/* $NetBSD: btvmeii.c,v 1.10 2005/02/04 02:10:45 perry Exp $ */ /* * Copyright (c) 1999 * Matthias Drochner. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Driver for the Bit3/SBS PCI-VME adapter Model 2706. * Uses the common Tundra Universe code. */ #include __KERNEL_RCSID(0, "$NetBSD: btvmeii.c,v 1.10 2005/02/04 02:10:45 perry Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int b3_2706_match(struct device *, struct cfdata *, void *); static void b3_2706_attach(struct device *, struct device *, void *); /* exported via tag structs */ int b3_2706_map_vme(void *, vme_addr_t, vme_size_t, vme_am_t, vme_datasize_t, vme_swap_t, bus_space_tag_t *, bus_space_handle_t *, vme_mapresc_t*); void b3_2706_unmap_vme(void *, vme_mapresc_t); int b3_2706_vme_probe(void *, vme_addr_t, vme_size_t, vme_am_t, vme_datasize_t, int (*)(void *, bus_space_tag_t, bus_space_handle_t), void *); int b3_2706_map_vmeint(void *, int, int, vme_intr_handle_t *); void *b3_2706_establish_vmeint(void *, vme_intr_handle_t, int, int (*)(void *), void *); void b3_2706_disestablish_vmeint(void *, void *); void b3_2706_vmeint(void *, int, int); int b3_2706_dmamap_create(void *, vme_size_t, vme_am_t, vme_datasize_t, vme_swap_t, int, vme_size_t, vme_addr_t, int, bus_dmamap_t *); void b3_2706_dmamap_destroy(void *, bus_dmamap_t); int b3_2706_dmamem_alloc(void *, vme_size_t, vme_am_t, vme_datasize_t, vme_swap_t, bus_dma_segment_t *, int, int *, int); void b3_2706_dmamem_free(void *, bus_dma_segment_t *, int); struct b3_2706_vmemaprescs { int wnd; unsigned long pcibase, maplen; bus_space_handle_t handle; u_int32_t len; }; struct b3_2706_vmeintrhand { TAILQ_ENTRY(b3_2706_vmeintrhand) ih_next; int (*ih_fun)(void*); void *ih_arg; int ih_level; int ih_vector; int ih_prior; u_long ih_count; }; struct b3_2706_softc { struct device sc_dev; struct univ_pci_data univdata; bus_space_tag_t swapt, vmet; bus_space_handle_t swaph; bus_addr_t vmepbase; int windowused[8]; struct b3_2706_vmemaprescs vmemaprescs[8]; struct extent *vmeext; char vmemap[EXTENT_FIXED_STORAGE_SIZE(8)]; struct vme_chipset_tag sc_vct; /* list of VME interrupt handlers */ TAILQ_HEAD(, b3_2706_vmeintrhand) intrhdls; int strayintrs; }; CFATTACH_DECL(btvmeii, sizeof(struct b3_2706_softc), b3_2706_match, b3_2706_attach, NULL, NULL); /* * The adapter consists of a DEC PCI-PCI-bridge with two * PCI devices behind it: A Tundra Universe as device 4 and * some FPGA with glue logics as device 8. * As long as the autoconf code doesn't provide more support * for dependant devices, we have to duplicate a part of the * "ppb" functions here. */ static int b3_2706_match(parent, match, aux) struct device *parent; struct cfdata *match; void *aux; { struct pci_attach_args *pa = aux; pci_chipset_tag_t pc = pa->pa_pc; int secbus; pcitag_t tag; pcireg_t id; if ((PCI_VENDOR(pa->pa_id) != PCI_VENDOR_DEC) || (PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_DEC_21152)) return (0); secbus = PPB_BUSINFO_SECONDARY(pci_conf_read(pc, pa->pa_tag, PPB_REG_BUSINFO)); if (secbus == 0) { printf("b3_2706_match: ppb not