64 bit block pointers, extended attribute storage, and a few
other things.
This commit does not yet include the code to manipulate the extended
storage (for e.g. ACLs), this will be done later.
Originally written by Kirk McKusick and Network Associates Laboratories for
FreeBSD.
of segments to mark. However, this may be much more than lfs_nseg.
Originally this wasn't a big problem, since only the structures in the
diskblock were changed, but nowadays there's a mirror of the segflags
in the in-core superblock. This problem caused the code to walk
way past the end of that allocated area, causing memory corruption
in other kernel structures. So, use lfs_nseg as the maximum, as it should be.
While here, simplify the loop; it had become an obfuscated piece of
code overtime.
when the filesystem is unmounted, relocking the Ifile when its lock is
draining. (We can't use vfs_busy() since the process is sleeping for a
good long time.) Clean up / organize lfs.h, while I'm here.
In lfs_update_single, assert that disk addresses are either negative, or
are still positive when converted to int32_t, to prevent recurrence of a
negative/positive block problem.
checking the memq.
Take greater care not to dirty the Ifile vnode when unmounting the filesystem.
This should fix a "(vp->v_flag & VONWORKLST) == 0" assertion panic in vgonel
that could occur when unmounting.
Do not allow the Ifile to be mapped for writing.
direct and indirect block pointers are not valid in the case of shortlinks.
while i'm here, move duplicated code in lfs_vget/fastvget into a new
function, lfs_vinit.
Note however that blocks can be added to the Ifile even when the segment
block is held because of inodes' atime. Do not panic with "dirty blocks"
if these blocks are present.
be expanded to cover other per-fs and subsystem-wide data as well.
Fix a case of IN_MODIFIED being set without updating lfs_uinodes, resulting
in a "lfs_uinodes < 0" panic.
Fix a deadlock in lfs_putpages arising from the need to busy all pages in a
block; unbusy any that had already been busied before starting over.
always true) and accompanying dead code.
- When constructing write clusters in lfs_writeseg, if the block we are
about to add is itself a cluster from GOP_WRITE, don't put a cluster
in a cluster, just write the GOP_WRITE cluster on its own. This seems
to represent a slight performance gain on my test machine.
- Charge someone's rusage for writes on LFSes. It's difficult to tell
who the "right" process to charge is; just charge whoever triggered
the write.
where the cleaner is trying to write, instead of tying up the "live"
buffers (or pages).
Fix a bug in the LFS_UBC case where oversized buffers would not be
checksummed correctly, causing uncleanable segments.
Make sure that wakeup(fs->lfs_iocount) is done if fs->lfs_iocount is 1
as well as 0, since we wait in some places for it to drop to 1.
Activate all pages that make it into lfs_gop_write without the segment
lock held, since they must have been dirtied very recently, even if
PG_DELWRI is not set.
actually happens.
Add a new fcntl call that will write the minimum necessary to checkpoint
(i.e., for on-disk directory structure to be consistent, not including
updates to file data) so that the cleaner can clean segments more quickly
without sacrificing three-way commit for cleaning.
either as a mysterious UVM error or as "panic: dirty bufs". Verify
maximum size in lfs_malloc.
Teach lfs_updatemeta and lfs_shellsort about oversized cluster blocks from
lfs_gop_write.
When unwiring pages in lfs_gop_write, deactivate them, under the theory
that the pagedaemon wanted to free them last we knew.
(there are still some details to work out) but expect that to go
away soon. To support these basic changes (creation of lfs_putpages,
lfs_gop_write, mods to lfs_balloc) several other changes were made, to
wit:
* Create a writer daemon kernel thread whose purpose is to handle page
writes for the pagedaemon, but which also takes over some of the
functions of lfs_check(). This thread is started the first time an
LFS is mounted.
* Add a "flags" parameter to GOP_SIZE. Current values are
GOP_SIZE_READ, meaning that the call should return the size of the
in-core version of the file, and GOP_SIZE_WRITE, meaning that it
should return the on-disk size. One of GOP_SIZE_READ or
GOP_SIZE_WRITE must be specified.
* Instead of using malloc(...M_WAITOK) for everything, reserve enough
resources to get by and use malloc(...M_NOWAIT), using the reserves if
necessary. Use the pool subsystem for structures small enough that
this is feasible. This also obsoletes LFS_THROTTLE.
And a few that are not strictly necessary:
* Moves the LFS inode extensions off onto a separately allocated
structure; getting closer to LFS as an LKM. "Welcome to 1.6O."
* Unified GOP_ALLOC between FFS and LFS.
* Update LFS copyright headers to correct values.
* Actually cast to unsigned in lfs_shellsort, like the comment says.
