sc_type == WM_T_82547 || sc->sc_type == WM_T_82547_2) { /* * CSA (Communication Streaming Architecture) is about as fast * a 32-bit 66MHz PCI Bus. */ sc->sc_flags |= WM_F_CSA; sc->sc_bus_speed = 66; aprint_verbose("%s: Communication Streaming Architecture\n", sc->sc_dev.dv_xname); if (sc->sc_type == WM_T_82547) { callout_init(&sc->sc_txfifo_ch); callout_setfunc(&sc->sc_txfifo_ch, wm_82547_txfifo_stall, sc); aprint_verbose("%s: using 82547 Tx FIFO stall " "work-around\n", sc->sc_dev.dv_xname); } } else { reg = CSR_READ(sc, WMREG_STATUS); if (reg & STATUS_BUS64) sc->sc_flags |= WM_F_BUS64; if (sc->sc_type >= WM_T_82544 && (reg & STATUS_PCIX_MODE) != 0) { pcireg_t pcix_cmd, pcix_sts, bytecnt, maxb; sc->sc_flags |= WM_F_PCIX; if (pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_PCIX, &sc->sc_pcix_offset, NULL) == 0) aprint_error("%s: unable to find PCIX " "capability\n", sc->sc_dev.dv_xname); else if (sc->sc_type != WM_T_82545_3 && sc->sc_type != WM_T_82546_3) { /* * Work around a problem caused by the BIOS * setting the max memory read byte count * incorrectly. */ pcix_cmd = pci_conf_read(pa->pa_pc, pa->pa_tag, sc->sc_pcix_offset + PCI_PCIX_CMD); pcix_sts = pci_conf_read(pa->pa_pc, pa->pa_tag, sc->sc_pcix_offset + PCI_PCIX_STATUS); bytecnt = (pcix_cmd & PCI_PCIX_CMD_BYTECNT_MASK) >> PCI_PCIX_CMD_BYTECNT_SHIFT; maxb = (pcix_sts & PCI_PCIX_STATUS_MAXB_MASK) >> PCI_PCIX_STATUS_MAXB_SHIFT; if (bytecnt > maxb) { aprint_verbose("%s: resetting PCI-X " "MMRBC: %d -> %d\n", sc->sc_dev.dv_xname, 512 << bytecnt, 512 << maxb); pcix_cmd = (pcix_cmd & ~PCI_PCIX_CMD_BYTECNT_MASK) | (maxb << PCI_PCIX_CMD_BYTECNT_SHIFT); pci_conf_write(pa->pa_pc, pa->pa_tag, sc->sc_pcix_offset + PCI_PCIX_CMD, pcix_cmd); } } } /* * The quad port adapter is special; it has a PCIX-PCIX * bridge on the board, and can run the secondary bus at * a higher speed. */ if (wmp->wmp_product == PCI_PRODUCT_INTEL_82546EB_QUAD) { sc->sc_bus_speed = (sc->sc_flags & WM_F_PCIX) ? 120 : 66; } else if (sc->sc_flags & WM_F_PCIX) { switch (reg & STATUS_PCIXSPD_MASK) { case STATUS_PCIXSPD_50_66: sc->sc_bus_speed = 66; break; case STATUS_PCIXSPD_66_100: sc->sc_bus_speed = 100; break; case STATUS_PCIXSPD_100_133: sc->sc_bus_speed = 133; break; default: aprint_error( "%s: unknown PCIXSPD %d; assuming 66MHz\n", sc->sc_dev.dv_xname, reg & STATUS_PCIXSPD_MASK); sc->sc_bus_speed = 66; } } else sc->sc_bus_speed = (reg & STATUS_PCI66) ? 66 : 33; aprint_verbose("%s: %d-bit %dMHz %s bus\n", sc->sc_dev.dv_xname, (sc->sc_flags & WM_F_BUS64) ? 64 : 32, sc->sc_bus_speed, (sc->sc_flags & WM_F_PCIX) ? "PCIX" : "PCI"); } /* * Allocate the control data structures, and create and load the * DMA map for it. * * NOTE: All Tx descriptors must be in the same 4G segment of * memory. So must Rx descriptors. We simplify by allocating * both sets within the same 4G segment. */ WM_NTXDESC(sc) = sc->sc_type < WM_T_82544 ? WM_NTXDESC_82542 : WM_NTXDESC_82544; cdata_size = sc->sc_type < WM_T_82544 ? sizeof(struct wm_control_data_82542) : sizeof(struct wm_control_data_82544); if ((error = bus_dmamem_alloc(sc->sc_dmat, cdata_size, PAGE_SIZE, (bus_size_t) 0x100000000ULL, &seg, 1, &rseg, 0)) != 0) { aprint_error( "%s: unable to allocate control data, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_0; } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, cdata_size, (caddr_t *)&sc->sc_control_data, 0)) != 0) { aprint_error("%s: unable to map control data, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_1; } if ((error = bus_dmamap_create(sc->sc_dmat, cdata_size, 1, cdata_size, 0, 0, &sc->sc_cddmamap)) != 0) { aprint_error("%s: unable to create control data DMA map, " "error = %d\n", sc->sc_dev.dv_xname, error); goto fail_2; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, sc->sc_control_data, cdata_size, NULL, 0)) != 0) { aprint_error( "%s: unable to load control data DMA map, error = %d\n", sc->sc_dev.dv_xname, error); goto fail_3; } /* * Create the transmit buffer DMA maps. */ WM_TXQUEUELEN(sc) = (sc->sc_type == WM_T_82547 || sc->sc_type == WM_T_82547_2) ? WM_TXQUEUELEN_MAX_82547 : WM_TXQUEUELEN_MAX; for (i = 0; i < WM_TXQUEUELEN(sc); i++) { if ((error = bus_dmamap_create(sc->sc_dmat, WM_MAXTXDMA, WM_NTXSEGS, WTX_MAX_LEN, 0, 0, &sc->sc_txsoft[i].txs_dmamap)) != 0) { aprint_error("%s: unable to create Tx DMA map %d, " "error = %d\n", sc->sc_dev.dv_xname, i, error); goto fail_4; } } /* * Create the receive buffer DMA maps. */ for (i = 0; i < WM_NRXDESC; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) { aprint_error("%s: unable to create Rx DMA map %d, " "error = %d\n", sc->sc_dev.dv_xname, i, error); goto fail_5; } sc->sc_rxsoft[i].rxs_mbuf = NULL; } /* * Reset the chip to a known state. */ wm_reset(sc); /* * Get some information about the EEPROM. */ if (sc->sc_type >= WM_T_82540) sc->sc_flags |= WM_F_EEPROM_HANDSHAKE; if (sc->sc_type <= WM_T_82544) sc->sc_ee_addrbits = 6; else if (sc->sc_type <= WM_T_82546_3) { reg = CSR_READ(sc, WMREG_EECD); if (reg & EECD_EE_SIZE) sc->sc_ee_addrbits = 8; else sc->sc_ee_addrbits = 6; } else if (sc->sc_type <= WM_T_82547_2) { reg = CSR_READ(sc, WMREG_EECD); if (reg & EECD_EE_TYPE) { sc->sc_flags |= WM_F_EEPROM_SPI; sc->sc_ee_addrbits = (reg & EECD_EE_ABITS) ? 16 : 8; } else sc->sc_ee_addrbits = (reg & EECD_EE_ABITS) ? 8 : 6; } else { /* Assume everything else is SPI. */ reg = CSR_READ(sc, WMREG_EECD); sc->sc_flags |= WM_F_EEPROM_SPI; sc->sc_ee_addrbits = (reg & EECD_EE_ABITS) ? 16 : 8; } if (sc->sc_flags & WM_F_EEPROM_SPI) eetype = "SPI"; else eetype = "MicroWire"; aprint_verbose("%s: %u word (%d address bits) %s EEPROM\n", sc->sc_dev.dv_xname, 1U << sc->sc_ee_addrbits, sc->sc_ee_addrbits, eetype); /* * Read the Ethernet address from the EEPROM. */ if (wm_read_eeprom(sc, EEPROM_OFF_MACADDR, sizeof(myea) / sizeof(myea[0]), myea)) { aprint_error("%s: unable to read Ethernet address\n", sc->sc_dev.dv_xname); return; } enaddr[0] = myea[0] & 0xff; enaddr[1] = myea[0] >> 8; enaddr[2] = myea[1] & 0xff; enaddr[3] = myea[1] >> 8; enaddr[4] = myea[2] & 0xff; enaddr[5] = myea[2] >> 8; /* * Toggle the LSB of the MAC address on the second port * of the i82546. */ if (sc->sc_type == WM_T_82546 || sc->sc_type == WM_T_82546_3) { if ((CSR_READ(sc, WMREG_STATUS) >> STATUS_FUNCID_SHIFT) & 1) enaddr[5] ^= 1; } aprint_normal("%s: Ethernet address %s\n", sc->sc_dev.dv_xname, ether_sprintf(enaddr)); /* * Read the config info from the EEPROM, and set up various * bits in the control registers based on their contents. */ if (wm_read_eeprom(sc, EEPROM_OFF_CFG1, 1, &cfg1)) { aprint_error("%s: unable to read CFG1 from EEPROM\n", sc->sc_dev.dv_xname); return; } if (wm_read_eeprom(sc, EEPROM_OFF_CFG2, 1, &cfg2)) { aprint_error("%s: unable to read CFG2 from EEPROM\n", sc->sc_dev.dv_xname); return; } if (sc->sc_type >= WM_T_82544) { if (wm_read_eeprom(sc, EEPROM_OFF_SWDPIN, 1, &swdpin)) { aprint_error("%s: unable to read SWDPIN from EEPROM\n", sc->sc_dev.dv_xname); return; } } if (cfg1 & EEPROM_CFG1_ILOS) sc->sc_ctrl |= CTRL_ILOS; if (sc->sc_type >= WM_T_82544) { sc->sc_ctrl |= ((swdpin >> EEPROM_SWDPIN_SWDPIO_SHIFT) & 0xf) << CTRL_SWDPIO_SHIFT; sc->sc_ctrl |= ((swdpin >> EEPROM_SWDPIN_SWDPIN_SHIFT) & 0xf) << CTRL_SWDPINS_SHIFT; } else { sc->sc_ctrl |= ((cfg1 >> EEPROM_CFG1_SWDPIO_SHIFT) & 0xf) << CTRL_SWDPIO_SHIFT; } #if 0 if (sc->sc_type >= WM_T_82544) { if (cfg1 & EEPROM_CFG1_IPS0) sc->sc_ctrl_ext |= CTRL_EXT_IPS; if (cfg1 & EEPROM_CFG1_IPS1) sc->sc_ctrl_ext |= CTRL_EXT_IPS1; sc->sc_ctrl_ext |= ((swdpin >> (EEPROM_SWDPIN_SWDPIO_SHIFT + 4)) & 0xd) << CTRL_EXT_SWDPIO_SHIFT; sc->sc_ctrl_ext |= ((swdpin >> (EEPROM_SWDPIN_SWDPIN_SHIFT + 4)) & 0xd) << CTRL_EXT_SWDPINS_SHIFT; } else { sc->sc_ctrl_ext |= ((cfg2 >> EEPROM_CFG2_SWDPIO_SHIFT) & 0xf) << CTRL_EXT_SWDPIO_SHIFT; } #endif CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); #if 0 CSR_WRITE(sc, WMREG_CTRL_EXT, sc->sc_ctrl_ext); #endif /* * Set up some register offsets that are different between * the i82542 and the i82543 and later chips. */ if (sc->sc_type < WM_T_82543) { sc->sc_rdt_reg = WMREG_OLD_RDT0; sc->sc_tdt_reg = WMREG_OLD_TDT; } else { sc->sc_rdt_reg = WMREG_RDT; sc->sc_tdt_reg = WMREG_TDT; } /* * Determine if we're TBI or GMII mode, and initialize the * media structures accordingly. */ if (sc->sc_type < WM_T_82543 || (CSR_READ(sc, WMREG_STATUS) & STATUS_TBIMODE) != 0) { if (wmp->wmp_flags & WMP_F_1000T) aprint_error("%s: WARNING: TBIMODE set on 1000BASE-T " "product!\n", sc->sc_dev.dv_xname); wm_tbi_mediainit(sc); } else { if (wmp->wmp_flags & WMP_F_1000X) aprint_error("%s: WARNING: TBIMODE clear on 1000BASE-X " "product!