Commit Graph

1018 Commits

Author SHA1 Message Date
jonathan fa0ee282ff Read icsr in interrupt handler (from development tree). 1998-11-29 00:58:06 +00:00
jonathan 34fe177e8e * Use dc_tty_init() to set serial-console line state both for boot-time
console setup and driver attach-time.
* Dont wire potential console lines as CLOCAL; use softcar.
* #ifdef tests on #ifdef NRASTERCONSOLE, not HAVE_RCONS.
1998-11-29 00:28:29 +00:00
jonathan cdc3ba978c Remove last vestiges of console special-case handling:
* use dc_coldparam() in dc_tty_init(), dc_kbd_init().
 * use dc_tty_init() to set line for serial console in dc_consinit()
 * only call dc_mouse_init() if the console major-number  is RCONSDEV.
1998-11-28 09:52:55 +00:00
simonb e931618c25 Don't do a mkdep on SFILES if it is empty. Stops an annoying:
cc: Warning: `-x assembler-with-cpp' after last input file has no effect
    cc: No input files
message.
1998-11-27 01:01:40 +00:00
simonb 8eef08e4ae fix another white space botch 1998-11-27 00:44:46 +00:00
simonb bf95b924c9 White space and comment formatting police 1998-11-27 00:09:33 +00:00
hwr 59acb69be1 Add (commented out) 'gre' pseudo device line. Feedback is welcome.
Inspired by Klaus Klein.
1998-11-25 20:30:44 +00:00
jonathan 89cad55ba4 Make rcons work, if configured, even when using serial console:
do rcons_connect() even if using a serial console.
  identify first attached framebuffer as being `rcons' output device.
1998-11-23 04:26:15 +00:00
mhitch 475a5c2afd RZ25 disks seem to need a short delay after a start command; the test unit
ready right afterward succeeds, but the getsize following that failed with
a "not ready".
1998-11-20 06:24:02 +00:00
mrg db3051d720 fix problems in many d_mmap routines:
- returned EOPNOTSUPP rather than -1.
	- no check for negative offset.
many of these fix potential security problems in these drivers.


XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
	paddr_t (*d_mmap) __P((dev_t, off_t, int));

by someone!
1998-11-19 15:38:20 +00:00
jonathan 20cf682664 kernel config file for pmax install via ramdisk. 1998-11-19 06:05:11 +00:00
jonathan fe83804dea Add md (memory disk) hooks for pmax. ecoff kernel with 2MB ramdisk
tftp-boots on new PROMs. (3MB is too large).
1998-11-17 22:41:05 +00:00
oster cf5710c839 Added a (commented out) configuration line for the RAIDframe device driver. 1998-11-16 16:44:55 +00:00
jonathan a3a77d9561 Add skeleton code to defer rcons console output to soft-interrupt time.
ifdef'ed out for now.
1998-11-16 00:10:39 +00:00
jonathan 03b30a046d * make scc_tty_init() callable when very cold: call scc_coldparam() directly.
Use scc_tty_init() in scc_consinit().  Declare scc_consinit() in sccvar.h.

* Remove last vestige of special-case console handling in sccparam() code.

* Call scc_consinit() from findcons scc_serial() console-setup.
  Dont PROM for scc serial console at all.
1998-11-15 11:21:52 +00:00
jonathan b6111d03f9 Add mainbus0 and cpu* lines to R4000 config. 1998-11-15 06:27:11 +00:00
jonathan 5ddadfcc95 Remove old model-specific config files. 1998-11-15 06:22:25 +00:00
mhitch 6317908feb UVM is now the standard VM system on NetBSD/pmax. 1998-11-15 05:43:32 +00:00
oster c74d32c5fc Updating of bdev's and cdev's to support RAIDframe. 1998-11-13 04:47:03 +00:00
mhitch 7b16048c5a Fix the Right-Shift on the LK501 keyboard in a different way. My previous
attempt results in the up and down arrows not repeating in the X server.
The keyboard division table is modified to place the Right-Shift keycode
into division 6 along with the Left-Shift and Control.  A corresponding
change to the X server lk201 keyboard handler is also required.
1998-11-13 01:59:51 +00:00
mhitch 010e90e0ca Cursor position offsets need different values for an sfb board with an
alternate clock that does lower resolution.
1998-11-06 03:53:40 +00:00
mhitch a7f70a5fbc Fix problem when using non-DEC CDROMS with blocksize other than 512 bytes.
This got lost when disk geometry processing was updated.