configured\n"); return (0); } tag = pci_make_tag(pc, secbus, 4, 0); id = pci_conf_read(pc, tag, PCI_ID_REG); if ((PCI_VENDOR(id) != PCI_VENDOR_NEWBRIDGE) || (PCI_PRODUCT(id) != PCI_PRODUCT_NEWBRIDGE_CA91CX42)) { #ifdef DEBUG printf("b3_2706_match: no tundra\n"); #endif return (0); } tag = pci_make_tag(pc, secbus, 8, 0); id = pci_conf_read(pc, tag, PCI_ID_REG); if ((PCI_VENDOR(id) != PCI_VENDOR_BIT3) || (PCI_PRODUCT(id) != PCI_PRODUCT_BIT3_PCIVME2706)) { #ifdef DEBUG printf("b3_2706_match: no bit3 chip\n"); #endif return (0); } return (5); /* beat "ppb" */ } static void b3_2706_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct b3_2706_softc *sc = (struct b3_2706_softc *)self; struct pci_attach_args *pa = aux; pci_chipset_tag_t pc = pa->pa_pc; struct pci_attach_args aa; int secbus; pcireg_t intr; pcitag_t tag; bus_addr_t swappbase; int i; struct vmebus_attach_args vaa; aprint_naive(": VME bus adapter\n"); aprint_normal("\n"); secbus = PPB_BUSINFO_SECONDARY(pci_conf_read(pc, pa->pa_tag, PPB_REG_BUSINFO)); memcpy(&aa, pa, sizeof(struct pci_attach_args)); aa.pa_device = 4; aa.pa_function = 0; aa.pa_tag = pci_make_tag(pc, secbus, 4, 0); aa.pa_intrswiz += 4; intr = pci_conf_read(pc, aa.pa_tag, PCI_INTERRUPT_REG); /* * swizzle it based on the number of * busses we're behind and our device * number. */ aa.pa_intrpin = ((1 + aa.pa_intrswiz - 1) % 4) + 1; aa.pa_intrline = PCI_INTERRUPT_LINE(intr); if (univ_pci_attach(&sc->univdata, &aa, self->dv_xname, b3_2706_vmeint, sc)) { aprint_error("%s: error initializing universe chip\n", self->dv_xname); return; } /* * don't waste KVM - the byteswap register is aliased in * a 512k window, we need it only once */ tag = pci_make_tag(pc, secbus, 8, 0); sc->swapt = pa->pa_memt; if (pci_mapreg_info(pc, tag, 0x10, PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT, &swappbase, 0, 0) || bus_space_map(sc->swapt, swappbase, 4, 0, &sc->swaph)) { aprint_error("%s: can't map byteswap register\n", self->dv_xname); return; } /* * Set up cycle specific byteswap mode. * XXX Readback yields "all-ones" for me, and it doesn't seem * to matter what I write into the register - the data don't * get swapped. Adapter fault or documentation bug? */ bus_space_write_4(sc->swapt, sc->swaph, 0, 0x00000490); /* VME space is mapped as needed */ sc->vmet = pa->pa_memt; if (pci_mapreg_info(pc, tag, 0x14, PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT, &sc->vmepbase, 0, 0)) { aprint_error("%s: VME range not assigned\n", self->dv_xname); return; } #ifdef BIT3DEBUG aprint_debug("%s: VME window @%lx\n", self->dv_xname, (long)sc->vmepbase); #endif for (i = 0; i < 8; i++) { sc->windowused[i] = 0; } sc->vmeext = extent_create("pcivme", sc->vmepbase, sc->vmepbase + 32*1024*1024 - 1, M_DEVBUF, sc->vmemap, sizeof(sc->vmemap), EX_NOCOALESCE); sc->sc_vct.cookie = self; sc->sc_vct.vct_probe = b3_2706_vme_probe; sc->sc_vct.vct_map = b3_2706_map_vme; sc->sc_vct.vct_unmap = b3_2706_unmap_vme; sc->sc_vct.vct_int_map = b3_2706_map_vmeint; sc->sc_vct.vct_int_establish = b3_2706_establish_vmeint; sc->sc_vct.vct_int_disestablish = b3_2706_disestablish_vmeint; sc->sc_vct.vct_dmamap_create = b3_2706_dmamap_create; sc->sc_vct.vct_dmamap_destroy = b3_2706_dmamap_destroy; sc->sc_vct.vct_dmamem_alloc = b3_2706_dmamem_alloc; sc->sc_vct.vct_dmamem_free = b3_2706_dmamem_free; vaa.va_vct = &(sc->sc_vct); vaa.va_bdt = pa->pa_dmat; /* XXX */ vaa.va_slaveconfig = 0; /* XXX CSR window? */ config_found(self, &vaa, 0); } #define sc ((struct b3_2706_softc*)vsc) int b3_2706_map_vme(vsc, vmeaddr, len, am, datasizes, swap, tag, handle, resc) void *vsc; vme_addr_t vmeaddr; vme_size_t len; vme_am_t am; vme_datasize_t datasizes; vme_swap_t swap; bus_space_tag_t *tag; bus_space_handle_t *handle; vme_mapresc_t *resc; { int idx, i, wnd, res; unsigned long boundary, maplen, pcibase; vme_addr_t vmebase, vmeend; static int windoworder[8] = {1, 2, 3, 5, 6, 7, 0, 4}; /* prefer windows with fine granularity for small mappings */ wnd = -1; if (len <= 32*1024) idx = 6; else idx = 0; for (i = 0; i < 8; i++) { if (!sc->windowused[windoworder[idx]]) { wnd = windoworder[idx]; sc->windowused[wnd] = 1; break; } idx = (idx + 1) % 8; } if (wnd == -1) return (ENOSPC); boundary = (wnd & 3) ? 64*1024 : 4*1024; /* first mapped address */ vmebase = vmeaddr & ~(boundary - 1); /* base of last mapped page */ vmeend = (vmeaddr + len - 1) & ~(boundary - 1); /* bytes in outgoing window required */ maplen = vmeend - vmebase + boundary; if (extent_alloc(sc->vmeext, maplen, boundary, 0, EX_FAST, &pcibase)) { sc->windowused[wnd] = 0; return (ENOMEM); } res = univ_pci_mapvme(&sc->univdata, wnd, vmebase, maplen, am, datasizes, pcibase); if (res) { extent_free(sc->vmeext, pcibase, maplen, 0); sc->windowused[wnd] = 0; return (res); } res = bus_space_map(sc->vmet, pcibase + (vmeaddr - vmebase), len, 0, handle); if (res) { univ_pci_unmapvme(&sc->univdata, wnd); extent_free(sc->vmeext, pcibase, maplen, 0); sc->windowused[wnd] = 0; return (res); } *tag = sc->vmet; /* * save all data needed for later unmapping */ sc->vmemaprescs[wnd].wnd = wnd; sc->vmemaprescs[wnd].pcibase = pcibase; sc->vmemaprescs[wnd].maplen = maplen; sc->vmemaprescs[wnd].handle = *handle; sc->vmemaprescs[wnd].len = len; *resc = &sc->vmemaprescs[wnd]; return (0); } void b3_2706_unmap_vme(vsc, resc) void *vsc; vme_mapresc_t resc; { struct b3_2706_vmemaprescs *r = resc; bus_space_unmap(sc->vmet, r->handle, r->len); extent_free(sc->vmeext, r->pcibase, r->maplen, 0); if (!sc->windowused[r->wnd]) panic("b3_2706_unmap_vme: bad window"); univ_pci_unmapvme(&sc->univdata, r->wnd); sc->windowused[r->wnd] = 0; } int b3_2706_vme_probe(vsc, addr, len, am, datasize, callback, cbarg) void *vsc; vme_addr_t addr; vme_size_t len; vme_am_t am; vme_datasize_t datasize; int (*callback)(void *, bus_space_tag_t, bus_space_handle_t); void *cbarg; { bus_space_tag_t tag; bus_space_handle_t handle; vme_mapresc_t resc; int res, i; volatile u_int32_t dummy; res = b3_2706_map_vme(vsc, addr, len, am, datasize, 0, &tag, &handle, &resc); if (res) return (res); if (univ_pci_vmebuserr(&sc->univdata, 1)) printf("b3_2706_vme_badaddr: TA bit not clean - reset\n"); if (callback) res = (*callback)(cbarg, tag, handle); else { for (i = 0; i < len;) { switch (datasize) { case VME_D8: dummy = bus_space_read_1(tag, handle, i); i++; break; case VME_D16: dummy = bus_space_read_2(tag, handle, i); i += 2; break; case VME_D32: dummy = bus_space_read_4(tag, handle, i); i += 4; break; default: panic("b3_2706_vme_probe: invalid datasize %x", datasize); } } } if (univ_pci_vmebuserr(&sc->univdata, 0)) { #ifdef BIT3DEBUG printf("b3_2706_vme_badaddr: caught TA\n"); #endif univ_pci_vmebuserr(&sc->univdata, 1); res = EIO; } b3_2706_unmap_vme(vsc, resc); return (res); } int b3_2706_map_vmeint(vsc, level, vector, handlep) void *vsc; int level, vector; vme_intr_handle_t *handlep; { *handlep = (void *)(long)((level << 8) | vector); /* XXX */ return (0); } void * b3_2706_establish_vmeint(vsc, handle, prior, func, arg) void *vsc; vme_intr_handle_t handle; int prior; int (*func)(void *); void *arg; { struct b3_2706_vmeintrhand *ih; long lv; int s; /* no point in sleeping unless someone can free memory. */ ih = malloc(sizeof *ih, M_DEVBUF, cold ? M_NOWAIT : M_WAITOK); if (ih == NULL) panic("b3_2706_map_vmeint: can't malloc handler info"); lv = (long)handle; /* XXX */ ih->ih_fun = func; ih->ih_arg = arg; ih->ih_level = lv >> 8; ih->ih_vector = lv & 0xff; ih->ih_prior = prior; ih->ih_count = 0; s = splhigh(); TAILQ_INSERT_TAIL(&(sc->intrhdls), ih, ih_next); splx(s); return (ih); } void b3_2706_disestablish_vmeint(vsc, cookie) void *vsc; void *cookie; { struct b3_2706_vmeintrhand *ih = cookie; int s; if (!ih) { printf("b3_2706_unmap_vmeint: NULL arg\n"); return; } s = splhigh(); TAILQ_REMOVE(&(sc->intrhdls), ih, ih_next); splx(s); free(ih, M_DEVBUF); } void b3_2706_vmeint(vsc, level, vector) void *vsc; int level, vector; { struct b3_2706_vmeintrhand *ih; int found; #ifdef BIT3DEBUG printf("b3_2706_vmeint: VME IRQ %d, vec %x\n", level, vector); #endif found = 0; for (ih = sc->intrhdls.tqh_first; ih; ih = ih->ih_next.tqe_next) { if ((ih->ih_level == level) && ((ih->ih_vector == -1) || (ih->ih_vector == vector))) { int s, res; /* * We should raise the interrupt level * to ih->ih_prior here. How to do this * machine-independantly? * To be safe, raise to the maximum. */ s = splhigh(); found |= (res = (*(ih->ih_fun))(ih->ih_arg)); splx(s); if (res) ih->ih_count++; if (res == 1) break; } } if (!found) sc->strayintrs++; } int b3_2706_dmamap_create(vsc, len, am, datasize, swap, nsegs, segsz, bound, flags, mapp) void *vsc; vme_size_t len; vme_am_t am; vme_datasize_t datasize; vme_swap_t swap; int nsegs; vme_size_t segsz; vme_addr_t bound; int flags; bus_dmamap_t *mapp; { return (EINVAL); } void b3_2706_dmamap_destroy(vsc, map) void *vsc; bus_dmamap_t map; { } int b3_2706_dmamem_alloc(vsc, len, am, datasizes, swap, segs, nsegs, rsegs, flags) void *vsc; vme_size_t len; vme_am_t am; vme_datasize_t datasizes; vme_swap_t swap; bus_dma_segment_t *segs; int nsegs; int *rsegs; int flags; { return (EINVAL); } void b3_2706_dmamem_free(vsc, segs, nsegs) void *vsc; bus_dma_segment_t *segs; int nsegs; { } #undef sc