\n", sc->sc_dev.dv_xname); wm_gmii_mediainit(sc); } ifp = &sc->sc_ethercom.ec_if; strcpy(ifp->if_xname, sc->sc_dev.dv_xname); ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = wm_ioctl; ifp->if_start = wm_start; ifp->if_watchdog = wm_watchdog; ifp->if_init = wm_init; ifp->if_stop = wm_stop; IFQ_SET_MAXLEN(&ifp->if_snd, max(WM_IFQUEUELEN, IFQ_MAXLEN)); IFQ_SET_READY(&ifp->if_snd); sc->sc_ethercom.ec_capabilities |= ETHERCAP_JUMBO_MTU; /* * If we're a i82543 or greater, we can support VLANs. */ if (sc->sc_type >= WM_T_82543) sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU /* XXXJRT | ETHERCAP_VLAN_HWTAGGING */; /* * We can perform TCPv4 and UDPv4 checkums in-bound. Only * on i82543 and later. */ if (sc->sc_type >= WM_T_82543) ifp->if_capabilities |= IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx | IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx | IFCAP_CSUM_TCPv6_Tx | IFCAP_CSUM_UDPv6_Tx; /* * If we're a i82544 or greater (except i82547), we can do * TCP segmentation offload. */ if (sc->sc_type >= WM_T_82544 && sc->sc_type != WM_T_82547) ifp->if_capabilities |= IFCAP_TSOv4; /* * Attach the interface. */ if_attach(ifp); ether_ifattach(ifp, enaddr); #if NRND > 0 rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname, RND_TYPE_NET, 0); #endif #ifdef WM_EVENT_COUNTERS /* Attach event counters. */ evcnt_attach_dynamic(&sc->sc_ev_txsstall, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txsstall"); evcnt_attach_dynamic(&sc->sc_ev_txdstall, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txdstall"); evcnt_attach_dynamic(&sc->sc_ev_txfifo_stall, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txfifo_stall"); evcnt_attach_dynamic(&sc->sc_ev_txdw, EVCNT_TYPE_INTR, NULL, sc->sc_dev.dv_xname, "txdw"); evcnt_attach_dynamic(&sc->sc_ev_txqe, EVCNT_TYPE_INTR, NULL, sc->sc_dev.dv_xname, "txqe"); evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR, NULL, sc->sc_dev.dv_xname, "rxintr"); evcnt_attach_dynamic(&sc->sc_ev_linkintr, EVCNT_TYPE_INTR, NULL, sc->sc_dev.dv_xname, "linkintr"); evcnt_attach_dynamic(&sc->sc_ev_rxipsum, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "rxipsum"); evcnt_attach_dynamic(&sc->sc_ev_rxtusum, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "rxtusum"); evcnt_attach_dynamic(&sc->sc_ev_txipsum, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txipsum"); evcnt_attach_dynamic(&sc->sc_ev_txtusum, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txtusum"); evcnt_attach_dynamic(&sc->sc_ev_txtusum6, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txtusum6"); evcnt_attach_dynamic(&sc->sc_ev_txtso, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txtso"); evcnt_attach_dynamic(&sc->sc_ev_txtsopain, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txtsopain"); for (i = 0; i < WM_NTXSEGS; i++) { sprintf(wm_txseg_evcnt_names[i], "txseg%d", i); evcnt_attach_dynamic(&sc->sc_ev_txseg[i], EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, wm_txseg_evcnt_names[i]); } evcnt_attach_dynamic(&sc->sc_ev_txdrop, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "txdrop"); evcnt_attach_dynamic(&sc->sc_ev_tu, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "tu"); evcnt_attach_dynamic(&sc->sc_ev_tx_xoff, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "tx_xoff"); evcnt_attach_dynamic(&sc->sc_ev_tx_xon, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "tx_xon"); evcnt_attach_dynamic(&sc->sc_ev_rx_xoff, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "rx_xoff"); evcnt_attach_dynamic(&sc->sc_ev_rx_xon, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "rx_xon"); evcnt_attach_dynamic(&sc->sc_ev_rx_macctl, EVCNT_TYPE_MISC, NULL, sc->sc_dev.dv_xname, "rx_macctl"); #endif /* WM_EVENT_COUNTERS */ /* * Make sure the interface is shutdown during reboot. */ sc->sc_sdhook = shutdownhook_establish(wm_shutdown, sc); if (sc->sc_sdhook == NULL) aprint_error("%s: WARNING: unable to establish shutdown hook\n", sc->sc_dev.dv_xname); return; /* * Free any resources we've allocated during the failed attach * attempt. Do this in reverse order and fall through. */ fail_5: for (i = 0; i < WM_NRXDESC; i++) { if (sc->sc_rxsoft[i].rxs_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxsoft[i].rxs_dmamap); } fail_4: for (i = 0; i < WM_TXQUEUELEN(sc); i++) { if (sc->sc_txsoft[i].txs_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->sc_txsoft[i].txs_dmamap); } bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); fail_3: bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); fail_2: bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data, cdata_size); fail_1: bus_dmamem_free(sc->sc_dmat, &seg, rseg); fail_0: return; } /* * wm_shutdown: * * Make sure the interface is stopped at reboot time. */ static void wm_shutdown(void *arg) { struct wm_softc *sc = arg; wm_stop(&sc->sc_ethercom.ec_if, 1); } /* * wm_tx_offload: * * Set up TCP/IP checksumming parameters for the * specified packet. */ static int wm_tx_offload(struct wm_softc *sc, struct wm_txsoft *txs, uint32_t *cmdp, uint8_t *fieldsp) { struct mbuf *m0 = txs->txs_mbuf; struct livengood_tcpip_ctxdesc *t; uint32_t ipcs, tucs, cmd, cmdlen, seg; struct ether_header *eh; int offset, iphl; uint8_t fields; /* * XXX It would be nice if the mbuf pkthdr had offset * fields for the protocol headers. */ eh = mtod(m0, struct ether_header *); switch (htons(eh->ether_type)) { case ETHERTYPE_IP: case ETHERTYPE_IPV6: offset = ETHER_HDR_LEN; break; case ETHERTYPE_VLAN: offset = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN; break; default: /* * Don't support this protocol or encapsulation. */ *fieldsp = 0; *cmdp = 0; return (0); } if ((m0->m_pkthdr.csum_flags & (M_CSUM_TSOv4|M_CSUM_UDPv4|M_CSUM_TCPv4)) != 0) { iphl = M_CSUM_DATA_IPv4_IPHL(m0->m_pkthdr.csum_data); } else { iphl = M_CSUM_DATA_IPv6_HL(m0->m_pkthdr.csum_data); } cmd = WTX_CMD_DEXT | WTX_DTYP_D; cmdlen = WTX_CMD_DEXT | WTX_DTYP_C | WTX_CMD_IDE; seg = 0; fields = 0; if (m0->m_pkthdr.csum_flags & M_CSUM_TSOv4) { int hlen = offset + iphl; WM_EVCNT_INCR(&sc->sc_ev_txtso); if (__predict_false(m0->m_len < (hlen + sizeof(struct tcphdr)))) { /* * TCP/IP headers are not in the first mbuf; we need * to do this the slow and painful way. Let's just * hope this doesn't happen very often. */ struct ip ip; struct tcphdr th; WM_EVCNT_INCR(&sc->sc_ev_txtsopain); m_copydata(m0, offset, sizeof(ip), &ip); m_copydata(m0, hlen, sizeof(th), &th); ip.ip_len = 0; m_copyback(m0, hlen + offsetof(struct ip, ip_len), sizeof(ip.ip_len), &ip.ip_len); th.th_sum = in_cksum_phdr(ip.ip_src.s_addr, ip.ip_dst.s_addr, htons(IPPROTO_TCP)); m_copyback(m0, hlen + offsetof(struct tcphdr, th_sum), sizeof(th.th_sum), &th.th_sum); hlen += th.th_off << 2; } else { /* * TCP/IP headers are in the first mbuf; we can do * this the easy way. */ struct ip *ip = (struct ip *) (mtod(m0, caddr_t) + offset); struct tcphdr *th = (struct tcphdr *) (mtod(m0, caddr_t) + hlen); ip->ip_len = 0; th->th_sum = in_cksum_phdr(ip->ip_src.s_addr, ip->ip_dst.s_addr, htons(IPPROTO_TCP)); hlen += th->th_off << 2; } cmd |= WTX_TCPIP_CMD_TSE; cmdlen |= WTX_TCPIP_CMD_TSE | WTX_TCPIP_CMD_IP | WTX_TCPIP_CMD_TCP | (m0->m_pkthdr.len - hlen); seg = WTX_TCPIP_SEG_HDRLEN(hlen) | WTX_TCPIP_SEG_MSS(m0->m_pkthdr.segsz); } /* * NOTE: Even if we're not using the IP or TCP/UDP checksum * offload feature, if we load the context descriptor, we * MUST provide valid values for IPCSS and TUCSS fields. */ ipcs = WTX_TCPIP_IPCSS(offset) | WTX_TCPIP_IPCSO(offset + offsetof(struct ip, ip_sum)) | WTX_TCPIP_IPCSE(offset + iphl - 1); if (m0->m_pkthdr.csum_flags & (M_CSUM_IPv4|M_CSUM_TSOv4)) { WM_EVCNT_INCR(&sc->sc_ev_txipsum); fields |= WTX_IXSM; } offset += iphl; if (m0->m_pkthdr.csum_flags & (M_CSUM_TCPv4|M_CSUM_UDPv4|M_CSUM_TSOv4)) { WM_EVCNT_INCR(&sc->sc_ev_txtusum); fields |= WTX_TXSM; tucs = WTX_TCPIP_TUCSS(offset) | WTX_TCPIP_TUCSO(offset + M_CSUM_DATA_IPv4_OFFSET(m0->m_pkthdr.csum_data)) | WTX_TCPIP_TUCSE(0) /* rest of packet */; } else if ((m0->m_pkthdr.csum_flags & (M_CSUM_TCPv6|M_CSUM_UDPv6)) != 0) { WM_EVCNT_INCR(&sc->sc_ev_txtusum6); fields |= WTX_TXSM; tucs = WTX_TCPIP_TUCSS(offset) | WTX_TCPIP_TUCSO(offset + M_CSUM_DATA_IPv6_OFFSET(m0->m_pkthdr.csum_data)) | WTX_TCPIP_TUCSE(0) /* rest of packet */; } else { /* Just initialize it to a valid TCP context. */ tucs = WTX_TCPIP_TUCSS(offset) | WTX_TCPIP_TUCSO(offset + offsetof(struct tcphdr, th_sum)) | WTX_TCPIP_TUCSE(0) /* rest of packet */; } /* Fill in the context descriptor. */ t = (struct livengood_tcpip_ctxdesc *) &sc->sc_txdescs[sc->sc_txnext]; t->tcpip_ipcs = htole32(ipcs); t->tcpip_tucs = htole32(tucs); t->tcpip_cmdlen = htole32(cmdlen); t->tcpip_seg = htole32(seg); WM_CDTXSYNC(sc, sc->sc_txnext, 1, BUS_DMASYNC_PREWRITE); sc->sc_txnext = WM_NEXTTX(sc, sc->sc_txnext); txs->txs_ndesc++; *cmdp = cmd; *fieldsp = fields; return (0); } static void wm_dump_mbuf_chain(struct wm_softc *sc, struct mbuf *m0) { struct mbuf *m; int i; log(LOG_DEBUG, "%s: mbuf chain:\n", sc->sc_dev.dv_xname); for (m = m0, i = 0; m != NULL; m = m->m_next, i++) log(LOG_DEBUG, "%s:\tm_data = %p, m_len = %d, " "m_flags = 0x%08x\n", sc->sc_dev.dv_xname, m->m_data, m->m_len, m->m_flags); log(LOG_DEBUG, "%s:\t%d mbuf%s in chain\n", sc->sc_dev.dv_xname, i, i == 1 ? "" : "s"); } /* * wm_82547_txfifo_stall: * * Callout used to wait for the 82547 Tx FIFO to drain, * reset the FIFO pointers, and restart packet transmission. */ static void wm_82547_txfifo_stall(void *arg) { struct wm_softc *sc = arg; int s; s = splnet(); if (sc->sc_txfifo_stall) { if (CSR_READ(sc, WMREG_TDT) == CSR_READ(sc, WMREG_TDH) && CSR_READ(sc, WMREG_TDFT) == CSR_READ(sc, WMREG_TDFH) && CSR_READ(sc, WMREG_TDFTS) == CSR_READ(sc, WMREG_TDFHS)) { /* * Packets have drained. Stop transmitter, reset * FIFO pointers, restart transmitter, and kick * the packet queue. */ uint32_t tctl = CSR_READ(sc, WMREG_TCTL); CSR_WRITE(sc, WMREG_TCTL, tctl & ~TCTL_EN); CSR_WRITE(sc, WMREG_TDFT, sc->sc_txfifo_addr); CSR_WRITE(sc, WMREG_TDFH, sc->sc_txfifo_addr); CSR_WRITE(sc, WMREG_TDFTS, sc->sc_txfifo_addr); CSR_WRITE(sc, WMREG_TDFHS, sc->sc_txfifo_addr); CSR_WRITE(sc, WMREG_TCTL, tctl); CSR_WRITE_FLUSH(sc); sc->sc_txfifo_head = 0; sc->sc_txfifo_stall = 0; wm_start(&sc->sc_ethercom.ec_if); } else { /* * Still waiting for packets to drain; try again in * another tick. */ callout_schedule(&sc->sc_txfifo_ch, 1); } } splx(s); } /* * wm_82547_txfifo_bugchk: * * Check for bug condition in the 82547 Tx FIFO. We need to * prevent enqueueing a packet that would wrap around the end * if the Tx FIFO ring buffer, otherwise the chip will croak. * * We do this by checking the amount of space before the end * of the Tx FIFO buffer. If the packet will not fit, we "stall" * the Tx FIFO, wait for all remaining packets to drain, reset * the internal FIFO pointers to the beginning, and restart * transmission on the interface. */ #define WM_FIFO_HDR 0x10 #define WM_82547_PAD_LEN 0x3e0 static int wm_82547_txfifo_bugchk(struct wm_softc *sc, struct mbuf *m0) { int space = sc->sc_txfifo_size - sc->sc_txfifo_head; int len = roundup(m0->m_pkthdr.len + WM_FIFO_HDR, WM_FIFO_HDR); /* Just return if already stalled. */ if (sc->sc_txfifo_stall) return (1); if (sc->sc_mii.mii_media_active & IFM_FDX) { /* Stall only occurs in half-duplex mode. */ goto send_packet; } if (len >= WM_82547_PAD_LEN + space) { sc->sc_txfifo_stall = 1; callout_schedule(&sc->sc_txfifo_ch, 1); return (1); } send_packet: sc->sc_txfifo_head += len; if (sc->sc_txfifo_head >= sc->sc_txfifo_size) sc->sc_txfifo_head -= sc->sc_txfifo_size; return (0); } /* * wm_start: [ifnet interface function] * * Start packet transmission on the interface. */ static void wm_start(struct ifnet *ifp) { struct wm_softc *sc = ifp->if_softc; struct mbuf *m0; #if 0 /* XXXJRT */ struct m_tag *mtag; #endif struct wm_txsoft *txs; bus_dmamap_t dmamap; int error, nexttx, lasttx = -1, ofree, seg, segs_needed, use_tso; bus_addr_t curaddr; bus_size_t seglen, curlen; uint32_t cksumcmd; uint8_t cksumfields; if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) return; /* * Remember the previous number of free descriptors. */ ofree = sc->sc_txfree; /* * Loop through the send queue, setting up transmit descriptors * until we drain the queue, or use up all available transmit * descriptors. */ for (;;) { /* Grab a packet off the queue. */ IFQ_POLL(&ifp->if_snd, m0); if (m0 == NULL) break; DPRINTF(WM_DEBUG_TX, ("%s: TX: have packet to transmit: %p\n", sc->sc_dev.dv_xname, m0)); /* Get a work queue entry. */ if (sc->sc_txsfree < WM_TXQUEUE_GC(sc)) { wm_txintr(sc); if (sc->sc_txsfree == 0) { DPRINTF(WM_DEBUG_TX, ("%s: TX: no free job descriptors\n", sc->sc_dev.dv_xname)); WM_EVCNT_INCR(&sc->sc_ev_txsstall); break; } } txs = &sc->sc_txsoft[sc->sc_txsnext]; dmamap = txs->txs_dmamap; use_tso = (m0->m_pkthdr.csum_flags & M_CSUM_TSOv4) != 0; /* * So says the Linux driver: * The controller does a simple calculation to make sure * there is enough room in the FIFO before initiating the * DMA for each buffer. The calc is: * 4 = ceil(buffer len / MSS) * To make sure we don't overrun the FIFO, adjust the max * buffer len if the MSS drops. */ dmamap->dm_maxsegsz = (use_tso && (m0->m_pkthdr.segsz << 2) < WTX_MAX_LEN) ? m0->m_pkthdr.segsz << 2 : WTX_MAX_LEN; /* * Load the DMA map. If this fails, the packet either * didn't fit in the allotted number of segments, or we * were short on resources. For the too-many-segments * case, we simply report an error and drop the packet, * since we can't sanely copy a jumbo packet to a single * buffer. */ error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, BUS_DMA_WRITE|BUS_DMA_NOWAIT); if (error) { if (error == EFBIG) { WM_EVCNT_INCR(&sc->sc_ev_txdrop); log(LOG_ERR, "%s: Tx packet consumes too many " "DMA segments, dropping...\n", sc->sc_dev.dv_xname); IFQ_DEQUEUE(&ifp->if_snd, m0); wm_dump_mbuf_chain(sc, m0); m_freem(m0); continue; } /* * Short on resources, just stop for now. */ DPRINTF(WM_DEBUG_TX, ("%s: TX: dmamap load failed: %d\n", sc->sc_dev.dv_xname, error)); break; } segs_needed = dmamap->dm_nsegs; if (use_tso) { /* For sentinel descriptor; see below. */ segs_needed++; } /* * Ensure we have enough descriptors free to describe * the packet. Note, we always reserve one descriptor * at the end of the ring due to the semantics of the * TDT register, plus one more in the event we need * to load offload context. */ if (segs_needed > sc->sc_txfree - 2) { /* * Not enough free descriptors to transmit this * packet. We haven't committed anything yet, * so just unload the DMA map, put the packet * pack on the queue, and punt. Notify the upper * layer that there are no more slots left. */ DPRINTF(WM_DEBUG_TX, ("%s: TX: need %d (%d) descriptors, have %d\n", sc->sc_dev.dv_xname, dmamap->dm_nsegs, segs_needed, sc->sc_txfree - 1)); ifp->if_flags |= IFF_OACTIVE; bus_dmamap_unload(sc->sc_dmat, dmamap); WM_EVCNT_INCR(&sc->sc_ev_txdstall); break; } /* * Check for 82547 Tx FIFO bug. We need to do this * once we know we can transmit the packet, since we * do some internal FIFO space accounting here. */ if (sc->sc_type == WM_T_82547 && wm_82547_txfifo_bugchk(sc, m0)) { DPRINTF(WM_DEBUG_TX, ("%s: TX: 82547 Tx FIFO bug detected\n", sc->sc_dev.dv_xname)); ifp->if_flags |= IFF_OACTIVE; bus_dmamap_unload(sc->sc_dmat, dmamap); WM_EVCNT_INCR(&sc->sc_ev_txfifo_stall); break; } IFQ_DEQUEUE(&ifp->if_snd, m0); /* * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. */ DPRINTF(WM_DEBUG_TX, ("%s: TX: packet has %d (%d) DMA segments\n", sc->sc_dev.dv_xname, dmamap->dm_nsegs, segs_needed)); WM_EVCNT_INCR(&sc->sc_ev_txseg[dmamap->dm_nsegs - 1]); /* * Store a pointer to the packet so that we can free it * later. * * Initially, we consider the number of descriptors the * packet uses the number of DMA segments. This may be * incremented by 1 if we do checksum offload (a descriptor * is used to set the checksum context). */ txs->txs_mbuf = m0; txs->txs_firstdesc = sc->sc_txnext; txs->txs_ndesc = segs_needed; /* Set up offload parameters for this packet. */ if (m0->m_pkthdr.csum_flags & (M_CSUM_IPv4|M_CSUM_TCPv4|M_CSUM_UDPv4| M_CSUM_TCPv6|M_CSUM_UDPv6)) { if (wm_tx_offload(sc, txs, &cksumcmd, &cksumfields) != 0) { /* Error message already displayed. */ bus_dmamap_unload(sc->sc_dmat, dmamap); continue; } } else { cksumcmd = 0; cksumfields = 0; } cksumcmd |= WTX_CMD_IDE | WTX_CMD_IFCS; /* Sync the DMA map. */ bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE); /* * Initialize the transmit descriptor. */ for (nexttx = sc->sc_txnext, seg = 0; seg < dmamap->dm_nsegs; seg++) { for (seglen = dmamap->dm_segs[seg].ds_len, curaddr = dmamap->dm_segs[seg].ds_addr; seglen != 0; curaddr += curlen, seglen -= curlen, nexttx = WM_NEXTTX(sc, nexttx)) { curlen = seglen; /* * So says the Linux driver: * Work around for premature descriptor * write-backs in TSO mode. Append a * 4-byte sentinel descriptor. */ if (use_tso && seg == dmamap->dm_nsegs - 1 && curlen > 8) curlen -= 4; wm_set_dma_addr( &sc->sc_txdescs[nexttx].wtx_addr, curaddr); sc->sc_txdescs[nexttx].wtx_cmdlen = htole32(cksumcmd | curlen); sc->sc_txdescs[nexttx].wtx_fields.wtxu_status = 0; sc->sc_txdescs[nexttx].wtx_fields.wtxu_options = cksumfields; sc->sc_txdescs[nexttx].wtx_fields.wtxu_vlan = 0; lasttx = nexttx; DPRINTF(WM_DEBUG_TX, ("%s: TX: desc %d: low 0x%08lx, " "len 0x%04x\n", sc->sc_dev.dv_xname, nexttx, curaddr & 0xffffffffUL, (unsigned)curlen)); } } KASSERT(lasttx != -1); /* * Set up the command byte on the last descriptor of * the packet. If we're in the interrupt delay window, * delay the interrupt. */ sc->sc_txdescs[lasttx].wtx_cmdlen |= htole32(WTX_CMD_EOP | WTX_CMD_RS); #if 0 /* XXXJRT */ /* * If VLANs are enabled and the packet has a VLAN tag, set * up the descriptor to encapsulate the packet for us. * * This is only valid on the last descriptor of the packet. */ if ((mtag = VLAN_OUTPUT_TAG(&sc->sc_ethercom, m0)) != NULL) { sc->sc_txdescs[lasttx].wtx_cmdlen |= htole32(WTX_CMD_VLE); sc->sc_txdescs[lasttx].wtx_fields.wtxu_vlan = htole16(VLAN_TAG_VALUE(mtag) & 0xffff); } #endif /* XXXJRT */ txs->txs_lastdesc = lasttx; DPRINTF(WM_DEBUG_TX, ("%s: TX: desc %d: cmdlen 0x%08x\n", sc->sc_dev.dv_xname, lasttx, le32toh(sc->sc_txdescs[lasttx].wtx_cmdlen))); /* Sync the descriptors we're using. */ WM_CDTXSYNC(sc, sc->sc_txnext, txs->txs_ndesc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* Give the packet to the chip. */ CSR_WRITE(sc, sc->sc_tdt_reg, nexttx); DPRINTF(WM_DEBUG_TX, ("%s: TX: TDT -> %d\n", sc->sc_dev.dv_xname, nexttx)); DPRINTF(WM_DEBUG_TX, ("%s: TX: finished transmitting packet, job %d\n", sc->sc_dev.dv_xname, sc->sc_txsnext)); /* Advance the tx pointer. */ sc->sc_txfree -= txs->txs_ndesc; sc->sc_txnext = nexttx; sc->sc_txsfree--; sc->sc_txsnext = WM_NEXTTXS(sc, sc->sc_txsnext); #if NBPFILTER > 0 /* Pass the packet to any BPF listeners. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m0); #endif /* NBPFILTER > 0 */ } if (sc->sc_txsfree == 0 || sc->sc_txfree <= 2) { /* No more slots; notify upper layer. */ ifp->if_flags |= IFF_OACTIVE; } if (sc->sc_txfree != ofree) { /* Set a watchdog timer in case the chip flakes out. */ ifp->if_timer = 5; } } /* * wm_watchdog: [ifnet interface function] * * Watchdog timer handler. */ static void wm_watchdog(struct ifnet *ifp) { struct wm_softc *sc = ifp->if_softc; /* * Since we're using delayed interrupts, sweep up * before we report an error. */ wm_txintr(sc); if (sc->sc_txfree != WM_NTXDESC(sc)) { log(LOG_ERR, "%s: device timeout (txfree %d txsfree %d txnext %d)\n", sc->sc_dev.dv_xname, sc->sc_txfree, sc->sc_txsfree, sc->sc_txnext); ifp->if_oerrors++; /* Reset the interface. */ (void) wm_init(ifp); } /* Try to get more packets going. */ wm_start(ifp); } /* * wm_ioctl: [ifnet interface function] * * Handle control requests from the operator. */ static int wm_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct wm_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; int s, error; s = splnet(); switch (cmd) { case SIOCSIFMEDIA: case SIOCGIFMEDIA: /* Flow control requires full-duplex mode. */ if (IFM_SUBTYPE(ifr->ifr_media) == IFM_AUTO || (ifr->ifr_media & IFM_FDX) == 0) ifr->ifr_media &= ~IFM_ETH_FMASK; if (IFM_SUBTYPE(ifr->ifr_media) != IFM_AUTO) { if ((ifr->ifr_media & IFM_ETH_FMASK) == IFM_FLOW) { /* We can do both TXPAUSE and RXPAUSE. */ ifr->ifr_media |= IFM_ETH_TXPAUSE | IFM_ETH_RXPAUSE; } sc->sc_flowflags = ifr->ifr_media & IFM_ETH_FMASK; } error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); break; default: error = ether_ioctl(ifp, cmd, data); if (error == ENETRESET) { /* * Multicast list has changed; set the hardware filter * accordingly. */ if (ifp->if_flags & IFF_RUNNING) wm_set_filter(sc); error = 0; } break; } /* Try to get more packets going. */ wm_start(ifp); splx(s); return (error); } /* * wm_intr: * * Interrupt service routine. */ static int wm_intr(void *arg) { struct wm_softc *sc = arg; struct ifnet *ifp = &sc->sc_ethercom.ec_if; uint32_t icr; int handled = 0; while (1 /* CONSTCOND */) { icr = CSR_READ(sc, WMREG_ICR); if ((icr & sc->sc_icr) == 0) break; #if 0 /*NRND > 0*/ if (RND_ENABLED(&sc->rnd_source)) rnd_add_uint32(&sc->rnd_source, icr); #endif handled = 1; #if defined(WM_DEBUG) || defined(WM_EVENT_COUNTERS) if (icr & (ICR_RXDMT0|ICR_RXT0)) { DPRINTF(WM_DEBUG_RX, ("%s: RX: got Rx intr 0x%08x\n", sc->sc_dev.dv_xname, icr & (ICR_RXDMT0|ICR_RXT0))); WM_EVCNT_INCR(&sc->sc_ev_rxintr); } #endif wm_rxintr(sc); #if defined(WM_DEBUG) || defined(WM_EVENT_COUNTERS) if (icr & ICR_TXDW) { DPRINTF(WM_DEBUG_TX, ("%s: TX: got TXDW interrupt\n", sc->sc_dev.dv_xname)); WM_EVCNT_INCR(&sc->sc_ev_txdw); } #endif wm_txintr(sc); if (icr & (ICR_LSC|ICR_RXSEQ|ICR_RXCFG)) { WM_EVCNT_INCR(&sc->sc_ev_linkintr); wm_linkintr(sc, icr); } if (icr & ICR_RXO) { ifp->if_ierrors++; #if defined(WM_DEBUG) log(LOG_WARNING, "%s: Receive overrun\n", sc->sc_dev.dv_xname); #endif /* defined(WM_DEBUG) */ } } if (handled) { /* Try to get more packets going. */ wm_start(ifp); } return (handled); } /* * wm_txintr: * * Helper; handle transmit interrupts. */ static void wm_txintr(struct wm_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct wm_txsoft *txs; uint8_t status; int i; ifp->if_flags &= ~IFF_OACTIVE; /* * Go through the Tx list and free mbufs for those * frames which have been transmitted. */ for (i = sc->sc_txsdirty; sc->sc_txsfree != WM_TXQUEUELEN(sc); i = WM_NEXTTXS(sc, i), sc->sc_txsfree++) { txs = &sc->sc_txsoft[i]; DPRINTF(WM_DEBUG_TX, ("%s: TX: checking job %d\n", sc->sc_dev.dv_xname, i)); WM_CDTXSYNC(sc, txs->txs_firstdesc, txs->txs_ndesc, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); status = sc->sc_txdescs[txs->txs_lastdesc].wtx_fields.wtxu_status; if ((status & WTX_ST_DD) == 0) { WM_CDTXSYNC(sc, txs->txs_lastdesc, 1, BUS_DMASYNC_PREREAD); break; } DPRINTF(WM_DEBUG_TX, ("%s: TX: job %d done: descs %d..%d\n", sc->sc_dev.dv_xname, i, txs->txs_firstdesc, txs->txs_lastdesc)); /* * XXX We should probably be using the statistics * XXX registers, but I don't know if they exist * XXX on chips before the i82544. */ #ifdef WM_EVENT_COUNTERS if (status & WTX_ST_TU) WM_EVCNT_INCR(&sc->sc_ev_tu); #endif /* WM_EVENT_COUNTERS */ if (status & (WTX_ST_EC|WTX_ST_LC)) { ifp->if_oerrors++; if (status & WTX_ST_LC) log(LOG_WARNING, "%s: late collision\n", sc->sc_dev.dv_xname); else if (status & WTX_ST_EC) { ifp->if_collisions += 16; log(LOG_WARNING, "%s: excessive collisions\n", sc->sc_dev.dv_xname); } } else ifp->if_opackets++; sc->sc_txfree += txs->txs_ndesc; bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); m_freem(txs->txs_mbuf); txs->txs_mbuf = NULL; } /* Update the dirty transmit buffer pointer. */ sc->sc_txsdirty = i; DPRINTF(WM_DEBUG_TX, ("%s: TX: txsdirty -> %d\n", sc->sc_dev.dv_xname, i)); /* * If there are no more pending transmissions, cancel the watchdog * timer. */ if (sc->sc_txsfree == WM_TXQUEUELEN(sc)) ifp->if_timer = 0; } /* * wm_rxintr: * * Helper; handle receive interrupts. */ static void wm_rxintr(struct wm_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct wm_rxsoft *rxs; struct mbuf *m; int i, len; uint8_t status, errors; for (i = sc->sc_rxptr;; i = WM_NEXTRX(i)) { rxs = &sc->sc_rxsoft[i]; DPRINTF(WM_DEBUG_RX, ("%s: RX: checking descriptor %d\n", sc->sc_dev.dv_xname, i)); WM_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); status = sc->sc_rxdescs[i].wrx_status; errors = sc->sc_rxdescs[i].wrx_errors; len = le16toh(sc->sc_rxdescs[i].wrx_len); if ((status & WRX_ST_DD) == 0) { /* * We have processed all of the receive descriptors. */ WM_CDRXSYNC(sc, i, BUS_DMASYNC_PREREAD); break; } if (__predict_false(sc->sc_rxdiscard)) { DPRINTF(WM_DEBUG_RX, ("%s: RX: discarding contents of descriptor %d\n", sc->sc_dev.dv_xname, i)); WM_INIT_RXDESC(sc, i); if (status & WRX_ST_EOP) { /* Reset our state. */ DPRINTF(WM_DEBUG_RX, ("%s: RX: resetting rxdiscard -> 0\n", sc->sc_dev.dv_xname)); sc->sc_rxdiscard = 0; } continue; } bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); m = rxs->rxs_mbuf; /* * Add a new receive buffer to the ring. */ if (wm_add_rxbuf(sc, i) != 0) { /* * Failed, throw away what we've done so * far, and discard the rest of the packet. */ ifp->if_ierrors++; bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); WM_INIT_RXDESC(sc, i); if ((status & WRX_ST_EOP) == 0) sc->sc_rxdiscard = 1; if (sc->sc_rxhead != NULL) m_freem(sc->sc_rxhead); WM_RXCHAIN_RESET(sc); DPRINTF(WM_DEBUG_RX, ("%s: RX: Rx buffer allocation failed, " "dropping packet%s\n", sc->sc_dev.dv_xname, sc->sc_rxdiscard ? " (discard)" : "")); continue; } WM_RXCHAIN_LINK(sc, m); m->m_len = len; DPRINTF(WM_DEBUG_RX, ("%s: RX: buffer at %p len %d\n", sc->sc_dev.dv_xname, m->m_data, len)); /* * If this is not the end of the packet, keep * looking. */ if ((status & WRX_ST_EOP) == 0) { sc->sc_rxlen += len; DPRINTF(WM_DEBUG_RX, ("%s: RX: not yet EOP, rxlen -> %d\n", sc->sc_dev.dv_xname, sc->sc_rxlen)); continue; } /* * Okay, we have the entire packet now. The chip is * configured to include the FCS (not all chips can * be configured to strip it), so we need to trim it. */ m->m_len -= ETHER_CRC_LEN; *sc->sc_rxtailp = NULL; m = sc->sc_rxhead; len = m->m_len + sc->sc_rxlen; WM_RXCHAIN_RESET(sc); DPRINTF(WM_DEBUG_RX, ("%s: RX: have entire packet, len -> %d\n", sc->sc_dev.dv_xname, len)); /* * If an error occurred, update stats and drop the packet. */ if (errors & (WRX_ER_CE|WRX_ER_SE|WRX_ER_SEQ|WRX_ER_CXE|WRX_ER_RXE)) { ifp->if_ierrors++; if (errors & WRX_ER_SE) log(LOG_WARNING, "%s: symbol error\n", sc->sc_dev.dv_xname); else if (errors & WRX_ER_SEQ) log(LOG_WARNING, "%s: receive