/* $NetBSD: flsc.c,v 1.21 1998/07/04 22:18:16 jonathan Exp $ */ /* * Copyright (c) 1997 Michael L. Hitch * Copyright (c) 1995 Daniel Widenfalk * Copyright (c) 1994 Christian E. Hopps * Copyright (c) 1982, 1990 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Daniel Widenfalk * and Michael L. Hitch. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Initial amiga Fastlane driver by Daniel Widenfalk. Conversion to * 53c9x MI driver by Michael L. Hitch (mhitch@montana.edu). */ #include "opt_ddb.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include void flscattach __P((struct device *, struct device *, void *)); int flscmatch __P((struct device *, struct cfdata *, void *)); /* Linkup to the rest of the kernel */ struct cfattach flsc_ca = { sizeof(struct flsc_softc), flscmatch, flscattach }; struct scsipi_adapter flsc_switch = { ncr53c9x_scsi_cmd, minphys, /* no max at this level; handled by DMA code */ NULL, NULL, }; struct scsipi_device flsc_dev = { NULL, /* Use default error handler */ NULL, /* have a queue, served by this */ NULL, /* have no async handler */ NULL, /* Use default 'done' routine */ }; /* * Functions and the switch for the MI code. */ u_char flsc_read_reg __P((struct ncr53c9x_softc *, int)); void flsc_write_reg __P((struct ncr53c9x_softc *, int, u_char)); int flsc_dma_isintr __P((struct ncr53c9x_softc *)); void flsc_dma_reset __P((struct ncr53c9x_softc *)); int flsc_dma_intr __P((struct ncr53c9x_softc *)); int flsc_dma_setup __P((struct ncr53c9x_softc *, caddr_t *, size_t *, int, size_t *)); void flsc_dma_go __P((struct ncr53c9x_softc *)); void flsc_dma_stop __P((struct ncr53c9x_softc *)); int flsc_dma_isactive __P((struct ncr53c9x_softc *)); void flsc_clear_latched_intr __P((struct ncr53c9x_softc *)); struct ncr53c9x_glue flsc_glue = { flsc_read_reg, flsc_write_reg, flsc_dma_isintr, flsc_dma_reset, flsc_dma_intr, flsc_dma_setup, flsc_dma_go, flsc_dma_stop, flsc_dma_isactive, flsc_clear_latched_intr, }; /* Maximum DMA transfer length to reduce impact on high-speed serial input */ u_long flsc_max_dma = 1024; extern int ser_open_speed; extern int ncr53c9x_debug; extern u_long scsi_nosync; extern int shift_nosync; /* * if we are an Advanced Systems & Software FastlaneZ3 */ int flscmatch(parent, cf, aux) struct device *parent; struct cfdata *cf; void *aux; { struct zbus_args *zap; if (!is_a4000() && !is_a3000()) return(0); zap = aux; if (zap->manid == 0x2140 && zap->prodid == 11 && iszthreepa(zap->pa)) return(1); return(0); } /* * Attach this instance, and then all the sub-devices */ void flscattach(parent, self, aux) struct device *parent, *self; void *aux; { struct flsc_softc *fsc = (void *)self; struct ncr53c9x_softc *sc = &fsc->sc_ncr53c9x; struct zbus_args *zap; /* * Set up the glue for MI code early; we use some of it here. */ sc->sc_glue = &flsc_glue; /* * Save the regs */ zap = aux; fsc->sc_dmabase = (volatile u_char *)zap->va; fsc->sc_reg = &((volatile u_char *)zap->va)[0x1000001]; sc->sc_freq = 40; /* Clocked at 40Mhz */ printf(": address %p", fsc->sc_reg); sc->sc_id = 7; /* * It is necessary to try to load the 2nd config register