/* $NetBSD: wd.c,v 1.7 2003/07/15 01:26:32 lukem Exp $ */ /* * Copyright (c) 1994, 1995 Charles M. Hannum. All rights reserved. * * DMA and multi-sector PIO handling are derived from code contributed by * Onno van der Linden. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles M. Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: wd.c,v 1.7 2003/07/15 01:26:32 lukem Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define WAITTIME (4 * hz) /* time to wait for a completion */ #define RECOVERYTIME (hz / 2) /* time to recover from an error */ #define WDCDELAY 100 #define WDCNDELAY 100000 /* delay = 100us; so 10s for a controller state change */ #if 0 /* If you enable this, it will report any delays more than 100us * N long. */ #define WDCNDELAY_DEBUG 10 #endif #define WDIORETRIES 5 /* number of retries before giving up */ #define WDUNIT(dev) DISKUNIT(dev) #define WDPART(dev) DISKPART(dev) #define MAKEWDDEV(maj, unit, part) MAKEDISKDEV(maj, unit, part) #define WDLABELDEV(dev) (MAKEWDDEV(major(dev), WDUNIT(dev), RAW_PART)) struct wd_softc { struct device sc_dev; struct disk sc_dk; /* Information about the current transfer: */ daddr_t sc_blkno; /* starting block number */ int sc_bcount; /* byte count left */ int sc_skip; /* bytes already transferred */ int sc_nblks; /* number of blocks currently transferring */ int sc_nbytes; /* number of bytes currently transferring */ /* Long-term state: */ int sc_drive; /* physical unit number */ int sc_state; /* control state */ #define RECAL 0 /* recalibrate */ #define RECAL_WAIT 1 /* done recalibrating */ #define GEOMETRY 2 /* upload geometry */ #define GEOMETRY_WAIT 3 /* done uploading geometry */ #define MULTIMODE 4 /* set multiple mode */ #define MULTIMODE_WAIT 5 /* done setting multiple mode */ #define READY 6 /* ready for use */ int sc_mode; /* transfer mode */ #define WDM_PIOSINGLE 0 /* single-sector PIO */ #define WDM_PIOMULTI 1 /* multi-sector PIO */ #define WDM_DMA 2 /* DMA */ int sc_multiple; /* multiple for WDM_PIOMULTI */ int sc_flags; /* drive characteistics found */ #define WDF_LOCKED 0x01 #define WDF_WANTED 0x02 #define WDF_WLABEL 0x04 /* label is writable */ #define WDF_LABELLING 0x08 /* writing label */ /* XXX Nothing resets this yet, but disk change sensing will when ATAPI is implemented. */ #define WDF_LOADED 0x10 /* parameters loaded */ #define WDF_32BIT 0x20 /* can do 32-bit transfer */ struct wdparams sc_params; /* ESDI/ATA drive parameters */ daddr_t sc_badsect[127]; /* 126 plus trailing -1 marker */ TAILQ_ENTRY(wd_softc) sc_drivechain; struct buf sc_q; }; struct wdc_softc { struct device sc_dev; void *sc_ih; int sc_iobase; /* I/O port base */ int sc_drq; /* DMA channel */ TAILQ_HEAD(drivehead, wd_softc) sc_drives; int sc_flags; #define WDCF_ACTIVE 0x01 /* controller is active */ #define WDCF_SINGLE 0x02 /* sector at a time mode */ #define WDCF_ERROR 0x04 /* processing a disk error */ #define WDCF_WANTED 0x08 /* XXX locking for wd_get_parms() */ int sc_errors; /* errors during current transfer */ u_char sc_status; /* copy of status register */ u_char sc_error; /* copy of error register */ }; int wdcprobe __P((struct device *, void *, void *)); void wdcattach __P((struct device *, struct device *, void *)); int wdcintr __P((void *)); struct cfattach wdc_ca = { sizeof(struct wdc_softc), wdcprobe, wdcattach }; int wdprobe __P((struct device *, void *, void *)); void wdattach __P((struct device *, struct device *, void *)); int wdprint __P((void *, const char *)); struct cfattach wd_ca = { sizeof(struct wd_softc), wdprobe, wdattach }; extern struct cfdriver wd_cd; dev_type_open(wdopen); dev_type_close(wdclose); dev_type_read(wdread); dev_type_write(wdwrite); dev_type_ioctl(wdioctl); dev_type_strategy(wdstrategy); dev_type_dump(wddump); dev_type_size(wdsize); const struct bdevsw wd_bdevsw = { wdopen, wdclose, wdstrategy, wdioctl, wddump, wdsize, D_DISK }; const struct cdevsw wd_cdevsw = { wdopen, wdclose, wdread, wdwrite, wdioctl, nostop, notty, nopoll, nommap, D_DISK }; void wdgetdisklabel __P((struct wd_softc *)); int wd_get_parms __P((struct wd_softc *)); void wdstart __P((struct wd_softc *)); struct dkdriver wddkdriver = { wdstrategy }; void wdfinish __P((struct wd_softc *, struct buf *)); int dcintr __P((void *)); void wdcstart __P((struct wdc_softc *)); int wdcommand __P((struct wd_softc *, int, int, int, int, int)); int wdcommandshort __P((struct wdc_softc *, int, int)); int wdcontrol __P((struct wd_softc *)); int wdsetctlr __P((struct wd_softc *)); static void bad144intern __P((struct wd_softc *)); int wdcreset __P((struct wdc_softc *)); void wdcrestart __P((void *arg)); void wdcunwedge __P((struct wdc_softc *)); void wdctimeout __P((void *arg)); void wderror __P((void *, struct buf *, char *)); int wdcwait __P((struct wdc_softc *, int)); int wdlock __P((struct wd_softc *)); void wdunlock __P((struct wd_softc *)); /* ST506 spec says