Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
16,854 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

1075 Commits

Author SHA1 Message Date
mycroft 7bb08a12f6 Make lewatchdog() take an int, not a short. 1995-12-11 19:48:53 +00:00
pk 0d1981416d Adapt to changed mapiodev() interface. 1995-12-11 12:43:14 +00:00
mycroft 89f8e05c10 Trim NULs, in addition to spaces, in scsi_strvis(). 1995-12-11 04:43:01 +00:00
mycroft d51f726204 Fix typo, and eliminate some unneeded local variables. 1995-12-11 02:30:44 +00:00
mycroft 333f2e0065 Make several informational messages #ifdef LEDEBUG. 1995-12-11 02:21:56 +00:00
mycroft 77fce9fe33 Change format of probe messages slightly. 
Add work-around for LANCE rev. C bug, iff LANCE_REVC_BUG is defined.
 1995-12-10 08:55:07 +00:00
thorpej 7268bf552d When unconfiguring a ccd, only free as many interleave indices as 
were allocated, which may not be the same as the number of components
in the ccd.  From Don Lewis <gdonl@gv.ssi1.com>.  Fixes PR #1820.
 1995-12-08 19:13:26 +00:00
thorpej 1cd2ca323b Remove a couple of now unneeded assignments. 1995-12-07 21:54:24 +00:00
thorpej b6c6d46a82 In sdminphys(), add a comment about the semantics of the "length" field 
in a 6-byte read/write cdb (namely, length == 0 really means 256), and
that we handle this conservatively by limiting the transfer to 255 blocks.
*sigh* One just never knows how a pre-scsi-1 device is going to behave.
 1995-12-07 19:46:00 +00:00
thorpej c9895db015 In both cd.c and sd.c: 
If the read or write request can fit into a 6-byte cdb, then
	use a 6-byte cdb, otherwise use the 10-byte as before.

In sd.c:
	In sdattach(), make a note if the device is "ancient" (i.e.
	inqbuf.version & SID_ANSII == 0).

	Implement sdminphys(): if the device is "ancient", shorten the
	transfer so it will fit into a 6-byte cdb.