here, * to find out what rev the flsc chip is, else the flsc_reset * will not set up the defaults correctly. */ sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_FE; sc->sc_cfg3 = 0x08 /*FCLK*/ | NCRESPCFG3_FSCSI | NCRESPCFG3_CDB; sc->sc_rev = NCR_VARIANT_FAS216; /* * This is the value used to start sync negotiations * Note that the NCR register "SYNCTP" is programmed * in "clocks per byte", and has a minimum value of 4. * The SCSI period used in negotiation is one-fourth * of the time (in nanoseconds) needed to transfer one byte. * Since the chip's clock is given in MHz, we have the following * formula: 4 * period = (1000 / freq) * 4 */ sc->sc_minsync = 1000 / sc->sc_freq; if (((scsi_nosync >> shift_nosync) & 0xff00) == 0xff00) sc->sc_minsync = 0; /* Really no limit, but since we want to fit into the TCR... */ sc->sc_maxxfer = 64 * 1024; fsc->sc_portbits = 0xa0 | FLSC_PB_EDI | FLSC_PB_ESI; fsc->sc_hardbits = fsc->sc_reg[0x40]; fsc->sc_alignbuf = (char *)((u_long)fsc->sc_unalignbuf & -4); sc->sc_dev.dv_cfdata->cf_flags |= (scsi_nosync >> shift_nosync) & 0xffff; shift_nosync += 16; ncr53c9x_debug |= (scsi_nosync >> shift_nosync) & 0xffff; shift_nosync += 16; /* * Configure interrupts. */ fsc->sc_isr.isr_intr = (int (*)(void *))ncr53c9x_intr; fsc->sc_isr.isr_arg = sc; fsc->sc_isr.isr_ipl = 2; add_isr(&fsc->sc_isr); fsc->sc_reg[0x40] = fsc->sc_portbits; /* * Now try to attach all the sub-devices */ ncr53c9x_attach(sc, &flsc_switch, &flsc_dev); } /* * Glue functions. */ u_char flsc_read_reg(sc, reg) struct ncr53c9x_softc *sc; int reg; { struct flsc_softc *fsc = (struct flsc_softc *)sc; return fsc->sc_reg[reg * 4]; } void flsc_write_reg(sc, reg, val) struct ncr53c9x_softc *sc; int reg; u_char val; { struct flsc_softc *fsc = (struct flsc_softc *)sc; struct ncr53c9x_tinfo *ti; u_char v = val; if (fsc->sc_piomode && reg == NCR_CMD && v == (NCRCMD_TRANS|NCRCMD_DMA)) { v = NCRCMD_TRANS; } /* * Can't do synchronous transfers in SCSI_POLL mode: * If starting SCSI_POLL command, clear defer sync negotiation * by clearing the T_NEGOTIATE flag. If starting SCSI_POLL and * the device is currently running synchronous, force another * T_NEGOTIATE with 0 offset. */ if (reg == NCR_SELID) { ti = &sc->sc_tinfo[ sc->sc_nexus->xs->sc_link->scsipi_scsi.target]; if (sc->sc_nexus->xs->flags & SCSI_POLL) { if (ti->flags & T_SYNCMODE) { ti->flags ^= T_SYNCMODE | T_NEGOTIATE; } else if (ti->flags & T_NEGOTIATE) { ti->flags ^= T_NEGOTIATE | T_SYNCHOFF; /* save T_NEGOTIATE in private flags? */ } } else { /* * If we haven't attempted sync negotiation yet, * do it now. */ if ((ti->flags & (T_SYNCMODE | T_SYNCHOFF)) == T_SYNCHOFF && sc->sc_minsync != 0) /* XXX */ ti->flags ^= T_NEGOTIATE | T_SYNCHOFF; } } if (reg == NCR_CMD && v == NCRCMD_SETATN && sc->sc_flags & NCR_SYNCHNEGO && sc->sc_nexus->xs->flags & SCSI_POLL) { ti = &sc->sc_tinfo[ sc->sc_nexus->xs->sc_link->scsipi_scsi.target]; ti->offset = 0; } fsc->sc_reg[reg * 4] = v; } int flsc_dma_isintr(sc) struct ncr53c9x_softc *sc; { struct flsc_softc *fsc = (struct flsc_softc *)sc; unsigned hardbits; hardbits = fsc->sc_reg[0x40]; if (hardbits & FLSC_HB_IACT) return (fsc->sc_csr = 0); if (sc->sc_state == NCR_CONNECTED || sc->sc_state == NCR_SELECTING) fsc->sc_portbits |= FLSC_PB_LED; else fsc->sc_portbits &= ~FLSC_PB_LED; if ((hardbits & FLSC_HB_CREQ) && !