/* $NetBSD: if_qn.c,v 1.6 1996/05/07 00:46:47 thorpej Exp $ */ /* * Copyright (c) 1995 Mika Kortelainen * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Mika Kortelainen * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Thanks for Aspecs Oy (Finland) for the data book for the NIC used * in this card and also many thanks for the Resource Management Force * (QuickNet card manufacturer) and especially Daniel Koch for providing * me with the necessary 'inside' information to write the driver. * * This is partly based on other code: * - if_ed.c: basic function structure for Ethernet driver and now also * qn_put() is done similarly, i.e. no extra packet buffers. * * Device driver for National Semiconductor DS8390/WD83C690 based ethernet * adapters. * * Copyright (c) 1994, 1995 Charles M. Hannum. All rights reserved. * * Copyright (C) 1993, David Greenman. This software may be used, * modified, copied, distributed, and sold, in both source and binary * form provided that the above copyright and these terms are retained. * Under no circumstances is the author responsible for the proper * functioning of this software, nor does the author assume any * responsibility for damages incurred with its use. * * - if_es.c: used as an example of -current driver * * Copyright (c) 1995 Michael L. Hitch * All rights reserved. * * - if_fe.c: some ideas for error handling for qn_rint() which might * have fixed those random lock ups, too. * * All Rights Reserved, Copyright (C) Fujitsu Limited 1995 * * * TODO: * - add multicast support */ #include "qn.h" #if NQN > 0 #define QN_DEBUG #define QN_DEBUG1_no /* hides some old tests */ #include "bpfilter.h" /* * Fujitsu MB86950 Ethernet Controller (as used in the QuickNet QN2000 * Ethernet card) */ #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #ifdef NS #include #include #endif #include #include #include #include #include #include #define ETHER_MIN_LEN 60 #define ETHER_MAX_LEN 1514 #define ETHER_HDR_SIZE 14 #define NIC_R_MASK (R_INT_PKT_RDY | R_INT_ALG_ERR |\ R_INT_CRC_ERR | R_INT_OVR_FLO) #define MAX_PACKETS 30 /* max number of packets read per interrupt */ /* * Ethernet software status per interface * * Each interface is referenced by a network interface structure, * qn_if, which the routing code uses to locate the interface. * This structure contains the output queue for the interface, its address, ... */ struct qn_softc { struct device sc_dev; struct isr sc_isr; struct arpcom sc_arpcom; /* Common ethernet structures */ u_char volatile *sc_base; u_char volatile *sc_nic_base; u_short volatile *nic_fifo; u_short volatile *nic_r_status; u_short volatile *nic_t_status; u_short volatile *nic_r_mask; u_short volatile *nic_t_mask; u_short volatile *nic_r_mode; u_short volatile *nic_t_mode; u_short volatile *nic_reset; u_short volatile *nic_len; u_char transmit_pending; #if NBPFILTER > 0 caddr_t sc_bpf; #endif } qn_softc[NQN]; #if NBPFILTER > 0 #include #include #endif int qnmatch __P((struct device *, void *, void *)); void qnattach __P((struct device *, struct device *, void *)); int qnintr __P((void *)); int qnioctl __P((struct ifnet *, u_long, caddr_t)); void qnstart __P((struct ifnet *)); void qnwatchdog __P((struct ifnet *)); void qnreset __P((struct qn_softc *)); void qninit __P((struct qn_softc *)); void qnstop __P((struct