/* $NetBSD: sunscpalreg.h,v 1.1 2001/04/20 16:35:22 fredette Exp $ */ /*- * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Matthew Fredette. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Macros for accessing the registers in the Sun "Sun-2" "sc" * PAL+logic sequencer chips. */ /* * Interface Control Register. * * This register pretty much just reflects the state of the SCSI * bus, directly. For example, the _COMMAND_DATA, _MESSAGE, * and _INPUT_OUTPUT bits and their values correspond directly * to SCSI bus signals. * * Note: * (r) indicates bit is read only. * (rw) indicates bit is read or write. */ #define SUNSCPAL_ICR_PARITY_ERROR 0x8000 /* (r) parity error */ #define SUNSCPAL_ICR_BUS_ERROR 0x4000 /* (r) bus error */ #define SUNSCPAL_ICR_ODD_LENGTH 0x2000 /* (r) odd length */ #define SUNSCPAL_ICR_INTERRUPT_REQUEST 0x1000 /* (r) interrupt request */ #define SUNSCPAL_ICR_REQUEST 0x0800 /* (r) request */ #define SUNSCPAL_ICR_MESSAGE 0x0400 /* (r) message */ #define SUNSCPAL_ICR_COMMAND_DATA 0x0200 /* (r) 1=command, 0=data */ #define SUNSCPAL_ICR_INPUT_OUTPUT 0x0100 /* (r) 1=input (initiator should read), 0=output */ #define SUNSCPAL_ICR_PARITY 0x0080 /* (r) parity */ #define SUNSCPAL_ICR_BUSY 0x0040 /* (r) busy */ #define SUNSCPAL_ICR_SELECT 0x0020 /* (rw) select */ #define SUNSCPAL_ICR_RESET 0x0010 /* (rw) reset */ #define SUNSCPAL_ICR_PARITY_ENABLE 0x0008 /* (rw) enable parity */ #define SUNSCPAL_ICR_WORD_MODE 0x0004 /* (rw) word mode */ #define SUNSCPAL_ICR_DMA_ENABLE 0x0002 /* (rw) enable DMA */ #define SUNSCPAL_ICR_INTERRUPT_ENABLE 0x0001 /* (rw) enable interrupts */ /* * This chip keeps its DMA count with its bits flipped. Normally, you * would just use the ~ operator everywhere. However, apparently that * operator doesn't always work as you would expect, i.e.: * * #include * int main() { * unsigned short x; * int y; * x = 0; * y = ~x; * printf("%d\n", y); * } * * prints -1, not 65535. So this macro does the bit-flipping * carefully for you. */ #define SUNSCPAL_DMA_COUNT_FLIP(x) (((unsigned short) (x)) ^ 0xFFFF)