that if READY or SEEKCMPLT go off, then the read or write command is aborted. */ #define wait_for_drq(d) wdcwait(d, WDCS_DRDY | WDCS_DSC | WDCS_DRQ) #define wait_for_ready(d) wdcwait(d, WDCS_DRDY | WDCS_DSC) #define wait_for_unbusy(d) wdcwait(d, 0) int wdcprobe(parent, match, aux) struct device *parent; void *match, *aux; { struct wdc_softc *wdc = match; struct isa_attach_args *ia = aux; int iobase; wdc->sc_iobase = iobase = ia->ia_iobase; /* Check if we have registers that work. */ isa_outb(iobase+wd_error, 0x5a); /* Error register not writable, */ isa_outb(iobase+wd_cyl_lo, 0xa5); /* but all of cyllo are. */ if (isa_inb(iobase+wd_error) == 0x5a || isa_inb(iobase+wd_cyl_lo) != 0xa5) return 0; if (wdcreset(wdc) != 0) { delay(500000); if (wdcreset(wdc) != 0) return 0; } /* Select drive 0. */ isa_outb(iobase+wd_sdh, WDSD_IBM | 0); /* Wait for controller to become ready. */ if (wait_for_unbusy(wdc) < 0) return 0; /* Start drive diagnostics. */ isa_outb(iobase+wd_command, WDCC_DIAGNOSE); /* Wait for command to complete. */ if (wait_for_unbusy(wdc) < 0) return 0; ia->ia_iosize = 8; ia->ia_msize = 0; return 1; } struct wdc_attach_args { int wa_drive; }; int wdprint(aux, wdc) void *aux; const char *wdc; { struct wdc_attach_args *wa = aux; if (!wdc) printf(" drive %d", wa->wa_drive); return QUIET; } void wdcattach(parent, self, aux) struct device *parent, *self; void *aux; { struct wdc_softc *wdc = (void *)self; struct isa_attach_args *ia = aux; struct wdc_attach_args wa; TAILQ_INIT(&wdc->sc_drives); wdc->sc_drq = ia->ia_drq; printf("\n"); if (wdc->sc_drq != -1) { if (isa_dmamap_create(parent, wdc->sc_drq, MAXPHYS, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW)) { printf("%s: can't create map for drq %d\n", wdc->sc_dev.dv_xname, wdc->sc_drq); wdc->sc_drq = -1; } } wdc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE, IPL_BIO, wdcintr, wdc); for (wa.wa_drive = 0; wa.wa_drive < 2; wa.wa_drive++) (void)config_found(self, (void *)&wa, wdprint); } int wdprobe(parent, match, aux) struct device *parent; void *match, *aux; { struct wdc_softc *wdc = (void *)parent; struct cfdata *cf = match; struct wdc_attach_args *wa = aux; int drive = wa->wa_drive; if (cf->cf_loc[WDCCF_DRIVE] != WDCCF_DRIVE_DEFAULT && cf->cf_loc[WDCCF_DRIVE] != drive) return 0; if (wdcommandshort(wdc, drive, WDCC_RECAL) != 0 || wait_for_ready(wdc) != 0) return 0; return 1; } void wdattach(parent, self, aux) struct device *parent, *self; void *aux; { struct wd_softc *wd = (void *)self; struct wdc_softc *wdc = (void *)parent; struct wdc_attach_args *wa = aux; int i, blank; char buf[41], c, *p, *q; wd->sc_drive = wa->wa_drive; /* * Initialize and attach the disk structure. */ wd->sc_dk.dk_driver = &wddkdriver; wd->sc_dk.dk_name = wd->sc_dev.dv_xname; disk_attach(&wd->sc_dk); wd_get_parms(wd); for (blank = 0, p = wd->sc_params.wdp_model, q = buf, i = 0; i < sizeof(wd->sc_params.wdp_model); i++) { c = *p++; if (c == '\0') break; if (c != ' ') { if (blank) { *q++ = ' '; blank = 0; } *q++ = c; } else blank = 1; } *q++ = '\0'; printf(": <%s>\n%s: %dMB, %d cyl, %d head, %d sec, %d bytes/sec\n", buf, wd->sc_dev.dv_xname, wd->sc_params.wdp_cylinders * (wd->sc_params.wdp_heads * wd->sc_params.wdp_sectors) / (1048576 / DEV_BSIZE), wd->sc_params.wdp_cylinders, wd->sc_params.wdp_heads, wd->sc_params.wdp_sectors, DEV_BSIZE); if ((wd->sc_params.wdp_capabilities & WD_CAP_DMA) != 0 && wdc->sc_drq != DRQUNK) { wd->sc_mode = WDM_DMA; } else if (wd->sc_params.wdp_maxmulti > 1) { wd->sc_mode = WDM_PIOMULTI; wd->sc_multiple = min(wd->sc_params.wdp_maxmulti, 16); } else { wd->sc_mode = WDM_PIOSINGLE; wd->sc_multiple = 1; } printf("%s: using", wd->sc_dev.dv_xname); if (wd->sc_mode == WDM_DMA) printf(" dma transfers,"); else printf(" %d-sector %d-bit pio transfers,", wd->sc_multiple, (wd->sc_flags & WDF_32BIT) == 0 ? 16 : 32); if ((wd->sc_params.wdp_capabilities & WD_CAP_LBA) != 0) printf(" lba addressing\n"); else printf(" chs addressing\n"); } /* * Read/write routine for a buffer. Validates the arguments and schedules the * transfer. Does not wait for the transfer to complete. */ void wdstrategy(bp) struct buf *bp; { struct wd_softc *wd = wd_cd.cd_devs[WDUNIT(bp->b_dev)]; int s; /* Valid request? */ if (bp->b_blkno < 0 || (bp->b_bcount % wd->sc_dk.dk_label->d_secsize) != 0 || (bp->b_bcount / wd->sc_dk.dk_label->d_secsize) >= (1 << NBBY)) { bp->b_error = EINVAL; goto bad; } /* If device invalidated (e.g. media change, door open), error. */ if ((wd->sc_flags & WDF_LOADED) == 0) { bp->b_error = EIO; goto bad; } /* If it's a null transfer, return immediately. */ if (bp->b_bcount == 0) goto done; /* * Do bounds checking, adjust transfer. if error, process. * If end of partition, just return. */ if (WDPART(bp->b_dev) != RAW_PART && bounds_check_with_label(bp, wd->sc_dk.dk_label, (wd->sc_flags & (WDF_WLABEL|WDF_LABELLING)) != 0) <= 0) goto done; /* Queue transfer