sequence error\n", sc->sc_dev.dv_xname); else if (errors & WRX_ER_CE) log(LOG_WARNING, "%s: CRC error\n", sc->sc_dev.dv_xname); m_freem(m); continue; } /* * No errors. Receive the packet. */ m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = len; #if 0 /* XXXJRT */ /* * If VLANs are enabled, VLAN packets have been unwrapped * for us. Associate the tag with the packet. */ if ((status & WRX_ST_VP) != 0) { VLAN_INPUT_TAG(ifp, m, le16toh(sc->sc_rxdescs[i].wrx_special, continue); } #endif /* XXXJRT */ /* * Set up checksum info for this packet. */ if ((status & WRX_ST_IXSM) == 0) { if (status & WRX_ST_IPCS) { WM_EVCNT_INCR(&sc->sc_ev_rxipsum); m->m_pkthdr.csum_flags |= M_CSUM_IPv4; if (errors & WRX_ER_IPE) m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD; } if (status & WRX_ST_TCPCS) { /* * Note: we don't know if this was TCP or UDP, * so we just set both bits, and expect the * upper layers to deal. */ WM_EVCNT_INCR(&sc->sc_ev_rxtusum); m->m_pkthdr.csum_flags |= M_CSUM_TCPv4|M_CSUM_UDPv4; if (errors & WRX_ER_TCPE) m->m_pkthdr.csum_flags |= M_CSUM_TCP_UDP_BAD; } } ifp->if_ipackets++; #if NBPFILTER > 0 /* Pass this up to any BPF listeners. */ if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m); #endif /* NBPFILTER > 0 */ /* Pass it on. */ (*ifp->if_input)(ifp, m); } /* Update the receive pointer. */ sc->sc_rxptr = i; DPRINTF(WM_DEBUG_RX, ("%s: RX: rxptr -> %d\n", sc->sc_dev.dv_xname, i)); } /* * wm_linkintr: * * Helper; handle link interrupts. */ static void wm_linkintr(struct wm_softc *sc, uint32_t icr) { uint32_t status; /* * If we get a link status interrupt on a 1000BASE-T * device, just fall into the normal MII tick path. */ if (sc->sc_flags & WM_F_HAS_MII) { if (icr & ICR_LSC) { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: LSC -> mii_tick\n", sc->sc_dev.dv_xname)); mii_tick(&sc->sc_mii); } else if (icr & ICR_RXSEQ) { DPRINTF(WM_DEBUG_LINK, ("%s: LINK Receive sequence error\n", sc->sc_dev.dv_xname)); } return; } /* * If we are now receiving /C/, check for link again in * a couple of link clock ticks. */ if (icr & ICR_RXCFG) { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: receiving /C/\n", sc->sc_dev.dv_xname)); sc->sc_tbi_anstate = 2; } if (icr & ICR_LSC) { status = CSR_READ(sc, WMREG_STATUS); if (status & STATUS_LU) { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: LSC -> up %s\n", sc->sc_dev.dv_xname, (status & STATUS_FD) ? "FDX" : "HDX")); sc->sc_tctl &= ~TCTL_COLD(0x3ff); sc->sc_fcrtl &= ~FCRTL_XONE; if (status & STATUS_FD) sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_FDX); else sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_HDX); if (CSR_READ(sc, WMREG_CTRL) & CTRL_TFCE) sc->sc_fcrtl |= FCRTL_XONE; CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); CSR_WRITE(sc, (sc->sc_type < WM_T_82543) ? WMREG_OLD_FCRTL : WMREG_FCRTL, sc->sc_fcrtl); sc->sc_tbi_linkup = 1; } else { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: LSC -> down\n", sc->sc_dev.dv_xname)); sc->sc_tbi_linkup = 0; } sc->sc_tbi_anstate = 2; wm_tbi_set_linkled(sc); } else if (icr & ICR_RXSEQ) { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: Receive sequence error\n", sc->sc_dev.dv_xname)); } } /* * wm_tick: * * One second timer, used to check link status, sweep up * completed transmit jobs, etc. */ static void wm_tick(void *arg) { struct wm_softc *sc = arg; int s; s = splnet(); if (sc->sc_type >= WM_T_82542_2_1) { WM_EVCNT_ADD(&sc->sc_ev_rx_xon, CSR_READ(sc, WMREG_XONRXC)); WM_EVCNT_ADD(&sc->sc_ev_tx_xon, CSR_READ(sc, WMREG_XONTXC)); WM_EVCNT_ADD(&sc->sc_ev_rx_xoff, CSR_READ(sc, WMREG_XOFFRXC)); WM_EVCNT_ADD(&sc->sc_ev_tx_xoff, CSR_READ(sc, WMREG_XOFFTXC)); WM_EVCNT_ADD(&sc->sc_ev_rx_macctl, CSR_READ(sc, WMREG_FCRUC)); } if (sc->sc_flags & WM_F_HAS_MII) mii_tick(&sc->sc_mii); else wm_tbi_check_link(sc); splx(s); callout_reset(&sc->sc_tick_ch, hz, wm_tick, sc); } /* * wm_reset: * * Reset the i82542 chip. */ static void wm_reset(struct wm_softc *sc) { int i; /* * Allocate on-chip memory according to the MTU size. * The Packet Buffer Allocation register must be written * before the chip is reset. */ if (sc->sc_type < WM_T_82547) { sc->sc_pba = sc->sc_ethercom.ec_if.if_mtu > 8192 ? PBA_40K : PBA_48K; } else { sc->sc_pba = sc->sc_ethercom.ec_if.if_mtu > 8192 ? PBA_22K : PBA_30K; sc->sc_txfifo_head = 0; sc->sc_txfifo_addr = sc->sc_pba << PBA_ADDR_SHIFT; sc->sc_txfifo_size = (PBA_40K - sc->sc_pba) << PBA_BYTE_SHIFT; sc->sc_txfifo_stall = 0; } CSR_WRITE(sc, WMREG_PBA, sc->sc_pba); switch (sc->sc_type) { case WM_T_82544: case WM_T_82540: case WM_T_82545: case WM_T_82546: case WM_T_82541: case WM_T_82541_2: /* * On some chipsets, a reset through a memory-mapped write * cycle can cause the chip to reset before completing the * write cycle. This causes major headache that can be * avoided by issuing the reset via indirect register writes * through I/O space. * * So, if we successfully mapped the I/O BAR at attach time, * use that. Otherwise, try our luck with a memory-mapped * reset. */ if (sc->sc_flags & WM_F_IOH_VALID) wm_io_write(sc, WMREG_CTRL, CTRL_RST); else CSR_WRITE(sc, WMREG_CTRL, CTRL_RST); break; case WM_T_82545_3: case WM_T_82546_3: /* Use the shadow control register on these chips. */ CSR_WRITE(sc, WMREG_CTRL_SHADOW, CTRL_RST); break; default: /* Everything else can safely use the documented method. */ CSR_WRITE(sc, WMREG_CTRL, CTRL_RST); break; } delay(10000); for (i = 0; i < 1000; i++) { if ((CSR_READ(sc, WMREG_CTRL) & CTRL_RST) == 0) return; delay(20); } if (CSR_READ(sc, WMREG_CTRL) & CTRL_RST) log(LOG_ERR, "%s: reset failed to complete\n", sc->sc_dev.dv_xname); } /* * wm_init: [ifnet interface function] * * Initialize the interface. Must be called at splnet(). */ static int wm_init(struct ifnet *ifp) { struct wm_softc *sc = ifp->if_softc; struct wm_rxsoft *rxs; int i, error = 0; uint32_t reg; /* * *_HDR_ALIGNED_P is constant 1 if __NO_STRICT_ALIGMENT is set. * There is a small but measurable benefit to avoiding the adjusment * of the descriptor so that the headers are aligned, for normal mtu, * on such platforms. One possibility is that the DMA itself is * slightly more efficient if the front of the entire packet (instead * of the front of the headers) is aligned. * * Note we must always set align_tweak to 0 if we are using * jumbo frames. */ #ifdef __NO_STRICT_ALIGNMENT sc->sc_align_tweak = 0; #else if ((ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN) > (MCLBYTES - 2)) sc->sc_align_tweak = 0; else sc->sc_align_tweak = 2; #endif /* __NO_STRICT_ALIGNMENT */ /* Cancel any pending I/O. */ wm_stop(ifp, 0); /* Reset the chip to a known state. */ wm_reset(sc); /* Initialize the transmit descriptor ring. */ memset(sc->sc_txdescs, 0, WM_TXDESCSIZE(sc)); WM_CDTXSYNC(sc, 0, WM_NTXDESC(sc), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); sc->sc_txfree = WM_NTXDESC(sc); sc->sc_txnext = 0; if (sc->sc_type < WM_T_82543) { CSR_WRITE(sc, WMREG_OLD_TBDAH, WM_CDTXADDR_HI(sc, 0)); CSR_WRITE(sc, WMREG_OLD_TBDAL, WM_CDTXADDR_LO(sc, 0)); CSR_WRITE(sc, WMREG_OLD_TDLEN, WM_TXDESCSIZE(sc)); CSR_WRITE(sc, WMREG_OLD_TDH, 0); CSR_WRITE(sc, WMREG_OLD_TDT, 0); CSR_WRITE(sc, WMREG_OLD_TIDV, 128); } else { CSR_WRITE(sc, WMREG_TBDAH, WM_CDTXADDR_HI(sc, 0)); CSR_WRITE(sc, WMREG_TBDAL, WM_CDTXADDR_LO(sc, 0)); CSR_WRITE(sc, WMREG_TDLEN, WM_TXDESCSIZE(sc)); CSR_WRITE(sc, WMREG_TDH, 0); CSR_WRITE(sc, WMREG_TDT, 0); CSR_WRITE(sc, WMREG_TIDV, 64); CSR_WRITE(sc, WMREG_TADV, 128); CSR_WRITE(sc, WMREG_TXDCTL, TXDCTL_PTHRESH(0) | TXDCTL_HTHRESH(0) | TXDCTL_WTHRESH(0)); CSR_WRITE(sc, WMREG_RXDCTL, RXDCTL_PTHRESH(0) | RXDCTL_HTHRESH(0) | RXDCTL_WTHRESH(1)); } CSR_WRITE(sc, WMREG_TQSA_LO, 0); CSR_WRITE(sc, WMREG_TQSA_HI, 0); /* Initialize the transmit job descriptors. */ for (i = 0; i < WM_TXQUEUELEN(sc); i++) sc->sc_txsoft[i].txs_mbuf = NULL; sc->sc_txsfree = WM_TXQUEUELEN(sc); sc->sc_txsnext = 0; sc->sc_txsdirty = 0; /* * Initialize the receive descriptor and receive job * descriptor rings. */ if (sc->sc_type < WM_T_82543) { CSR_WRITE(sc, WMREG_OLD_RDBAH0, WM_CDRXADDR_HI(sc, 0)); CSR_WRITE(sc, WMREG_OLD_RDBAL0, WM_CDRXADDR_LO(sc, 0)); CSR_WRITE(sc, WMREG_OLD_RDLEN0, sizeof(sc->sc_rxdescs)); CSR_WRITE(sc, WMREG_OLD_RDH0, 0); CSR_WRITE(sc, WMREG_OLD_RDT0, 0); CSR_WRITE(sc, WMREG_OLD_RDTR0, 28 | RDTR_FPD); CSR_WRITE(sc, WMREG_OLD_RDBA1_HI, 0); CSR_WRITE(sc, WMREG_OLD_RDBA1_LO, 0); CSR_WRITE(sc, WMREG_OLD_RDLEN1, 0); CSR_WRITE(sc, WMREG_OLD_RDH1, 0); CSR_WRITE(sc, WMREG_OLD_RDT1, 0); CSR_WRITE(sc, WMREG_OLD_RDTR1, 0); } else { CSR_WRITE(sc, WMREG_RDBAH, WM_CDRXADDR_HI(sc, 0)); CSR_WRITE(sc, WMREG_RDBAL, WM_CDRXADDR_LO(sc, 0)); CSR_WRITE(sc, WMREG_RDLEN, sizeof(sc->sc_rxdescs)); CSR_WRITE(sc, WMREG_RDH, 0); CSR_WRITE(sc, WMREG_RDT, 0); CSR_WRITE(sc, WMREG_RDTR, 0 | RDTR_FPD); CSR_WRITE(sc, WMREG_RADV, 128); } for (i = 0; i < WM_NRXDESC; i++) { rxs = &sc->sc_rxsoft[i]; if (rxs->rxs_mbuf == NULL) { if ((error = wm_add_rxbuf(sc, i)) != 0) { log(LOG_ERR, "%s: unable to allocate or map rx " "buffer %d, error = %d\n", sc->sc_dev.dv_xname, i, error); /* * XXX Should attempt to run with fewer receive * XXX buffers instead of just failing. */ wm_rxdrain(sc); goto out; } } else WM_INIT_RXDESC(sc, i); } sc->sc_rxptr = 0; sc->sc_rxdiscard = 0; WM_RXCHAIN_RESET(sc); /* * Clear out the VLAN table -- we don't use it (yet). */ CSR_WRITE(sc, WMREG_VET, 0); for (i = 0; i < WM_VLAN_TABSIZE; i++) CSR_WRITE(sc, WMREG_VFTA + (i << 2), 0); /* * Set up flow-control parameters. * * XXX Values could probably stand some tuning. */ CSR_WRITE(sc, WMREG_FCAL, FCAL_CONST); CSR_WRITE(sc, WMREG_FCAH, FCAH_CONST); CSR_WRITE(sc, WMREG_FCT, ETHERTYPE_FLOWCONTROL); sc->sc_fcrtl = FCRTL_DFLT; if (sc->sc_type < WM_T_82543) { CSR_WRITE(sc, WMREG_OLD_FCRTH, FCRTH_DFLT); CSR_WRITE(sc, WMREG_OLD_FCRTL, sc->sc_fcrtl); } else { CSR_WRITE(sc, WMREG_FCRTH, FCRTH_DFLT); CSR_WRITE(sc, WMREG_FCRTL, sc->sc_fcrtl); } CSR_WRITE(sc, WMREG_FCTTV, FCTTV_DFLT); #if 0 /* XXXJRT */ /* Deal with VLAN enables. */ if (VLAN_ATTACHED(&sc->sc_ethercom)) sc->sc_ctrl |= CTRL_VME; else #endif /* XXXJRT */ sc->sc_ctrl &= ~CTRL_VME; /* Write the control registers. */ CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); #if 0 CSR_WRITE(sc, WMREG_CTRL_EXT, sc->sc_ctrl_ext); #endif /* * Set up checksum offload parameters. */ reg = CSR_READ(sc, WMREG_RXCSUM); if (ifp->if_capenable & IFCAP_CSUM_IPv4_Rx) reg |= RXCSUM_IPOFL; else reg &= ~RXCSUM_IPOFL; if (ifp->if_capenable & (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) reg |= RXCSUM_IPOFL | RXCSUM_TUOFL; else { reg &= ~RXCSUM_TUOFL; if ((ifp->if_capenable & IFCAP_CSUM_IPv4_Rx) == 0) reg &= ~RXCSUM_IPOFL; } CSR_WRITE(sc, WMREG_RXCSUM, reg); /* * Set up the interrupt registers. */ CSR_WRITE(sc, WMREG_IMC, 0xffffffffU); sc->sc_icr = ICR_TXDW | ICR_LSC | ICR_RXSEQ | ICR_RXDMT0 | ICR_RXO | ICR_RXT0; if ((sc->sc_flags & WM_F_HAS_MII) == 0) sc->sc_icr |= ICR_RXCFG; CSR_WRITE(sc, WMREG_IMS, sc->sc_icr); /* Set up the inter-packet gap. */ CSR_WRITE(sc, WMREG_TIPG, sc->sc_tipg); if (sc->sc_type >= WM_T_82543) { /* Set up the interrupt throttling register (units of 256ns) */ sc->sc_itr = 1000000000 / (7000 * 256); CSR_WRITE(sc, WMREG_ITR, sc->sc_itr); } #if 0 /* XXXJRT */ /* Set the VLAN ethernetype. */ CSR_WRITE(sc, WMREG_VET, ETHERTYPE_VLAN); #endif /* * Set up the transmit control register; we start out with * a collision distance suitable for FDX, but update it whe * we resolve the media type. */ sc->sc_tctl = TCTL_EN | TCTL_PSP | TCTL_CT(TX_COLLISION_THRESHOLD) | TCTL_COLD(TX_COLLISION_DISTANCE_FDX); CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); /* Set the media. */ (void) (*sc->sc_mii.mii_media.ifm_change)(ifp); /* * Set up the receive control register; we actually program * the register when we set the receive filter. Use multicast * address offset type 0. * * Only the i82544 has the ability to strip the incoming * CRC, so we don't enable that feature. */ sc->sc_mchash_type = 0; sc->sc_rctl = RCTL_EN | RCTL_LBM_NONE | RCTL_RDMTS_1_2 | RCTL_LPE | RCTL_DPF | RCTL_MO(sc->sc_mchash_type); if(MCLBYTES == 2048) { sc->sc_rctl |= RCTL_2k; } else { if(sc->sc_type >= WM_T_82543) { switch(MCLBYTES) { case 4096: sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_4k; break; case 8192: sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_8k; break; case 16384: sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_16k; break; default: panic("wm_init: MCLBYTES %d unsupported", MCLBYTES); break; } } else panic("wm_init: i82542 requires MCLBYTES = 2048"); } /* Set the receive filter. */ wm_set_filter(sc); /* Start the one second link check clock. */ callout_reset(&sc->sc_tick_ch, hz, wm_tick, sc); /* ...all done! */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; out: if (error) log(LOG_ERR, "%s: interface not running\n", sc->sc_dev.dv_xname); return (error); } /* * wm_rxdrain: * * Drain the receive queue. */ static void wm_rxdrain(struct wm_softc *sc) { struct wm_rxsoft *rxs; int i; for (i = 0; i < WM_NRXDESC; i++) { rxs = &sc->sc_rxsoft[i]; if (rxs->rxs_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); m_freem(rxs->rxs_mbuf); rxs->rxs_mbuf = NULL; } } } /* * wm_stop: [ifnet interface function] * * Stop transmission on the interface. */ static void wm_stop(struct ifnet *ifp, int disable) { struct wm_softc *sc = ifp->if_softc; struct wm_txsoft *txs; int i; /* Stop the one second clock. */ callout_stop(&sc->sc_tick_ch); /* Stop the 82547 Tx FIFO stall check timer. */ if (sc->sc_type == WM_T_82547) callout_stop(&sc->sc_txfifo_ch); if (sc->sc_flags & WM_F_HAS_MII) { /* Down the MII. */ mii_down(&sc->sc_mii); } /* Stop the transmit and receive processes. */ CSR_WRITE(sc, WMREG_TCTL, 0); CSR_WRITE(sc, WMREG_RCTL, 0); /* * Clear the interrupt mask to ensure the device cannot assert its * interrupt line. * Clear sc->sc_icr to ensure wm_intr() makes no attempt to service * any currently pending or shared interrupt. */ CSR_WRITE(sc, WMREG_IMC, 0xffffffffU); sc->sc_icr = 0; /* Release any queued transmit buffers. */ for (i = 0; i < WM_TXQUEUELEN(sc); i++) { txs = &sc->sc_txsoft[i]; if (txs->txs_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); m_freem(txs->txs_mbuf); txs->txs_mbuf = NULL; } } if (disable) wm_rxdrain(sc); /* Mark the interface as down and cancel the watchdog timer. */ ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; } /* * wm_acquire_eeprom: * * Perform the EEPROM handshake required on some chips. */ static int wm_acquire_eeprom(struct wm_softc *sc) { uint32_t reg; int x; if (sc->sc_flags & WM_F_EEPROM_HANDSHAKE) { reg = CSR_READ(sc, WMREG_EECD); /* Request EEPROM access. */ reg |= EECD_EE_REQ; CSR_WRITE(sc, WMREG_EECD, reg); /* ..and wait for it to be granted. */ for (x = 0; x < 100; x++) { reg = CSR_READ(sc, WMREG_EECD); if (reg & EECD_EE_GNT) break; delay(5); } if ((reg & EECD_EE_GNT) == 0) { aprint_error("%s: could not acquire EEPROM GNT\n", sc->sc_dev.dv_xname); reg &= ~EECD_EE_REQ; CSR_WRITE(sc, WMREG_EECD, reg); return (1); } } return (0); } /* * wm_release_eeprom: * * Release the EEPROM mutex. */ static void wm_release_eeprom(struct wm_softc *sc) { uint32_t reg; if (sc->sc_flags & WM_F_EEPROM_HANDSHAKE) { reg = CSR_READ(sc, WMREG_EECD); reg &= ~EECD_EE_REQ; CSR_WRITE(sc, WMREG_EECD, reg); } } /* * wm_eeprom_sendbits: * * Send a series of bits to the EEPROM. */ static void wm_eeprom_sendbits(struct wm_softc *sc, uint32_t bits, int nbits) { uint32_t reg; int x; reg = CSR_READ(sc, WMREG_EECD); for (x = nbits; x > 0; x--) { if (bits & (1U << (x - 1))) reg |= EECD_DI; else reg &= ~EECD_DI; CSR_WRITE(sc, WMREG_EECD, reg); delay(2); CSR_WRITE(sc, WMREG_EECD, reg | EECD_SK); delay(2); CSR_WRITE(sc, WMREG_EECD, reg); delay(2); } } /* * wm_eeprom_recvbits: * * Receive a series of bits from the EEPROM. */ static void wm_eeprom_recvbits(struct wm_softc *sc, uint32_t *valp, int nbits) { uint32_t reg, val; int x; reg = CSR_READ(sc, WMREG_EECD) & ~EECD_DI; val = 0; for (x = nbits; x > 0; x--) { CSR_WRITE(sc, WMREG_EECD, reg | EECD_SK); delay(2); if (CSR_READ(sc, WMREG_EECD) & EECD_DO) val |= (1U << (x - 1)); CSR_WRITE(sc, WMREG_EECD, reg); delay(2); } *valp = val; } /* * wm_read_eeprom_uwire: * * Read a word from the EEPROM using the MicroWire protocol. */ static int wm_read_eeprom_uwire(struct wm_softc *sc, int word, int wordcnt, uint16_t *data) { uint32_t reg, val; int i; for (i = 0; i < wordcnt; i++) { /* Clear SK and DI. */ reg = CSR_READ(sc, WMREG_EECD) & ~(EECD_SK | EECD_DI); CSR_WRITE(sc, WMREG_EECD, reg); /* Set CHIP SELECT. */ reg |= EECD_CS; CSR_WRITE(sc, WMREG_EECD, reg); delay(2); /* Shift in the READ command. */ wm_eeprom_sendbits(sc, UWIRE_OPC_READ, 3); /* Shift in address. */ wm_eeprom_sendbits(sc, word + i, sc->sc_ee_addrbits); /* Shift out the data. */ wm_eeprom_recvbits(sc, &val, 16); data[i] = val & 0xffff; /* Clear CHIP SELECT. */ reg = CSR_READ(sc, WMREG_EECD) & ~EECD_CS; CSR_WRITE(sc, WMREG_EECD, reg); delay(2); } return (0); } /* * wm_spi_eeprom_ready: * * Wait for a SPI EEPROM to be ready for commands. */ static int wm_spi_eeprom_ready(struct wm_softc *sc) { uint32_t val; int usec; for (usec = 0; usec < SPI_MAX_RETRIES; delay(5), usec += 5) { wm_eeprom_sendbits(sc, SPI_OPC_RDSR, 8); wm_eeprom_recvbits(sc, &val, 8); if ((val & SPI_SR_RDY) == 0) break; } if (usec >= SPI_MAX_RETRIES) { aprint_error("%s: EEPROM failed to become ready\n", sc->sc_dev.dv_xname); return (1); } return (0); } /* * wm_read_eeprom_spi: * * Read a work from the EEPROM using the SPI protocol. */ static int wm_read_eeprom_spi(struct wm_softc *sc, int word, int wordcnt, uint16_t *data) { uint32_t reg, val; int i; uint8_t