augustss
1fdafa2f13
Insert some splusb() since memory allocation and deallocation can
...
occur from an interrupt.
1998-12-09 01:02:29 +00:00
augustss
c8736358e3
Clear stall condition on interrupt pipe.
1998-12-09 01:01:24 +00:00
augustss
f8b9a417f0
Improvement to the ugen driver.
...
Better error checking.
Some code rearrengment.
1998-12-09 00:18:10 +00:00
augustss
28d60e8711
Use plaintest error messages for debugging.
1998-12-08 15:48:18 +00:00
augustss
d26c277522
Add a generic USB driver. It allows easy access to descriptors, the
...
control pipe via ioctl() and read() and write() access to bulk and
interrupt pipes.
1998-12-08 15:39:00 +00:00
augustss
4d19a06c27
Some minor API changes and additions.
1998-12-08 15:18:45 +00:00
augustss
dfff19e3d3
Take care of return code from uiomove().
1998-12-08 15:12:24 +00:00
augustss
43c3030bd5
Print plain text error codes.
1998-12-08 14:34:08 +00:00
augustss
0280322dcb
Change debug level of a printf.
1998-12-08 14:31:58 +00:00
augustss
1b499d8ce6
Make the OPL information string more informative.
1998-12-08 14:26:56 +00:00
bouyer
997074f17c
Add a missing 'return' in an error path; noticed by Matthias Drochner.
1998-12-08 13:29:31 +00:00
thorpej
10d50739c7
Actually, restructure scsipi_wait_drain() slightly.
1998-12-08 00:26:22 +00:00
thorpej
8ebf1e8824
Remove xs_free_list; it no longer exists.
1998-12-08 00:20:16 +00:00
thorpej
624619a881
When closing, wait for pending xfers to drain before deleting the reference
...
to the adapter.
1998-12-08 00:19:27 +00:00
thorpej
dcc5f32c2b
When closing, wait for pending xfers to drain before unlocking the door,
...
and wait again before deleting the reference to the adapter.
1998-12-08 00:18:46 +00:00
thorpej
1ddd2ffec0
- When allocating a scsipi_xfer, add it to the specified device's
...
pending_xfers queue.
- When freeing a scsipi_xfer, remove it from the device's pending_xfers
queue. If the queue is empty, and SDEV_WAITDRAIN is set, wakeup
those waiting for the queue to drain.
- Implement scsipi_wait_drain(), which waits for a device's pending_xfers
queue to drain.
1998-12-08 00:17:21 +00:00
thorpej
98194169ea
When allocating a device's scsipi_link, initialize the pending_xfers
...
queue.
1998-12-08 00:14:41 +00:00
thorpej
126dc6bfcc
- Remove the "free_list" member from scsipi_xfer. Add "adapter_q" and
...
"device_q" TAILQ entries. The former is for use by the adapter driver,
as it sees fit. The latter is for the scsipi middle layer to track
pending xfers per device.
- Add a pending_xfers queue to scsipi_link, to track pending xfers per
device.
- Grow scsipi_link's flags to int, and add SDEV_WAITDRAIN, to indicate that
we're waiting for the pending_xfers queue to empty.
1998-12-08 00:13:58 +00:00
mjacob
337eb43541
NOMODESENSE for all Seagate ST19171- not just FC
1998-12-05 20:52:47 +00:00
mjacob
d610e1ad3f
Update BA for new max_lun parameter for SCSIbusses. Clearify maximum luns
...
for FC HB based upon a SCCLUN define (15 for normal- 255 out of a possible
65535 for SCCLUN). Propagate loopid as adapter_target.
Roll minor platform version. Roll core version number.
Update mailbox definitions with cleaner target mode structure definitions.
Clean up some ENDIAN stuff. Correct botched ISP2100_NVRAM_HARDLOOPID offset.
1998-12-05 19:48:23 +00:00
mjacob
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
mjacob
4b8245a959
Add a max_lun property to match with the max_target property. Shorten
...
max_target to int16.
1998-12-05 19:41:31 +00:00
mjacob
33fde1ad76
Eliminate the moreluns entry as it makes no sense for fat SCSI busses (e.g,
...
FC loops). Change the semantics of scsi_probedev so that it returns 1 if
you should continue probing at this target, else 0 for not.
Replace the blanket use of '7' with the use of the new sc_maxlun property
that is now gathered from HBAs. Allocate scsipi_link arrays based upon this.