on drive, activate drive and controller if idle. */ s = splbio(); disksort(&wd->sc_q, bp); if (!wd->sc_q.b_active) wdstart(wd); #if 0 else { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; if ((wdc->sc_flags & (WDCF_ACTIVE|WDCF_ERROR)) == 0) { printf("wdstrategy: controller inactive\n"); wdcstart(wdc); } } #endif splx(s); return; bad: bp->b_flags |= B_ERROR; done: /* Toss transfer; we're done early. */ bp->b_resid = bp->b_bcount; biodone(bp); } /* * Queue a drive for I/O. */ void wdstart(wd) struct wd_softc *wd; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; int active = wdc->sc_drives.tqh_first != 0; /* Link onto controller queue. */ wd->sc_q.b_active = 1; TAILQ_INSERT_TAIL(&wdc->sc_drives, wd, sc_drivechain); disk_busy(&wd->sc_dk); /* If controller not already active, start it. */ if (!active) wdcstart(wdc); } /* * Finish an I/O operation. Clean up the drive and controller state, set the * residual count, and inform the upper layers that the operation is complete. */ void wdfinish(wd, bp) struct wd_softc *wd; struct buf *bp; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; wdc->sc_flags &= ~(WDCF_SINGLE | WDCF_ERROR); wdc->sc_errors = 0; /* * Move this drive to the end of the queue to give others a `fair' * chance. */ if (wd->sc_drivechain.tqe_next) { TAILQ_REMOVE(&wdc->sc_drives, wd, sc_drivechain); if (bp->b_actf) { TAILQ_INSERT_TAIL(&wdc->sc_drives, wd, sc_drivechain); } else wd->sc_q.b_active = 0; } bp->b_resid = wd->sc_bcount; wd->sc_skip = 0; wd->sc_q.b_actf = bp->b_actf; disk_unbusy(&wd->sc_dk, (bp->b_bcount - bp->b_resid)); if (!wd->sc_q.b_actf) { TAILQ_REMOVE(&wdc->sc_drives, wd, sc_drivechain); wd->sc_q.b_active = 0; } else disk_busy(&wd->sc_dk); biodone(bp); } int wdread(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { return (physio(wdstrategy, NULL, dev, B_READ, minphys, uio)); } int wdwrite(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { return (physio(wdstrategy, NULL, dev, B_WRITE, minphys, uio)); } /* * Start I/O on a controller. This does the calculation, and starts a read or * write operation. Called to from wdstart() to start a transfer, from * wdcintr() to continue a multi-sector transfer or start the next transfer, or * wdcrestart() after recovering from an error. */ void wdcstart(wdc) struct wdc_softc *wdc; { struct wd_softc *wd; struct buf *bp; struct disklabel *lp; int nblks; #ifdef DIAGNOSTIC if ((wdc->sc_flags & WDCF_ACTIVE) != 0) panic("wdcstart: controller still active"); #endif loop: /* Is there a drive for the controller to do a transfer with? */ wd = wdc->sc_drives.tqh_first; if (wd == NULL) { /* * XXX * This is a kluge. See comments in wd_get_parms(). */ if ((wdc->sc_flags & WDCF_WANTED) != 0) { wdc->sc_flags &= ~WDCF_WANTED; wakeup(wdc); } return; } /* Is there a transfer to this drive? If not, deactivate drive. */ bp = wd->sc_q.b_actf; if (wdc->sc_errors >= WDIORETRIES) { wderror(wd, bp, "wdcstart hard error"); bp->b_error = EIO; bp->b_flags |= B_ERROR; wdfinish(wd, bp); goto loop; } /* Do control operations specially. */ if (wd->sc_state < READY) { /* * Actually, we want to be careful not to mess with the control * state if the device is currently busy, but we can assume * that we never get to this point if that's the case. */ if (wdcontrol(wd) == 0) { /* The drive is busy. Wait. */ return; } } /* * WDCF_ERROR is set by wdcunwedge() and wdcintr() when an error is * encountered. If we are in multi-sector mode, then we switch to * single-sector mode and retry the operation from the start. */ if (wdc->sc_flags & WDCF_ERROR) { wdc->sc_flags &= ~WDCF_ERROR; if ((wdc->sc_flags & WDCF_SINGLE) == 0) { wdc->sc_flags |= WDCF_SINGLE; wd->sc_skip = 0; } } lp = wd->sc_dk.dk_label; /* When starting a transfer... */ if (wd->sc_skip == 0) { int part = WDPART(bp->b_dev); daddr_t blkno; #ifdef WDDEBUG printf("\n%s: wdcstart %s %ld@%d; map ", wd->sc_dev.dv_xname, (bp->b_flags & B_READ) ? "read" : "write", bp->b_bcount, bp->b_blkno); #endif wd->sc_bcount = bp->b_bcount; blkno = bp->b_blkno; if (part != RAW_PART) blkno += lp->d_partitions[part].p_offset; wd->sc_blkno = blkno / (lp->d_secsize / DEV_BSIZE); } else { #ifdef WDDEBUG printf(" %d)%x", wd->sc_skip, isa_inb(wdc->sc_iobase+wd_altsts)); #endif } /* When starting a multi-sector transfer, or doing single-sector transfers... */ if (wd->sc_skip == 0 || (wdc->sc_flags & WDCF_SINGLE) != 0 || wd->sc_mode == WDM_DMA) { daddr_t blkno = wd->sc_blkno; long cylin, head, sector; int command; if ((wdc->sc_flags & WDCF_SINGLE) != 0) nblks = 1; else if (wd->sc_mode != WDM_DMA) nblks = wd->sc_bcount / lp->d_secsize; else nblks = min(wd->sc_bcount / lp->d_secsize, 8); /* Check for bad sectors and adjust transfer, if necessary. */ if ((lp->d_flags & D_BADSECT) != 0 #ifdef B_FORMAT && (bp->b_flags & B_FORMAT) == 0 #endif ) { long blkdiff; int i; for (i = 0; (blkdiff = wd->sc_badsect[i]) != -1; i++) { blkdiff -= blkno; if (blkdiff < 0) continue; if (blkdiff == 0) { /* Replace current block of transfer. */ blkno = lp->d_secperunit - lp->d_nsectors - i - 1; } if (blkdiff < nblks) { /* Bad block inside transfer. */ wdc->sc_flags |= WDCF_SINGLE; nblks = 1; } break; } /* Tranfer is okay now. */ } if ((wd->sc_params.wdp_capabilities & WD_CAP_LBA) != 0) { sector = (blkno >> 0) & 0xff; cylin = (blkno >> 8) & 0xffff; head = (blkno >> 24) & 0xf; head |= WDSD_LBA; } else { sector = blkno % lp->d_nsectors; sector++; /* Sectors begin with 1, not 0. */ blkno /= lp->d_nsectors; head = blkno % lp->d_ntracks; blkno /= lp->d_ntracks; cylin = blkno; head |= WDSD_CHS; } if (wd->sc_mode == WDM_PIOSINGLE || (wdc->sc_flags & WDCF_SINGLE) != 0) wd->sc_nblks = 1; else if (wd->sc_mode == WDM_PIOMULTI) wd->sc_nblks = min(nblks, wd->sc_multiple); else wd->sc_nblks = nblks; wd->sc_nbytes = wd->sc_nblks * lp->d_secsize; #ifdef B_FORMAT if (bp->b_flags & B_FORMAT) { sector = lp->d_gap3; nblks = lp->d_nsectors; command = WDCC_FORMAT; } else #endif switch (wd->sc_mode) { case WDM_DMA: command = (bp->b_flags & B_READ) ? WDCC_READDMA : WDCC_WRITEDMA; /* Start the DMA channel. */ isa_dmastart(wdc->sc_dev.dv_parent, wdc->sc_drq, bp->b_data + wd->sc_skip, wd->sc_nbytes, NULL, bp->b_flags & B_READ ? DMAMODE_READ : DMAMODE_WRITE, BUS_DMA_NOWAIT); break; case WDM_PIOMULTI: command = (bp->b_flags & B_READ) ? WDCC_READMULTI : WDCC_WRITEMULTI; break; case WDM_PIOSINGLE: command = (bp->b_flags & B_READ) ? WDCC_READ : WDCC_WRITE; break; default: #ifdef DIAGNOSTIC panic("bad wd mode"); #endif return; } /* Initiate command! */ if (wdcommand(wd, command, cylin, head, sector, nblks) != 0) { wderror(wd, NULL, "wdcstart: timeout waiting for unbusy"); wdcunwedge(wdc); return; } #ifdef WDDEBUG printf("sector %ld cylin %ld head %ld addr %p sts %x\n", sector, cylin, head, bp->b_data, isa_inb(wdc->sc_iobase+wd_altsts)); #endif } else if (wd->sc_nblks > 1) { /* The number of blocks in the last stretch may be smaller. */ nblks = wd->sc_bcount / lp->d_secsize; if (wd->sc_nblks > nblks) { wd->sc_nblks = nblks; wd->sc_nbytes = wd->sc_bcount; } } /* If this was a write and not using DMA, push the data. */ if (wd->sc_mode != WDM_DMA && (bp->b_flags & (B_READ|B_WRITE)) == B_WRITE) { if (wait_for_drq(wdc) < 0) { wderror(wd, NULL, "wdcstart: timeout waiting for drq"); wdcunwedge(wdc); return; } /* Push out data. */ if ((wd->sc_flags & WDF_32BIT) == 0) bus_space_write_multi_2(BEBOX_BUS_SPACE_IO, wdc->sc_iobase, wd_data, bp->b_data + wd->sc_skip, wd->sc_nbytes >> 1); else bus_space_write_multi_4(BEBOX_BUS_SPACE_IO, wdc->sc_iobase, wd_data, bp->b_data + wd->sc_skip, wd->sc_nbytes >> 2); } wdc->sc_flags |= WDCF_ACTIVE; timeout(wdctimeout, wdc, WAITTIME); } /* * Interrupt routine for the controller. Acknowledge the interrupt, check for * errors on the current operation, mark it done if necessary, and start the * next request. Also check for a partially done transfer, and continue with * the next chunk if so. */ int wdcintr(arg) void *arg; { struct wdc_softc *wdc = arg; struct wd_softc *wd; struct buf *bp; if ((wdc->sc_flags & WDCF_ACTIVE) == 0) { /* Clear the pending interrupt and abort. */ (void) isa_inb(wdc->sc_iobase+wd_status); return 0; } wdc->sc_flags &= ~WDCF_ACTIVE; untimeout(wdctimeout, wdc); wd = wdc->sc_drives.tqh_first; bp = wd->sc_q.b_actf; #ifdef WDDEBUG printf("I%d ", wdc->sc_dev.dv_unit); #endif if (wait_for_unbusy(wdc) < 0) { wderror(wd, NULL, "wdcintr: timeout waiting for unbusy"); wdc->sc_status |= WDCS_ERR; /* XXX */ } /* Is it not a transfer, but a control operation? */ if (wd->sc_state < READY) { if (wdcontrol(wd) == 0) { /* The drive is busy. Wait. */ return 1; } wdcstart(wdc); return 1; } /* Turn off the DMA channel. */ if (wd->sc_mode == WDM_DMA) isa_dmadone(wdc->sc_dev.dv_parent, wdc->sc_drq); /* Have we an error? */ if (wdc->sc_status & WDCS_ERR) { #ifdef WDDEBUG wderror(wd, NULL, "wdcintr"); #endif if ((wdc->sc_flags & WDCF_SINGLE) == 0) { wdc->sc_flags |= WDCF_ERROR; goto restart; } #ifdef B_FORMAT if (bp->b_flags & B_FORMAT) goto bad; #endif if (++wdc->sc_errors < WDIORETRIES) { if (wdc->sc_errors == (WDIORETRIES + 1) / 2) { #if 0 wderror(wd, NULL, "wedgie"); #endif wdcunwedge(wdc); return 1; } goto restart; } wderror(wd, bp, "wdcintr hard error"); #ifdef B_FORMAT bad: #endif bp->b_error = EIO; bp->b_flags |= B_ERROR; goto done; } /* If this was a read and not using DMA, fetch the data. */ if (wd->sc_mode != WDM_DMA && (bp->b_flags & (B_READ|B_WRITE)) == B_READ) { if ((wdc->sc_status & (WDCS_DRDY | WDCS_DSC | WDCS_DRQ)) != (WDCS_DRDY | WDCS_DSC | WDCS_DRQ)) { wderror(wd, NULL, "wdcintr: read intr before drq"); wdcunwedge(wdc); return 1; } /* Pull in data. */ if ((wd->sc_flags & WDF_32BIT) == 0) bus_space_read_multi_2(BEBOX_BUS_SPACE_IO, wdc->sc_iobase, wd_data, bp->b_data + wd->sc_skip, wd->sc_nbytes >> 1); else