/* $NetBSD: locore.h,v 1.13 1998/04/23 10:31:02 jonathan Exp $ */ /* * Copyright 1996 The Board of Trustees of The Leland Stanford * Junior University. All Rights Reserved. * * Permission to use, copy, modify, and distribute this * software and its documentation for any purpose and without * fee is hereby granted, provided that the above copyright * notice appear in all copies. Stanford University * makes no representations about the suitability of this * software for any purpose. It is provided "as is" without * express or implied warranty. */ /* * Jump table for MIPS cpu locore functions that are implemented * differently on different generations, or instruction-level * archtecture (ISA) level, the Mips family. * The following functions must be provided for each mips ISA level: * * * MachConfigCache * MachFlushCache * MachFlushDCache * MachFlushICache * MachForceCacheUpdate * MachSetPID * MachTLBFlush * MachTLBFlushAddr __P() * MachTLBUpdate (u_int, (pt_entry_t?) u_int); * wbflush * proc_trampoline() * switch_exit() * cpu_switch_resume() * * We currently provide support for: * * r2000 and r3000 (mips ISA-I) * r4000 and r4400 in 32-bit mode (mips ISA-III?) */ #ifndef _MIPS_LOCORE_H #define _MIPS_LOCORE_H /* * locore service routine for exeception vectors. Used outside locore * only to print them by name in stack tracebacks */ extern void mips1_ConfigCache __P((void)); extern void mips1_FlushCache __P((void)); extern void mips1_FlushDCache __P((vm_offset_t addr, vm_offset_t len)); extern void mips1_FlushICache __P((vm_offset_t addr, vm_offset_t len)); extern void mips1_ForceCacheUpdate __P((void)); extern void mips1_SetPID __P((int pid)); extern void mips1_TLBFlush __P((void)); extern void mips1_TLBFlushAddr __P( /* XXX Really pte highpart ? */ (vm_offset_t addr)); extern int mips1_TLBUpdate __P((u_int, /*pt_entry_t*/ u_int)); extern void mips1_TLBWriteIndexed __P((u_int index, u_int high, u_int low)); extern void mips1_wbflush __P((void)); extern void mips1_proc_trampoline __P((void)); extern void mips1_switch_exit __P((struct proc *)); extern void mips1_cpu_switch_resume __P((void)); extern void mips3_ConfigCache __P((void)); extern void mips3_FlushCache __P((void)); extern void mips3_FlushDCache __P((vm_offset_t addr, vm_offset_t len)); extern void mips3_FlushICache __P((vm_offset_t addr, vm_offset_t len)); extern void mips3_ForceCacheUpdate __P((void)); extern void mips3_HitFlushDCache __P((vm_offset_t, int)); extern void mips3_SetPID __P((int pid)); extern void mips3_TLBFlush __P((void)); extern void mips3_TLBFlushAddr __P( /* XXX Really pte highpart ? */ (vm_offset_t addr)); extern int mips3_TLBUpdate __P((u_int, /*pt_entry_t*/ u_int)); extern void mips3_TLBWriteIndexedVPS __P((u_int index, void *tlb)); extern void mips3_TLBWriteIndexed __P((u_int index, u_int high, u_int lo0, u_int lo1)); extern void mips3_wbflush __P((void)); extern void mips3_proc_trampoline __P((void)); extern void mips3_switch_exit __P((struct proc *)); extern void mips3_cpu_switch_resume __P((void)); extern void mips3_SetWIRED __P((int)); /* * A vector with an entry for each mips-ISA-level dependent * locore function, and macros which jump through it. * XXX the macro names are chosen to be compatible with the old * Sprite coding-convention names used in 4.4bsd/pmax. */ typedef struct { void (*configCache) __P((void)); void (*flushCache) __P((void)); void (*flushDCache) __P((vm_offset_t addr, vm_offset_t len)); void (*flushICache) __P((vm_offset_t addr, vm_offset_t len)); void (*forceCacheUpdate) __P((void)); void (*setTLBpid) __P((int pid)); void (*tlbFlush) __P((void)); void (*tlbFlushAddr) __P((vm_offset_t)); /* XXX Really pte highpart ? */ int (*tlbUpdate) __P((u_int highreg, u_int lowreg)); void (*wbflush) __P((void)); void (*proc_trampoline) __P((void)); void (*mips_switch_exit) __P((struct proc *)); void (*cpu_switch_resume) __P((void)); } mips_locore_jumpvec_t; /* Override writebuffer-drain method. */ void mips_set_wbflush __P((void (*) __P((void)) )); /* * The "active" locore-fuction vector, and */ extern mips_locore_jumpvec_t mips_locore_jumpvec; extern mips_locore_jumpvec_t r2000_locore_vec; extern mips_locore_jumpvec_t r4000_locore_vec; #if defined(MIPS3) && !defined (MIPS1) #define MachConfigCache mips3_ConfigCache #define MachFlushCache mips3_FlushCache #define MachFlushDCache mips3_FlushDCache #define MachFlushICache mips3_FlushICache #define MachForceCacheUpdate mips3_ForceCacheUpdate #define MachSetPID mips3_SetPID #define MachTLBFlush mips3_TLBFlush #define MachTLBFlushAddr mips3_TLBFlushAddr #define MachTLBUpdate mips3_TLBUpdate #define wbflush mips3_wbflush #define proc_trampoline mips3_proc_trampoline #define switch_exit mips3_switch_exit #endif #if !defined(MIPS3) && defined (MIPS1) #define MachConfigCache mips1_ConfigCache #define MachFlushCache mips1_FlushCache #define MachFlushDCache mips1_FlushDCache #define MachFlushICache mips1_FlushICache #define MachForceCacheUpdate mips1_ForceCacheUpdate #define MachSetPID mips1_SetPID #define MachTLBFlush mips1_TLBFlush #define MachTLBFlushAddr mips1_TLBFlushAddr #define MachTLBUpdate mips1_TLBUpdate #define wbflush mips1_wbflush #define proc_trampoline mips1_proc_trampoline #define switch_exit mips1_switch_exit #endif #if defined(MIPS3) && defined (MIPS1) #define MachConfigCache (*(mips_locore_jumpvec.configCache)) #define MachFlushCache (*(mips_locore_jumpvec.flushCache)) #define MachFlushDCache (*(mips_locore_jumpvec.flushDCache)) #define MachFlushICache (*(mips_locore_jumpvec.flushICache)) #define MachForceCacheUpdate (*(mips_locore_jumpvec.forceCacheUpdate)) #define MachSetPID (*(mips_locore_jumpvec.setTLBpid)) #define MachTLBFlush (*(mips_locore_jumpvec.tlbFlush)) #define MachTLBFlushAddr (*(mips_locore_jumpvec.tlbFlushAddr)) #define MachTLBUpdate (*(mips_locore_jumpvec.tlbUpdate)) #define wbflush (*(mips_locore_jumpvec.wbflush)) #define proc_trampoline (mips_locore_jumpvec.proc_trampoline) #define switch_exit (*(mips_locore_jumpvec.mips_switch_exit)) #endif /* cpu_switch_resume not called directly */ /* * CPU identification, from PRID register. */ union cpuprid { int cpuprid; struct { #if BYTE_ORDER == BIG_ENDIAN u_int pad1:16; /* reserved */ u_int cp_imp:8; /* implementation identifier */ u_int cp_majrev:4; /* major revision identifier */ u_int cp_minrev:4; /* minor revision identifier */ #else u_int cp_minrev:4; /* minor revision identifier */ u_int cp_majrev:4; /* major revision identifier */ u_int cp_imp:8; /* implementation identifier */ u_int pad1:16; /* reserved */ #endif } cpu; }; #ifdef _KERNEL /* * Global variables used to communicate CPU type, and parameters * such as cache size, from locore to higher-level code (e.g., pmap). */ extern union cpuprid cpu_id; extern union cpuprid fpu_id; extern int cpu_arch; extern u_int mips_L1DataCacheSize; extern u_int mips_L1InstCacheSize; extern u_int mips_L1DataCacheLSize; extern u_int mips_L1InstCacheLSize; extern u_int mips_L2CacheSize; extern u_int mips_L2CacheLSize; extern u_int mips_CacheAliasMask; extern struct intr_tab intr_tab[]; #endif #endif /* _MIPS_LOCORE_H */