opc; /* Clear SK and CS. */ reg = CSR_READ(sc, WMREG_EECD) & ~(EECD_SK | EECD_CS); CSR_WRITE(sc, WMREG_EECD, reg); delay(2); if (wm_spi_eeprom_ready(sc)) return (1); /* Toggle CS to flush commands. */ CSR_WRITE(sc, WMREG_EECD, reg | EECD_CS); delay(2); CSR_WRITE(sc, WMREG_EECD, reg); delay(2); opc = SPI_OPC_READ; if (sc->sc_ee_addrbits == 8 && word >= 128) opc |= SPI_OPC_A8; wm_eeprom_sendbits(sc, opc, 8); wm_eeprom_sendbits(sc, word << 1, sc->sc_ee_addrbits); for (i = 0; i < wordcnt; i++) { wm_eeprom_recvbits(sc, &val, 16); data[i] = ((val >> 8) & 0xff) | ((val & 0xff) << 8); } /* Raise CS and clear SK. */ reg = (CSR_READ(sc, WMREG_EECD) & ~EECD_SK) | EECD_CS; CSR_WRITE(sc, WMREG_EECD, reg); delay(2); return (0); } /* * wm_read_eeprom: * * Read data from the serial EEPROM. */ static int wm_read_eeprom(struct wm_softc *sc, int word, int wordcnt, uint16_t *data) { int rv; if (wm_acquire_eeprom(sc)) return (1); if (sc->sc_flags & WM_F_EEPROM_SPI) rv = wm_read_eeprom_spi(sc, word, wordcnt, data); else rv = wm_read_eeprom_uwire(sc, word, wordcnt, data); wm_release_eeprom(sc); return (rv); } /* * wm_add_rxbuf: * * Add a receive buffer to the indiciated descriptor. */ static int wm_add_rxbuf(struct wm_softc *sc, int idx) { struct wm_rxsoft *rxs = &sc->sc_rxsoft[idx]; struct mbuf *m; int error; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return (ENOBUFS); MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); return (ENOBUFS); } if (rxs->rxs_mbuf != NULL) bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); rxs->rxs_mbuf = m; m->m_len = m->m_pkthdr.len = m->m_ext.ext_size; error = bus_dmamap_load_mbuf(sc->sc_dmat, rxs->rxs_dmamap, m, BUS_DMA_READ|BUS_DMA_NOWAIT); if (error) { /* XXX XXX XXX */ printf("%s: unable to load rx DMA map %d, error = %d\n", sc->sc_dev.dv_xname, idx, error); panic("wm_add_rxbuf"); } bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); WM_INIT_RXDESC(sc, idx); return (0); } /* * wm_set_ral: * * Set an entery in the receive address list. */ static void wm_set_ral(struct wm_softc *sc, const uint8_t *enaddr, int idx) { uint32_t ral_lo, ral_hi; if (enaddr != NULL) { ral_lo = enaddr[0] | (enaddr[1] << 8) | (enaddr[2] << 16) | (enaddr[3] << 24); ral_hi = enaddr[4] | (enaddr[5] << 8); ral_hi |= RAL_AV; } else { ral_lo = 0; ral_hi = 0; } if (sc->sc_type >= WM_T_82544) { CSR_WRITE(sc, WMREG_RAL_LO(WMREG_CORDOVA_RAL_BASE, idx), ral_lo); CSR_WRITE(sc, WMREG_RAL_HI(WMREG_CORDOVA_RAL_BASE, idx), ral_hi); } else { CSR_WRITE(sc, WMREG_RAL_LO(WMREG_RAL_BASE, idx), ral_lo); CSR_WRITE(sc, WMREG_RAL_HI(WMREG_RAL_BASE, idx), ral_hi); } } /* * wm_mchash: * * Compute the hash of the multicast address for the 4096-bit * multicast filter. */ static uint32_t wm_mchash(struct wm_softc *sc, const uint8_t *enaddr) { static const int lo_shift[4] = { 4, 3, 2, 0 }; static const int hi_shift[4] = { 4, 5, 6, 8 }; uint32_t hash; hash = (enaddr[4] >> lo_shift[sc->sc_mchash_type]) | (((uint16_t) enaddr[5]) << hi_shift[sc->sc_mchash_type]); return (hash & 0xfff); } /* * wm_set_filter: * * Set up the receive filter. */ static void wm_set_filter(struct wm_softc *sc) { struct ethercom *ec = &sc->sc_ethercom; struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ether_multi *enm; struct ether_multistep step; bus_addr_t mta_reg; uint32_t hash, reg, bit; int i; if (sc->sc_type >= WM_T_82544) mta_reg = WMREG_CORDOVA_MTA; else mta_reg = WMREG_MTA; sc->sc_rctl &= ~(RCTL_BAM | RCTL_UPE | RCTL_MPE); if (ifp->if_flags & IFF_BROADCAST) sc->sc_rctl |= RCTL_BAM; if (ifp->if_flags & IFF_PROMISC) { sc->sc_rctl |= RCTL_UPE; goto allmulti; } /* * Set the station address in the first RAL slot, and * clear the remaining slots. */ wm_set_ral(sc, LLADDR(ifp->if_sadl), 0); for (i = 1; i < WM_RAL_TABSIZE; i++) wm_set_ral(sc, NULL, i); /* Clear out the multicast table. */ for (i = 0; i < WM_MC_TABSIZE; i++) CSR_WRITE(sc, mta_reg + (i << 2), 0); ETHER_FIRST_MULTI(step, ec, enm); while (enm != NULL) { if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { /* * We must listen to a range of multicast addresses. * For now, just accept all multicasts, rather than * trying to set only those filter bits needed to match * the range. (At this time, the only use of address * ranges is for IP multicast routing, for which the * range is big enough to require all bits set.) */ goto allmulti; } hash = wm_mchash(sc, enm->enm_addrlo); reg = (hash >> 5) & 0x7f; bit = hash & 0x1f; hash = CSR_READ(sc, mta_reg + (reg << 2)); hash |= 1U << bit; /* XXX Hardware bug?? */ if (sc->sc_type == WM_T_82544 && (reg & 0xe) == 1) { bit = CSR_READ(sc, mta_reg + ((reg - 1) << 2)); CSR_WRITE(sc, mta_reg + (reg << 2), hash); CSR_WRITE(sc, mta_reg + ((reg - 1) << 2), bit); } else CSR_WRITE(sc, mta_reg + (reg << 2), hash); ETHER_NEXT_MULTI(step, enm); } ifp->if_flags &= ~IFF_ALLMULTI; goto setit; allmulti: ifp->if_flags |= IFF_ALLMULTI; sc->sc_rctl |= RCTL_MPE; setit: CSR_WRITE(sc, WMREG_RCTL, sc->sc_rctl); } /* * wm_tbi_mediainit: * * Initialize media for use on 1000BASE-X devices. */ static void wm_tbi_mediainit(struct wm_softc *sc) { const char *sep = ""; if (sc->sc_type < WM_T_82543) sc->sc_tipg = TIPG_WM_DFLT; else sc->sc_tipg = TIPG_LG_DFLT; ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, wm_tbi_mediachange, wm_tbi_mediastatus); /* * SWD Pins: * * 0 = Link LED (output) * 1 = Loss Of Signal (input) */ sc->sc_ctrl |= CTRL_SWDPIO(0); sc->sc_ctrl &= ~CTRL_SWDPIO(1); CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); #define ADD(ss, mm, dd) \ do { \ aprint_normal("%s%s", sep, ss); \ ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|(mm), (dd), NULL); \ sep = ", "; \ } while (/*CONSTCOND*/0) aprint_normal("%s: ", sc->sc_dev.dv_xname); ADD("1000baseSX", IFM_1000_SX, ANAR_X_HD); ADD("1000baseSX-FDX", IFM_1000_SX|IFM_FDX, ANAR_X_FD); ADD("auto", IFM_AUTO, ANAR_X_FD|ANAR_X_HD); aprint_normal("\n"); #undef ADD ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } /* * wm_tbi_mediastatus: [ifmedia interface function] * * Get the current interface media status on a 1000BASE-X device. */ static void wm_tbi_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) { struct wm_softc *sc = ifp->if_softc; uint32_t ctrl; ifmr->ifm_status = IFM_AVALID; ifmr->ifm_active = IFM_ETHER; if (sc->sc_tbi_linkup == 0) { ifmr->ifm_active |= IFM_NONE; return; } ifmr->ifm_status |= IFM_ACTIVE; ifmr->ifm_active |= IFM_1000_SX; if (CSR_READ(sc, WMREG_STATUS) & STATUS_FD) ifmr->ifm_active |= IFM_FDX; ctrl = CSR_READ(sc, WMREG_CTRL); if (ctrl & CTRL_RFCE) ifmr->ifm_active |= IFM_FLOW | IFM_ETH_RXPAUSE; if (ctrl & CTRL_TFCE) ifmr->ifm_active |= IFM_FLOW | IFM_ETH_TXPAUSE; } /* * wm_tbi_mediachange: [ifmedia interface function] * * Set hardware to newly-selected media on a 1000BASE-X device. */ static int wm_tbi_mediachange(struct ifnet *ifp) { struct wm_softc *sc = ifp->if_softc; struct ifmedia_entry *ife = sc->sc_mii.mii_media.ifm_cur; uint32_t status; int i; sc->sc_txcw = ife->ifm_data; if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO || (sc->sc_mii.mii_media.ifm_media & IFM_FLOW) != 0) sc->sc_txcw |= ANAR_X_PAUSE_SYM | ANAR_X_PAUSE_ASYM; sc->sc_txcw |= TXCW_ANE; CSR_WRITE(sc, WMREG_TXCW, sc->sc_txcw); delay(10000); /* NOTE: CTRL will update TFCE and RFCE automatically. */ sc->sc_tbi_anstate = 0; if ((CSR_READ(sc, WMREG_CTRL) & CTRL_SWDPIN(1)) == 0) { /* Have signal; wait for the link to come up. */ for (i = 0; i < 50; i++) { delay(10000); if (CSR_READ(sc, WMREG_STATUS) & STATUS_LU) break; } status = CSR_READ(sc, WMREG_STATUS); if (status & STATUS_LU) { /* Link is up. */ DPRINTF(WM_DEBUG_LINK, ("%s: LINK: set media -> link up %s\n", sc->sc_dev.dv_xname, (status & STATUS_FD) ? "FDX" : "HDX")); sc->sc_tctl &= ~TCTL_COLD(0x3ff); sc->sc_fcrtl &= ~FCRTL_XONE; if (status & STATUS_FD) sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_FDX); else sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_HDX); if (CSR_READ(sc, WMREG_CTRL) & CTRL_TFCE) sc->sc_fcrtl |= FCRTL_XONE; CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); CSR_WRITE(sc, (sc->sc_type < WM_T_82543) ? WMREG_OLD_FCRTL : WMREG_FCRTL, sc->sc_fcrtl); sc->sc_tbi_linkup = 1; } else { /* Link is down. */ DPRINTF(WM_DEBUG_LINK, ("%s: LINK: set media -> link down\n", sc->sc_dev.dv_xname)); sc->sc_tbi_linkup = 0; } } else { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: set media -> no signal\n", sc->sc_dev.dv_xname)); sc->sc_tbi_linkup = 0; } wm_tbi_set_linkled(sc); return (0); } /* * wm_tbi_set_linkled: * * Update the link LED on 1000BASE-X devices. */ static void wm_tbi_set_linkled(struct wm_softc *sc) { if (sc->sc_tbi_linkup) sc->sc_ctrl |= CTRL_SWDPIN(0); else sc->sc_ctrl &= ~CTRL_SWDPIN(0); CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); } /* * wm_tbi_check_link: * * Check the link on 1000BASE-X devices. */ static void wm_tbi_check_link(struct wm_softc *sc) { uint32_t rxcw, ctrl, status; if (sc->sc_tbi_anstate == 0) return; else if (sc->sc_tbi_anstate > 1) { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: anstate %d\n", sc->sc_dev.dv_xname, sc->sc_tbi_anstate)); sc->sc_tbi_anstate--; return; } sc->sc_tbi_anstate = 0; rxcw = CSR_READ(sc, WMREG_RXCW); ctrl = CSR_READ(sc, WMREG_CTRL); status = CSR_READ(sc, WMREG_STATUS); if ((status & STATUS_LU) == 0) { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: checklink -> down\n", sc->sc_dev.dv_xname)); sc->sc_tbi_linkup = 0; } else { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: checklink -> up %s\n", sc->sc_dev.dv_xname, (status & STATUS_FD) ? "FDX" : "HDX")); sc->sc_tctl &= ~TCTL_COLD(0x3ff); sc->sc_fcrtl &= ~FCRTL_XONE; if (status & STATUS_FD) sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_FDX); else sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_HDX); if (ctrl & CTRL_TFCE) sc->sc_fcrtl |= FCRTL_XONE; CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); CSR_WRITE(sc, (sc->sc_type < WM_T_82543) ? WMREG_OLD_FCRTL : WMREG_FCRTL, sc->sc_fcrtl); sc->sc_tbi_linkup = 1; } wm_tbi_set_linkled(sc); } /* * wm_gmii_reset: * * Reset the PHY. */ static void wm_gmii_reset(struct wm_softc *sc) { uint32_t reg; if (sc->sc_type >= WM_T_82544) { CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl | CTRL_PHY_RESET); delay(20000); CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); delay(20000); } else { /* The PHY reset pin is active-low. */ reg = CSR_READ(sc, WMREG_CTRL_EXT); reg &= ~((CTRL_EXT_SWDPIO_MASK << CTRL_EXT_SWDPIO_SHIFT) | CTRL_EXT_SWDPIN(4)); reg |= CTRL_EXT_SWDPIO(4); CSR_WRITE(sc, WMREG_CTRL_EXT, reg | CTRL_EXT_SWDPIN(4)); delay(10); CSR_WRITE(sc, WMREG_CTRL_EXT, reg); delay(10); CSR_WRITE(sc, WMREG_CTRL_EXT, reg | CTRL_EXT_SWDPIN(4)); delay(10); #if 0 sc->sc_ctrl_ext = reg | CTRL_EXT_SWDPIN(4); #endif } } /* * wm_gmii_mediainit: * * Initialize media for use on 1000BASE-T devices. */ static void wm_gmii_mediainit(struct wm_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; /* We have MII. */ sc->sc_flags |= WM_F_HAS_MII; sc->sc_tipg = TIPG_1000T_DFLT; /* * Let the chip set speed/duplex on its own based on * signals from the PHY. */ sc->sc_ctrl |= CTRL_SLU | CTRL_ASDE; CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); /* Initialize our media structures and probe the GMII. */ sc->sc_mii.mii_ifp = ifp; if (sc->sc_type >= WM_T_82544) { sc->sc_mii.mii_readreg = wm_gmii_i82544_readreg; sc->sc_mii.mii_writereg = wm_gmii_i82544_writereg; } else { sc->sc_mii.mii_readreg = wm_gmii_i82543_readreg; sc->sc_mii.mii_writereg = wm_gmii_i82543_writereg; } sc->sc_mii.mii_statchg = wm_gmii_statchg; wm_gmii_reset(sc); ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, wm_gmii_mediachange, wm_gmii_mediastatus); mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, MIIF_DOPAUSE); if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); } else ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); } /* * wm_gmii_mediastatus: [ifmedia interface function] * * Get the current interface media status on a 1000BASE-T device. */ static void wm_gmii_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) { struct wm_softc *sc = ifp->if_softc; mii_pollstat(&sc->sc_mii); ifmr->ifm_status = sc->sc_mii.mii_media_status; ifmr->ifm_active = (sc->sc_mii.mii_media_active & ~IFM_ETH_FMASK) | sc->sc_flowflags; } /* * wm_gmii_mediachange: [ifmedia interface function] * * Set hardware to newly-selected media on a 1000BASE-T device. */ static int wm_gmii_mediachange(struct ifnet *ifp) { struct wm_softc *sc = ifp->if_softc; if (ifp->if_flags & IFF_UP) mii_mediachg(&sc->sc_mii); return (0); } #define MDI_IO CTRL_SWDPIN(2) #define MDI_DIR CTRL_SWDPIO(2) /* host -> PHY */ #define MDI_CLK CTRL_SWDPIN(3) static void i82543_mii_sendbits(struct wm_softc *sc, uint32_t data, int nbits) { uint32_t i, v; v = CSR_READ(sc, WMREG_CTRL); v &= ~(MDI_IO|MDI_CLK|(CTRL_SWDPIO_MASK << CTRL_SWDPIO_SHIFT)); v |= MDI_DIR | CTRL_SWDPIO(3); for (i = 1 << (nbits - 1); i != 0; i >>= 1) { if (data & i) v |= MDI_IO; else v &= ~MDI_IO; CSR_WRITE(sc, WMREG_CTRL, v); delay(10); CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK); delay(10); CSR_WRITE(sc, WMREG_CTRL, v); delay(10); } } static uint32_t i82543_mii_recvbits(struct wm_softc *sc) { uint32_t v, i, data = 0; v = CSR_READ(sc, WMREG_CTRL); v &= ~(MDI_IO|MDI_CLK|(CTRL_SWDPIO_MASK << CTRL_SWDPIO_SHIFT)); v |= CTRL_SWDPIO(3); CSR_WRITE(sc, WMREG_CTRL, v); delay(10); CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK); delay(10); CSR_WRITE(sc, WMREG_CTRL, v); delay(10); for (i = 0; i < 16; i++) { data <<= 1; CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK); delay(10); if (CSR_READ(sc, WMREG_CTRL) & MDI_IO) data |= 1; CSR_WRITE(sc, WMREG_CTRL, v); delay(10); } CSR_WRITE(sc, WMREG_CTRL, v | MDI_CLK); delay(10); CSR_WRITE(sc, WMREG_CTRL, v); delay(10); return (data); } #undef MDI_IO #undef MDI_DIR #undef MDI_CLK /* * wm_gmii_i82543_readreg: [mii interface function] * * Read a PHY register on the GMII (i82543 version). */ static int wm_gmii_i82543_readreg(struct device *self, int phy, int reg) { struct wm_softc *sc = (void *) self; int rv; i82543_mii_sendbits(sc, 0xffffffffU, 32); i82543_mii_sendbits(sc, reg | (phy << 5) | (MII_COMMAND_READ << 10) | (MII_COMMAND_START << 12), 14); rv = i82543_mii_recvbits(sc) & 0xffff; DPRINTF(WM_DEBUG_GMII, ("%s: GMII: read phy %d reg %d -> 0x%04x\n", sc->sc_dev.dv_xname, phy, reg, rv)); return (rv); } /* * wm_gmii_i82543_writereg: [mii interface function] * * Write a PHY register on the GMII (i82543 version). */ static void wm_gmii_i82543_writereg(struct device *self, int phy, int reg, int val) { struct wm_softc *sc = (void *) self; i82543_mii_sendbits(sc, 0xffffffffU, 32); i82543_mii_sendbits(sc, val | (MII_COMMAND_ACK << 16) | (reg << 18) | (phy << 23) | (MII_COMMAND_WRITE << 28) | (MII_COMMAND_START << 30), 32); } /* * wm_gmii_i82544_readreg: [mii interface function] * * Read a PHY register on the GMII. */ static int wm_gmii_i82544_readreg(struct device *self, int phy, int reg) { struct wm_softc *sc = (void *) self; uint32_t mdic = 0; int i, rv; CSR_WRITE(sc, WMREG_MDIC, MDIC_OP_READ | MDIC_PHYADD(phy) | MDIC_REGADD(reg)); for (i = 0; i < 100; i++) { mdic = CSR_READ(sc, WMREG_MDIC); if (mdic & MDIC_READY) break; delay(10); } if ((mdic & MDIC_READY) == 0) { log(LOG_WARNING, "%s: MDIC read timed out: phy %d reg %d\n", sc->sc_dev.dv_xname, phy, reg); rv = 0; } else if (mdic & MDIC_E) { #if 0 /* This is normal if no PHY is present. */ log(LOG_WARNING, "%s: MDIC read error: phy %d reg %d\n", sc->sc_dev.dv_xname, phy, reg); #endif rv = 0; } else { rv = MDIC_DATA(mdic); if (rv == 0xffff) rv = 0; } return (rv); } /* * wm_gmii_i82544_writereg: [mii interface function] * * Write a PHY register on the GMII. */ static void wm_gmii_i82544_writereg(struct device *self, int phy, int reg, int val) { struct wm_softc *sc = (void *) self; uint32_t mdic = 0; int i; CSR_WRITE(sc, WMREG_MDIC, MDIC_OP_WRITE | MDIC_PHYADD(phy) | MDIC_REGADD(reg) | MDIC_DATA(val)); for (i = 0; i < 100; i++) { mdic = CSR_READ(sc, WMREG_MDIC); if (mdic & MDIC_READY) break; delay(10); } if ((mdic & MDIC_READY) == 0) log(LOG_WARNING, "%s: MDIC write timed out: phy %d reg %d\n", sc->sc_dev.dv_xname, phy, reg); else if (mdic & MDIC_E) log(LOG_WARNING, "%s: MDIC write error: phy %d reg %d\n", sc->sc_dev.dv_xname, phy, reg); } /* * wm_gmii_statchg: [mii interface function] * * Callback from MII layer when media changes. */ static void wm_gmii_statchg(struct device *self) { struct wm_softc *sc = (void *) self; struct mii_data *mii = &sc->sc_mii; sc->sc_ctrl &= ~(CTRL_TFCE | CTRL_RFCE); sc->sc_tctl &= ~TCTL_COLD(0x3ff); sc->sc_fcrtl &= ~FCRTL_XONE; /* * Get flow control negotiation result. */ if (IFM_SUBTYPE(mii->mii_media.ifm_cur->ifm_media) == IFM_AUTO && (mii->mii_media_active & IFM_ETH_FMASK) != sc->sc_flowflags) { sc->sc_flowflags = mii->mii_media_active & IFM_ETH_FMASK; mii->mii_media_active &= ~IFM_ETH_FMASK; } if (sc->sc_flowflags & IFM_FLOW) { if (sc->sc_flowflags & IFM_ETH_TXPAUSE) { sc->sc_ctrl |= CTRL_TFCE; sc->sc_fcrtl |= FCRTL_XONE; } if (sc->sc_flowflags & IFM_ETH_RXPAUSE) sc->sc_ctrl |= CTRL_RFCE; } if (sc->sc_mii.mii_media_active & IFM_FDX) { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: statchg: FDX\n", sc->sc_dev.dv_xname)); sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_FDX); } else { DPRINTF(WM_DEBUG_LINK, ("%s: LINK: statchg: HDX\n", sc->sc_dev.dv_xname)); sc->sc_tctl |= TCTL_COLD(TX_COLLISION_DISTANCE_HDX); } CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl); CSR_WRITE(sc, WMREG_TCTL, sc->sc_tctl); CSR_WRITE(sc, (sc->sc_type < WM_T_82543) ? WMREG_OLD_FCRTL : WMREG_FCRTL, sc->sc_fcrtl); }