bus_space_read_multi_4(BEBOX_BUS_SPACE_IO, wdc->sc_iobase, wd_data, bp->b_data + wd->sc_skip, wd->sc_nbytes >> 2); } /* If we encountered any abnormalities, flag it as a soft error. */ if (wdc->sc_errors > 0 || (wdc->sc_status & WDCS_CORR) != 0) { wderror(wd, bp, "soft error (corrected)"); wdc->sc_errors = 0; } /* Adjust pointers for the next block, if any. */ wd->sc_blkno += wd->sc_nblks; wd->sc_skip += wd->sc_nbytes; wd->sc_bcount -= wd->sc_nbytes; /* See if this transfer is complete. */ if (wd->sc_bcount > 0) goto restart; done: /* Done with this transfer, with or without error. */ wdfinish(wd, bp); restart: /* Start the next operation, if any. */ wdcstart(wdc); return 1; } /* * Wait interruptibly for an exclusive lock. * * XXX * Several drivers do this; it should be abstracted and made MP-safe. */ int wdlock(wd) struct wd_softc *wd; { int error; while ((wd->sc_flags & WDF_LOCKED) != 0) { wd->sc_flags |= WDF_WANTED; if ((error = tsleep(wd, PRIBIO | PCATCH, "wdlck", 0)) != 0) return error; } wd->sc_flags |= WDF_LOCKED; return 0; } /* * Unlock and wake up any waiters. */ void wdunlock(wd) struct wd_softc *wd; { wd->sc_flags &= ~WDF_LOCKED; if ((wd->sc_flags & WDF_WANTED) != 0) { wd->sc_flags &= ~WDF_WANTED; wakeup(wd); } } int wdopen(dev, flag, fmt, p) dev_t dev; int flag, fmt; struct proc *p; { struct wd_softc *wd; int unit, part; int error; unit = WDUNIT(dev); if (unit >= wd_cd.cd_ndevs) return ENXIO; wd = wd_cd.cd_devs[unit]; if (wd == NULL) return ENXIO; if ((error = wdlock(wd)) != 0) return error; if (wd->sc_dk.dk_openmask != 0) { /* * If any partition is open, but the disk has been invalidated, * disallow further opens. */ if ((wd->sc_flags & WDF_LOADED) == 0) { error = EIO; goto bad3; } } else { if ((wd->sc_flags & WDF_LOADED) == 0) { wd->sc_flags |= WDF_LOADED; /* Load the physical device parameters. */ if (wd_get_parms(wd) != 0) { error = ENXIO; goto bad2; } /* Load the partition info if not already loaded. */ wdgetdisklabel(wd); } } part = WDPART(dev); /* Check that the partition exists. */ if (part != RAW_PART && (part >= wd->sc_dk.dk_label->d_npartitions || wd->sc_dk.dk_label->d_partitions[part].p_fstype == FS_UNUSED)) { error = ENXIO; goto bad; } /* Insure only one open at a time. */ switch (fmt) { case S_IFCHR: wd->sc_dk.dk_copenmask |= (1 << part); break; case S_IFBLK: wd->sc_dk.dk_bopenmask |= (1 << part); break; } wd->sc_dk.dk_openmask = wd->sc_dk.dk_copenmask | wd->sc_dk.dk_bopenmask; wdunlock(wd); return 0; bad2: wd->sc_flags &= ~WDF_LOADED; bad: if (wd->sc_dk.dk_openmask == 0) { } bad3: wdunlock(wd); return error; } int wdclose(dev, flag, fmt, p) dev_t dev; int flag, fmt; struct proc *p; { struct wd_softc *wd = wd_cd.cd_devs[WDUNIT(dev)]; int part = WDPART(dev); int error; if ((error = wdlock(wd)) != 0) return error; switch (fmt) { case S_IFCHR: wd->sc_dk.dk_copenmask &= ~(1 << part); break; case S_IFBLK: wd->sc_dk.dk_bopenmask &= ~(1 << part); break; } wd->sc_dk.dk_openmask = wd->sc_dk.dk_copenmask | wd->sc_dk.dk_bopenmask; if (wd->sc_dk.dk_openmask == 0) { /* XXXX Must wait for I/O to complete! */ } wdunlock(wd); return 0; } /* * Fabricate a default disk label, and try to read the correct one. */ void wdgetdisklabel(wd) struct wd_softc *wd; { struct disklabel *lp = wd->sc_dk.dk_label; char *errstring; bzero(lp, sizeof(struct disklabel)); bzero(wd->sc_dk.dk_cpulabel, sizeof(struct cpu_disklabel)); lp->d_secsize = DEV_BSIZE; lp->d_ntracks = wd->sc_params.wdp_heads; lp->d_nsectors = wd->sc_params.wdp_sectors; lp->d_ncylinders = wd->sc_params.wdp_cylinders; lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors; #if 0 strncpy(lp->d_typename, "ST506 disk", 16); lp->d_type = DTYPE_ST506; #endif strncpy(lp->d_packname, wd->sc_params.wdp_model, 16); lp->d_secperunit = lp->d_secpercyl * lp->d_ncylinders; lp->d_rpm = 3600; lp->d_interleave = 1; lp->d_flags = 0; lp->d_partitions[RAW_PART].p_offset = 0; lp->d_partitions[RAW_PART].p_size = lp->d_secperunit * (lp->d_secsize / DEV_BSIZE); lp->d_partitions[RAW_PART].p_fstype = FS_UNUSED; lp->d_npartitions = RAW_PART + 1; lp->d_magic = DISKMAGIC; lp->d_magic2 = DISKMAGIC; lp->d_checksum = dkcksum(lp); wd->sc_badsect[0] = -1; if (wd->sc_state > RECAL) wd->sc_state = RECAL; errstring = readdisklabel(MAKEWDDEV(0, wd->sc_dev.dv_unit, RAW_PART), wdstrategy, lp, wd->sc_dk.dk_cpulabel); if (errstring) { /* * This probably happened because the drive's default * geometry doesn't match the DOS geometry. We * assume the DOS geometry is now in the label and try * again. XXX This is a kluge. */ if (wd->sc_state > GEOMETRY) wd->sc_state = GEOMETRY; errstring = readdisklabel(MAKEWDDEV(0, wd->sc_dev.dv_unit, RAW_PART), wdstrategy, lp, wd->sc_dk.dk_cpulabel); } if (errstring) { printf("%s: %s\n", wd->sc_dev.dv_xname, errstring); return; } if (wd->sc_state > GEOMETRY) wd->sc_state = GEOMETRY; if ((lp->d_flags & D_BADSECT) != 0) bad144intern(wd); } /* * Implement operations needed before