/* $NetBSD: iha.c,v 1.29 2005/05/30 04:43:46 christos Exp $ */ /*- * Device driver for the INI-9XXXU/UW or INIC-940/950 PCI SCSI Controller. * * Written for 386bsd and FreeBSD by * Winston Hung * * Copyright (c) 1997-1999 Initio Corp. * Copyright (c) 2000, 2001 Ken Westerback * Copyright (c) 2001, 2002 Izumi Tsutsui * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR OR HIS RELATIVES BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF MIND, USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /* * Ported to NetBSD by Izumi Tsutsui from OpenBSD: * $OpenBSD: iha.c,v 1.3 2001/02/20 00:47:33 krw Exp $ */ #include __KERNEL_RCSID(0, "$NetBSD: iha.c,v 1.29 2005/05/30 04:43:46 christos Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * SCSI Rate Table, indexed by FLAG_SCSI_RATE field of * tcs flags. */ static const uint8_t iha_rate_tbl[] = { /* fast 20 */ /* nanosecond divide by 4 */ 12, /* 50ns, 20M */ 18, /* 75ns, 13.3M */ 25, /* 100ns, 10M */ 31, /* 125ns, 8M */ 37, /* 150ns, 6.6M */ 43, /* 175ns, 5.7M */ 50, /* 200ns, 5M */ 62 /* 250ns, 4M */ }; #define IHA_MAX_PERIOD 62 #ifdef notused static uint16_t eeprom_default[EEPROM_SIZE] = { /* -- Header ------------------------------------ */ /* signature */ EEP_SIGNATURE, /* size, revision */ EEP_WORD(EEPROM_SIZE * 2, 0x01), /* -- Host Adapter Structure -------------------- */ /* model */ 0x0095, /* model info, number of channel */ EEP_WORD(0x00, 1), /* BIOS config */ EEP_BIOSCFG_DEFAULT, /* host adapter config */ 0, /* -- eeprom_adapter[0] ------------------------------- */ /* ID, adapter config 1 */ EEP_WORD(7, CFG_DEFAULT), /* adapter config 2, number of targets */ EEP_WORD(0x00, 8), /* target flags */ EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), /* -- eeprom_adapter[1] ------------------------------- */ /* ID, adapter config 1 */ EEP_WORD(7, CFG_DEFAULT), /* adapter config 2, number of targets */ EEP_WORD(0x00, 8), /* target flags */ EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), EEP_WORD(FLAG_DEFAULT, FLAG_DEFAULT), /* reserved[5] */ 0, 0, 0, 0, 0, /* checksum */ 0 }; #endif static void iha_append_free_scb(struct iha_softc *, struct iha_scb *); static void iha_append_done_scb(struct iha_softc *, struct iha_scb *, uint8_t); static __inline struct iha_scb *iha_pop_done_scb(struct iha_softc *); static struct iha_scb *iha_find_pend_scb(struct iha_softc *); static __inline void iha_append_pend_scb(struct iha_softc *, struct iha_scb *); static __inline void iha_push_pend_scb(struct iha_softc *, struct iha_scb *); static __inline void iha_del_pend_scb(struct iha_softc *, struct iha_scb *); static __inline void iha_mark_busy_scb(struct iha_scb *); static __inline void iha_set_ssig(struct iha_softc *, uint8_t, uint8_t); static int iha_alloc_sglist(struct iha_softc *); static void iha_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t, void *); static void iha_update_xfer_mode(struct iha_softc *, int); static void iha_reset_scsi_bus(struct iha_softc *); static void iha_reset_chip(struct iha_softc *); static void iha_reset_dma(struct iha_softc *); static void iha_reset_tcs(struct tcs *, uint8_t); static void iha_main(struct iha_softc *); static void iha_scsi(struct iha_softc *); static void iha_select(struct iha_softc *, struct iha_scb *, uint8_t); static int iha_wait(struct iha_softc *, uint8_t); static void iha_exec_scb(struct iha_softc *, struct iha_scb *); static void iha_done_scb(struct iha_softc *, struct iha_scb *); static int iha_push_sense_request(struct iha_softc *, struct iha_scb *); static void iha_timeout(void *); static void iha_abort_xs(struct iha_softc *, struct scsipi_xfer *, uint8_t); static uint8_t iha_data_over_run(struct iha_scb *); static int iha_next_state(struct iha_softc *); static int iha_state_1(struct iha_softc *); static int iha_state_2(struct iha_softc *); static int iha_state_3(struct iha_softc *); static int iha_state_4(struct iha_softc *); static int iha_state_5(struct iha_softc *); static int iha_state_6(struct iha_softc *); static int iha_state_8(struct iha_softc *); static int iha_xfer_data(struct iha_softc *, struct iha_scb *, int); static int iha_xpad_in(struct iha_softc *); static int iha_xpad_out(struct iha_softc *); static int iha_status_msg(struct iha_softc *); static void iha_busfree(struct iha_softc *); static int iha_resel(struct iha_softc *); static int iha_msgin(struct iha_softc *); static int iha_msgin_extended(struct iha_softc *); static int iha_msgin_sdtr(struct iha_softc *); static int iha_msgin_ignore_wid_resid(struct iha_softc *); static int iha_msgout(struct iha_softc *, uint8_t); static void iha_msgout_abort(struct iha_softc *, uint8_t); static int iha_msgout_reject(struct iha_softc *); static int iha_msgout_extended(struct iha_softc *); static int iha_msgout_wdtr(struct iha_softc *); static int iha_msgout_sdtr(struct iha_softc *); static void iha_wide_done(struct iha_softc *); static void iha_sync_done(struct iha_softc *); static void iha_bad_seq(struct iha_softc *); static void iha_read_eeprom(struct iha_softc *, struct iha_eeprom *); static int iha_se2_rd_all(struct iha_softc *, uint16_t *); static void iha_se2_instr(struct iha_softc *, int); static uint16_t iha_se2_rd(struct iha_softc *, int); #ifdef notused static void iha_se2_update_all(struct iha_softc *); static void iha_se2_wr(struct iha_softc *, int, uint16_t); #endif /* * iha_append_free_scb - append the supplied SCB to the tail of the * sc_freescb queue after clearing and resetting * everything possible. */ static void iha_append_free_scb(struct iha_softc *sc, struct iha_scb *scb) { int s; s = splbio(); if (scb == sc->sc_actscb) sc->sc_actscb = NULL; scb->status = STATUS_QUEUED; scb->ha_stat = HOST_OK; scb->ta_stat = SCSI_OK; scb->nextstat = 0; scb->scb_tagmsg = 0; scb->xs = NULL; scb->tcs = NULL; /* * scb_tagid, sg_addr, sglist * SCB_SensePtr are set at initialization * and never change */ TAILQ_INSERT_TAIL(&sc->sc_freescb, scb, chain); splx(s); } static void iha_append_done_scb(struct iha_softc *sc, struct iha_scb *scb, uint8_t hastat) { struct tcs *tcs; int s; s = splbio(); if (scb->xs != NULL) callout_stop(&scb->xs->xs_callout); if (scb == sc->sc_actscb) sc->sc_actscb = NULL; tcs = scb->tcs; if (scb->scb_tagmsg != 0) { if (tcs->tagcnt) tcs->tagcnt--; } else if (tcs->ntagscb == scb) tcs->ntagscb = NULL; scb->status = STATUS_QUEUED; scb->ha_stat = hastat; TAILQ_INSERT_TAIL(&sc->sc_donescb, scb, chain); splx(s); } static __inline struct iha_scb * iha_pop_done_scb(struct iha_softc *sc) { struct iha_scb *scb; int s; s = splbio(); scb = TAILQ_FIRST(&sc->sc_donescb); if (scb != NULL) { scb->status = STATUS_RENT; TAILQ_REMOVE(&sc->sc_donescb, scb, chain); } splx(s); return (scb); } /* * iha_find_pend_scb - scan the pending queue for a SCB that can be * processed immediately. Return NULL if none found * and a pointer to the SCB if one is found. If there * is an active SCB, return NULL! */ static struct iha_scb * iha_find_pend_scb(struct iha_softc *sc) { struct iha_scb *scb; struct tcs *tcs; int s; s = splbio(); if (sc->sc_actscb != NULL) scb = NULL; else TAILQ_FOREACH(scb, &sc->sc_pendscb, chain) { if ((scb->xs->xs_control & XS_CTL_RESET) != 0) /* ALWAYS willing to reset a device */ break; tcs = scb->tcs; if ((scb->scb_tagmsg) != 0) { /* * A Tagged I/O. OK to start If no * non-tagged I/O