* Keep track of which segments were empty before the previous
checkpoint; any segments that pass two checkpoints both dirty and
empty can be summarily cleaned. Do this. Right now lfs_segclean
still works, but this should be turned into an effectless
compatibility syscall.
malloc types into a structure, a pointer to which is passed around,
instead of an int constant. Allow the limit to be adjusted when the
malloc type is defined, or with a function call, as suggested by
Jonathan Stone.
(backout parts of rev.1.40)
otherwise, directory structures can be corrupted because checkpoints can
occur via eg. lfs_vflush before parent directory is written.
try to reclaim them.
(workaround for deadlock noted in the comment in lfs_reserveavail)
- in lfs_rename, mark vnodes which are being moved as well as directry vnodes.
- don't wait for locking buf in lfs_bwrite_ext to avoid deadlocks.
- skip lfs_reserve when we're doing dirop.
reserve more (for lfs_truncate) in set_dirop instead.
this mostly solves PR 18972. (and hopefully PR 19196)
mark inode IN_CLEANING rather then IN_MODIFIED.
otherwise cleaned (indirect) blocks belongs to the inode isn't written
until next sync.
- add assertions.
reading blocks that isn't written yet.
it's needed because we'll update metadatas in lfs_updatemeta
before data pointed by them is actually written to disk.
XXX should be solved with fake inode/indirect blocks instead?
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
exist on an on-disk inode, we keep a record of its size in struct inode,
which is updated when we write the block to disk. The cleaner routines
thus have ready access to what size is the correct size for this block,
on disk.
Fixed a related bug: if a file with fragments is being cleaned
(fragments being cleaned) at the same time it is being extended beyond
NDADDR blocks, we could write a bogus FINFO record that has a frag in the
middle; when it was cleaned this would give back bogus file data. Don't
write the indirect blocks in this case, since there is no need.
lfs_fragextend and lfs_truncate no longer require the seglock, but instead
take a shared lock, which the seglock locks exclusively.
processes don't have to wait for one another to finish (e.g., nfsd seems
to be a little happier now, though I haven't measured the difference).
Synchronous checkpoints, however, must always wait for all i/o to finish.
Take the contents of the callback functions and have them run in thread
context instead (aiodoned thread). lfs_iocount no longer has to be
protected in splbio(), and quite a bit less of the segment construction
loop needs to be in splbio() as well.
If lfs_markv is handed a block that is not the correct size according to
the inode, refuse to process it. (Formerly it was extended to the "correct"
size.) This is possibly more prone to deadlock, but less prone to corruption.
lfs_segclean now outright refuses to clean segments that appear to have live
bytes in them. Again this may be more prone to deadlock but avoids
corruption.
Replace ufsspec_close and ufsfifo_close with LFS equivalents; this means
that no UFS functions need to know about LFS_ITIMES any more. Remove
the reference from ufs/inode.h.
Tested on i386, test-compiled on alpha.
as well as bi_daddr. This lets the cleaner have an idea of what the size
of this block was at the time it was written without having to refer to
a segment header (e.g., in the file coalescing case).
Tested on i386.
enough to be useful, and broadening it so that it did would have meant
that operations possibly requiring synchronous disk activity would have
to be done in splbio(). This clearly was not going to work.
Worked around this in the LFS case by having lfs_cluster_callback put an
extra hold on the vnode before calling biodone(), and taking the hold
off without HOLDRELE's problematic list swapping. lfs_vunref() will take
care of that---in thread context---on the next write if need be.
Also, ensure that the list walking in lfs_{writevnodes,segunlock,gather}
takes into account the possibility that the list may change
underneath it (possibly because it itself deleted an element).
Tested on i386, test-compiled on alpha.
I found while making sure there weren't any new ones.
* Make the write clusters keep track of the buffers whose blocks they contain.
This should make it possible to (1) write clusters using a page mapping
instead of malloc, if desired, and (2) schedule blocks for rewriting
(somewhere else) if a write error occurs. Code is present to use
pagemove() to construct the clusters but that is untested and will go away
anyway in favor of page mapping.
* DEBUG now keeps a log of Ifile writes, so that any lingering instances of
the "dirty bufs" problem can be properly debugged.
* Keep track of whether the Ifile has been dirtied by various routines that
can be called by lfs_segwrite, and loop on that until it is clean, for
a checkpoint. Checkpoints need to be squeaky clean.
* Warn the user (once) if the Ifile grows larger than is reasonable for their
buffer cache. Both lfs_mountfs and lfs_unmount check since the Ifile can
grow.
* If an inode is not found in a disk block, try rereading the block, under
the assumption that the block was copied to a cluster and then freed.
* Protect WRITEINPROG() with splbio() to fix a hang in lfs_update.
deal with shortages of the VM maps where the backing pages are mapped
(usually kmem_map). Try to deal with this:
* Group all information about the backend allocator for a pool in a
separate structure. The pool references this structure, rather than
the individual fields.