read/write. * Returns 0 if operation still in progress, 1 if completed. */ int wdcontrol(wd) struct wd_softc *wd; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; switch (wd->sc_state) { case RECAL: /* Set SDH, step rate, do recal. */ if (wdcommandshort(wdc, wd->sc_drive, WDCC_RECAL) != 0) { wderror(wd, NULL, "wdcontrol: recal failed (1)"); goto bad; } wd->sc_state = RECAL_WAIT; break; case RECAL_WAIT: if (wdc->sc_status & WDCS_ERR) { wderror(wd, NULL, "wdcontrol: recal failed (2)"); goto bad; } /* fall through */ case GEOMETRY: if ((wd->sc_params.wdp_capabilities & WD_CAP_LBA) != 0) goto multimode; if (wdsetctlr(wd) != 0) { /* Already printed a message. */ goto bad; } wd->sc_state = GEOMETRY_WAIT; break; case GEOMETRY_WAIT: if (wdc->sc_status & WDCS_ERR) { wderror(wd, NULL, "wdcontrol: geometry failed"); goto bad; } /* fall through */ case MULTIMODE: multimode: if (wd->sc_mode != WDM_PIOMULTI) goto ready; isa_outb(wdc->sc_iobase+wd_seccnt, wd->sc_multiple); if (wdcommandshort(wdc, wd->sc_drive, WDCC_SETMULTI) != 0) { wderror(wd, NULL, "wdcontrol: setmulti failed (1)"); goto bad; } wd->sc_state = MULTIMODE_WAIT; break; case MULTIMODE_WAIT: if (wdc->sc_status & WDCS_ERR) { wderror(wd, NULL, "wdcontrol: setmulti failed (2)"); goto bad; } /* fall through */ case READY: ready: wdc->sc_errors = 0; wd->sc_state = READY; /* * The rest of the initialization can be done by normal means. */ return 1; bad: wdcunwedge(wdc); return 0; } wdc->sc_flags |= WDCF_ACTIVE; timeout(wdctimeout, wdc, WAITTIME); return 0; } /* * Wait for the drive to become ready and send a command. * Return -1 if busy for too long or 0 otherwise. * Assumes interrupts are blocked. */ int wdcommand(wd, command, cylin, head, sector, count) struct wd_softc *wd; int command; int cylin, head, sector, count; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; int iobase = wdc->sc_iobase; int stat; /* Select drive, head, and addressing mode. */ isa_outb(iobase+wd_sdh, WDSD_IBM | (wd->sc_drive << 4) | head); /* Wait for it to become ready to accept a command. */ if (command == WDCC_IDP) stat = wait_for_unbusy(wdc); else stat = wdcwait(wdc, WDCS_DRDY); if (stat < 0) return -1; /* Load parameters. */ if (wd->sc_dk.dk_label->d_type == DTYPE_ST506) isa_outb(iobase+wd_precomp, wd->sc_dk.dk_label->d_precompcyl / 4); else isa_outb(iobase+wd_features, 0); isa_outb(iobase+wd_cyl_lo, cylin); isa_outb(iobase+wd_cyl_hi, cylin >> 8); isa_outb(iobase+wd_sector, sector); isa_outb(iobase+wd_seccnt, count); /* Send command. */ isa_outb(iobase+wd_command, command); return 0; } /* * Simplified version of wdcommand(). */ int wdcommandshort(wdc, drive, command) struct wdc_softc *wdc; int drive; int command; { int iobase = wdc->sc_iobase; /* Select drive. */ isa_outb(iobase+wd_sdh, WDSD_IBM | (drive << 4)); if (wdcwait(wdc, WDCS_DRDY) < 0) return -1; isa_outb(iobase+wd_command, command); return 0; } /* * Tell the drive what geometry to use. */ int wdsetctlr(wd) struct wd_softc *wd; { #ifdef WDDEBUG printf("wd(%d,%d) C%dH%dS%d\n", wd->sc_dev.dv_unit, wd->sc_drive, wd->sc_dk.dk_label->d_ncylinders, wd->sc_dk.dk_label->d_ntracks, wd->sc_dk.dk_label->d_nsectors); #endif if (wdcommand(wd, WDCC_IDP, wd->sc_dk.dk_label->d_ncylinders, wd->sc_dk.dk_label->d_ntracks - 1, 0, wd->sc_dk.dk_label->d_nsectors) != 0) { wderror(wd, NULL, "wdsetctlr: geometry upload failed"); return -1; } return 0; } /* * Get the drive parameters, if ESDI or ATA, or create fake ones for ST506. */ int wd_get_parms(wd) struct wd_softc *wd; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; int i; char tb[DEV_BSIZE]; int s, error; /* * XXX * The locking done here, and the length of time this may keep the rest * of the system suspended, is a kluge. This should be rewritten to * set up a transfer and queue it through wdstart(), but it's called * infrequently enough that this isn't a pressing matter. */ s = splbio(); while ((wdc->sc_flags & WDCF_ACTIVE) != 0) { wdc->sc_flags |= WDCF_WANTED; if ((error = tsleep(wdc, PRIBIO | PCATCH, "wdprm", 0)) != 0) { splx(s); return error; } } if (wdcommandshort(wdc, wd->sc_drive, WDCC_IDENTIFY) != 0 || wait_for_drq(wdc) != 0) { /* * We `know' there's a drive here; just assume it's old. * This geometry is only used to read the MBR and print a * (false) attach message. */ strncpy(wd->sc_dk.dk_label->d_typename, "ST506", sizeof wd->sc_dk.dk_label->d_typename); wd->sc_dk.dk_label->d_type = DTYPE_ST506; strncpy(wd->sc_params.wdp_model, "unknown", sizeof wd->sc_params.wdp_model); wd->sc_params.wdp_config = WD_CFG_FIXED; wd->sc_params.wdp_cylinders = 1024; wd->sc_params.wdp_heads = 8; wd->sc_params.wdp_sectors = 17; wd->sc_params.wdp_maxmulti = 0; wd->sc_params.wdp_usedmovsd = 0; wd->sc_params.wdp_capabilities = 0; } else { strncpy(wd->sc_dk.dk_label->d_typename, "ESDI/IDE", sizeof wd->sc_dk.dk_label->d_typename); wd->sc_dk.dk_label->d_type = DTYPE_ESDI; /* Read in parameter