Also move the CDROM check from rzread() to rzwrite() - it doesn't make
much sense to report a read-only filesystem error when trying to read a
CDROM.
1998-11-06 01:59:25 +00:00
jonathan ba531b48c6 Use console_debugger() hook to enter DDB. 1998-10-29 21:25:17 +00:00
jonathan 5211fed3ab Michael Hitch's fix to dtop handler:
make handler FSM robust enough to not lose its place after data overrun.
  stops  keyboard from going catatonic.
1998-10-29 04:54:20 +00:00
jonathan e9441f3a72 Garbage-collect obsolete "field" intpri from ibus_attach_args.
clean up initalizers to use  correct, in-range values for ia_cookie,
which is what  ibus children passed down to ibus_intr_establish.
1998-10-23 23:01:44 +00:00
jonathan 0582e98991 Treat Wangtek QIC-150 SCSI tapes the same as Viper, so they work on
3100s as well as with the asc driver.
1998-10-22 23:01:45 +00:00
simonb e35fe182af Remove commented out OPTIONS DEC_5100 line - there was already an
uncommented line above for the 5100.
Mention "kn04" (the 5000/150) on the DEC_3MIN options line.
1998-10-20 03:03:04 +00:00
drochner 2468738337 change handling of libkern:
-sys/lib/libkern builds as library per default (as it was documented all
 the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
 (for now; should depend on actual "option LKM" or -better- functions
 included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
 by libcompat, but not the other way
1998-10-15 18:37:13 +00:00
thorpej 908cdfe4e3 Add scsibus entry points to the cdevsw[]. 1998-10-10 02:00:49 +00:00
thorpej 29d472f53d Garbage-collect the open_target_lu and close_target_lu entry points from
struct scsipi_adapter; they were not used.

Add a scsipi_ioctl entry point to struct scsipi_adapter.  This will be
used to issue ioctl commands to the host adapters.

Inspired by PR #6090, from Matt Jacob.
1998-10-10 00:28:28 +00:00
thorpej d681cf055a configure() prototype is in <sys/device.h> 1998-10-06 20:50:15 +00:00
drochner 463301afbf Use common date conversion functions - not runtime efficient, but
brain-efficient...
1998-09-26 21:02:56 +00:00
drochner 1826b0bca2 Use the RTC chip as time-of-year clock, as the PROM console and Ultrix do. 1998-09-26 20:59:42 +00:00
thorpej 2671c2fa42 Make bus_dmamap_load_uio() work, from Kevin Lahey <kml@nas.nasa.gov>. 1998-09-21 22:51:56 +00:00
jonathan 008816ea4f Changes to sys/arch/mips from ARC port, from Noriyuki Soda <soda@sra.co.jp>.
Adds (most) support for ARC platform to port-independent mips code.

Some changes (e.g., clean up of overlapping CPU/FPU ids) inspired by
comparison to the OpenBSD 2.1 codebase of Soda's ARC port.

Open issues:
 * Still no support for r4600 or mipsIV CPUs with two-way L1 cache.
   Code derived from Per Fogelstrom's OpenBSD source  doesn't work
   on mips3 pmaxes with L2 cache.

 * Still some port-specific  #ifdefs, for interrupt enable and
   pmax L2 cache-size.  Needs more thought, but overlaps with
   work-in-progress by Tohru and Tsubai on spl()s and related stuff.
1998-09-11 16:46:31 +00:00
nisimura 97acdd4415 A minor error. kn5800, a MIPS SMP machine, was codenamed "ISIS." 1998-09-11 00:06:12 +00:00
nisimura d6afdbc88b Complete to fix errors introduced by HX screen dimension detection. 1998-09-10 10:00:39 +00:00
mhitch 2c412f42bb scc_softCAR is a bit array, so set it accordingly for a serial console
port (instead of using the scc line number).
1998-09-07 19:54:15 +00:00
mhitch a91d61bced Can't use fi->fi_base to access the resolution registers: it hasn't been
initialized yet.  Use the base variable, and also use the symbolic symbols
to acdess the registers.  Also, the console max_rows is based on the
display height, not the width.
1998-09-07 19:52:49 +00:00
lukem c9db84ecc9 distclean is a synonym for cleandir 1998-09-05 15:15:14 +00:00
nisimura a3d9c9bd87 - Clearify what ioasic_init() is for. No runtime difference because
NetBSD/pmax does not fully utilize the hardware features.
1998-09-05 05:54:15 +00:00
nisimura 368fcbd069 - Remove lines make not effects from mainbus.c
- Remove direct device driver calls from dec_3100.c. Close PR#5522.
1998-09-05 04:11:04 +00:00
nisimura ff9b85d338 cdevsw[] and chrtoblktbl[] arrays were not in sync. Add missing the
two entries in chrtoblktbl[] as pointed out by Greg Oster PR#5715.
1998-09-03 07:12:43 +00:00
nisimura 78aedb2cd3 - kernel boot flag 'd' now means "enter DDB asap" like as other ports.
- bump cpu_model[] length as the longest name occupies over 30 characters.
- place machine_arch[] beside machine[] for clearity.
- nuke useless #include directives.
- small scale cleanup in vm_machdep.c
1998-09-02 06:41:22 +00:00
mrg 08528c6bd2 remove unnecessary "extern int ncpus" (was also causing egcs warning) 1998-08-29 16:24:25 +00:00
mrg 892ab683dc minor minor KNF nit. 1998-08-29 16:24:03 +00:00
mrg 06a7946b7d register -> int or nothing & egcs warnings cleanup. 1998-08-29 16:21:20 +00:00
mrg ac9132322e minor minor KNF nit. 1998-08-29 16:16:37 +00:00
mrg af81b233e1 remove unnecessary "extern int tickadj" (was also causing egcs warning) 1998-08-29 16:15:53 +00:00
mrg 6b1d637705 add "int" type to interrupt handler typedefs (egcs warning) 1998-08-29 16:15:11 +00:00