(hardbits & FLSC_HB_MINT) && fsc->sc_reg[NCR_STAT * 4] & NCRSTAT_INT) { return 1; } /* Do I still need this? */ if (fsc->sc_piomode && fsc->sc_reg[NCR_STAT * 4] & NCRSTAT_INT && !(hardbits & FLSC_HB_MINT)) return 1; fsc->sc_reg[0x40] = fsc->sc_portbits & ~FLSC_PB_INT_BITS; fsc->sc_reg[0x40] = fsc->sc_portbits; return 0; } void flsc_clear_latched_intr(sc) struct ncr53c9x_softc *sc; { struct flsc_softc *fsc = (struct flsc_softc *)sc; fsc->sc_reg[0x40] = fsc->sc_portbits & ~FLSC_PB_INT_BITS; fsc->sc_reg[0x40] = fsc->sc_portbits; } void flsc_dma_reset(sc) struct ncr53c9x_softc *sc; { struct flsc_softc *fsc = (struct flsc_softc *)sc; struct ncr53c9x_tinfo *ti; if (sc->sc_nexus) ti = &sc->sc_tinfo[sc->sc_nexus->xs->sc_link->scsipi_scsi.target]; else ti = &sc->sc_tinfo[1]; /* XXX */ if (fsc->sc_active) { printf("dmaaddr %p dmasize %d stat %x flags %x off %d per %d ff %x", *fsc->sc_dmaaddr, fsc->sc_dmasize, fsc->sc_reg[NCR_STAT * 4], ti->flags, ti->offset, ti->period, fsc->sc_reg[NCR_FFLAG * 4]); printf(" intr %x\n", fsc->sc_reg[NCR_INTR * 4]); #ifdef DDB Debugger(); #endif } fsc->sc_portbits &= ~FLSC_PB_DMA_BITS; fsc->sc_reg[0x40] = fsc->sc_portbits; fsc->sc_reg[0x80] = 0; *((u_long *)fsc->sc_dmabase) = 0; fsc->sc_active = 0; fsc->sc_piomode = 0; } int flsc_dma_intr(sc) struct ncr53c9x_softc *sc; { register struct flsc_softc *fsc = (struct flsc_softc *)sc; register u_char *p; volatile u_char *cmdreg, *intrreg, *statreg, *fiforeg; register u_int flscphase, flscstat, flscintr; register int cnt; NCR_DMA(("flsc_dma_intr: pio %d cnt %d int %x stat %x fifo %d ", fsc->sc_piomode, fsc->sc_dmasize, sc->sc_espintr, sc->sc_espstat, fsc->sc_reg[NCR_FFLAG * 4] & NCRFIFO_FF)); if (!(fsc->sc_reg[0x40] & FLSC_HB_CREQ)) printf("flsc_dma_intr: csr %x stat %x intr %x\n", fsc->sc_csr, sc->sc_espstat, sc->sc_espintr); if (fsc->sc_active == 0) { printf("flsc_intr--inactive DMA\n"); return -1; } /* if DMA transfer, update sc_dmaaddr and sc_pdmalen, else PIO xfer */ if (fsc->sc_piomode == 0) { fsc->sc_portbits &= ~FLSC_PB_DMA_BITS; fsc->sc_reg[0x40] = fsc->sc_portbits; fsc->sc_reg[0x80] = 0; *((u_long *)fsc->sc_dmabase) = 0; cnt = fsc->sc_reg[NCR_TCL * 4]; cnt += fsc->sc_reg[NCR_TCM * 4] << 8; cnt += fsc->sc_reg[NCR_TCH * 4] << 16; if (!fsc->sc_datain) { cnt += fsc->sc_reg[NCR_FFLAG * 4] & NCRFIFO_FF; fsc->sc_reg[NCR_CMD * 4] = NCRCMD_FLUSH; } cnt = fsc->sc_dmasize - cnt; /* number of bytes transferred */ NCR_DMA(("DMA xferred %d\n", cnt)); if (fsc->sc_xfr_align) { int i; for (i = 0; i < cnt; ++i) (*fsc->sc_dmaaddr)[i] = fsc->sc_alignbuf[i]; fsc->sc_xfr_align = 0; } *fsc->sc_dmaaddr += cnt; *fsc->sc_pdmalen -= cnt; fsc->sc_active = 0; return 0; } if ((sc->sc_espintr & NCRINTR_BS) == 0) { fsc->sc_active = 0; fsc->sc_piomode = 0; NCR_DMA(("no NCRINTR_BS\n")); return 0; } cnt = fsc->sc_dmasize; #if 0 if (cnt == 0) { printf("data interrupt, but no count left."); } #endif p = *fsc->sc_dmaaddr; flscphase = sc->sc_phase; flscstat = (u_int) sc->sc_espstat; flscintr = (u_int) sc->sc_espintr; cmdreg = fsc->sc_reg + NCR_CMD * 4; fiforeg = fsc->sc_reg + NCR_FIFO * 4; statreg = fsc->sc_reg + NCR_STAT * 4; intrreg = fsc->sc_reg + NCR_INTR * 4; NCR_DMA(("PIO %d datain %d phase %d stat %x intr %x\n", cnt, fsc->sc_datain, flscphase, flscstat, flscintr)); do { if (fsc->sc_datain) { *p++ = *fiforeg; cnt--; if (flscphase == DATA_IN_PHASE) { *cmdreg = NCRCMD_TRANS; } else { fsc->sc_active = 0; } } else { NCR_DMA(("flsc_dma_intr: PIO out- phase %d cnt %d active %d\n", flscphase, cnt, fsc->sc_active)); if ( (flscphase == DATA_OUT_PHASE) || (flscphase == MESSAGE_OUT_PHASE)) { int n; n = 16 - (fsc->sc_reg[NCR_FFLAG * 4] & NCRFIFO_FF); if (n > cnt) n = cnt; cnt -= n; while (n-- > 0) *fiforeg = *p++; *cmdreg = NCRCMD_TRANS; } else { fsc->sc_active = 0; } } if (fsc->sc_active && cnt) { while (!(*statreg & 0x80)); flscstat = *statreg; flscintr = *intrreg; flscphase = (flscintr & NCRINTR_DIS) ? /* Disconnected */ BUSFREE_PHASE : flscstat & PHASE_MASK; } } while (cnt && fsc->sc_active && (flscintr & NCRINTR_BS)); #if 1 if (fsc->sc_dmasize < 8 && cnt) printf("flsc_dma_intr: short transfer: dmasize %d cnt %d\n", fsc->sc_dmasize, cnt); #endif NCR_DMA(("flsc_dma_intr: PIO transfer [%d], %d->%d phase %d stat %x intr %x\n", *fsc->sc_pdmalen, fsc->sc_dmasize, cnt, flscphase, flscstat, flscintr)); sc->sc_phase = flscphase; sc->sc_espstat = (u_char) flscstat; sc->sc_espintr = (u_char) flscintr; *fsc->sc_dmaaddr = p; *fsc->sc_pdmalen -= fsc->sc_dmasize - cnt; fsc->sc_dmasize = cnt; if (*fsc->sc_pdmalen == 0) { sc->sc_espstat |= NCRSTAT_TC; fsc->sc_piomode = 0; } return 0; } int flsc_dma_setup(sc, addr, len, datain, dmasize) struct ncr53c9x_softc *sc; caddr_t *addr; size_t *len; int datain; size_t *dmasize; { struct flsc_softc *fsc = (struct flsc_softc *)sc; vm_offset_t pa; u_char *ptr; size_t xfer; fsc->sc_dmaaddr = addr; fsc->sc_pdmalen = len; fsc->sc_datain = datain; fsc->sc_dmasize = *dmasize; if (sc->sc_nexus->xs->flags & SCSI_POLL) { /* polling mode, use PIO */ *dmasize = fsc->sc_dmasize; NCR_DMA(("pfsc_dma_setup: PIO %p/%d [%d]\n", *addr, fsc->sc_dmasize, *len)); fsc->sc_piomode = 1; if (datain == 0) { int n; n = fsc->sc_dmasize; if (n > 16) n = 16; while (n-- > 0) { fsc->sc_reg[NCR_FIFO * 4] = **fsc->sc_dmaaddr; (*fsc->sc_pdmalen)--; (*fsc->sc_dmaaddr)++; --fsc->sc_dmasize; } } return 0; } /* * DMA can be nasty for high-speed serial input, so limit the * size of this DMA operation if the serial port is running at * a high speed (higher than 19200 for now - should be adjusted * based on cpu type and speed?). * XXX - add serial speed check XXX */ if (ser_open_speed > 19200 && flsc_max_dma != 0 && fsc->sc_dmasize > flsc_max_dma) fsc->sc_dmasize = flsc_max_dma; ptr = *addr; /* Kernel virtual address */ pa = kvtop(ptr); /* Physical address of DMA */ xfer = min(fsc->sc_dmasize, NBPG - (pa & (NBPG - 1))); fsc->sc_xfr_align = 0; fsc->sc_piomode = 0; fsc->sc_portbits &= ~FLSC_PB_DMA_BITS; fsc->sc_reg[0x40] = fsc->sc_portbits; fsc->sc_reg[0x80] = 0; *((u_long *)fsc->sc_dmabase) = 0; /* * If output