is active on the same * target */ if (tcs->ntagscb == NULL) break; } else if (scb->cmd[0] == SCSI_REQUEST_SENSE) { /* * OK to do a non-tagged request sense * even if a non-tagged I/O has been * started, 'cuz we don't allow any * disconnect during a request sense op */ break; } else if (tcs->tagcnt == 0) { /* * No tagged I/O active on this target, * ok to start a non-tagged one if one * is not already active */ if (tcs->ntagscb == NULL) break; } } splx(s); return (scb); } static __inline void iha_append_pend_scb(struct iha_softc *sc, struct iha_scb *scb) { /* ASSUMPTION: only called within a splbio()/splx() pair */ if (scb == sc->sc_actscb) sc->sc_actscb = NULL; scb->status = STATUS_QUEUED; TAILQ_INSERT_TAIL(&sc->sc_pendscb, scb, chain); } static __inline void iha_push_pend_scb(struct iha_softc *sc, struct iha_scb *scb) { int s; s = splbio(); if (scb == sc->sc_actscb) sc->sc_actscb = NULL; scb->status = STATUS_QUEUED; TAILQ_INSERT_HEAD(&sc->sc_pendscb, scb, chain); splx(s); } /* * iha_del_pend_scb - remove scb from sc_pendscb */ static __inline void iha_del_pend_scb(struct iha_softc *sc, struct iha_scb *scb) { int s; s = splbio(); TAILQ_REMOVE(&sc->sc_pendscb, scb, chain); splx(s); } static __inline void iha_mark_busy_scb(struct iha_scb *scb) { int s; s = splbio(); scb->status = STATUS_BUSY; if (scb->scb_tagmsg == 0) scb->tcs->ntagscb = scb; else scb->tcs->tagcnt++; splx(s); } /* * iha_set_ssig - read the current scsi signal mask, then write a new * one which turns off/on the specified signals. */ static __inline void iha_set_ssig(struct iha_softc *sc, uint8_t offsigs, uint8_t onsigs) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; uint8_t currsigs; currsigs = bus_space_read_1(iot, ioh, TUL_SSIGI); bus_space_write_1(iot, ioh, TUL_SSIGO, (currsigs & ~offsigs) | onsigs); } /* * iha_intr - the interrupt service routine for the iha driver */ int iha_intr(void *arg) { bus_space_tag_t iot; bus_space_handle_t ioh; struct iha_softc *sc; int s; sc = (struct iha_softc *)arg; iot = sc->sc_iot; ioh = sc->sc_ioh; if ((bus_space_read_1(iot, ioh, TUL_STAT0) & INTPD) == 0) return (0); s = splbio(); /* XXX - Or are interrupts off when ISR's are called? */ if (sc->sc_semaph != SEMAPH_IN_MAIN) { /* XXX - need these inside a splbio()/splx()? */ bus_space_write_1(iot, ioh, TUL_IMSK, MASK_ALL); sc->sc_semaph = SEMAPH_IN_MAIN; iha_main(sc); sc->sc_semaph = ~SEMAPH_IN_MAIN; bus_space_write_1(iot, ioh, TUL_IMSK, (MASK_ALL & ~MSCMP)); } splx(s); return (1); } void iha_attach(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb; struct iha_eeprom eeprom; struct eeprom_adapter *conf; int i, error, reg; iha_read_eeprom(sc, &eeprom); conf = &eeprom.adapter[0]; /* * fill in the rest of the iha_softc fields */ sc->sc_id = CFG_ID(conf->config1); sc->sc_semaph = ~SEMAPH_IN_MAIN; sc->sc_status0 = 0; sc->sc_actscb = NULL; TAILQ_INIT(&sc->sc_freescb); TAILQ_INIT(&sc->sc_pendscb); TAILQ_INIT(&sc->sc_donescb); error = iha_alloc_sglist(sc); if (error != 0) { printf(": cannot allocate sglist\n"); return; } sc->sc_scb = malloc(sizeof(struct iha_scb) * IHA_MAX_SCB, M_DEVBUF, M_NOWAIT|M_ZERO); if (sc->sc_scb == NULL) { printf(": cannot allocate SCB\n"); return; } for (i = 0, scb = sc->sc_scb; i < IHA_MAX_SCB; i++, scb++) { scb->scb_tagid = i; scb->sgoffset = IHA_SG_SIZE * i; scb->sglist = sc->sc_sglist + IHA_MAX_SG_ENTRIES * i; scb->sg_addr = sc->sc_dmamap->dm_segs[0].ds_addr + scb->sgoffset; error = bus_dmamap_create(sc->sc_dmat, MAXPHYS, IHA_MAX_SG_ENTRIES, MAXPHYS, 0, BUS_DMA_NOWAIT, &scb->dmap); if (error != 0) { printf(": couldn't create SCB DMA map, error = %d\n", error); return; } TAILQ_INSERT_TAIL(&sc->sc_freescb, scb, chain); } /* Mask all the interrupts */ bus_space_write_1(iot, ioh, TUL_IMSK, MASK_ALL); /* Stop any I/O and reset the scsi module */ iha_reset_dma(sc); bus_space_write_1(iot, ioh, TUL_SCTRL0, RSMOD); /* Program HBA's SCSI ID */ bus_space_write_1(iot, ioh, TUL_SID, sc->sc_id << 4); /* * Configure the channel as requested by the NVRAM settings read * by iha_read_eeprom() above. */ sc->sc_sconf1 = SCONFIG0DEFAULT; if ((conf->config1 & CFG_EN_PAR) != 0) sc->sc_sconf1 |= SPCHK; bus_space_write_1(iot, ioh, TUL_SCONFIG0, sc->sc_sconf1); /* set selection time out 250 ms */ bus_space_write_1(iot, ioh, TUL_STIMO, STIMO_250MS); /* Enable desired SCSI termination configuration read from eeprom */ reg = 0; if (conf->config1 & CFG_ACT_TERM1) reg |= ENTMW; if (conf->config1 & CFG_ACT_TERM2) reg |= ENTM; bus_space_write_1(iot, ioh, TUL_DCTRL0, reg); reg = bus_space_read_1(iot, ioh, TUL_GCTRL1) & ~ATDEN; if (conf->config1 & CFG_AUTO_TERM) reg |= ATDEN; bus_space_write_1(iot, ioh, TUL_GCTRL1, reg); for (i = 0; i < IHA_MAX_TARGETS / 2; i++) { sc->sc_tcs[i * 2 ].flags = EEP_LBYTE(conf->tflags[i]); sc->sc_tcs[i * 2 + 1].flags = EEP_HBYTE(conf->tflags[i]); iha_reset_tcs(&sc->sc_tcs[i * 2 ], sc->sc_sconf1); iha_reset_tcs(&sc->sc_tcs[i * 2 + 1], sc->sc_sconf1); } iha_reset_chip(sc); bus_space_write_1(iot, ioh, TUL_SIEN, ALL_INTERRUPTS); /* * fill in the adapter. */ sc->sc_adapter.adapt_dev = &sc->sc_dev; sc->sc_adapter.adapt_nchannels = 1; sc->sc_adapter.adapt_openings = IHA_MAX_SCB; sc->sc_adapter.adapt_max_periph = IHA_MAX_SCB; sc->sc_adapter.adapt_ioctl = NULL; sc->sc_adapter.adapt_minphys = minphys; sc->sc_adapter.adapt_request = iha_scsipi_request; /* * fill in the channel. */ sc->sc_channel.chan_adapter = &sc->sc_adapter; sc->sc_channel.chan_bustype = &scsi_bustype; sc->sc_channel.chan_channel = 0; sc->sc_channel.chan_ntargets = CFG_TARGET(conf->config2); sc->sc_channel.chan_nluns = 8; sc->sc_channel.chan_id = sc->sc_id; /* * Now try to attach all the sub devices. */ config_found(&sc->sc_dev, &sc->sc_channel, scsiprint); } /* * iha_alloc_sglist - allocate and map sglist for SCB's */ static int iha_alloc_sglist(struct iha_softc *sc) { bus_dma_segment_t seg; int error, rseg; /* * Allocate DMA-safe memory for the SCB's sglist */ if ((error = bus_dmamem_alloc(sc->sc_dmat, IHA_SG_SIZE * IHA_MAX_SCB, PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) { printf(": unable to allocate sglist, error = %d\n", error); return (error); } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, IHA_SG_SIZE * IHA_MAX_SCB, (caddr_t *)&sc->sc_sglist, BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) { printf(": unable to map sglist, error = %d\n", error); return (error); } /* * Create and load the DMA map used for the SCBs */ if ((error = bus_dmamap_create(sc->sc_dmat, IHA_SG_SIZE * IHA_MAX_SCB, 1, IHA_SG_SIZE * IHA_MAX_SCB, 0, BUS_DMA_NOWAIT, &sc->sc_dmamap)) != 0) { printf(": unable to create control DMA map, error = %d\n", error); return (error); } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap, sc->sc_sglist, IHA_SG_SIZE * IHA_MAX_SCB, NULL, BUS_DMA_NOWAIT)) != 0) { printf(": unable to load control DMA map, error = %d\n", error); return (error); } memset(sc->sc_sglist, 0, IHA_SG_SIZE * IHA_MAX_SCB); return (0); } void iha_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req, void *arg) { struct scsipi_xfer *xs; struct scsipi_periph *periph; struct iha_scb *scb; struct iha_softc *sc; int error, s; sc = (struct iha_softc *)chan->chan_adapter->adapt_dev; switch (req) { case ADAPTER_REQ_RUN_XFER: xs = arg; periph = xs->xs_periph; /* XXX This size isn't actually a hardware restriction. */ if (xs->cmdlen > sizeof(scb->cmd) || periph->periph_target >= IHA_MAX_TARGETS) { xs->error = XS_DRIVER_STUFFUP; scsipi_done(xs); return; } s = splbio(); scb = TAILQ_FIRST(&sc->sc_freescb); if (scb != NULL) { scb->status = STATUS_RENT; TAILQ_REMOVE(&sc->sc_freescb, scb, chain); } #ifdef DIAGNOSTIC else { scsipi_printaddr(periph); printf("unable to allocate scb\n"); panic("iha_scsipi_request"); } #endif splx(s); scb->target = periph->periph_target; scb->lun = periph->periph_lun; scb->tcs = &sc->sc_tcs[scb->target]; scb->scb_id = MSG_IDENTIFY(periph->periph_lun, (xs->xs_control & XS_CTL_REQSENSE) == 0); scb->xs = xs; scb->cmdlen = xs->cmdlen; memcpy(&scb->cmd, xs->cmd, xs->cmdlen); scb->buflen = xs->datalen; scb->flags = 0; if (xs->xs_control & XS_CTL_DATA_OUT) scb->flags |= FLAG_DATAOUT; if (xs->xs_control & XS_CTL_DATA_IN) scb->flags |= FLAG_DATAIN; if (scb->flags & (FLAG_DATAIN | FLAG_DATAOUT)) { error = bus_dmamap_load(sc->sc_dmat, scb->dmap, xs->data, scb->buflen, NULL, ((xs->xs_control & XS_CTL_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK) | BUS_DMA_STREAMING | ((scb->flags & FLAG_DATAIN) ? BUS_DMA_READ : BUS_DMA_WRITE)); if (error) { printf("%s: error %d loading DMA map\n", sc->sc_dev.dv_xname, error); iha_append_free_scb(sc, scb); xs->error = XS_DRIVER_STUFFUP; scsipi_done(xs); return; } bus_dmamap_sync(sc->sc_dmat, scb->dmap, 0, scb->dmap->dm_mapsize, (scb->flags & FLAG_DATAIN) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); } iha_exec_scb(sc, scb); return; case ADAPTER_REQ_GROW_RESOURCES: return; /* XXX */ case ADAPTER_REQ_SET_XFER_MODE: { struct tcs *tcs; struct scsipi_xfer_mode *xm = arg; tcs = &sc->sc_tcs[xm->xm_target]; if ((xm->xm_mode & PERIPH_CAP_WIDE16) != 0 && (tcs->flags & FLAG_NO_WIDE) == 0) tcs->flags &= ~(FLAG_WIDE_DONE|FLAG_SYNC_DONE); if ((xm->xm_mode & PERIPH_CAP_SYNC) != 0 && (tcs->flags & FLAG_NO_SYNC) == 0) tcs->flags &= ~FLAG_SYNC_DONE; /* * If we're not going to negotiate, send the * notification now, since it won't happen later. */ if ((tcs->flags & (FLAG_WIDE_DONE|FLAG_SYNC_DONE)) == (FLAG_WIDE_DONE|FLAG_SYNC_DONE)) iha_update_xfer_mode(sc, xm->xm_target); return; } } } void iha_update_xfer_mode(struct iha_softc *sc, int target) { struct tcs *tcs = &sc->sc_tcs[target]; struct scsipi_xfer_mode xm; xm.xm_target = target; xm.xm_mode = 0; xm.xm_period = 0; xm.xm_offset = 0; if (tcs->syncm & PERIOD_WIDE_SCSI) xm.xm_mode |= PERIPH_CAP_WIDE16; if (tcs->period) { xm.xm_mode |= PERIPH_CAP_SYNC; xm.xm_period = tcs->period; xm.xm_offset = tcs->offset; } scsipi_async_event(&sc->sc_channel, ASYNC_EVENT_XFER_MODE, &xm); } static void iha_reset_scsi_bus(struct iha_softc *sc) { struct iha_scb *scb; struct tcs *tcs; int i, s; s = splbio(); iha_reset_dma(sc); for (i = 0, scb = sc->sc_scb; i < IHA_MAX_SCB; i++, scb++) switch (scb->status) { case STATUS_BUSY: iha_append_done_scb(sc, scb, HOST_SCSI_RST); break; case STATUS_SELECT: iha_push_pend_scb(sc, scb); break; default: break; } for (i = 0, tcs = sc->sc_tcs; i < IHA_MAX_TARGETS; i++, tcs++) iha_reset_tcs(tcs, sc->sc_sconf1); splx(s); } void iha_reset_chip(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; /* reset tulip chip */ bus_space_write_1(iot, ioh, TUL_SCTRL0, RSCSI); do { sc->sc_sistat = bus_space_read_1(iot, ioh, TUL_SISTAT); } while ((sc->sc_sistat & SRSTD) == 0); iha_set_ssig(sc, 0, 0); bus_space_read_1(iot, ioh, TUL_SISTAT); /* Clear any active interrupt*/ } /* * iha_reset_dma - abort any active DMA xfer, reset tulip FIFO. */ static void iha_reset_dma(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; if ((bus_space_read_1(iot, ioh, TUL_ISTUS1) & XPEND) != 0) { /* if DMA xfer is pending, abort DMA xfer */ bus_space_write_1(iot, ioh, TUL_DCMD, ABTXFR); /* wait Abort DMA xfer done */ while ((bus_space_read_1(iot, ioh, TUL_ISTUS0) & DABT) == 0) ; } bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); } /* * iha_reset_tcs - reset the target control structure pointed * to by tcs to default values. tcs flags * only has the negotiation done bits reset as * the other bits are fixed at initialization. */ static void iha_reset_tcs(struct tcs *tcs, uint8_t config0) { tcs->flags &= ~(FLAG_SYNC_DONE | FLAG_WIDE_DONE); tcs->period = 0; tcs->offset = 0; tcs->tagcnt = 0; tcs->ntagscb = NULL; tcs->syncm = 0; tcs->sconfig0 = config0; } /* * iha_main - process the active SCB, taking one off pending and making it * active if necessary, and any done SCB's created as * a result until there are no interrupts pending and no pending * SCB's that can be started. */ static void iha_main(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh =sc->sc_ioh; struct iha_scb *scb; for (;;) { iha_scsi(sc); while ((scb = iha_pop_done_scb(sc)) != NULL) iha_done_scb(sc, scb); /* * If there are no interrupts pending, or we can't start * a pending sc, break out of the for(;;). Otherwise * continue the good work with another call to * iha_scsi(). */ if (((bus_space_read_1(iot, ioh, TUL_STAT0) & INTPD) == 0) && (iha_find_pend_scb(sc) == NULL)) break; } } /* * iha_scsi - service any outstanding interrupts. If there are none, try to * start another SCB currently in the pending queue. */ static void iha_scsi(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb; struct tcs *tcs; uint8_t stat; /* service pending interrupts asap */ stat = bus_space_read_1(iot, ioh, TUL_STAT0); if ((stat & INTPD) != 0) { sc->sc_status0 = stat; sc->sc_status1 = bus_space_read_1(iot, ioh, TUL_STAT1); sc->sc_sistat = bus_space_read_1(iot, ioh, TUL_SISTAT); sc->sc_phase = sc->sc_status0 & PH_MASK; if ((sc->sc_sistat & SRSTD) != 0) { iha_reset_scsi_bus(sc); return; } if ((sc->sc_sistat & RSELED) != 0) { iha_resel(sc); return; } if ((sc->sc_sistat & (STIMEO | DISCD)) != 0) { iha_busfree(sc); return; } if ((sc->sc_sistat & (SCMDN | SBSRV)) != 0) { iha_next_state(sc); return; } if ((sc->sc_sistat & SELED) != 0) iha_set_ssig(sc, 0, 0); } /* * There were no interrupts pending which required action elsewhere, so * see if it is possible to start the selection phase on a pending SCB */ if ((scb = iha_find_pend_scb(sc)) == NULL) return; tcs = scb->tcs; /* program HBA's SCSI ID & target SCSI ID */ bus_space_write_1(iot, ioh, TUL_SID, (sc->sc_id << 4) | scb->target); if ((scb->xs->xs_control & XS_CTL_RESET) == 0) { bus_space_write_1(iot, ioh, TUL_SYNCM, tcs->syncm); if ((tcs->flags & FLAG_NO_NEG_SYNC) == 0 || (tcs->flags & FLAG_NO_NEG_WIDE) == 0) iha_select(sc, scb, SELATNSTOP); else if (scb->scb_tagmsg != 0) iha_select(sc, scb, SEL_ATN3); else iha_select(sc, scb, SEL_ATN); } else { iha_select(sc, scb, SELATNSTOP); scb->nextstat = 8; } if ((scb->xs->xs_control & XS_CTL_POLL) != 0) { int timeout; for (timeout = scb->xs->timeout; timeout > 0; timeout--) { if (iha_wait(sc, NO_OP) == -1) break; if (iha_next_state(sc) == -1) break; delay(1000); /* Only happens in boot, so it's ok */ } /* * Since done queue processing not done until AFTER this * function returns, scb is on the done queue, not * the free queue at this point and still has valid data * * Conversely, xs->error has not been set yet */ if (timeout == 0) iha_timeout(scb); } } static void iha_select(struct iha_softc *sc, struct iha_scb *scb, uint8_t select_type) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; switch (select_type) { case SEL_ATN: bus_space_write_1(iot, ioh, TUL_SFIFO, scb->scb_id); bus_space_write_multi_1(iot, ioh, TUL_SFIFO, scb->cmd, scb->cmdlen); scb->nextstat = 2; break; case SELATNSTOP: scb->nextstat = 1; break; case SEL_ATN3: bus_space_write_1(iot, ioh, TUL_SFIFO, scb->scb_id); bus_space_write_1(iot, ioh, TUL_SFIFO, scb->scb_tagmsg); bus_space_write_1(iot, ioh, TUL_SFIFO, scb->scb_tagid); bus_space_write_multi_1(iot, ioh, TUL_SFIFO, scb->cmd, scb->cmdlen); scb->nextstat = 2; break; default: printf("[debug] iha_select() - unknown select type = 0x%02x\n", select_type); return; } iha_del_pend_scb(sc, scb); scb->status = STATUS_SELECT; sc->sc_actscb = scb; bus_space_write_1(iot, ioh, TUL_SCMD, select_type); } /* * iha_wait - wait for an interrupt to service or a SCSI bus phase change * after writing the supplied command to the tulip chip. If * the command is NO_OP, skip the command writing. */ static int iha_wait(struct iha_softc *sc, uint8_t cmd) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; if (cmd != NO_OP) bus_space_write_1(iot, ioh, TUL_SCMD, cmd); /* * Have to do this here, in addition to in iha_isr, because * interrupts might be turned off when we get here. */ do { sc->sc_status0 = bus_space_read_1(iot, ioh, TUL_STAT0); } while ((sc->sc_status0 & INTPD) == 0); sc->sc_status1 = bus_space_read_1(iot, ioh, TUL_STAT1); sc->sc_sistat = bus_space_read_1(iot, ioh, TUL_SISTAT); sc->sc_phase = sc->sc_status0 & PH_MASK; if ((sc->sc_sistat & SRSTD) != 0) { /* SCSI bus reset interrupt */ iha_reset_scsi_bus(sc); return (-1); } if ((sc->sc_sistat & RSELED) != 0) /* Reselection interrupt */ return (iha_resel(sc)); if ((sc->sc_sistat & STIMEO) != 0) { /* selected/reselected timeout interrupt */ iha_busfree(sc); return (-1); } if ((sc->sc_sistat & DISCD) != 0) { /* BUS disconnection interrupt */ if ((sc->sc_flags & FLAG_EXPECT_DONE_DISC) != 0) { bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); bus_space_write_1(iot, ioh, TUL_SCONFIG0, SCONFIG0DEFAULT); bus_space_write_1(iot, ioh, TUL_SCTRL1, EHRSL); iha_append_done_scb(sc, sc->sc_actscb, HOST_OK); sc->sc_flags &= ~FLAG_EXPECT_DONE_DISC; } else if ((sc->sc_flags & FLAG_EXPECT_DISC) != 0) { bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); bus_space_write_1(iot, ioh, TUL_SCONFIG0, SCONFIG0DEFAULT); bus_space_write_1(iot, ioh, TUL_SCTRL1, EHRSL); sc->sc_actscb = NULL; sc->sc_flags &= ~FLAG_EXPECT_DISC; } else iha_busfree(sc); return (-1); } return (sc->sc_phase); } static void iha_exec_scb(struct iha_softc *sc, struct iha_scb *scb) { bus_space_tag_t iot; bus_space_handle_t ioh; bus_dmamap_t dm; struct scsipi_xfer *xs = scb->xs; int nseg, s; dm = scb->dmap; nseg = dm->dm_nsegs; if (nseg > 1) { struct iha_sg_element *sg = scb->sglist; int i; for (i = 0; i < nseg; i++) { sg[i].sg_len = htole32(dm->dm_segs[i].ds_len); sg[i].sg_addr = htole32(dm->dm_segs[i].ds_addr); } bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, scb->sgoffset, IHA_SG_SIZE, BUS_DMASYNC_PREWRITE); scb->flags |= FLAG_SG; scb->sg_size = scb->sg_max = nseg; scb->sg_index = 0; scb->bufaddr = scb->sg_addr; } else scb->bufaddr = dm->dm_segs[0].ds_addr; if ((xs->xs_control & XS_CTL_POLL) == 0) { int timeout = mstohz(xs->timeout); if (timeout == 0) timeout = 1; callout_reset(&xs->xs_callout, timeout, iha_timeout, scb); } s = splbio(); if (((scb->xs->xs_control & XS_RESET) != 0) || (scb->cmd[0] == SCSI_REQUEST_SENSE)) iha_push_pend_scb(sc, scb); /* Insert SCB at head of Pend */ else iha_append_pend_scb(sc, scb); /* Append SCB to tail of Pend */ /* * Run through iha_main() to ensure something is active, if * only this new SCB. */ if (sc->sc_semaph != SEMAPH_IN_MAIN) { iot = sc->sc_iot; ioh = sc->sc_ioh; bus_space_write_1(iot, ioh, TUL_IMSK, MASK_ALL); sc->sc_semaph = SEMAPH_IN_MAIN; splx(s); iha_main(sc); s = splbio(); sc->sc_semaph = ~SEMAPH_IN_MAIN; bus_space_write_1(iot, ioh, TUL_IMSK, (MASK_ALL & ~MSCMP)); } splx(s); } /* * iha_done_scb - We have a scb which has been processed by the * adaptor, now we look to see how the operation went. */ static void iha_done_scb(struct iha_softc *sc, struct iha_scb *scb) { struct scsipi_xfer *xs = scb->xs; if (xs != NULL) { /* Cancel the timeout. */ callout_stop(&xs->xs_callout); if (scb->flags & (FLAG_DATAIN | FLAG_DATAOUT)) { bus_dmamap_sync(sc->sc_dmat, scb->dmap, 0, scb->dmap->dm_mapsize, (scb->flags & FLAG_DATAIN) ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, scb->dmap); } xs->status = scb->ta_stat; switch (scb->ha_stat) { case HOST_OK: switch (scb->ta_stat) { case SCSI_OK: case SCSI_CONDITION_MET: case SCSI_INTERM: case SCSI_INTERM_COND_MET: xs->resid = scb->buflen; xs->error = XS_NOERROR; if ((scb->flags & FLAG_RSENS) != 0) xs->error = XS_SENSE; break; case SCSI_RESV_CONFLICT: case SCSI_BUSY: case SCSI_QUEUE_FULL: xs->error = XS_BUSY; break; case SCSI_TERMINATED: case SCSI_ACA_ACTIVE: case SCSI_CHECK: scb->tcs->flags &= ~(FLAG_SYNC_DONE | FLAG_WIDE_DONE); if ((scb->flags & FLAG_RSENS) != 0 || iha_push_sense_request(sc, scb) != 0) { scb->flags &= ~FLAG_RSENS; printf("%s: request sense failed\n", sc->sc_dev.dv_xname); xs->error = XS_DRIVER_STUFFUP; break; } xs->error = XS_SENSE; return; default: xs->error = XS_DRIVER_STUFFUP; break; } break; case HOST_SEL_TOUT: xs->error = XS_SELTIMEOUT; break; case HOST_SCSI_RST: case HOST_DEV_RST: xs->error = XS_RESET; break; case HOST_SPERR: printf("%s: SCSI Parity error detected\n", sc->sc_dev.dv_xname); xs->error = XS_DRIVER_STUFFUP; break; case HOST_TIMED_OUT: xs->error = XS_TIMEOUT; break; case HOST_DO_DU: case HOST_BAD_PHAS: default: xs->error = XS_DRIVER_STUFFUP; break; } scsipi_done(xs); } iha_append_free_scb(sc, scb); } /* * iha_push_sense_request - obtain auto sense data by pushing the * SCB needing it back onto the pending * queue with a REQUEST_SENSE CDB. */ static int iha_push_sense_request(struct iha_softc *sc, struct iha_scb *scb) { struct scsipi_xfer *xs = scb->xs; struct scsipi_periph *periph = xs->xs_periph; struct scsi_request_sense *ss = (struct scsi_request_sense *)scb->cmd; int lun = periph->periph_lun; int err; memset(ss, 0, sizeof(*ss)); ss->opcode = SCSI_REQUEST_SENSE; ss->byte2 = lun << SCSI_CMD_LUN_SHIFT; ss->length = sizeof(struct scsi_sense_data); scb->flags = FLAG_RSENS | FLAG_DATAIN; scb->scb_id &= ~MSG_IDENTIFY_DISCFLAG; scb->scb_tagmsg = 0; scb->ta_stat = SCSI_OK; scb->cmdlen = sizeof(struct scsi_request_sense); scb->buflen = ss->length; err = bus_dmamap_load(sc->sc_dmat, scb->dmap, &xs->sense.scsi_sense, scb->buflen, NULL, BUS_DMA_READ|BUS_DMA_NOWAIT); if (err != 0) { printf("iha_push_sense_request: cannot bus_dmamap_load()\n"); xs->error = XS_DRIVER_STUFFUP; return 1; } bus_dmamap_sync(sc->sc_dmat, scb->dmap, 0, scb->buflen, BUS_DMASYNC_PREREAD); /* XXX What about queued command? */ iha_exec_scb(sc, scb); return 0; } static void iha_timeout(void *arg) { struct iha_scb *scb = (struct iha_scb *)arg; struct scsipi_xfer *xs = scb->xs; struct scsipi_periph *periph = xs->xs_periph; struct iha_softc *sc; sc = (void *)periph->periph_channel->chan_adapter->adapt_dev; if (xs == NULL) printf("[debug] iha_timeout called with xs == NULL\n"); else { scsipi_printaddr(periph); printf("SCSI OpCode 0x%02x timed out\n", xs->cmd->opcode); iha_abort_xs(sc, xs, HOST_TIMED_OUT); } } /* * iha_abort_xs - find the SCB associated with the supplied xs and * stop all processing on it, moving it to the done * queue with the supplied