qn_softc *)); static u_short qn_put __P((u_short volatile *, struct mbuf *)); static void qn_rint __P((struct qn_softc *, u_short)); static void qn_flush __P((struct qn_softc *)); static void inline word_copy_from_card __P((u_short volatile *, u_short *, u_short)); static void inline word_copy_to_card __P((u_short *, u_short volatile *, u_short)); static void qn_get_packet __P((struct qn_softc *, u_short)); #ifdef QN_DEBUG1 static void qn_dump __P((struct qn_softc *)); #endif struct cfattach qn_ca = { sizeof(struct qn_softc), qnmatch, qnattach }; struct cfdriver qn_cd = { NULL, "qn", DV_IFNET }; int qnmatch(parent, match, aux) struct device *parent; void *match, *aux; { struct zbus_args *zap; zap = (struct zbus_args *)aux; /* RMF QuickNet QN2000 EtherNet card */ if (zap->manid == 2011 && zap->prodid == 2) return (1); return (0); } /* * Interface exists: make available by filling in network interface * record. System will initialize the interface when it is ready * to accept packets. */ void qnattach(parent, self, aux) struct device *parent, *self; void *aux; { struct zbus_args *zap; struct qn_softc *sc = (struct qn_softc *)self; struct ifnet *ifp = &sc->sc_arpcom.ac_if; zap = (struct zbus_args *)aux; sc->sc_base = zap->va; sc->sc_nic_base = sc->sc_base + QUICKNET_NIC_BASE; sc->nic_fifo = (u_short volatile *)(sc->sc_nic_base + NIC_BMPR0); sc->nic_len = (u_short volatile *)(sc->sc_nic_base + NIC_BMPR2); sc->nic_t_status = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR0); sc->nic_r_status = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR2); sc->nic_t_mask = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR1); sc->nic_r_mask = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR3); sc->nic_t_mode = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR4); sc->nic_r_mode = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR5); sc->nic_reset = (u_short volatile *)(sc->sc_nic_base + NIC_DLCR6); sc->transmit_pending = 0; /* * The ethernet address of the board (1st three bytes are the vendor * address, the rest is the serial number of the board). */ sc->sc_arpcom.ac_enaddr[0] = 0x5c; sc->sc_arpcom.ac_enaddr[1] = 0x5c; sc->sc_arpcom.ac_enaddr[2] = 0x00; sc->sc_arpcom.ac_enaddr[3] = (zap->serno >> 16) & 0xff; sc->sc_arpcom.ac_enaddr[4] = (zap->serno >> 8) & 0xff; sc->sc_arpcom.ac_enaddr[5] = zap->serno & 0xff; /* set interface to stopped condition (reset) */ qnstop(sc); bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ); ifp->if_softc = sc; ifp->if_ioctl = qnioctl; ifp->if_watchdog = qnwatchdog; ifp->if_output = ether_output; ifp->if_start = qnstart; /* XXX IFF_MULTICAST */ ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS; ifp->if_mtu = ETHERMTU; /* Attach the interface. */ if_attach(ifp); ether_ifattach(ifp); #ifdef QN_DEBUG printf(": hardware address %s\n", ether_sprintf(sc->sc_arpcom.ac_enaddr)); #endif #if NBPFILTER > 0 bpfattach(&sc->sc_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif sc->sc_isr.isr_intr = qnintr; sc->sc_isr.isr_arg = sc; sc->sc_isr.isr_ipl = 2; add_isr(&sc->sc_isr); } /* * Initialize device * */ void qninit(sc) struct qn_softc *sc; { struct ifnet *ifp = &sc->sc_arpcom.ac_if; u_short i; static retry = 0; *sc->nic_r_mask = NIC_R_MASK; *sc->nic_t_mode = NO_LOOPBACK; if (sc->sc_arpcom.ac_if.if_flags & IFF_PROMISC) { *sc->nic_r_mode = PROMISCUOUS_MODE; log(LOG_INFO, "qn: Promiscuous mode (not tested)\n"); } else *sc->nic_r_mode = NORMAL_MODE; /* Set physical ethernet address. */ for (i = 0; i < ETHER_ADDR_LEN; i++) *((u_short volatile *)(sc->sc_nic_base+ QNET_HARDWARE_ADDRESS+2*i)) = ((((u_short)sc->sc_arpcom.ac_enaddr[i]) << 8) | sc->sc_arpcom.ac_enaddr[i]); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; sc->transmit_pending = 0; qn_flush(sc); /* QuickNet magic. Done ONLY once, otherwise a lockup occurs. */ if (retry == 0) { *((u_short volatile *)(sc->sc_nic_base + QNET_MAGIC)) = 0; retry = 1; } /* Enable data link controller. */ *sc->nic_reset = ENABLE_DLC; /* Attempt to start output, if any. */ qnstart(ifp); } /* * Device timeout/watchdog routine. Entered if the device neglects to * generate an interrupt after a transmit has been started on it. */ void qnwatchdog(ifp) struct ifnet *ifp; { struct qn_softc *sc = ifp->if_softc; log(LOG_INFO, "qn: device timeout (watchdog)\n"); ++sc->sc_arpcom.ac_if.if_oerrors; qnreset(sc); } /* * Flush card's buffer RAM. */ static void qn_flush(sc) struct qn_softc *sc; { #if 1 /* Read data until bus read error (i.e. buffer empty). */ while (!(*sc->nic_r_status & R_BUS_RD_ERR)) (void)(*sc->nic_fifo); #else /* Read data twice to clear some internal pipelines. */ (void)(*sc->nic_fifo); (void)(*sc->nic_fifo); #endif /* Clear bus read error. */ *sc->nic_r_status = R_BUS_RD_ERR; } /* * Reset the interface. * */ void qnreset(sc) struct qn_softc *sc; { int s; s = splnet(); qnstop(sc); qninit(sc); splx(s); } /* * Take interface offline. */ void qnstop(sc) struct qn_softc *sc; { /* Stop the interface. */ *sc->nic_reset = DISABLE_DLC; delay(200); *sc->nic_t_status = CLEAR_T_ERR; *sc->nic_t_mask = CLEAR_T_MASK; *sc->nic_r_status = CLEAR_R_ERR; *sc->nic_r_mask = CLEAR_R_MASK; /* Turn DMA off */ *((u_short volatile *)(sc->sc_nic_base + NIC_BMPR4)) = 0; /* Accept no packets. */ *sc->nic_r_mode = 0; *sc->nic_t_mode = 0; qn_flush(sc); } /* * Start output on interface. Get another datagram to send * off the interface queue, and copy it to the * interface before starting the output. * * This assumes that it is called inside a critical section... * */ void qnstart(ifp) struct ifnet *ifp; { struct qn_softc *sc = ifp->if_softc; struct mbuf *m; u_short len; int timout = 60000; if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) return; IF_DEQUEUE(&sc->sc_arpcom.ac_if.if_snd, m); if (m == 0) return; #if NBPFILTER > 0 /* * If bpf is listening on this interface, let it * see the packet before we commit it to the wire * * (can't give the copy in QuickNet card RAM to bpf, because * that RAM is not visible to the host but is read from FIFO) * */ log(LOG_INFO, "NBPFILTER... no-one has tested this with qn.\n"); if (sc->sc_bpf) bpf_mtap(sc->sc_bpf, m); #endif len = qn_put(sc->nic_fifo, m); m_freem(m); /* * Really transmit the packet. */ /* Set packet length (byte-swapped). */ len = ((len >> 8) & 0x0007) | TRANSMIT_START | ((len & 0x00ff) << 8); *sc->nic_len = len; /* Wait for the packet to really leave. */ while (!(*sc->nic_t_status & T_TMT_OK) && --timout) { if ((timout % 10000) == 0) log(LOG_INFO, "qn: timout...\n"); } if (timout == 0) /* Maybe we should try to recover from this one? */ /* But now, let's just fall thru and hope the best... */ log(LOG_INFO, "qn: transmit timout (fatal?)