Fix a really nasty and silly bug that has been there for a while where the
number of first level scsipi_link structures was one less than it needed
to be.
1998-12-05 19:39:23 +00:00
matt
3f225e009d
Add Sigma Designs REALmagic Hollywood Plus MPEG-2 decoder
1998-12-05 19:02:14 +00:00
dbj
8f7f8d557d
made prototype for debug function wss_dump_regs match its definition.
1998-12-05 10:49:24 +00:00
mjacob
9d51ff8e34
Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control which
...
one gets compiled in by default. The default is private loop, non-expanded lun.
1998-12-05 00:28:05 +00:00
mjacob
45fb6a3e74
Add in and enable latest SBus ISP Firmware (1.31)
1998-12-05 00:25:26 +00:00
drochner
3a08ae9402
always use unsigned numbers for screen positions (for sanity - the libkern
...
min() et al. did unsigned comparisions before)
make ROWS_ABOVE / ROWS_BELOW return signed values, the negative results
occur if the cursor is outside the scrolling region
1998-12-04 20:48:04 +00:00
drochner
9175cc0ddf
The chipset manual doesn't tell the truth about the channel enable
...
register bits. Replace by experimental result.
1998-12-04 17:30:55 +00:00
bouyer
c10f6edafc
AT_ERROR should be different from AT_TIMEOUT. pointed out by Matthias Drochner.
1998-12-04 11:17:54 +00:00
pk
19f705b094
Cast bus_space_{read,write}_multi arguments.
1998-12-03 23:33:45 +00:00
augustss
a68f1ef94c
Handle the case where the device does not support GET_PEPORT better.
1998-12-03 20:43:19 +00:00
augustss
bedb40a78c
Use umodem as the modem driver stub.
1998-12-03 19:58:09 +00:00
bouyer
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
bouyer
71f33dbfa5
UDMA->Ultra-DMA in a printf
1998-12-03 17:30:32 +00:00
bouyer
334abc06cf
Correct definition for SIS_TIM_UDMA_EN macro. Ultra-DMA should now work ...
1998-12-03 17:29:01 +00:00
bouyer
e39a5bdc53
Now that vtophy() is no longuer used, re-enable WDCDEBUG, with
...
wdcdebug_pciide_mask = 0 (so that one can easily patch this variable and give
me more informations :)
1998-12-03 17:27:57 +00:00
bouyer
2b28c858d8
add a udma_mode field to wdc_softc, and use it the same way dma_mode is used
...
(higthest ultra-dma mode supported). There may be a higther ultra-dma mode
defined ...
1998-12-03 15:38:59 +00:00
oster
1b04131eff
Try a bit harder to detect the physical failure of a component, and to
...
mark that component as dead. Physical failures are handled much better now.
1998-12-03 15:14:40 +00:00
oster
3f3d8e85e6
If a configuration fails due to a non-existant spare, remember to release
...
any previously allocated components before bailing. Credit to Manuel Bouyer
for noticing this.
1998-12-03 15:06:25 +00:00
oster
679de7e878
Fix (potential) referencing of null pointer in (verbose) debugging mode.
1998-12-03 14:58:24 +00:00
bouyer
ba90b4b2d3
Add URLs of documentation source (from Matthias Drochner).
1998-12-03 14:06:16 +00:00
bouyer
7d87d6a5f6
Use correct register when disabling the second channel.
1998-12-03 13:50:38 +00:00
bouyer
8ef785add8
Restore changes from revision 1.17:
...
"If a channel has no drives, do *not* unmap its I/O regions.
It's not really safe to use them for anything else, and in legacy mode it
will just cause us to probe the channel again as an ISA device."
1998-12-03 13:30:00 +00:00
bouyer
1af63c0605
Correct a few bogons in the SiS chip initialisation.
1998-12-03 13:25:44 +00:00
bouyer
09408781c9
Ouh ! Correct the 8-bit PCI registers reading/writing functions: need to
...
multiply the register offset by 8.
1998-12-03 13:24:11 +00:00
augustss
2228eaca8a
Add configuration and interface locators.
1998-12-02 22:57:08 +00:00
augustss
cf75925c7f
Even shorter printfs at attach.
1998-12-02 22:54:52 +00:00
augustss
4b4afb8252
Regen.
1998-12-02 22:51:50 +00:00
augustss
7270b91afe
Shorten some vendor names.
1998-12-02 22:49:51 +00:00