/* $NetBSD: cypide.c,v 1.15 2005/05/24 05:25:15 lukem Exp $ */ /* * Copyright (c) 1999, 2000, 2001 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #include __KERNEL_RCSID(0, "$NetBSD: cypide.c,v 1.15 2005/05/24 05:25:15 lukem Exp $"); #include #include #include #include #include #include #include #include #include static void cy693_chip_map(struct pciide_softc*, struct pci_attach_args*); static void cy693_setup_channel(struct ata_channel*); static int cypide_match(struct device *, struct cfdata *, void *); static void cypide_attach(struct device *, struct device *, void *); CFATTACH_DECL(cypide, sizeof(struct pciide_softc), cypide_match, cypide_attach, NULL, NULL); static const struct pciide_product_desc pciide_cypress_products[] = { { PCI_PRODUCT_CONTAQ_82C693, IDE_16BIT_IOSPACE, "Cypress 82C693 IDE Controller", cy693_chip_map, }, { 0, 0, NULL, NULL } }; static int cypide_match(struct device *parent, struct cfdata *match, void *aux) { struct pci_attach_args *pa = aux; if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CONTAQ && PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE && PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) { if (pciide_lookup_product(pa->pa_id, pciide_cypress_products)) return (2); } return (0); } static void cypide_attach(struct device *parent, struct device *self, void *aux) { struct pci_attach_args *pa = aux; struct pciide_softc *sc = (struct pciide_softc *)self; pciide_common_attach(sc, pa, pciide_lookup_product(pa->pa_id, pciide_cypress_products)); } static void cy693_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa) { struct pciide_channel *cp; pcireg_t interface = PCI_INTERFACE(pa->pa_class); bus_size_t cmdsize, ctlsize; if (pciide_chipen(sc, pa) == 0) return; /* * this chip has 2 PCI IDE functions, one for primary and one for * secondary. So we need to call pciide_mapregs_compat() with * the real channel */ if (pa->pa_function == 1) { sc->sc_cy_compatchan = 0; } else if (pa->pa_function == 2) { sc->sc_cy_compatchan = 1; } else { aprint_error("%s: unexpected PCI function %d\n", sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, pa->pa_function); return; } if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) { aprint_normal("%s: bus-master DMA support present", sc->sc_wdcdev.sc_atac.atac_dev.dv_xname); pciide_mapreg_dma(sc, pa); } else { aprint_normal("%s: hardware does not support DMA", sc->sc_wdcdev.sc_atac.atac_dev.dv_xname); sc->sc_dma_ok = 0; } aprint_normal("\n"); sc->sc_cy_handle = cy82c693_init(pa->pa_iot); if (sc->sc_cy_handle == NULL) { aprint_error("%s: unable to map hyperCache control registers\n", sc->sc_wdcdev.sc_atac.atac_dev.dv_xname); sc->sc_dma_ok = 0; } sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DATA32; if (sc->sc_dma_ok) { sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA; sc->sc_wdcdev.irqack = pciide_irqack; } sc->sc_wdcdev.sc_atac.atac_pio_cap = 4; sc->sc_wdcdev.sc_atac.atac_dma_cap = 2; sc->sc_wdcdev.sc_atac.atac_set_modes = cy693_setup_channel; sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray; sc->sc_wdcdev.sc_atac.atac_nchannels = 1; wdc_allocate_regs(&sc->sc_wdcdev); /* Only one channel for this chip; if we are here it's enabled */ cp = &sc->pciide_channels[0]; sc->wdc_chanarray[0] = &cp->ata_channel; cp->name = PCIIDE_CHANNEL_NAME(0); cp->ata_channel.ch_channel = 0; cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac; cp->ata_channel.ch_queue = malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT); if (cp->ata_channel.ch_queue == NULL) { aprint_error("%s primary channel: " "can't allocate memory for command queue", sc->sc_wdcdev.sc_atac.atac_dev.dv_xname); return; } aprint_normal("%s: primary channel %s to ", sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, (interface & PCIIDE_INTERFACE_SETTABLE(0)) ? "configured" : "wired"); if (interface & PCIIDE_INTERFACE_PCI(0)) { aprint_normal("native-PCI mode\n"); pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize, pciide_pci_intr); } else { aprint_normal("compatibility mode\n"); pciide_mapregs_compat(pa, cp, sc->sc_cy_compatchan, &cmdsize, &ctlsize); if ((cp->ata_channel.ch_flags & ATACH_DISABLED) == 0) pciide_map_compat_intr(pa, cp, sc->sc_cy_compatchan); } wdcattach(&cp->ata_channel); } static void cy693_setup_channel(struct ata_channel *chp) { struct ata_drive_datas *drvp; int drive; u_int32_t cy_cmd_ctrl; u_int32_t idedma_ctl; struct pciide_channel *cp = CHAN_TO_PCHAN(chp); struct pciide_softc *sc = CHAN_TO_PCIIDE(chp); int dma_mode = -1; ATADEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n", pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE); cy_cmd_ctrl = idedma_ctl = 0; /* setup DMA if needed */ pciide_channel_dma_setup(cp); for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; /* If no drive, skip */ if ((drvp->drive_flags & DRIVE) == 0) continue; /* add timing values, setup DMA if needed */ if (drvp->drive_flags & DRIVE_DMA) { idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive); /* use Multiword DMA */ if (dma_mode == -1 || dma_mode > drvp->DMA_mode) dma_mode = drvp->DMA_mode; } cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] << CY_CMD_CTRL_IOW_PULSE_OFF(drive)); cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] << CY_CMD_CTRL_IOW_REC_OFF(drive)); cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] << CY_CMD_CTRL_IOR_PULSE_OFF(drive)); cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] << CY_CMD_CTRL_IOR_REC_OFF(drive)); } pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl); chp->ch_drive[0].DMA_mode = dma_mode; chp->ch_drive[1].DMA_mode = dma_mode; if (dma_mode == -1) dma_mode = 0; if (sc->sc_cy_handle != NULL) { /* Note: `multiple' is implied. */ cy82c693_write(sc->sc_cy_handle, (sc->sc_cy_compatchan == 0) ? CY_DMA_IDX_PRIMARY : CY_DMA_IDX_SECONDARY, dma_mode); } if (idedma_ctl != 0) { /* Add software bits in status register */ bus_space_write_1(sc->sc_dma_iot, cp->dma_iohs[IDEDMA_CTL], 0, idedma_ctl); } ATADEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n", pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE); }