\n"); sc->transmit_pending = 1; *sc->nic_t_mask = INT_TMT_OK | INT_SIXTEEN_COL; sc->sc_arpcom.ac_if.if_flags |= IFF_OACTIVE; ifp->if_timer = 2; } /* * Memory copy, copies word at a time */ static void inline word_copy_from_card(card, b, len) u_short volatile *card; u_short *b, len; { register u_short l = len/2; while (l--) *b++ = *card; } static void inline word_copy_to_card(a, card, len) u_short *a; u_short volatile *card; u_short len; { register u_short l = len/2; while (l--) *card = *a++; } /* * Copy packet from mbuf to the board memory * * Uses an extra buffer/extra memory copy, * unless the whole packet fits in one mbuf. * */ static u_short qn_put(addr, m) u_short volatile *addr; struct mbuf *m; { u_short *data, savebyte[2]; int len, wantbyte; u_short totlen; totlen = wantbyte = 0; for (; m != NULL; m = m->m_next) { data = mtod(m, u_short *); len = m->m_len; totlen += len; if (len > 0) { /* Finish the last word. */ if (wantbyte) { savebyte[1] = *data; *addr = *((u_short *)savebyte); data++; len--; wantbyte = 0; } /* Output contiguous words. */ if (len > 1) { word_copy_to_card(data, addr, len); data += len & ~1; len &= 1; } /* Save last byte, if necessary. */ if (len == 1) { savebyte[0] = *data; wantbyte = 1; } } } if (wantbyte) { savebyte[1] = 0; *addr = *((u_short *)savebyte); } if(totlen < ETHER_MIN_LEN) { /* * Fill the rest of the packet with zeros. * N.B.: This is required! Otherwise MB86950 fails. */ for(len = totlen + 1; len < ETHER_MIN_LEN; len += 2) *addr = (u_short)0x0000; totlen = ETHER_MIN_LEN; } return (totlen); } /* * Copy packet from board RAM. * * Trailers not supported. * */ static void qn_get_packet(sc, len) struct qn_softc *sc; u_short len; { register u_short volatile *nic_fifo_ptr = sc->nic_fifo; struct ether_header *eh; struct mbuf *m, *dst, *head = NULL; register u_short len1; u_short amount; /* Allocate header mbuf. */ MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) goto bad; /* * Round len to even value. */ if (len & 1) len++; m->m_pkthdr.rcvif = &sc->sc_arpcom.ac_if; m->m_pkthdr.len = len; m->m_len = 0; head = m; eh = mtod(head, struct ether_header *); word_copy_from_card(nic_fifo_ptr, mtod(head, u_short *), sizeof(struct ether_header)); head->m_len += sizeof(struct ether_header); len -= sizeof(struct ether_header); while (len > 0) { len1 = len; amount = M_TRAILINGSPACE(m); if (amount == 0) { /* Allocate another mbuf. */ dst = m; MGET(m, M_DONTWAIT, MT_DATA); if (m == NULL) goto bad; if (len1 >= MINCLSIZE) MCLGET(m, M_DONTWAIT); m->m_len = 0; dst->m_next = m; amount = M_TRAILINGSPACE(m); } if (amount < len1) len1 = amount; word_copy_from_card(nic_fifo_ptr, (u_short *)(mtod(m, caddr_t) + m->m_len), len1); m->m_len += len1; len -= len1; } #if NBPFILTER > 0 log(LOG_INFO, "qn: Beware, an untested code section\n"); if (sc->sc_bpf) { bpf_mtap(sc->sc_bpf, head); /* * The interface cannot be in promiscuous mode if there are * no BPF listeners. And in prom. mode we have to check * if the packet is really ours... */ if ((sc->sc_arpcom.ac_if.if_flags & IFF_PROMISC) && (eh->ether_dhost[0] & 1) == 0 && /* not bcast or mcast */ bcmp(eh->ether_dhost, sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN) != 0) { m_freem(head); return; } } #endif m_adj(head, sizeof(struct ether_header)); ether_input(&sc->sc_arpcom.ac_if, eh, head); return; bad: if (head) { m_freem(head); log(LOG_INFO, "qn_get_packet: mbuf alloc failed\n"); } } /* * Ethernet interface receiver interrupt. */ static void qn_rint(sc, rstat) struct qn_softc *sc; u_short rstat; { int i; u_short len, status; /* Clear the status register. */ *sc->nic_r_status = CLEAR_R_ERR; /* * Was there some error? * Some of them are senseless because they are masked off. * XXX */ if (rstat & 0x0101) { #ifdef QN_DEBUG log(LOG_INFO, "Overflow\n"); #endif ++sc->sc_arpcom.ac_if.if_ierrors; } if (rstat & 0x0202) { #ifdef QN_DEBUG log(LOG_INFO, "CRC Error\n"); #endif ++sc->sc_arpcom.ac_if.if_ierrors; } if (rstat & 0x0404) { #ifdef QN_DEBUG log(LOG_INFO, "Alignment error\n"); #endif ++sc->sc_arpcom.ac_if.if_ierrors; } if (rstat & 0x0808) { /* Short packet (these may occur and are * no reason to worry about - or maybe * they are?). */ #ifdef QN_DEBUG log(LOG_INFO, "Short packet\n"); #endif ++sc->sc_arpcom.ac_if.if_ierrors; } if (rstat & 0x4040) { #ifdef QN_DEBUG log(LOG_INFO, "Bus read error\n"); #endif ++sc->sc_arpcom.ac_if.if_ierrors; qnreset(sc); } /* * Read at most MAX_PACKETS packets per interrupt */ for (i = 0; i < MAX_PACKETS; i++) { if (*sc->nic_r_mode & RM_BUF_EMP) /* Buffer empty. */ break; /* * Read the first word: upper byte contains useful * information. */ status = *sc->nic_fifo; if ((status & 0x7000) != 0x2000) { log(LOG_INFO, "qn: ERROR: status=%04x\n", status); continue; } /* * Read packet length (byte-swapped). * CRC is stripped off by the NIC. */ len = *sc->nic_fifo; len = ((len << 8) & 0xff00) | ((len >> 8) & 0x00ff); #ifdef QN_DEBUG if (len > ETHER_MAX_LEN || len < ETHER_HDR_SIZE) { log(LOG_WARNING, "%s: received a %s packet? (%u bytes)\n", sc->sc_dev.dv_xname, len < ETHER_HDR_SIZE ? "partial" : "big", len); ++sc->sc_arpcom.ac_if.if_ierrors; continue; } #endif #ifdef QN_DEBUG if (len < ETHER_MIN_LEN) log(LOG_WARNING, "%s: received a short packet? (%u bytes)\n", sc->sc_dev.dv_xname, len); #endif /* Read the packet. */ qn_get_packet(sc, len); ++sc->sc_arpcom.ac_if.if_ipackets; } #ifdef QN_DEBUG /* This print just to see whether MAX_PACKETS is large enough. */ if (i == MAX_PACKETS) log(LOG_INFO, "used all the %d loops\n", MAX_PACKETS); #endif } /* * Our interrupt routine */ int qnintr(arg) void *arg; { struct qn_softc *sc = arg; u_short tint, rint, tintmask; char return_tintmask = 0; /* * If the driver has not been initialized, just return immediately. * This also happens if there is no QuickNet board present. */ if (sc->sc_base == NULL) return (0); /* Get interrupt statuses and masks. */ rint = (*sc->nic_r_status) & NIC_R_MASK; tintmask = *sc->nic_t_mask; tint = (*sc->nic_t_status) & tintmask; if (tint == 0 && rint == 0) return (0); /* Disable interrupts so that we won't miss anything. */ *sc->nic_r_mask = CLEAR_R_MASK; *sc->nic_t_mask = CLEAR_T_MASK; /* * Handle transmitter interrupts. Some of them are not asked for * but do happen, anyway. */ if (tint != 0) { /* Clear transmit interrupt status. */ *sc->nic_t_status = CLEAR_T_ERR; if (sc->transmit_pending && (tint & T_TMT_OK)) { sc->transmit_pending = 0; /* * Update total number of successfully * transmitted packets. */ sc->sc_arpcom.ac_if.if_opackets++; } if (tint & T_SIXTEEN_COL) { /* * 16 collision (i.e., packet lost). */ log(LOG_INFO, "qn: 16 collision - packet lost\n"); #ifdef QN_DEBUG1 qn_dump(sc); #endif sc->sc_arpcom.ac_if.if_oerrors++; sc->sc_arpcom.ac_if.if_collisions += 16; sc->transmit_pending = 0; } if (sc->transmit_pending) { log(LOG_INFO, "qn:still pending...