* Change the pool_init() API accordingly, and adjust all callers.
* Link all pools using the same backend allocator on a list.
* The backend allocator is responsible for waiting for physical memory
to become available, but will still fail if it cannot callocate KVA
space for the pages. If this happens, carefully drain all pools using
the same backend allocator, so that some KVA space can be freed.
* Change pool_reclaim() to indicate if it actually succeeded in freeing
some pages, and use that information to make draining easier and more
efficient.
* Get rid of PR_URGENT. There was only one use of it, and it could be
dealt with by the caller.
From art@openbsd.org.
- remove special treatment of pager_map mappings in pmaps. this is
required now, since I've removed the globals that expose the address range.
pager_map now uses pmap_kenter_pa() instead of pmap_enter(), so there's
no longer any need to special-case it.
- eliminate struct uvm_vnode by moving its fields into struct vnode.
- rewrite the pageout path. the pager is now responsible for handling the
high-level requests instead of only getting control after a bunch of work
has already been done on its behalf. this will allow us to UBCify LFS,
which needs tighter control over its pages than other filesystems do.
writing a page to disk no longer requires making it read-only, which
allows us to write wired pages without causing all kinds of havoc.
- use a new PG_PAGEOUT flag to indicate that a page should be freed
on behalf of the pagedaemon when it's unlocked. this flag is very similar
to PG_RELEASED, but unlike PG_RELEASED, PG_PAGEOUT can be cleared if the
pageout fails due to eg. an indirect-block buffer being locked.
this allows us to remove the "version" field from struct vm_page,
and together with shrinking "loan_count" from 32 bits to 16,
struct vm_page is now 4 bytes smaller.
- no longer use PG_RELEASED for swap-backed pages. if the page is busy
because it's being paged out, we can't release the swap slot to be
reallocated until that write is complete, but unlike with vnodes we
don't keep a count of in-progress writes so there's no good way to
know when the write is done. instead, when we need to free a busy
swap-backed page, just sleep until we can get it busy ourselves.
- implement a fast-path for extending writes which allows us to avoid
zeroing new pages. this substantially reduces cpu usage.
- encapsulate the data used by the genfs code in a struct genfs_node,
which must be the first element of the filesystem-specific vnode data
for filesystems which use genfs_{get,put}pages().
- eliminate many of the UVM pagerops, since they aren't needed anymore
now that the pager "put" operation is a higher-level operation.
- enhance the genfs code to allow NFS to use the genfs_{get,put}pages
instead of a modified copy.
- clean up struct vnode by removing all the fields that used to be used by
the vfs_cluster.c code (which we don't use anymore with UBC).
- remove kmem_object and mb_object since they were useless.
instead of allocating pages to these objects, we now just allocate
pages with no object. such pages are mapped in the kernel until they
are freed, so we can use the mapping to find the page to free it.
this allows us to remove splvm() protection in several places.
The sum of all these changes improves write throughput on my
decstation 5000/200 to within 1% of the rate of NetBSD 1.5
and reduces the elapsed time for "make release" of a NetBSD 1.5
source tree on my 128MB pc to 10% less than a 1.5 kernel took.
adjusted via sysctl. file systems that have hash tables which are
sized based on the value of this variable now resize those hash tables
using the new value. the max number of FFS softdeps is also recalculated.
convert various file systems to use the <sys/queue.h> macros for
their hash tables.
Kernels and tools understand both v1 and v2 filesystems; newfs_lfs
generates v2 by default. Changes for the v2 layout include:
- Segments of non-PO2 size and arbitrary block offset, so these can be
matched to convenient physical characteristics of the partition (e.g.,
stripe or track size and offset).
- Address by fragment instead of by disk sector, paving the way for
non-512-byte-sector devices. In theory fragments can be as large
as you like, though in reality they must be smaller than MAXBSIZE in size.
- Use serial number and filesystem identifier to ensure that roll-forward
doesn't get old data and think it's new. Roll-forward is enabled for
v2 filesystems, though not for v1 filesystems by default.
- The inode free list is now a tailq, paving the way for undelete (undelete
is not yet implemented, but can be without further non-backwards-compatible
changes to disk structures).
- Inode atime information is kept in the Ifile, instead of on the inode;
that is, the inode is never written *just* because atime was changed.
Because of this the inodes remain near the file data on the disk, rather
than wandering all over as the disk is read repeatedly. This speeds up
repeated reads by a small but noticeable amount.
Other changes of note include:
- The ifile written by newfs_lfs can now be of arbitrary length, it is no
longer restricted to a single indirect block.
- Fixed an old bug where ctime was changed every time a vnode was created.
I need to look more closely to make sure that the times are only updated
during write(2) and friends, not after-the-fact during a segment write,
and certainly not by the cleaner.