and length < 16, copy to fifo */ if (datain == 0 && fsc->sc_dmasize < 16) { int n; for (n = 0; n < fsc->sc_dmasize; ++n) fsc->sc_reg[NCR_FIFO * 4] = *ptr++; NCR_DMA(("flsc_dma_setup: %d bytes written to fifo\n", n)); fsc->sc_piomode = 1; fsc->sc_active = 1; *fsc->sc_pdmalen -= fsc->sc_dmasize; *fsc->sc_dmaaddr += fsc->sc_dmasize; *dmasize = fsc->sc_dmasize; fsc->sc_dmasize = 0; return 0; /* All done */ } /* * If output and unaligned, copy unaligned data to fifo */ else if (datain == 0 && (int)ptr & 3) { int n = 4 - ((int)ptr & 3); NCR_DMA(("flsc_dma_setup: align %d bytes written to fifo\n", n)); pa += n; xfer -= n; while (n--) fsc->sc_reg[NCR_FIFO * 4] = *ptr++; } /* * If unaligned address, read unaligned bytes into alignment buffer */ else if ((int)ptr & 3 || xfer & 3) { pa = kvtop((caddr_t)fsc->sc_alignbuf); xfer = fsc->sc_dmasize = min(xfer, sizeof (fsc->sc_unalignbuf)); NCR_DMA(("flsc_dma_setup: align read by %d bytes\n", xfer)); fsc->sc_xfr_align = 1; } /* * If length smaller than longword, read into alignment buffer * XXX doesn't work for 1 or 2 bytes !!!! */ else if (fsc->sc_dmasize < 4) { NCR_DMA(("flsc_dma_setup: read remaining %d bytes\n", fsc->sc_dmasize)); pa = kvtop((caddr_t)fsc->sc_alignbuf); fsc->sc_xfr_align = 1; } /* * Finally, limit transfer length to multiple of 4 bytes. */ else { fsc->sc_dmasize &= -4; xfer &= -4; } while (xfer < fsc->sc_dmasize) { if ((pa + xfer) != kvtop(*addr + xfer)) break; if ((fsc->sc_dmasize - xfer) < NBPG) xfer = fsc->sc_dmasize; else xfer += NBPG; } fsc->sc_dmasize = xfer; *dmasize = fsc->sc_dmasize; fsc->sc_pa = pa; #if defined(M68040) || defined(M68060) if (mmutype == MMU_68040) { if (fsc->sc_xfr_align) { int n; for (n = 0; n < sizeof (fsc->sc_unalignbuf); ++n) fsc->sc_alignbuf[n] = n | 0x80; dma_cachectl(fsc->sc_alignbuf, sizeof(fsc->sc_unalignbuf)); } else dma_cachectl(*fsc->sc_dmaaddr, fsc->sc_dmasize); } #endif fsc->sc_reg[0x80] = 0; *((u_long *)(fsc->sc_dmabase + (pa & 0x00fffffc))) = pa; fsc->sc_portbits &= ~FLSC_PB_DMA_BITS; fsc->sc_portbits |= FLSC_PB_ENABLE_DMA | (fsc->sc_datain ? FLSC_PB_DMA_READ : FLSC_PB_DMA_WRITE); fsc->sc_reg[0x40] = fsc->sc_portbits; NCR_DMA(("flsc_dma_setup: DMA %p->%lx/%d [%d]\n", ptr, pa, fsc->sc_dmasize, *len)); fsc->sc_active = 1; return 0; } void flsc_dma_go(sc) struct ncr53c9x_softc *sc; { struct flsc_softc *fsc = (struct flsc_softc *)sc; NCR_DMA(("flsc_dma_go: datain %d size %d\n", fsc->sc_datain, fsc->sc_dmasize)); if (sc->sc_nexus->xs->flags & SCSI_POLL) { fsc->sc_active = 1; return; } else if (fsc->sc_piomode == 0) { fsc->sc_portbits &= ~FLSC_PB_DMA_BITS; fsc->sc_portbits |= FLSC_PB_ENABLE_DMA | (fsc->sc_datain ? FLSC_PB_DMA_READ : FLSC_PB_DMA_WRITE); fsc->sc_reg[0x40] = fsc->sc_portbits; } } void flsc_dma_stop(sc) struct ncr53c9x_softc *sc; { struct flsc_softc *fsc = (struct flsc_softc *)sc; fsc->sc_portbits &= ~FLSC_PB_DMA_BITS; fsc->sc_reg[0x40] = fsc->sc_portbits; fsc->sc_reg[0x80] = 0; *((u_long *)fsc->sc_dmabase) = 0; fsc->sc_piomode = 0; } int flsc_dma_isactive(sc) struct ncr53c9x_softc *sc; { struct flsc_softc *fsc = (struct flsc_softc *)sc; return fsc->sc_active; }