\n"); /* Must return transmission interrupt mask. */ return_tintmask = 1; } else { sc->sc_arpcom.ac_if.if_flags &= ~IFF_OACTIVE; /* Clear watchdog timer. */ sc->sc_arpcom.ac_if.if_timer = 0; } } else return_tintmask = 1; /* * Handle receiver interrupts. */ if (rint != 0) qn_rint(sc, rint); if ((sc->sc_arpcom.ac_if.if_flags & IFF_OACTIVE) == 0) qnstart(&sc->sc_arpcom.ac_if); else if (return_tintmask == 1) *sc->nic_t_mask = tintmask; /* Set receive interrupt mask back. */ *sc->nic_r_mask = NIC_R_MASK; return (1); } /* * Process an ioctl request. This code needs some work - it looks pretty ugly. * I somehow think that this is quite a common excuse... ;-) */ int qnioctl(ifp, command, data) register struct ifnet *ifp; u_long command; caddr_t data; { struct qn_softc *sc = ifp->if_softc; register struct ifaddr *ifa = (struct ifaddr *)data; #if 0 struct ifreg *ifr = (struct ifreg *)data; #endif int s, error = 0; s = splnet(); switch (command) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: qnstop(sc); qninit(sc); arp_ifinit(&sc->sc_arpcom, ifa); break; #endif #ifdef NS case AF_NS: { register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr); if (ns_nullhost(*ina)) ina->x_host = *(union ns_host *)(sc->sc_arpcom.ac_enaddr); else bcopy(ina->x_host.c_host, sc->sc_arpcom.ac_enaddr, sizeof(sc->sc_arpcom.ac_enaddr)); qnstop(sc); qninit(sc); break; } #endif default: log(LOG_INFO, "qn:sa_family:default (not tested)\n"); qnstop(sc); qninit(sc); break; } break; case SIOCSIFFLAGS: if ((ifp->if_flags & IFF_UP) == 0 && (ifp->if_flags & IFF_RUNNING) != 0) { /* * If interface is marked down and it is running, then * stop it. */ #ifdef QN_DEBUG1 qn_dump(sc); #endif qnstop(sc); ifp->if_flags &= ~IFF_RUNNING; } else if ((ifp->if_flags & IFF_UP) != 0 && (ifp->if_flags & IFF_RUNNING) == 0) { /* * If interface is marked up and it is stopped, then * start it. */ qninit(sc); } else { /* * Something else... we won't do anything so we won't * break anything (hope so). */ #ifdef QN_DEBUG1 log(LOG_INFO, "Else branch...\n"); #endif } break; case SIOCADDMULTI: case SIOCDELMULTI: log(LOG_INFO, "qnioctl: multicast not done yet\n"); #if 0 error = (command == SIOCADDMULTI) ? ether_addmulti(ifr, &sc->sc_arpcom) : ether_delmulti(ifr, &sc->sc_arpcom); if (error == ENETRESET) { /* * Multicast list has changed; set the hardware filter * accordingly. */ log(LOG_INFO, "qnioctl: multicast not done yet\n"); error = 0; } #else error = EINVAL; #endif break; default: log(LOG_INFO, "qnioctl: default\n"); error = EINVAL; } splx(s); return (error); } /* * Dump some register information. */ #ifdef QN_DEBUG1 static void qn_dump(sc) struct qn_softc *sc; { log(LOG_INFO, "t_status : %04x\n", *sc->nic_t_status); log(LOG_INFO, "t_mask : %04x\n", *sc->nic_t_mask); log(LOG_INFO, "t_mode : %04x\n", *sc->nic_t_mode); log(LOG_INFO, "r_status : %04x\n", *sc->nic_r_status); log(LOG_INFO, "r_mask : %04x\n", *sc->nic_r_mask); log(LOG_INFO, "r_mode : %04x\n", *sc->nic_r_mode); log(LOG_INFO, "pending : %02x\n", sc->transmit_pending); log(LOG_INFO, "if_flags : %04x\n", sc->sc_arpcom.ac_if.if_flags); } #endif #endif /* NQN > 0 */