These changes have eliminated the rejected read/write requests on my
Sun 3/60 with 2 ESDI disks behind an Emulex MD21.
 1995-12-07 19:11:32 +00:00
christos e159767fed Repeating my mistakes twice... I used sc-> in the pci probe routine 
again, and it turned NetBSD in ostype[] to N^CtBSD... Thanks Charles (again)
Also call epstop() in the attach routine to make sure that the pci card
gets reset properly.
 1995-12-05 03:30:15 +00:00
ragge 2e654caa73 UBA converted to new config. (uba's now can be *'ed). Bug causing 
DMA writes to nonexistent memory pages fixed. Code for old config
of non-mass-storage devices removed. (they now must use new config).
 1995-12-01 19:22:56 +00:00
pk 7a7ca00077 Add quirk for Exabyte 8200/rev. 263H (from Paul Goyette; PR#1797). 1995-11-30 10:12:04 +00:00
jtc 0cd793449e merge in changes from 1.1 release branch 1995-11-30 00:56:23 +00:00
pk 3b2862c858 Make it work on little-endian monochrome buffers; per Ted. 1995-11-29 22:12:58 +00:00
pk 12bfe2e68e Must change `u_long' to `u_int32_t' as Jason pointed out. 1995-11-29 22:03:53 +00:00
cgd 0f7f390b49 allow bus-specific lance drivers to use machine-independent buffer/descriptor 
copy functions, and convert isa and pmax drivers to do so.
 1995-11-25 01:23:51 +00:00
cgd 523c12167c fix definition of nullcnpollc, and add a prototype for it. 1995-11-25 00:03:35 +00:00
cgd 540ab1b88d since 'long's in this code are meant to be exactly 32-bits wide, use 
'int32_t's instead, so that this code is usable on the alpha.
 1995-11-24 23:50:51 +00:00
cgd 13bf4371ae delete extra (blank) line in comment block 1995-11-24 23:45:40 +00:00
gwr 97fc3b8321 get size of softc right 1995-11-17 23:33:34 +00:00
christos d125a07adb My previous changes broke the pcmcia support. For now assume that all non 
PCI cards look identical to ISA cards.
 1995-11-13 20:50:22 +00:00
christos 7a68425190 Don't use the softc at probe time on pci devices because it has not been 
allocated yet. Thanks Charles...
 1995-11-12 20:55:26 +00:00
mycroft fbecb8d22b Remove the gratuitous code to check for a disc at boot time. 1995-11-11 20:07:57 +00:00
christos e4c4e9cb07 Add support for the 3c59x (pci) cards in the 3c5x9 driver. In addition 
add the necessary bits for the 3c589 (pcmcia) card without adding any
of the pcmcia framework.
 1995-11-10 19:39:21 +00:00
christos ffa8bfeda1 pcidevs was changed 1995-11-10 19:36:29 +00:00
christos c3ae59171a - pcidevs: add 3c590 and adaptec ultra 
- aic7xxx.c: fix the probe routines to use pcidevs.h
 1995-11-10 19:36:08 +00:00
ragge f51faf62ac Dynamic allocate uba_softc and interrupt vectors. 
Allow for more that one uba.
 1995-11-10 19:25:46 +00:00
mycroft d3c61be30b Convert IRQ, DRQ, and port numbers to int. 1995-11-10 05:01:05 +00:00
mycroft 38a7c4b007 Correct the format of some diagnostics. 1995-11-10 04:41:58 +00:00
mycroft d8f6a1896b Convert IRQ, DRQ, and port numbers to int. 1995-11-10 04:30:36 +00:00
thorpej 20783f6b85 Bring in several changes from the ccd: 
* Be a bit better with prototypes
	* Use struct dkdevice in vnd_softc.
	* Prevent the unit from being unconfigured while open.
	* Implement a simple locking mechanism and use it for sanity's
	  sake.
Still needs more work; needs to support disklabels and the like.
 1995-11-06 20:28:09 +00:00
thorpej 664cb04670 Fix a race condition where if a process is asleep waiting on an 
exclusive lock of a ccd device while another process is unconfiguring
that same device, the first process would never awaken (unless interrupted).
 1995-11-06 19:58:01 +00:00
thorpej f85819bc44 In ccdstart(), only translate the block number from partition-relative 
to absolute if part != RAW_PART.
 1995-11-03 02:35:54 +00:00
pk 8d78a257c0 More rogues. 1995-11-01 01:15:07 +00:00
gwr 4671e1d753 Add coyright, id string; fix comments 1995-10-26 15:46:24 +00:00
gwr c35fd76e91 Fix a comment 1995-10-26 15:38:45 +00:00
pk 4ad1c05d71 DV_NULL should be DV_DULL. 1995-10-23 15:42:50 +00:00
pk bcff7be6b7 DV_DISK => DV_NULL (from Mike Long; PR#1607). 1995-10-22 20:45:07 +00:00
pk 2f9169d20b Correct NE7CMD_FORMAT command (from John Kohl; PR#1637). 1995-10-20 00:02:20 +00:00
thorpej cbef9e5129 Add missing spindle synch control, rotational offset, and RPM members 
to the rigid geometry mode page.  These missing members are at the
end of the page, in space wich was previously marked "reserved".
 1995-10-15 23:32:02 +00:00
mycroft f096f370fb Use SET(), CLR(), and ISSET() macros. 
Rename CFCR to LCR, and cache its value.
Check MSR before transmitting, for better flow control.
Preserve LCR_SBREAK inside comparam().
 1995-10-15 19:43:04 +00:00
gwr 444e2789c6 Add quirk entries for Wangtek SCSI tapes. Also, add entry for 
Tandberg 3800 (fixes PR#1592 - from Jochen Pohl).
 1995-10-13 20:01:03 +00:00
thorpej 89d4987e5d Fix bad pointer deref, memory leak, and geometry calculation, pointed 
out by Jochen Pohl in PR #1588.  Change the interleave index to an
array of ints rather than an array of chars to avoid losing in the event
one has more than 127 components.
 1995-10-12 21:28:32 +00:00
mycroft dbce1a97aa Add specs for ahc driver. 1995-10-10 12:16:54 +00:00
mycroft 3450507404 Make sure we only schedule one timeout to refill the mbuf queue. 1995-10-10 03:11:28 +00:00
mycroft 92221a1399 Return EINVAL if something other than a whole number of blocks is requested. 1995-10-10 02:52:56 +00:00
chopps 78bd894529 add prototypes for isr stuff fixes pr# 1284 and 1569 1995-10-09 15:19:58 +00:00
chopps 3973aeb080 fix hang bug from Ignatios Souvatzis <ignatios@theory.cs.uni-bonn.de> 1995-10-09 14:05:24 +00:00
mycroft b216bead49 Add an Adaptec 2940 driver, by John Aycock and Justin Gibbs, ported to NetBSD by Stefan 
Grefen, with several bug fixes by me.
 1995-10-09 09:49:30 +00:00