/* $NetBSD: esp_obio.c,v 1.5 2000/01/11 12:59:45 pk Exp $ */ /*- * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace * Simulation Facility, NASA Ames Research Center; Paul Kranenburg. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct esp_softc { struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */ bus_space_tag_t sc_bustag; bus_dma_tag_t sc_dmatag; bus_space_handle_t sc_reg; /* the registers */ struct lsi64854_softc *sc_dma; /* pointer to my dma */ }; void espattach_obio __P((struct device *, struct device *, void *)); int espmatch_obio __P((struct device *, struct cfdata *, void *)); /* Linkup to the rest of the kernel */ struct cfattach esp_obio_ca = { sizeof(struct esp_softc), espmatch_obio, espattach_obio }; static struct scsipi_device esp_obio_dev = { NULL, /* Use default error handler */ NULL, /* have a queue, served by this */ NULL, /* have no async handler */ NULL, /* Use default 'done' routine */ }; /* * Functions and the switch for the MI code. */ static u_char esp_read_reg __P((struct ncr53c9x_softc *, int)); static void esp_write_reg __P((struct ncr53c9x_softc *, int, u_char)); static int esp_dma_isintr __P((struct ncr53c9x_softc *)); static void esp_dma_reset __P((struct ncr53c9x_softc *)); static int esp_dma_intr __P((struct ncr53c9x_softc *)); static int esp_dma_setup __P((struct ncr53c9x_softc *, caddr_t *, size_t *, int, size_t *)); static void esp_dma_go __P((struct ncr53c9x_softc *)); static void esp_dma_stop __P((struct ncr53c9x_softc *)); static int esp_dma_isactive __P((struct ncr53c9x_softc *)); static struct ncr53c9x_glue esp_obio_glue = { esp_read_reg, esp_write_reg, esp_dma_isintr, esp_dma_reset, esp_dma_intr, esp_dma_setup, esp_dma_go, esp_dma_stop, esp_dma_isactive, NULL, /* gl_clear_latched_intr */ }; int espmatch_obio(parent, cf, aux) struct device *parent; struct cfdata *cf; void *aux; { union obio_attach_args *uoba = aux; struct obio4_attach_args *oba; if (uoba->uoba_isobio4 == 0) return (0); oba = &uoba->uoba_oba4; return (bus_space_probe(oba->oba_bustag, 0, oba->oba_paddr, 1, /* probe size */ 0, /* offset */ 0, /* flags */ NULL, NULL)); } void espattach_obio(parent, self, aux) struct device *parent, *self; void *aux; { union obio_attach_args *uoba = aux; struct obio4_attach_args *oba = &uoba->uoba_oba4; struct esp_softc *esc = (void *)self; struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x; esc->sc_bustag = oba->oba_bustag; esc->sc_dmatag = oba->oba_dmatag; sc->sc_id = 7; sc->sc_freq = 24000000; /* * Find the DMA by poking around the dma device structures */ esc->sc_dma = (struct lsi64854_softc *) getdevunit("dma", sc->sc_dev.dv_unit); /* * and a back pointer to us, for DMA */ if (esc->sc_dma) esc->sc_dma->sc_client = sc; else { printf("\n"); panic("espattach: no dma found"); } if (obio_bus_map(oba->oba_bustag, oba->oba_paddr, 0, /* offset */ 16, /* size (of ncr53c9xreg) */ BUS_SPACE_MAP_LINEAR, 0, &esc->sc_reg) != 0) { printf("%s @ obio: cannot map registers\n", self->dv_xname); return; } /* * Set up glue for MI code early; we use some of it here. */ sc->sc_glue = &esp_obio_glue; /* gimme Mhz */ sc->sc_freq /= 1000000; /* * XXX More of this should be in ncr53c9x_attach(), but * XXX should we really poke around the chip that much in * XXX the MI code? Think about this more... */ /* * It is necessary to try to load the 2nd config register here, * to find out what rev the esp chip is, else the ncr53c9x_reset * will not set up the defaults correctly. */ sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_RPE; sc->sc_cfg3 = NCRCFG3_CDB; NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2); if ((NCR_READ_REG(sc, NCR_CFG2) & ~NCRCFG2_RSVD) != (NCRCFG2_SCSI2 | NCRCFG2_RPE)) { sc->sc_rev = NCR_VARIANT_ESP100; } else { sc->sc_cfg2 = NCRCFG2_SCSI2; NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2); sc->sc_cfg3 = 0; NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); sc->sc_cfg3 = (NCRCFG3_CDB | NCRCFG3_FCLK); NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); if (NCR_READ_REG(sc, NCR_CFG3) != (NCRCFG3_CDB | NCRCFG3_FCLK)) { sc->sc_rev = NCR_VARIANT_ESP100A; } else { /* NCRCFG2_FE enables > 64K transfers */ sc->sc_cfg2 |= NCRCFG2_FE; sc->sc_cfg3 = 0; NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); sc->sc_rev = NCR_VARIANT_ESP200; } } /* * XXX minsync and maxxfer _should_ be set up in MI code, * XXX but it appears to have some dependency on what sort * XXX of DMA we're hooked up to, etc. */ /* * This is the value used to start sync negotiations * Note that the NCR register "SYNCTP" is programmed * in "clocks per byte", and has a minimum value of 4. * The SCSI period used in negotiation is one-fourth * of the time (in nanoseconds) needed to transfer one byte. * Since the chip's clock is given in MHz, we have the following * formula: 4 * period = (1000 / freq) * 4 */ sc->sc_minsync = 1000 / sc->sc_freq; /* * Alas, we must now modify the value a bit, because it's * only valid when can switch on FASTCLK and FASTSCSI bits * in config register 3... */ switch (sc->sc_rev) { case NCR_VARIANT_ESP100: sc->sc_maxxfer = 64 * 1024; sc->sc_minsync = 0; /* No synch on old chip? */ break; case NCR_VARIANT_ESP100A: sc->sc_maxxfer = 64 * 1024; /* Min clocks/byte is 5 */ sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5); break; case NCR_VARIANT_ESP200: sc->sc_maxxfer = 16 * 1024 * 1024; /* XXX - do actually set FAST* bits */ break; } /* Establish interrupt channel */ bus_intr_establish(esc->sc_bustag, oba->oba_pri, 0, (int(*)__P((void*)))ncr53c9x_intr, sc); /* register interrupt stats */ evcnt_attach(&sc->sc_dev, "intr", &sc->sc_intrcnt); /* Do the common parts of attachment. */ sc->sc_adapter.scsipi_cmd = ncr53c9x_scsi_cmd; sc->sc_adapter.scsipi_minphys = minphys; ncr53c9x_attach(sc, &esp_obio_dev); /* Turn on target selection using the `dma' method */ ncr53c9x_dmaselect = 1; } /* * Glue functions. */ u_char esp_read_reg(sc, reg) struct ncr53c9x_softc *sc; int reg; { struct esp_softc *esc = (struct esp_softc *)sc; return (bus_space_read_1(esc->sc_bustag, esc->sc_reg, reg * 4)); } void esp_write_reg(sc, reg, v) struct ncr53c9x_softc *sc; int reg; u_char v; { struct esp_softc *esc = (struct esp_softc *)sc; bus_space_write_1(esc->sc_bustag, esc->sc_reg, reg * 4, v); } int esp_dma_isintr(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; return (DMA_ISINTR(esc->sc_dma)); } void esp_dma_reset(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; DMA_RESET(esc->sc_dma); } int esp_dma_intr(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; return (DMA_INTR(esc->sc_dma)); } int esp_dma_setup(sc, addr, len, datain, dmasize) struct ncr53c9x_softc *sc; caddr_t *addr; size_t *len; int datain; size_t *dmasize; { struct esp_softc *esc = (struct esp_softc *)sc; return (DMA_SETUP(esc->sc_dma, addr, len, datain, dmasize)); } void esp_dma_go(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; DMA_GO(esc->sc_dma); } void esp_dma_stop(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; u_int32_t csr; csr = L64854_GCSR(esc->sc_dma); csr &= ~D_EN_DMA; L64854_SCSR(esc->sc_dma, csr); } int esp_dma_isactive(sc) struct ncr53c9x_softc *sc; { struct esp_softc *esc = (struct esp_softc *)sc; return (DMA_ISACTIVE(esc->sc_dma)); }