/* $NetBSD: udp6_output.c,v 1.6 2001/12/18 03:04:05 itojun Exp $ */ /* $KAME: udp6_output.c,v 1.43 2001/10/15 09:19:52 itojun Exp $ */ /* * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the project nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1982, 1986, 1989, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)udp_var.h 8.1 (Berkeley) 6/10/93 */ #include __KERNEL_RCSID(0, "$NetBSD: udp6_output.c,v 1.6 2001/12/18 03:04:05 itojun Exp $"); #include "opt_ipsec.h" #include "opt_inet.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IPSEC #include #endif /* IPSEC */ #include "faith.h" #include /* * UDP protocol inplementation. * Per RFC 768, August, 1980. */ int udp6_output(in6p, m, addr6, control, p) struct in6pcb *in6p; struct mbuf *m; struct mbuf *addr6, *control; struct proc *p; { u_int32_t ulen = m->m_pkthdr.len; u_int32_t plen = sizeof(struct udphdr) + ulen; struct ip6_hdr *ip6; struct udphdr *udp6; struct in6_addr *laddr, *faddr; struct in6_addr laddr_mapped; /* XXX ugly */ u_short fport; int error = 0; struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts; int priv; int af = AF_INET6, hlen = sizeof(struct ip6_hdr); #ifdef INET struct ip *ip; struct udpiphdr *ui; #endif int flags = 0; struct sockaddr_in6 tmp; priv = 0; if (p && !suser(p->p_ucred, &p->p_acflag)) priv = 1; if (control) { if ((error = ip6_setpktoptions(control, &opt, priv)) != 0) goto release; in6p->in6p_outputopts = &opt; } if (addr6) { /* * IPv4 version of udp_output calls in_pcbconnect in this case, * which needs splnet and affects performance. * Since we saw no essential reason for calling in_pcbconnect, * we get rid of such kind of logic, and call in6_selectsrc * and in6_pcbsetport in order to fill in the local address * and the local port. */ struct sockaddr_in6 *sin6 = mtod(addr6, struct sockaddr_in6 *); if (addr6->m_len != sizeof(*sin6)) { error = EINVAL; goto release; } if (sin6->sin6_family != AF_INET6) { error = EAFNOSUPPORT; goto release; } if (sin6->sin6_port == 0) { error = EADDRNOTAVAIL; goto release; } if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) { /* how about ::ffff:0.0.0.0 case? */ error = EISCONN; goto release; } /* protect *sin6 from overwrites */ tmp = *sin6; sin6 = &tmp; faddr = &sin6->sin6_addr; fport = sin6->sin6_port; /* allow 0 port */ if (IN6_IS_ADDR_V4MAPPED(faddr)) { if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) { /* * I believe we should explicitly discard the * packet when mapped addresses are disabled, * rather than send the packet as an IPv6 one. * If we chose the latter approach, the packet * might be sent out on the wire based on the * default route, the situation which we'd * probably want to avoid. * (20010421 jinmei@kame.net) */ error = EINVAL; goto release; } if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr) && !IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr)) { /* * when remote addr is an IPv4-mapped address, * local addr should not be an IPv6 address, * since you cannot determine how to map IPv6 * source address to IPv4. */ error = EINVAL; goto release; } af = AF_INET; } /* KAME hack: embed scopeid */ if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) { error = EINVAL; goto release; } if (!IN6_IS_ADDR_V4MAPPED(faddr)) { laddr = in6_selectsrc(sin6, in6p->in6p_outputopts, in6p->in6p_moptions, &in6p->in6p_route, &in6p->in6p_laddr, &error); } else { /* * XXX: freebsd[34] does not have in_selectsrc, but * we can omit the whole part because freebsd4 calls * udp_output() directly in this case, and thus we'll * never see this path. */ if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr)) { struct sockaddr_in *sinp, sin_dst; bzero(&sin_dst, sizeof(sin_dst)); sin_dst.sin_family = AF_INET; sin_dst.sin_len = sizeof(sin_dst); bcopy(&faddr->s6_addr[12], &sin_dst.sin_addr, sizeof(sin_dst.sin_addr)); sinp = in_selectsrc(&sin_dst, (struct route *)&in6p->in6p_route, in6p->in6p_socket->so_options, NULL, &error); if (sinp == NULL) { if (error == 0) error = EADDRNOTAVAIL; goto release; } bzero(&laddr_mapped, sizeof(laddr_mapped)); laddr_mapped.s6_addr16[5] = 0xffff; /* ugly */ bcopy(&sinp->sin_addr, &laddr_mapped.s6_addr[12], sizeof(sinp->sin_addr)); laddr = &laddr_mapped; } else { laddr = &in6p->in6p_laddr; /* XXX */ } } if (laddr == NULL) { if (error == 0) error = EADDRNOTAVAIL; goto release; } if (in6p->in6p_lport == 0 && (error = in6_pcbsetport(laddr, in6p)) != 0) goto release; } else { if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) { error = ENOTCONN; goto release; } if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) { if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) { /* * XXX: this case would happen when the * application sets the V6ONLY flag after * connecting the foreign address. * Such applications should be fixed, * so we bark here. */ log(LOG_INFO, "udp6_output: IPV6_V6ONLY " "option was set for a connected socket\n"); error = EINVAL; goto release; } else af = AF_INET; } laddr = &in6p->in6p_laddr; faddr = &in6p->in6p_faddr; fport = in6p->in6p_fport; } if (af == AF_INET) hlen = sizeof(struct ip); /* * Calculate data length and get a mbuf * for UDP and IP6 headers. */ M_PREPEND(m, hlen + sizeof(struct udphdr), M_DONTWAIT); if (m == 0) { error = ENOBUFS; goto release; } /* * Stuff checksum and output datagram. */ udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen); udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */ udp6->uh_dport = fport; if (plen <= 0xffff) udp6->uh_ulen = htons((u_short)plen); else udp6->uh_ulen = 0; udp6->uh_sum = 0; switch (af) { case AF_INET6: ip6 = mtod(m, struct ip6_hdr *); ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK; ip6->ip6_vfc &= ~IPV6_VERSION_MASK; ip6->ip6_vfc |= IPV6_VERSION; #if 0 /* ip6_plen will be filled in ip6_output. */ ip6->ip6_plen = htons((u_short)plen); #endif ip6->ip6_nxt = IPPROTO_UDP; ip6->ip6_hlim = in6_selecthlim(in6p, in6p->in6p_route.ro_rt ? in6p->in6p_route.ro_rt->rt_ifp : NULL); ip6->ip6_src = *laddr; ip6->ip6_dst = *faddr; if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP, sizeof(struct ip6_hdr), plen)) == 0) { udp6->uh_sum = 0xffff; } #ifdef IN6P_MINMTU if (in6p->in6p_flags & IN6P_MINMTU) flags |= IPV6_MINMTU; #endif udp6stat.udp6s_opackets++; #ifdef IPSEC if (ipsec_setsocket(m, in6p->in6p_socket) != 0) { error = ENOBUFS; goto release; } #endif /* IPSEC */ error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route, flags, in6p->in6p_moptions, NULL); break; case AF_INET: #ifdef INET /* can't transmit jumbogram over IPv4 */ if (plen > 0xffff) { error = EMSGSIZE; goto release; } ip = mtod(m, struct ip *); ui = (struct udpiphdr *)ip; bzero(ui->ui_x1, sizeof ui->ui_x1); ui->ui_pr = IPPROTO_UDP; ui->ui_len = htons(plen); bcopy(&laddr->s6_addr[12], &ui->ui_src, sizeof(ui->ui_src)); ui->ui_ulen = ui->ui_len; flags = (in6p->in6p_socket->so_options & (SO_DONTROUTE | SO_BROADCAST)); bcopy(&faddr->s6_addr[12], &ui->ui_dst, sizeof(ui->ui_dst)); udp6->uh_sum = in_cksum(m, hlen + plen); if (udp6->uh_sum == 0) udp6->uh_sum = 0xffff; ip->ip_len = hlen + plen; ip->ip_ttl = in6_selecthlim(in6p, NULL); /* XXX */ ip->ip_tos = 0; /* XXX */ ip->ip_len = hlen + plen; /* XXX */ udpstat.udps_opackets++; #ifdef IPSEC (void)ipsec_setsocket(m, NULL); /* XXX */ #endif /* IPSEC */ error = ip_output(m, NULL, &in6p->in6p_route, flags /* XXX */); break; #else error = EAFNOSUPPORT; goto release; #endif } goto releaseopt; release: m_freem(m); releaseopt: if (control) { in6p->in6p_outputopts = stickyopt; m_freem(control); } return(error); }