/* $NetBSD: pas.c,v 1.61 2005/01/14 03:41:45 kent Exp $ */ /* * Copyright (c) 1991-1993 Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the Computer Systems * Engineering Group at Lawrence Berkeley Laboratory. * 4. Neither the name of the University nor of the Laboratory may be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* * jfw 7/13/97 - The soundblaster code requires the generic bus-space * structures to be set up properly. Rather than go to the effort of making * code for a dead line fully generic, properly set up the SB structures and * leave the rest x86/ISA/default-configuration specific. If you have a * REAL computer, go buy a REAL sound card. */ /* * Todo: * - look at other PAS drivers (for PAS native suport) * - use common sb.c once emulation is setup */ /* * jfw 6/21/98 - WARNING: the PAS native IO ports are scattered all around * IO port space (0x0388, 0x738B, 0xBF88, 0x2789, ...) which will make proper * reservation a real pain, so I'm not going to do it (while fixing the * current reservation code to "work"). As a sanity check, I reserve the * 0x0388 base address, but you probably shouldn't even think of trying this * driver unless you're certain you have the hardware installed and it doesn't * conflict with other hardware... */ #include __KERNEL_RCSID(0, "$NetBSD: pas.c,v 1.61 2005/01/14 03:41:45 kent Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define DEFINE_TRANSLATIONS #include #ifdef AUDIO_DEBUG #define DPRINTF(x) if (pasdebug) printf x int pasdebug = 0; #else #define DPRINTF(x) #endif /* * Software state, per SoundBlaster card. * The soundblaster has multiple functionality, which we must demultiplex. * One approach is to have one major device number for the soundblaster card, * and use different minor numbers to indicate which hardware function * we want. This would make for one large driver. Instead our approach * is to partition the design into a set of drivers that share an underlying * piece of hardware. Most things are hard to share, for example, the audio * and midi ports. For audio, we might want to mix two processes' signals, * and for midi we might want to merge streams (this is hard due to * running status). Moreover, we should be able to re-use the high-level * modules with other kinds of hardware. In this module, we only handle the * most basic communications with the sb card. */ struct pas_softc { struct sbdsp_softc sc_sbdsp; /* base device, &c. */ bus_space_handle_t pas_port_handle; /* the pas-specific port */ int model; int rev; }; int pas_getdev(void *, struct audio_device *); void pasconf(int, int, int, int); /* * Define our interface to the higher level audio driver. */ const struct audio_hw_if pas_hw_if = { sbdsp_open, sbdsp_close, 0, sbdsp_query_encoding, sbdsp_set_params, sbdsp_round_blocksize, 0, 0, 0, 0, 0, sbdsp_halt_output, sbdsp_halt_input, sbdsp_speaker_ctl, pas_getdev, 0, sbdsp_mixer_set_port, sbdsp_mixer_get_port, sbdsp_mixer_query_devinfo, sb_malloc, sb_free, sb_round_buffersize, sb_mappage, sbdsp_get_props, sbdsp_trigger_output, sbdsp_trigger_input, 0, }; /* The Address Translation code is used to convert I/O register addresses to be relative to the given base -register */ static const char *pasnames[] = { "", "Plus", "CDPC", "16", "16Basic" }; static struct audio_device pas_device = { "PAS,??", "", "pas" }; /*XXX assume default I/O base address */ #define pasread(p) inb((p)) #define paswrite(d, p) outb((p), (d)) void pasconf(int model, int sbbase, int sbirq, int sbdrq) { paswrite(0x00, INTERRUPT_MASK); /* Local timer control register */ paswrite(0x36, SAMPLE_COUNTER_CONTROL); /* Sample rate timer (16 bit) */ paswrite(0x36, SAMPLE_RATE_TIMER); paswrite(0, SAMPLE_RATE_TIMER); /* Local timer control register */ paswrite(0x74, SAMPLE_COUNTER_CONTROL); /* Sample count register (16 bit) */ paswrite(0x74, SAMPLE_BUFFER_COUNTER); paswrite(0, SAMPLE_BUFFER_COUNTER); paswrite(P_C_PCM_MONO | P_C_PCM_DAC_MODE | P_C_MIXER_CROSS_L_TO_L | P_C_MIXER_CROSS_R_TO_R, PCM_CONTROL); paswrite(S_M_PCM_RESET | S_M_FM_RESET | S_M_SB_RESET | S_M_MIXER_RESET, SERIAL_MIXER); /*XXX*/ paswrite(I_C_1_BOOT_RESET_ENABLE|1, IO_CONFIGURATION_1); paswrite(I_C_2_PCM_DMA_DISABLED, IO_CONFIGURATION_2); paswrite(I_C_3_PCM_IRQ_DISABLED, IO_CONFIGURATION_3); #ifdef BROKEN_BUS_CLOCK paswrite(S_C_1_PCS_ENABLE | S_C_1_PCS_STEREO | S_C_1_PCS_REALSOUND | S_C_1_FM_EMULATE_CLOCK, SYSTEM_CONFIGURATION_1); #else paswrite(S_C_1_PCS_ENABLE | S_C_1_PCS_STEREO | S_C_1_PCS_REALSOUND, SYSTEM_CONFIGURATION_1); #endif /*XXX*/ paswrite(0, SYSTEM_CONFIGURATION_2); paswrite(0, SYSTEM_CONFIGURATION_3); /* Sets mute off and selects filter rate of 17.897 kHz */ paswrite(F_F_MIXER_UNMUTE | 0x01, FILTER_FREQUENCY); if (model == PAS_16 || model == PAS_16BASIC) paswrite(8, PRESCALE_DIVIDER); else paswrite(0, PRESCALE_DIVIDER); paswrite(P_M_MV508_ADDRESS | P_M_MV508_PCM, PARALLEL_MIXER); paswrite(5, PARALLEL_MIXER); /* * Setup SoundBlaster emulation. */ paswrite((sbbase >> 4) & 0xf, EMULATION_ADDRESS); paswrite(E_C_SB_IRQ_translate[sbirq] | E_C_SB_DMA_translate[sbdrq], EMULATION_CONFIGURATION); paswrite(C_E_SB_ENABLE, COMPATIBILITY_ENABLE); /* * Set mid-range levels. */ paswrite(P_M_MV508_ADDRESS | P_M_MV508_MODE, PARALLEL_MIXER); paswrite(P_M_MV508_LOUDNESS | P_M_MV508_ENHANCE_NONE, PARALLEL_MIXER); paswrite(P_M_MV508_ADDRESS | P_M_MV508_MASTER_A, PARALLEL_MIXER); paswrite(50, PARALLEL_MIXER); paswrite(P_M_MV508_ADDRESS | P_M_MV508_MASTER_B, PARALLEL_MIXER); paswrite(50, PARALLEL_MIXER); paswrite(P_M_MV508_ADDRESS | P_M_MV508_MIXER | P_M_MV508_SB, PARALLEL_MIXER); paswrite(P_M_MV508_OUTPUTMIX | 30, PARALLEL_MIXER); paswrite(P_M_MV508_ADDRESS | P_M_MV508_MIXER | P_M_MV508_MIC, PARALLEL_MIXER); paswrite(P_M_MV508_INPUTMIX | 30, PARALLEL_MIXER); } int pasprobe(struct device *, struct cfdata *, void *); void pasattach(struct device *, struct device *, void *); static int pasfind(struct device *, struct pas_softc *, struct isa_attach_args *, int); /* argument to pasfind */ #define PASPROBE 1 #define PASATTACH 0 CFATTACH_DECL(pas, sizeof(struct pas_softc), pasprobe, pasattach, NULL, NULL); /* * Probe / attach routines. */ int pasprobe(struct device *parent, struct cfdata *match, void *aux) { struct isa_attach_args *ia; struct pas_softc probesc, *sc; ia = aux; sc = &probesc; if (ia->ia_nio < 1) return 0; if (ia->ia_nirq < 1) return 0; if (ia->ia_ndrq < 1) return 0; if (ISA_DIRECT_CONFIG(ia)) return 0; memset(sc, 0, sizeof *sc); sc->sc_sbdsp.sc_dev.dv_cfdata = match; strcpy(sc->sc_sbdsp.sc_dev.dv_xname, "pas"); return pasfind(parent, sc, aux, PASPROBE); } /* * Probe for the soundblaster hardware. */ static int pasfind(struct device *parent, struct pas_softc *sc, struct isa_attach_args *ia, int probing) { int iobase; u_char id, t; int rc; rc = 0; /* failure */ /* ensure we can set this up as a sound blaster */ if (!SB_BASE_VALID(ia->ia_io[0].ir_addr)) { printf("pas: configured SB iobase 0x%x invalid\n", ia->ia_io[0].ir_addr); return 0; } if (bus_space_map(sc->sc_sbdsp.sc_iot, PAS_DEFAULT_BASE, 1, 0, &sc->pas_port_handle)) { printf("pas: can't map base register %x in probe\n", PAS_DEFAULT_BASE); return 0; } /* * WARNING: Setting an option like W:1 or so that disables * warm boot reset of the card will screw up this detect code * something fierce. Adding code to handle this means possibly * interfering with other cards on the bus if you have something * on base port 0x388. SO be forewarned. */ /* Talk to first board */ outb(MASTER_DECODE, 0xbc); /* Set base address */ #if 