# dhcpd.conf
#
# Configuration file for ISC dhcpd
#

# Hosts with more than one interface MUST specify a ``server-identifier'',
# which should be the IP address of the server's primary network interface,
# or if there is no interface that can be described that way, at least an
# interface whose address isn't likely to change.

server-identifier toccata.fugue.com;

# option definitions common to all supported networks...
option domain-name "fugue.com";
option domain-name-servers toccata.fugue.com;

# Shared network declaration is used to group subnets which share the same
# physical network together.   The name is specified so that the shared
# network can be referred to in log messages - it serves no other function.

shared-network FUGUE {

# option definitions common to this shared network.
  option subnet-mask 255.255.255.224;
  default-lease-time 600;
  max-lease-time 7200;

# One of the two IP subnets that share this physical network
#
# Address ranges can be specified for each subnet attached to
# a shared network.   Since these subnets share the same physical
# network, addresses are pooled together, and assignments are made
# without regard to the actual subnet.   If the optional dynamic-bootp
# keyword is given in the address range declaration, then addresses
# in that range can be assigned either with the DHCP protocol or the
# BOOTP protocol; otherwise, only DHCP clients will have addresses
# allocated from the address range.
#
# Note that each IP subnet can have its own options specific to that subnet.
# options that aren't specified in the subnet are taken from the shared
# network (if any) and then from the global option list.

  subnet 204.254.239.0 netmask 255.255.255.224 {
    range 204.254.239.10 204.254.239.20;
    option broadcast-address 204.254.239.31;
    option routers prelude.fugue.com;
  }

# The other subnet that shares this physical network
  subnet 204.254.239.32 netmask 255.255.255.224 {
    range dynamic-bootp 204.254.239.10 204.254.239.20;
    option broadcast-address 204.254.239.31;
    option routers snarg.fugue.com;
  }
}

# IP subnets that are alone on their physical wire should be declared by
# themselves.   ISC dhcpd may still refer to them as shared networks in
# log messages, but this is simply an artifact of the underlying data
# structures.
#
# Note that options can be specified in the subnet declaration which
# supersede the global options specified earlier.

subnet 192.5.5.0 netmask 255.255.255.224 {
  range 192.5.5.26 192.5.5.30;
  option name-servers bb.home.vix.com, gw.home.vix.com;
  option domain-name "vix.com";
  option routers 192.5.5.1;
  option subnet-mask 255.255.255.224;
  option broadcast-address 192.5.5.31;
  default-lease-time 600;
  max-lease-time 7200;
}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

host passacaglia {
  hardware ethernet 0:0:c0:5d:bd:95;
  filename "vmunix.passacaglia";
  server-name "toccata.fugue.com";
}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
host fantasia {
  hardware ethernet 08:00:07:26:c0:a5;
  fixed-address fantasia.fugue.com;
}

# If a DHCP or BOOTP client is mobile and might be connected to a variety
# of networks, more than one fixed address for that host can be specified.
# Hosts can have fixed addresses on some networks, but receive dynamically
# allocated address on other subnets; in order to support this, a host
# declaration for that client must be given which does not have a fixed
# address.   If a client should get different parameters depending on
# what subnet it boots on, host declarations for each such network should
# be given.   Finally, if a domain name is given for a host's fixed address
# and that domain name evaluates to more than one address, the address
# corresponding to the network to which the client is attached, if any,
# will be assigned.
host confusia {
  hardware ethernet 02:03:04:05:06:07;
  fixed-address confusia-1.fugue.com, confusia-2.fugue.com;
  filename "vmunix.confusia";
  server-name "toccata.fugue.com";
}

host confusia {
  hardware ethernet 02:03:04:05:06:07;
  fixed-address confusia-3.fugue.com;
  filename "vmunix.confusia";
  server-name "snarg.fugue.com";
}

host confusia {
  hardware ethernet 02:03:04:05:06:07;
  filename "vmunix.confusia";
  server-name "bb.home.vix.com";
}