block. */ bus_space_read_multi_2(BEBOX_BUS_SPACE_IO, wdc->sc_iobase, wd_data, tb, sizeof(tb) / sizeof(short)); bcopy(tb, &wd->sc_params, sizeof(struct wdparams)); /* Shuffle string byte order. */ for (i = 0; i < sizeof(wd->sc_params.wdp_model); i += 2) { u_short *p; p = (u_short *)(wd->sc_params.wdp_model + i); *p = ntohs(*p); } } /* Clear any leftover interrupt. */ (void) isa_inb(wdc->sc_iobase+wd_status); /* Restart the queue. */ wdcstart(wdc); splx(s); return 0; } int wdioctl(dev, cmd, addr, flag, p) dev_t dev; u_long cmd; caddr_t addr; int flag; struct proc *p; { struct wd_softc *wd = wd_cd.cd_devs[WDUNIT(dev)]; int error; if ((wd->sc_flags & WDF_LOADED) == 0) return EIO; switch (cmd) { case DIOCSBAD: if ((flag & FWRITE) == 0) return EBADF; wd->sc_dk.dk_cpulabel->bad = *(struct dkbad *)addr; wd->sc_dk.dk_label->d_flags |= D_BADSECT; bad144intern(wd); return 0; case DIOCGDINFO: *(struct disklabel *)addr = *(wd->sc_dk.dk_label); return 0; case DIOCGPART: ((struct partinfo *)addr)->disklab = wd->sc_dk.dk_label; ((struct partinfo *)addr)->part = &wd->sc_dk.dk_label->d_partitions[WDPART(dev)]; return 0; case DIOCWDINFO: case DIOCSDINFO: if ((flag & FWRITE) == 0) return EBADF; if ((error = wdlock(wd)) != 0) return error; wd->sc_flags |= WDF_LABELLING; error = setdisklabel(wd->sc_dk.dk_label, (struct disklabel *)addr, /*wd->sc_dk.dk_openmask : */0, wd->sc_dk.dk_cpulabel); if (error == 0) { if (wd->sc_state > GEOMETRY) wd->sc_state = GEOMETRY; if (cmd == DIOCWDINFO) error = writedisklabel(WDLABELDEV(dev), wdstrategy, wd->sc_dk.dk_label, wd->sc_dk.dk_cpulabel); } wd->sc_flags &= ~WDF_LABELLING; wdunlock(wd); return error; case DIOCWLABEL: if ((flag & FWRITE) == 0) return EBADF; if (*(int *)addr) wd->sc_flags |= WDF_WLABEL; else wd->sc_flags &= ~WDF_WLABEL; return 0; #ifdef notyet case DIOCWFORMAT: if ((flag & FWRITE) == 0) return EBADF; { register struct format_op *fop; struct iovec aiov; struct uio auio; fop = (struct format_op *)addr; aiov.iov_base = fop->df_buf; aiov.iov_len = fop->df_count; auio.uio_iov = &aiov; auio.uio_iovcnt = 1; auio.uio_resid = fop->df_count; auio.uio_segflg = 0; auio.uio_offset = fop->df_startblk * wd->sc_dk.dk_label->d_secsize; auio.uio_procp = p; error = physio(wdformat, NULL, dev, B_WRITE, minphys, &auio); fop->df_count -= auio.uio_resid; fop->df_reg[0] = wdc->sc_status; fop->df_reg[1] = wdc->sc_error; return error; } #endif default: return ENOTTY; } #ifdef DIAGNOSTIC panic("wdioctl: impossible"); #endif } #ifdef B_FORMAT int wdformat(struct buf *bp) { bp->b_flags |= B_FORMAT; return wdstrategy(bp); } #endif int wdsize(dev) dev_t dev; { struct wd_softc *wd; int part, unit, omask; int size; unit = WDUNIT(dev); if (unit >= wd_cd.cd_ndevs) return (-1); wd = wd_cd.cd_devs[unit]; if (wd == NULL) return (-1); part = WDPART(dev); omask = wd->sc_dk.dk_openmask & (1 << part); if (omask == 0 && wdopen(dev, 0, S_IFBLK, NULL) != 0) return (-1); if (wd->sc_dk.dk_label->d_partitions[part].p_fstype != FS_SWAP) size = -1; else size = wd->sc_dk.dk_label->d_partitions[part].p_size * (wd->sc_dk.dk_label->d_secsize / DEV_BSIZE); if (omask == 0 && wdclose(dev, 0, S_IFBLK, NULL) != 0) return (-1); return (size); } #ifndef __BDEVSW_DUMP_OLD_TYPE /* #define WD_DUMP_NOT_TRUSTED if you just want to watch */ static int wddoingadump; static int wddumprecalibrated; /* * Dump core after a system crash. */ int wddump(dev, blkno, va, size) dev_t dev; daddr_t blkno; caddr_t va; size_t size; { struct wd_softc *wd; /* disk unit to do the I/O */ struct wdc_softc *wdc; /* disk controller to do the I/O */ struct disklabel *lp; /* disk's disklabel */ int unit, part; int nblks; /* total number of sectors left to write */ /* Check if recursive dump; if so, punt. */ if (wddoingadump) return EFAULT; wddoingadump = 1; unit = WDUNIT(dev); if (unit >= wd_cd.cd_ndevs) return ENXIO; wd = wd_cd.cd_devs[unit]; if (wd == 0) return ENXIO; part = WDPART(dev); /* Make sure it was initialized. */ if (wd->sc_state < READY) return ENXIO; wdc = (void *)wd->sc_dev.dv_parent; /* Convert to disk sectors. Request must be a multiple of size. */ lp = wd->sc_dk.dk_label; if ((size % lp->d_secsize) != 0) return EFAULT; nblks = size / lp->d_secsize; blkno = blkno / (lp->d_secsize / DEV_BSIZE); /* Check transfer bounds against partition size. */ if ((blkno < 0) || ((blkno + nblks) > lp->d_partitions[part].p_size)) return EINVAL; /* Offset block number to start of partition. */ blkno += lp->d_partitions[part].p_offset; /* Recalibrate, if first dump transfer. */ if (wddumprecalibrated == 0) { wddumprecalibrated = 1; if (wdcommandshort(wdc, wd->sc_drive, WDCC_RECAL) != 0 || wait_for_ready(wdc) != 0 || wdsetctlr(wd) != 0 || wait_for_ready(wdc) != 0) { wderror(wd, NULL, "wddump: recal failed"); return EIO; } } while (nblks > 0) { daddr_t xlt_blkno = blkno; long cylin, head, sector; if ((lp->d_flags & D_BADSECT) != 0) { long blkdiff; int i; for (i = 0; (blkdiff = wd->sc_badsect[i]) != -1; i++) { blkdiff -= xlt_blkno; if (blkdiff < 0) continue; if (blkdiff == 0) { /* Replace current block of transfer. */ xlt_blkno = lp->d_secperunit - lp->d_nsectors - i - 1; } break; } /* Tranfer is okay now. */ } if ((wd->sc_params.wdp_capabilities & WD_CAP_LBA) != 0) { sector = (xlt_blkno >> 0) & 0xff; cylin = (xlt_blkno >> 8) & 0xffff; head = (xlt_blkno >> 24) & 0xf; head |= WDSD_LBA; } else { sector = xlt_blkno % lp->d_nsectors; sector++; /* Sectors begin with 1, not 0. */ xlt_blkno /= lp->d_nsectors; head = xlt_blkno % lp->d_ntracks; xlt_blkno /= lp->d_ntracks; cylin = xlt_blkno; head |= WDSD_CHS; } #ifndef WD_DUMP_NOT_TRUSTED if (wdcommand(wd, WDCC_WRITE, cylin, head, sector, 1) != 0 || wait_for_drq(wdc) != 0) { wderror(wd, NULL, "wddump: write failed"); return EIO; } bus_space_write_multi_2(BEBOX_BUS_SPACE_IO, wdc->sc_iobase, wd_data, va, lp->d_secsize >> 1); /* Check data request (should be done). */ if (wait_for_ready(wdc) != 0) { wderror(wd, NULL, "wddump: timeout waiting for ready"); return EIO; } #else /* WD_DUMP_NOT_TRUSTED */ /* Let's just talk about this first... */ printf("wd%d: dump addr 0x%x, cylin %d, head %d, sector %d\n", unit, va, cylin, head, sector); delay(500 * 1000); /* half a second */ #endif /* update block count */ nblks -= 1; blkno += 1; va += lp->d_secsize; } wddoingadump = 0; return 0; } #else /* __BDEVSW_DUMP_NEW_TYPE */ int wddump(dev, blkno, va, size) dev_t dev; daddr_t blkno; caddr_t va; size_t size; { /* Not implemented. */ return ENXIO; } #endif /* __BDEVSW_DUMP_NEW_TYPE */ /* * Internalize the bad sector table. */ void bad144intern(wd) struct wd_softc *wd; { struct dkbad *bt = &wd->sc_dk.dk_cpulabel->bad; struct disklabel *lp = wd->sc_dk.dk_label; int i = 0; for (; i < 126; i++) { if (bt->bt_bad[i].bt_cyl == 0xffff) break; wd->sc_badsect[i] = bt->bt_bad[i].bt_cyl * lp->d_secpercyl + (bt->bt_bad[i].bt_trksec >> 8) * lp->d_nsectors + (bt->bt_bad[i].bt_trksec & 0xff); } for (; i < 127; i++) wd->sc_badsect[i] = -1; } int wdcreset(wdc) struct wdc_softc *wdc; { int iobase = wdc->sc_iobase; /* Reset the device. */ isa_outb(iobase+wd_ctlr, WDCTL_RST | WDCTL_IDS); delay(1000); isa_outb(iobase+wd_ctlr, WDCTL_IDS); delay(1000); (void) isa_inb(iobase+wd_error); isa_outb(iobase+wd_ctlr, WDCTL_4BIT); if (wait_for_unbusy(wdc) < 0) { printf("%s: reset failed\n", wdc->sc_dev.dv_xname); return 1; } return 0; } void wdcrestart(arg) void *arg; { struct wdc_softc *wdc = arg; int s; s = splbio(); wdcstart(wdc); splx(s); } /* * Unwedge the controller after an unexpected error. We do this by resetting * it, marking all drives for recalibration, and stalling the queue for a short * period to give the reset time to finish. * NOTE: We use a timeout here, so this routine must not be called during * autoconfig or dump. */ void wdcunwedge(wdc) struct wdc_softc *wdc; { int unit; untimeout(wdctimeout, wdc); (void) wdcreset(wdc); /* Schedule recalibrate for all drives on this controller. */ for (unit = 0; unit < wd_cd.cd_ndevs; unit++) { struct wd_softc *wd = wd_cd.cd_devs[unit]; if (!wd || (void *)wd->sc_dev.dv_parent != wdc) continue; if (wd->sc_state > RECAL) wd->sc_state = RECAL; } wdc->sc_flags |= WDCF_ERROR; ++wdc->sc_errors; /* Wake up in a little bit and restart the operation. */ timeout(wdcrestart, wdc, RECOVERYTIME); } int wdcwait(wdc, mask) struct wdc_softc *wdc; int mask; { int iobase = wdc->sc_iobase; int timeout = 0; u_char status; #ifdef WDCNDELAY_DEBUG extern int cold; #endif for (;;) { wdc->sc_status = status = isa_inb(iobase+wd_status); if ((status & WDCS_BSY) == 0 && (status & mask) == mask) break; if (++timeout > WDCNDELAY) return -1; delay(WDCDELAY); } if (status & WDCS_ERR) { wdc->sc_error = isa_inb(iobase+wd_error); return WDCS_ERR; } #ifdef WDCNDELAY_DEBUG /* After autoconfig, there should be no long delays. */ if (!cold && timeout > WDCNDELAY_DEBUG) printf("%s: warning: busy-wait took %dus\n", wdc->sc_dev.dv_xname, WDCDELAY * timeout); #endif return 0; } void wdctimeout(arg) void *arg; { struct wdc_softc *wdc = (struct wdc_softc *)arg; int s; s = splbio(); if ((wdc->sc_flags & WDCF_ACTIVE) != 0) { struct wd_softc *wd = wdc->sc_drives.tqh_first; struct buf *bp = wd->sc_q.b_actf; wdc->sc_flags &= ~WDCF_ACTIVE; wderror(wdc, NULL, "lost interrupt"); printf("%s: lost interrupt: %sing %d@%s:%d\n", wdc->sc_dev.dv_xname, (bp->b_flags & B_READ) ? "read" : "writ", wd->sc_nblks, wd->sc_dev.dv_xname, wd->sc_blkno); wdcunwedge(wdc); } else wderror(wdc, NULL, "missing untimeout"); splx(s); } void wderror(dev, bp, msg) void *dev; struct buf *bp; char *msg; { struct wd_softc *wd = dev; struct wdc_softc *wdc = dev; if (bp) { diskerr(bp, "wd", msg, LOG_PRINTF, wd->sc_skip / DEV_BSIZE, wd->sc_dk.dk_label); printf("\n"); } else printf("%s: %s: status %b error %b\n", wdc->sc_dev.dv_xname, msg, wdc->sc_status, WDCS_BITS, wdc->sc_error, WDERR_BITS); }