0 /* XXX Need to setup pseudo device */ /* XXX What are good io addrs ? */ if (iobase != PAS_DEFAULT_BASE) { printf("pas: configured iobase %d invalid\n", iobase); return 0; } #else /* Start out talking to native PAS */ iobase = PAS_DEFAULT_BASE; #endif outb(MASTER_DECODE, iobase >> 2); /* One wait-state */ paswrite(1, WAIT_STATE); id = pasread(INTERRUPT_MASK); if (id == 0xff || id == 0xfe) { /* sanity */ DPRINTF(("pas: bogus card id\n")); goto unmap1; } /* * We probably have a PAS-series board, now check for a * PAS2-series board by trying to change the board revision * bits. PAS2-series hardware won't let you do this because * the bits are read-only. */ t = id ^ 0xe0; paswrite(t, INTERRUPT_MASK); t = inb(INTERRUPT_MASK); paswrite(id, INTERRUPT_MASK); if (t != id) { /* Not a PAS2 */ printf("pas: detected card but PAS2 test failed\n"); goto unmap1; } /*XXX*/ t = pasread(OPERATION_MODE_1) & 0xf; sc->model = O_M_1_to_card[t]; if (sc->model != 0) { sc->rev = pasread(BOARD_REV_ID); } else { DPRINTF(("pas: bogus model id\n")); goto unmap1; } if (sc->model >= 0) { if (ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ) { printf("pas: sb emulation requires known irq\n"); goto unmap1; } pasconf(sc->model, ia->ia_io[0].ir_addr, ia->ia_irq[0].ir_irq, 1); } else { DPRINTF(("pas: could not probe pas\n")); goto unmap1; } /* Now a SoundBlaster, so set up proper bus-space hooks * appropriately */ sc->sc_sbdsp.sc_iobase = ia->ia_io[0].ir_addr; sc->sc_sbdsp.sc_iot = ia->ia_iot; /* Map i/o space [we map 24 ports which is the max of the sb and pro */ if (bus_space_map(sc->sc_sbdsp.sc_iot, ia->ia_io[0].ir_addr, SBP_NPORT, 0, &sc->sc_sbdsp.sc_ioh)) { printf("pas: can't map i/o space 0x%x/%d in probe\n", ia->ia_io[0].ir_addr, SBP_NPORT); goto unmap1; } if (sbdsp_reset(&sc->sc_sbdsp) < 0) { DPRINTF(("pas: couldn't reset card\n")); goto unmap; } /* * Cannot auto-discover DMA channel. */ if (!SB_DRQ_VALID(ia->ia_drq[0].ir_drq)) { printf("pas: configured DMA chan %d invalid\n", ia->ia_drq[0].ir_drq); goto unmap; } if (!SB_IRQ_VALID(ia->ia_irq[0].ir_irq)) { printf("pas: configured irq chan %d invalid\n", ia->ia_drq[0].ir_drq); goto unmap; } sc->sc_sbdsp.sc_irq = ia->ia_irq[0].ir_irq; sc->sc_sbdsp.sc_drq8 = ia->ia_drq[0].ir_drq; sc->sc_sbdsp.sc_drq16 = -1; /* XXX */ if (sbdsp_probe(&sc->sc_sbdsp) == 0) { DPRINTF(("pas: sbdsp probe failed\n")); goto unmap; } rc = 1; if (probing) { ia->ia_nio = 1; ia->ia_io[0].ir_size = SBP_NPORT; ia->ia_nirq = 1; ia->ia_ndrq = 1; ia->ia_niomem = 0; } unmap: if (rc == 0 || probing) bus_space_unmap(sc->sc_sbdsp.sc_iot, sc->sc_sbdsp.sc_ioh, SBP_NPORT); unmap1: if (rc == 0 || probing) bus_space_unmap(sc->sc_sbdsp.sc_iot, PAS_DEFAULT_BASE, 1); return rc; } /* * Attach hardware to driver, attach hardware driver to audio * pseudo-device driver . */ void pasattach(struct device *parent, struct device *self, void *aux) { struct pas_softc *sc; struct isa_attach_args *ia; int iobase; sc = (struct pas_softc *)self; ia = (struct isa_attach_args *)aux; iobase = ia->ia_io[0].ir_addr; if (!pasfind(parent, sc, ia, PASATTACH)) { printf("%s: pasfind failed\n", sc->sc_sbdsp.sc_dev.dv_xname); return; } sc->sc_sbdsp.sc_ic = ia->ia_ic; sc->sc_sbdsp.sc_iobase = iobase; sc->sc_sbdsp.sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq[0].ir_irq, IST_EDGE, IPL_AUDIO, sbdsp_intr, &sc->sc_sbdsp); printf(" ProAudio Spectrum %s [rev %d] ", pasnames[sc->model], sc->rev); sbdsp_attach(&sc->sc_sbdsp); snprintf(pas_device.name, sizeof(pas_device.name), "pas,%s", pasnames[sc->model]); snprintf(pas_device.version, sizeof(pas_device.version), "%d", sc->rev); audio_attach_mi(&pas_hw_if, &sc->sc_sbdsp, &sc->sc_sbdsp.sc_dev); } int pas_getdev(void *addr, struct audio_device *retp) { *retp = pas_device; return 0; }