host status value. */ static void iha_abort_xs(struct iha_softc *sc, struct scsipi_xfer *xs, uint8_t hastat) { struct iha_scb *scb; int i, s; s = splbio(); /* Check the pending queue for the SCB pointing to xs */ TAILQ_FOREACH(scb, &sc->sc_pendscb, chain) if (scb->xs == xs) { iha_del_pend_scb(sc, scb); iha_append_done_scb(sc, scb, hastat); splx(s); return; } /* * If that didn't work, check all BUSY/SELECTING SCB's for one * pointing to xs */ for (i = 0, scb = sc->sc_scb; i < IHA_MAX_SCB; i++, scb++) switch (scb->status) { case STATUS_BUSY: case STATUS_SELECT: if (scb->xs == xs) { iha_append_done_scb(sc, scb, hastat); splx(s); return; } break; default: break; } splx(s); } /* * iha_data_over_run - return HOST_OK for all SCSI opcodes where BufLen * is an 'Allocation Length'. All other SCSI opcodes * get HOST_DO_DU as they SHOULD have xferred all the * data requested. * * The list of opcodes using 'Allocation Length' was * found by scanning all the SCSI-3 T10 drafts. See * www.t10.org for the curious with a .pdf reader. */ static uint8_t iha_data_over_run(struct iha_scb *scb) { switch (scb->cmd[0]) { case 0x03: /* Request Sense SPC-2 */ case 0x12: /* Inquiry SPC-2 */ case 0x1a: /* Mode Sense (6 byte version) SPC-2 */ case 0x1c: /* Receive Diagnostic Results SPC-2 */ case 0x23: /* Read Format Capacities MMC-2 */ case 0x29: /* Read Generation SBC */ case 0x34: /* Read Position SSC-2 */ case 0x37: /* Read Defect Data SBC */ case 0x3c: /* Read Buffer SPC-2 */ case 0x42: /* Read Sub Channel MMC-2 */ case 0x43: /* Read TOC/PMA/ATIP MMC */ /* XXX - 2 with same opcode of 0x44? */ case 0x44: /* Read Header/Read Density Suprt MMC/SSC*/ case 0x46: /* Get Configuration MMC-2 */ case 0x4a: /* Get Event/Status Notification MMC-2 */ case 0x4d: /* Log Sense SPC-2 */ case 0x51: /* Read Disc Information MMC */ case 0x52: /* Read Track Information MMC */ case 0x59: /* Read Master CUE MMC */ case 0x5a: /* Mode Sense (10 byte version) SPC-2 */ case 0x5c: /* Read Buffer Capacity MMC */ case 0x5e: /* Persistent Reserve In SPC-2 */ case 0x84: /* Receive Copy Results SPC-2 */ case 0xa0: /* Report LUNs SPC-2 */ case 0xa3: /* Various Report requests SBC-2/SCC-2*/ case 0xa4: /* Report Key MMC-2 */ case 0xad: /* Read DVD Structure MMC-2 */ case 0xb4: /* Read Element Status (Attached) SMC */ case 0xb5: /* Request Volume Element Address SMC */ case 0xb7: /* Read Defect Data (12 byte ver.) SBC */ case 0xb8: /* Read Element Status (Independ.) SMC */ case 0xba: /* Report Redundancy SCC-2 */ case 0xbd: /* Mechanism Status MMC */ case 0xbe: /* Report Basic Redundancy SCC-2 */ return (HOST_OK); default: return (HOST_DO_DU); } } /* * iha_next_state - process the current SCB as requested in its * nextstat member. */ static int iha_next_state(struct iha_softc *sc) { if (sc->sc_actscb == NULL) return (-1); switch (sc->sc_actscb->nextstat) { case 1: if (iha_state_1(sc) == 3) goto state_3; break; case 2: switch (iha_state_2(sc)) { case 3: goto state_3; case 4: goto state_4; default: break; } break; case 3: state_3: if (iha_state_3(sc) == 4) goto state_4; break; case 4: state_4: switch (iha_state_4(sc)) { case 0: return (0); case 6: goto state_6; default: break; } break; case 5: switch (iha_state_5(sc)) { case 4: goto state_4; case 6: goto state_6; default: break; } break; case 6: state_6: iha_state_6(sc); break; case 8: iha_state_8(sc); break; default: #ifdef IHA_DEBUG_STATE printf("[debug] -unknown state: %i-\n", sc->sc_actscb->nextstat); #endif iha_bad_seq(sc); break; } return (-1); } /* * iha_state_1 - selection is complete after a SELATNSTOP. If the target * has put the bus into MSG_OUT phase start wide/sync * negotiation. Otherwise clear the FIFO and go to state 3, * which will send the SCSI CDB to the target. */ static int iha_state_1(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb = sc->sc_actscb; struct tcs *tcs; int flags; iha_mark_busy_scb(scb); tcs = scb->tcs; bus_space_write_1(iot, ioh, TUL_SCONFIG0, tcs->sconfig0); /* * If we are in PHASE_MSG_OUT, send * a) IDENT message (with tags if appropriate) * b) WDTR if the target is configured to negotiate wide xfers * ** OR ** * c) SDTR if the target is configured to negotiate sync xfers * but not wide ones * * If we are NOT, then the target is not asking for anything but * the data/command, so go straight to state 3. */ if (sc->sc_phase == PHASE_MSG_OUT) { bus_space_write_1(iot, ioh, TUL_SCTRL1, (ESBUSIN | EHRSL)); bus_space_write_1(iot, ioh, TUL_SFIFO, scb->scb_id); if (scb->scb_tagmsg != 0) { bus_space_write_1(iot, ioh, TUL_SFIFO, scb->scb_tagmsg); bus_space_write_1(iot, ioh, TUL_SFIFO, scb->scb_tagid); } flags = tcs->flags; if ((flags & FLAG_NO_NEG_WIDE) == 0) { if (iha_msgout_wdtr(sc) == -1) return (-1); } else if ((flags & FLAG_NO_NEG_SYNC) == 0) { if (iha_msgout_sdtr(sc) == -1) return (-1); } } else { bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); iha_set_ssig(sc, REQ | BSY | SEL | ATN, 0); } return (3); } /* * iha_state_2 - selection is complete after a SEL_ATN or SEL_ATN3. If the SCSI * CDB has already been send, go to state 4 to start the data * xfer. Otherwise reset the FIFO and go to state 3, sending * the SCSI CDB. */ static int iha_state_2(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb = sc->sc_actscb; iha_mark_busy_scb(scb); bus_space_write_1(iot, ioh, TUL_SCONFIG0, scb->tcs->sconfig0); if ((sc->sc_status1 & CPDNE) != 0) return (4); bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); iha_set_ssig(sc, REQ | BSY | SEL | ATN, 0); return (3); } /* * iha_state_3 - send the SCSI CDB to the target, processing any status * or other messages received until that is done or * abandoned. */ static int iha_state_3(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb = sc->sc_actscb; int flags; for (;;) { switch (sc->sc_phase) { case PHASE_CMD_OUT: bus_space_write_multi_1(iot, ioh, TUL_SFIFO, scb->cmd, scb->cmdlen); if (iha_wait(sc, XF_FIFO_OUT) == -1) return (-1); else if (sc->sc_phase == PHASE_CMD_OUT) { iha_bad_seq(sc); return (-1); } else return (4); case PHASE_MSG_IN: scb->nextstat = 3; if (iha_msgin(sc) == -1) return (-1); break; case PHASE_STATUS_IN: if (iha_status_msg(sc) == -1) return (-1); break; case PHASE_MSG_OUT: flags = scb->tcs->flags; if ((flags & FLAG_NO_NEG_SYNC) != 0) { if (iha_msgout(sc, MSG_NOOP) == -1) return (-1); } else if (iha_msgout_sdtr(sc) == -1) return (-1); break; default: printf("[debug] -s3- bad phase = %d\n", sc->sc_phase); iha_bad_seq(sc); return (-1); } } } /* * iha_state_4 - start a data xfer. Handle any bus state * transitions until PHASE_DATA_IN/_OUT * or the attempt is abandoned. If there is * no data to xfer, go to state 6 and finish * processing the current SCB. */ static int iha_state_4(struct iha_softc *sc) { struct iha_scb *scb = sc->sc_actscb; if ((scb->flags & (FLAG_DATAIN | FLAG_DATAOUT)) == (FLAG_DATAIN | FLAG_DATAOUT)) return (6); /* Both dir flags set => NO xfer was requested */ for (;;) { if (scb->buflen == 0) return (6); switch (sc->sc_phase) { case PHASE_STATUS_IN: if ((scb->flags & (FLAG_DATAIN | FLAG_DATAOUT)) != 0) scb->ha_stat = iha_data_over_run(scb); if ((iha_status_msg(sc)) == -1) return (-1); break; case PHASE_MSG_IN: scb->nextstat = 4; if (iha_msgin(sc) == -1) return (-1); break; case PHASE_MSG_OUT: if ((sc->sc_status0 & SPERR) != 0) { scb->buflen = 0; scb->ha_stat = HOST_SPERR; if (iha_msgout(sc, MSG_INITIATOR_DET_ERR) == -1) return (-1); else return (6); } else { if (iha_msgout(sc, MSG_NOOP) == -1) return (-1); } break; case PHASE_DATA_IN: return (iha_xfer_data(sc, scb, FLAG_DATAIN)); case PHASE_DATA_OUT: return (iha_xfer_data(sc, scb, FLAG_DATAOUT)); default: iha_bad_seq(sc); return (-1); } } } /* * iha_state_5 - handle the partial or final completion of the current * data xfer. If DMA is still active stop it. If there is * more data to xfer, go to state 4 and start the xfer. * If not go to state 6 and finish the SCB. */ static int iha_state_5(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb = sc->sc_actscb; struct iha_sg_element *sg; uint32_t cnt; uint8_t period, stat; long xcnt; /* cannot use unsigned!! see code: if (xcnt < 0) */ int i; cnt = bus_space_read_4(iot, ioh, TUL_STCNT0) & TCNT; /* * Stop any pending DMA activity and check for parity error. */ if ((bus_space_read_1(iot, ioh, TUL_DCMD) & XDIR) != 0) { /* Input Operation */ if ((sc->sc_status0 & SPERR) != 0) scb->ha_stat = HOST_SPERR; if ((bus_space_read_1(iot, ioh, TUL_ISTUS1) & XPEND) != 0) { bus_space_write_1(iot, ioh, TUL_DCTRL0, bus_space_read_1(iot, ioh, TUL_DCTRL0) | SXSTP); while (bus_space_read_1(iot, ioh, TUL_ISTUS1) & XPEND) ; } } else { /* Output Operation */ if ((sc->sc_status1 & SXCMP) == 0) { period = scb->tcs->syncm; if ((period & PERIOD_WIDE_SCSI) != 0) cnt += (bus_space_read_1(iot, ioh, TUL_SFIFOCNT) & FIFOC) * 2; else cnt += bus_space_read_1(iot, ioh, TUL_SFIFOCNT) & FIFOC; } if ((bus_space_read_1(iot, ioh, TUL_ISTUS1) & XPEND) != 0) { bus_space_write_1(iot, ioh, TUL_DCMD, ABTXFR); do stat = bus_space_read_1(iot, ioh, TUL_ISTUS0); while ((stat & DABT) == 0); } if ((cnt == 1) && (sc->sc_phase == PHASE_DATA_OUT)) { if (iha_wait(sc, XF_FIFO_OUT) == -1) return (-1); cnt = 0; } else if ((sc->sc_status1 & SXCMP) == 0) bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); } if (cnt == 0) { scb->buflen = 0; return (6); } /* Update active data pointer and restart the I/O at the new point */ xcnt = scb->buflen - cnt; /* xcnt == bytes xferred */ scb->buflen = cnt; /* cnt == bytes left */ if ((scb->flags & FLAG_SG) != 0) { sg = &scb->sglist[scb->sg_index]; for (i = scb->sg_index; i < scb->sg_max; sg++, i++) { xcnt -= le32toh(sg->sg_len); if (xcnt < 0) { xcnt += le32toh(sg->sg_len); sg->sg_addr = htole32(le32toh(sg->sg_addr) + xcnt); sg->sg_len = htole32(le32toh(sg->sg_len) - xcnt); bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, scb->sgoffset, IHA_SG_SIZE, BUS_DMASYNC_PREWRITE); scb->bufaddr += (i - scb->sg_index) * sizeof(struct iha_sg_element); scb->sg_size = scb->sg_max - i; scb->sg_index = i; return (4); } } return (6); } else scb->bufaddr += xcnt; return (4); } /* * iha_state_6 - finish off the active scb (may require several * iterations if PHASE_MSG_IN) and return -1 to indicate * the bus is free. */ static int iha_state_6(struct iha_softc *sc) { for (;;) { switch (sc->sc_phase) { case PHASE_STATUS_IN: if (iha_status_msg(sc) == -1) return (-1); break; case PHASE_MSG_IN: sc->sc_actscb->nextstat = 6; if ((iha_msgin(sc)) == -1) return (-1); break; case PHASE_MSG_OUT: if ((iha_msgout(sc, MSG_NOOP)) == -1) return (-1); break; case PHASE_DATA_IN: if (iha_xpad_in(sc) == -1) return (-1); break; case PHASE_DATA_OUT: if (iha_xpad_out(sc) == -1) return (-1); break; default: iha_bad_seq(sc); return (-1); } } } /* * iha_state_8 - reset the active device and all busy SCBs using it */ static int iha_state_8(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb; int i; uint8_t tar; if (sc->sc_phase == PHASE_MSG_OUT) { bus_space_write_1(iot, ioh, TUL_SFIFO, MSG_BUS_DEV_RESET); scb = sc->sc_actscb; /* This SCB finished correctly -- resetting the device */ iha_append_done_scb(sc, scb, HOST_OK); iha_reset_tcs(scb->tcs, sc->sc_sconf1); tar = scb->target; for (i = 0, scb = sc->sc_scb; i < IHA_MAX_SCB; i++, scb++) if (scb->target == tar) switch (scb->status) { case STATUS_BUSY: iha_append_done_scb(sc, scb, HOST_DEV_RST); break; case STATUS_SELECT: iha_push_pend_scb(sc, scb); break; default: break; } sc->sc_flags |= FLAG_EXPECT_DISC; if (iha_wait(sc, XF_FIFO_OUT) == -1) return (-1); } iha_bad_seq(sc); return (-1); } /* * iha_xfer_data - initiate the DMA xfer of the data */ static int iha_xfer_data(struct iha_softc *sc, struct iha_scb *scb, int direction) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; uint32_t xferlen; uint8_t xfercmd; if ((scb->flags & (FLAG_DATAIN | FLAG_DATAOUT)) != direction) return (6); /* wrong direction, abandon I/O */ bus_space_write_4(iot, ioh, TUL_STCNT0, scb->buflen); xfercmd = STRXFR; if (direction == FLAG_DATAIN) xfercmd |= XDIR; if (scb->flags & FLAG_SG) { xferlen = scb->sg_size * sizeof(struct iha_sg_element); xfercmd |= SGXFR; } else xferlen = scb->buflen; bus_space_write_4(iot, ioh, TUL_DXC, xferlen); bus_space_write_4(iot, ioh, TUL_DXPA, scb->bufaddr); bus_space_write_1(iot, ioh, TUL_DCMD, xfercmd); bus_space_write_1(iot, ioh, TUL_SCMD, (direction == FLAG_DATAIN) ? XF_DMA_IN : XF_DMA_OUT); scb->nextstat = 5; return (0); } static int iha_xpad_in(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb = sc->sc_actscb; if ((scb->flags & (FLAG_DATAIN | FLAG_DATAOUT)) != 0) scb->ha_stat = HOST_DO_DU; for (;;) { if ((scb->tcs->syncm & PERIOD_WIDE_SCSI) != 0) bus_space_write_4(iot, ioh, TUL_STCNT0, 2); else bus_space_write_4(iot, ioh, TUL_STCNT0, 1); switch (iha_wait(sc, XF_FIFO_IN)) { case -1: return (-1); case PHASE_DATA_IN: bus_space_read_1(iot, ioh, TUL_SFIFO); break; default: bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); return (6); } } } static int iha_xpad_out(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb = sc->sc_actscb; if ((scb->flags & (FLAG_DATAIN | FLAG_DATAOUT)) != 0) scb->ha_stat = HOST_DO_DU; for (;;) { if ((scb->tcs->syncm & PERIOD_WIDE_SCSI) != 0) bus_space_write_4(iot, ioh, TUL_STCNT0, 2); else bus_space_write_4(iot, ioh, TUL_STCNT0, 1); bus_space_write_1(iot, ioh, TUL_SFIFO, 0); switch (iha_wait(sc, XF_FIFO_OUT)) { case -1: return (-1); case PHASE_DATA_OUT: break; default: /* Disable wide CPU to allow read 16 bits */ bus_space_write_1(iot, ioh, TUL_SCTRL1, EHRSL); bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); return (6); } } } static int iha_status_msg(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb; uint8_t msg; int phase; if ((phase = iha_wait(sc, CMD_COMP)) == -1) return (-1); scb = sc->sc_actscb; scb->ta_stat = bus_space_read_1(iot, ioh, TUL_SFIFO); if (phase == PHASE_MSG_OUT) { if ((sc->sc_status0 & SPERR) == 0) bus_space_write_1(iot, ioh, TUL_SFIFO, MSG_NOOP); else bus_space_write_1(iot, ioh, TUL_SFIFO, MSG_PARITY_ERROR); return (iha_wait(sc, XF_FIFO_OUT)); } else if (phase == PHASE_MSG_IN) { msg = bus_space_read_1(iot, ioh, TUL_SFIFO); if ((sc->sc_status0 & SPERR) != 0) switch (iha_wait(sc, MSG_ACCEPT)) { case -1: return (-1); case PHASE_MSG_OUT: bus_space_write_1(iot, ioh, TUL_SFIFO, MSG_PARITY_ERROR); return (iha_wait(sc, XF_FIFO_OUT)); default: iha_bad_seq(sc); return (-1); } if (msg == MSG_CMDCOMPLETE) { if ((scb->ta_stat & (SCSI_INTERM | SCSI_BUSY)) == SCSI_INTERM) { iha_bad_seq(sc); return (-1); } sc->sc_flags |= FLAG_EXPECT_DONE_DISC; bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); return (iha_wait(sc, MSG_ACCEPT)); } if ((msg == MSG_LINK_CMD_COMPLETE) || (msg == MSG_LINK_CMD_COMPLETEF)) { if ((scb->ta_stat & (SCSI_INTERM | SCSI_BUSY)) == SCSI_INTERM) return (iha_wait(sc, MSG_ACCEPT)); } } iha_bad_seq(sc); return (-1); } /* * iha_busfree - SCSI bus free detected as a result of a TIMEOUT or * DISCONNECT interrupt. Reset the tulip FIFO and * SCONFIG0 and enable hardware reselect. Move any active * SCB to sc_donescb list. Return an appropriate host status * if an I/O was active. */ static void iha_busfree(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb; bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); bus_space_write_1(iot, ioh, TUL_SCONFIG0, SCONFIG0DEFAULT); bus_space_write_1(iot, ioh, TUL_SCTRL1, EHRSL); scb = sc->sc_actscb; if (scb != NULL) { if (scb->status == STATUS_SELECT) /* selection timeout */ iha_append_done_scb(sc, scb, HOST_SEL_TOUT); else /* Unexpected bus free */ iha_append_done_scb(sc, scb, HOST_BAD_PHAS); } } /* * iha_resel - handle a detected SCSI bus reselection request. */ static int iha_resel(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct iha_scb *scb; struct tcs *tcs; uint8_t tag, target, lun, msg, abortmsg; if (sc->sc_actscb != NULL) { if ((sc->sc_actscb->status == STATUS_SELECT)) iha_push_pend_scb(sc, sc->sc_actscb); sc->sc_actscb = NULL; } target = bus_space_read_1(iot, ioh, TUL_SBID); lun = bus_space_read_1(iot, ioh, TUL_SALVC) & IHA_MSG_IDENTIFY_LUNMASK; tcs = &sc->sc_tcs[target]; bus_space_write_1(iot, ioh, TUL_SCONFIG0, tcs->sconfig0); bus_space_write_1(iot, ioh, TUL_SYNCM, tcs->syncm); abortmsg = MSG_ABORT; /* until a valid tag has been obtained */ if (tcs->ntagscb != NULL) /* There is a non-tagged I/O active on the target */ scb = tcs->ntagscb; else { /* * Since there is no active non-tagged operation * read the tag type, the tag itself, and find * the appropriate scb by indexing sc_scb with * the tag. */ switch (iha_wait(sc, MSG_ACCEPT)) { case -1: return (-1); case PHASE_MSG_IN: bus_space_write_4(iot, ioh, TUL_STCNT0, 1); if ((iha_wait(sc, XF_FIFO_IN)) == -1) return (-1); break; default: goto abort; } msg = bus_space_read_1(iot, ioh, TUL_SFIFO); /* Read Tag Msg */ if ((msg < MSG_SIMPLE_Q_TAG) || (msg > MSG_ORDERED_Q_TAG)) goto abort; switch (iha_wait(sc, MSG_ACCEPT)) { case -1: return (-1); case PHASE_MSG_IN: bus_space_write_4(iot, ioh, TUL_STCNT0, 1); if ((iha_wait(sc, XF_FIFO_IN)) == -1) return (-1); break; default: goto abort; } tag = bus_space_read_1(iot, ioh, TUL_SFIFO); /* Read Tag ID */ scb = &sc->sc_scb[tag]; abortmsg = MSG_ABORT_TAG; /* Now that we have valdid tag! */ } if ((scb->target != target) || (scb->lun != lun) || (scb->status != STATUS_BUSY)) { abort: iha_msgout_abort(sc, abortmsg); return (-1); } sc->sc_actscb = scb; if (iha_wait(sc, MSG_ACCEPT) == -1) return (-1); return (iha_next_state(sc)); } static int iha_msgin(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int flags; int phase; uint8_t msg; for (;;) { if ((bus_space_read_1(iot, ioh, TUL_SFIFOCNT) & FIFOC) > 0) bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); bus_space_write_4(iot, ioh, TUL_STCNT0, 1); phase = iha_wait(sc, XF_FIFO_IN); msg = bus_space_read_1(iot, ioh, TUL_SFIFO); switch (msg) { case MSG_DISCONNECT: sc->sc_flags |= FLAG_EXPECT_DISC; if (iha_wait(sc, MSG_ACCEPT) != -1) iha_bad_seq(sc); phase = -1; break; case MSG_SAVEDATAPOINTER: case MSG_RESTOREPOINTERS: case MSG_NOOP: phase = iha_wait(sc, MSG_ACCEPT); break; case MSG_MESSAGE_REJECT: /* XXX - need to clear FIFO like other 'Clear ATN'?*/ iha_set_ssig(sc, REQ | BSY | SEL | ATN, 0); flags = sc->sc_actscb->tcs->flags; if ((flags & FLAG_NO_NEG_SYNC) == 0) iha_set_ssig(sc, REQ | BSY | SEL, ATN); phase = iha_wait(sc, MSG_ACCEPT); break; case MSG_EXTENDED: phase = iha_msgin_extended(sc); break; case MSG_IGN_WIDE_RESIDUE: phase = iha_msgin_ignore_wid_resid(sc); break; case MSG_CMDCOMPLETE: sc->sc_flags |= FLAG_EXPECT_DONE_DISC; bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); phase = iha_wait(sc, MSG_ACCEPT); if (phase != -1) { iha_bad_seq(sc); return (-1); } break; default: printf("[debug] iha_msgin: bad msg type: %d\n", msg); phase = iha_msgout_reject(sc); break; } if (phase != PHASE_MSG_IN) return (phase); } /* NOTREACHED */ } static int iha_msgin_extended(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int flags, i, phase, msglen, msgcode; /* * XXX - can we just stop reading and reject, or do we have to * read all input, discarding the excess, and then reject */ for (i = 0; i < IHA_MAX_EXTENDED_MSG; i++) { phase = iha_wait(sc, MSG_ACCEPT); if (phase != PHASE_MSG_IN) return (phase); bus_space_write_4(iot, ioh, TUL_STCNT0, 1); if (iha_wait(sc, XF_FIFO_IN) == -1) return (-1); sc->sc_msg[i] = bus_space_read_1(iot, ioh, TUL_SFIFO); if (sc->sc_msg[0] == i) break; } msglen = sc->sc_msg[0]; msgcode = sc->sc_msg[1]; if ((msglen == MSG_EXT_SDTR_LEN) && (msgcode == MSG_EXT_SDTR)) { if (iha_msgin_sdtr(sc) == 0) { iha_sync_done(sc); return (iha_wait(sc, MSG_ACCEPT)); } iha_set_ssig(sc, REQ | BSY | SEL, ATN); phase = iha_wait(sc, MSG_ACCEPT); if (phase != PHASE_MSG_OUT) return (phase); /* Clear FIFO for important message - final SYNC offer */ bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); iha_sync_done(sc); /* This is our final offer */ } else if ((msglen == MSG_EXT_WDTR_LEN) && (msgcode == MSG_EXT_WDTR)) { flags = sc->sc_actscb->tcs->flags; if ((flags & FLAG_NO_WIDE) != 0) /* Offer 8bit xfers only */ sc->sc_msg[2] = MSG_EXT_WDTR_BUS_8_BIT; else if (sc->sc_msg[2] > MSG_EXT_WDTR_BUS_32_BIT) /* BAD MSG */ return (iha_msgout_reject(sc)); else if (sc->sc_msg[2] == MSG_EXT_WDTR_BUS_32_BIT) /* Offer 16bit instead */ sc->sc_msg[2] = MSG_EXT_WDTR_BUS_16_BIT; else { iha_wide_done(sc); if ((flags & FLAG_NO_NEG_SYNC) == 0) iha_set_ssig(sc, REQ | BSY | SEL, ATN); return (iha_wait(sc, MSG_ACCEPT)); } iha_set_ssig(sc, REQ | BSY | SEL, ATN); phase = iha_wait(sc, MSG_ACCEPT); if (phase != PHASE_MSG_OUT) return (phase); } else return (iha_msgout_reject(sc)); return (iha_msgout_extended(sc)); } /* * iha_msgin_sdtr - check SDTR msg in sc_msg. If the offer is * acceptable leave sc_msg as is and return 0. * If the negotiation must continue, modify sc_msg * as needed and return 1. Else return 0. */ static int iha_msgin_sdtr(struct iha_softc *sc) { int flags; int newoffer; uint8_t default_period; flags = sc->sc_actscb->tcs->flags; default_period = iha_rate_tbl[flags & FLAG_SCSI_RATE]; if (sc->sc_msg[3] == 0) /* target offered async only. Accept it. */ return (0); newoffer = 0; if ((flags & FLAG_NO_SYNC) != 0) { sc->sc_msg[3] = 0; newoffer = 1; } if (sc->sc_msg[3] > IHA_MAX_OFFSET) { sc->sc_msg[3] = IHA_MAX_OFFSET; newoffer = 1; } if (sc->sc_msg[2] < default_period) { sc->sc_msg[2] = default_period; newoffer = 1; } if (sc->sc_msg[2] > IHA_MAX_PERIOD) { /* Use async */ sc->sc_msg[3] = 0; newoffer = 1; } return (newoffer); } static int iha_msgin_ignore_wid_resid(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int phase; phase = iha_wait(sc, MSG_ACCEPT); if (phase == PHASE_MSG_IN) { phase = iha_wait(sc, XF_FIFO_IN); if (phase != -1) { bus_space_write_1(iot, ioh, TUL_SFIFO, 0); bus_space_read_1(iot, ioh, TUL_SFIFO); bus_space_read_1(iot, ioh, TUL_SFIFO); phase = iha_wait(sc, MSG_ACCEPT); } } return (phase); } static int iha_msgout(struct iha_softc *sc, uint8_t msg) { bus_space_write_1(sc->sc_iot, sc->sc_ioh, TUL_SFIFO, msg); return (iha_wait(sc, XF_FIFO_OUT)); } static void iha_msgout_abort(struct iha_softc *sc, uint8_t aborttype) { iha_set_ssig(sc, REQ | BSY | SEL, ATN); switch (iha_wait(sc, MSG_ACCEPT)) { case -1: break; case PHASE_MSG_OUT: sc->sc_flags |= FLAG_EXPECT_DISC; if (iha_msgout(sc, aborttype) != -1) iha_bad_seq(sc); break; default: iha_bad_seq(sc); break; } } static int iha_msgout_reject(struct iha_softc *sc) { iha_set_ssig(sc, REQ | BSY | SEL, ATN); if (iha_wait(sc, MSG_ACCEPT) == PHASE_MSG_OUT) return (iha_msgout(sc, MSG_MESSAGE_REJECT)); return (-1); } static int iha_msgout_extended(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int phase; bus_space_write_1(iot, ioh, TUL_SFIFO, MSG_EXTENDED); bus_space_write_multi_1(iot, ioh, TUL_SFIFO, sc->sc_msg, sc->sc_msg[0] + 1); phase = iha_wait(sc, XF_FIFO_OUT); bus_space_write_1(iot, ioh, TUL_SCTRL0, RSFIFO); iha_set_ssig(sc, REQ | BSY | SEL | ATN, 0); return (phase); } static int iha_msgout_wdtr(struct iha_softc *sc) { sc->sc_actscb->tcs->flags |= FLAG_WIDE_DONE; sc->sc_msg[0] = MSG_EXT_WDTR_LEN; sc->sc_msg[1] = MSG_EXT_WDTR; sc->sc_msg[2] = MSG_EXT_WDTR_BUS_16_BIT; return (iha_msgout_extended(sc)); } static int iha_msgout_sdtr(struct iha_softc *sc) { struct tcs *tcs = sc->sc_actscb->tcs; tcs->flags |= FLAG_SYNC_DONE; sc->sc_msg[0] = MSG_EXT_SDTR_LEN; sc->sc_msg[1] = MSG_EXT_SDTR; sc->sc_msg[2] = iha_rate_tbl[tcs->flags & FLAG_SCSI_RATE]; sc->sc_msg[3] = IHA_MAX_OFFSET; /* REQ/ACK */ return (iha_msgout_extended(sc)); } static void iha_wide_done(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tcs *tcs = sc->sc_actscb->tcs; tcs->syncm = 0; tcs->period = 0; tcs->offset = 0; if (sc->sc_msg[2] != 0) tcs->syncm |= PERIOD_WIDE_SCSI; tcs->sconfig0 &= ~ALTPD; tcs->flags &= ~FLAG_SYNC_DONE; tcs->flags |= FLAG_WIDE_DONE; iha_update_xfer_mode(sc, sc->sc_actscb->target); bus_space_write_1(iot, ioh, TUL_SCONFIG0, tcs->sconfig0); bus_space_write_1(iot, ioh, TUL_SYNCM, tcs->syncm); } static void iha_sync_done(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct tcs *tcs = sc->sc_actscb->tcs; int i; tcs->period = sc->sc_msg[2]; tcs->offset = sc->sc_msg[3]; if (tcs->offset != 0) { tcs->syncm |= tcs->offset; /* pick the highest possible rate */ for (i = 0; i < sizeof(iha_rate_tbl); i++) if (iha_rate_tbl[i] >= tcs->period) break; tcs->syncm |= (i << 4); tcs->sconfig0 |= ALTPD; } tcs->flags |= FLAG_SYNC_DONE; iha_update_xfer_mode(sc, sc->sc_actscb->target); bus_space_write_1(iot, ioh, TUL_SCONFIG0, tcs->sconfig0); bus_space_write_1(iot, ioh, TUL_SYNCM, tcs->syncm); } /* * iha_bad_seq - a SCSI bus phase was encountered out of the * correct/expected sequence. Reset the SCSI bus. */ static void iha_bad_seq(struct iha_softc *sc) { struct iha_scb *scb = sc->sc_actscb; if (scb != NULL) iha_append_done_scb(sc, scb, HOST_BAD_PHAS); iha_reset_scsi_bus(sc); iha_reset_chip(sc); } /* * iha_read_eeprom - read Serial EEPROM value & set to defaults * if required. XXX - Writing does NOT work! */ static void iha_read_eeprom(struct iha_softc *sc, struct iha_eeprom *eeprom) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; uint16_t *tbuf = (uint16_t *)eeprom; uint8_t gctrl; /* Enable EEProm programming */ gctrl = bus_space_read_1(iot, ioh, TUL_GCTRL0) | EEPRG; bus_space_write_1(iot, ioh, TUL_GCTRL0, gctrl); /* Read EEProm */ if (iha_se2_rd_all(sc, tbuf) == 0) panic("%s: cannot read EEPROM", sc->sc_dev.dv_xname); /* Disable EEProm programming */ gctrl = bus_space_read_1(iot, ioh, TUL_GCTRL0) & ~EEPRG; bus_space_write_1(iot, ioh, TUL_GCTRL0, gctrl); } #ifdef notused /* * iha_se2_update_all - Update SCSI H/A configuration parameters from * serial EEPROM Setup default pattern. Only * change those values different from the values * in iha_eeprom. */ static void iha_se2_update_all(struct iha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; uint16_t *np; uint32_t chksum; int i; /* Enable erase/write state of EEPROM */ iha_se2_instr(sc, ENABLE_ERASE); bus_space_write_1(iot, ioh, TUL_NVRAM, 0); EEP_WAIT(); np = (uint16_t *)&eeprom_default; for (i = 0, chksum = 0; i < EEPROM_SIZE - 1; i++) { iha_se2_wr(sc, i, *np); chksum += *np++; } chksum &= 0x0000ffff; iha_se2_wr(sc, 31, chksum); /* Disable erase/write state of EEPROM */ iha_se2_instr(sc, 0); bus_space_write_1(iot, ioh, TUL_NVRAM, 0); EEP_WAIT(); } /* * iha_se2_wr - write the given 16 bit value into the Serial EEPROM * at the specified offset */ static void iha_se2_wr(struct iha_softc *sc, int addr, uint16_t writeword) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int i, bit; /* send 'WRITE' Instruction == address | WRITE bit */ iha_se2_instr(sc, addr | WRITE); for (i = 16; i > 0; i--) { if (writeword & (1 << (i - 1))) bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS | NVRDO); else bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS); EEP_WAIT(); bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS | NVRCK); EEP_WAIT(); } bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS); EEP_WAIT(); bus_space_write_1(iot, ioh, TUL_NVRAM, 0); EEP_WAIT(); bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS); EEP_WAIT(); for (;;) { bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS | NVRCK); EEP_WAIT(); bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS); EEP_WAIT(); bit = bus_space_read_1(iot, ioh, TUL_NVRAM) & NVRDI; EEP_WAIT(); if (bit != 0) break; /* write complete */ } bus_space_write_1(iot, ioh, TUL_NVRAM, 0); } #endif /* * iha_se2_rd - read & return the 16 bit value at the specified * offset in the Serial E2PROM * */ static uint16_t iha_se2_rd(struct iha_softc *sc, int addr) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int i, bit; uint16_t readword; /* Send 'READ' instruction == address | READ bit */ iha_se2_instr(sc, addr | READ); readword = 0; for (i = 16; i > 0; i--) { bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS | NVRCK); EEP_WAIT(); bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS); EEP_WAIT(); /* sample data after the following edge of clock */ bit = bus_space_read_1(iot, ioh, TUL_NVRAM) & NVRDI ? 1 : 0; EEP_WAIT(); readword |= bit << (i - 1); } bus_space_write_1(iot, ioh, TUL_NVRAM, 0); return (readword); } /* * iha_se2_rd_all - Read SCSI H/A config parameters from serial EEPROM */ static int iha_se2_rd_all(struct iha_softc *sc, uint16_t *tbuf) { struct iha_eeprom *eeprom = (struct iha_eeprom *)tbuf; uint32_t chksum; int i; for (i = 0, chksum = 0; i < EEPROM_SIZE - 1; i++) { *tbuf = iha_se2_rd(sc, i); chksum += *tbuf++; } *tbuf = iha_se2_rd(sc, 31); /* read checksum from EEPROM */ chksum &= 0x0000ffff; /* lower 16 bits */ return (eeprom->signature == EEP_SIGNATURE) && (eeprom->checksum == chksum); } /* * iha_se2_instr - write an octet to serial E2PROM one bit at a time */ static void iha_se2_instr(struct iha_softc *sc, int instr) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int b, i; b = NVRCS | NVRDO; /* Write the start bit (== 1) */ bus_space_write_1(iot, ioh, TUL_NVRAM, b); EEP_WAIT(); bus_space_write_1(iot, ioh, TUL_NVRAM, b | NVRCK); EEP_WAIT(); for (i = 8; i > 0; i--) { if (instr & (1 << (i - 1))) b = NVRCS | NVRDO; /* Write a 1 bit */ else b = NVRCS; /* Write a 0 bit */ bus_space_write_1(iot, ioh, TUL_NVRAM, b); EEP_WAIT(); bus_space_write_1(iot, ioh, TUL_NVRAM, b | NVRCK); EEP_WAIT(); } bus_space_write_1(iot, ioh, TUL_NVRAM, NVRCS); }