fda9343e10
bcopy -> memmove
2001-07-22 14:57:50 +00:00
3ed1e031ab
bcopy -> memcpy, bzero -> memset
2001-07-22 14:43:14 +00:00
a73374d9c8
bcopy -> memcpy, bcmp -> memcmp, bzero -> memset
2001-07-22 14:34:36 +00:00
c29fb7279b
bcopy -> memmove
2001-07-22 14:32:16 +00:00
f9493fa115
Make this compile again.
2001-07-22 14:20:13 +00:00
c4d9b998af
ptest_addr() is prototyped (in pmap.c) to return a u_long not a pointer.
...
Therefore the return value should be in %d0, not %a0.
2001-07-22 14:11:05 +00:00
f38345c6d9
bcopy -> memcpy
2001-07-22 14:09:04 +00:00
718eee7811
make linux_socketcall_argsize[] static const
2001-07-22 13:55:23 +00:00
85fbcb3c05
return EMSGSIZE rather than ENOMEM if it would not be possible to
...
allocate space for accrights within stackgap
comment the copyin() of msg.msg_control in recvmsg() is safe
2001-07-22 13:46:51 +00:00
a9356936b4
seperate -> separate
2001-07-22 13:33:58 +00:00
611461bc5e
memcpy -> memmove. Noted by Tsubai Masanari.
2001-07-22 13:21:04 +00:00
0ef3731e14
Replace memcpy's of obviously overlapping regions with memmove.
...
Noted by Izumi Tsutsui.
2001-07-22 13:08:09 +00:00
eb80d6af65
s/SPARC/UltraSPARC/ in a comment.
2001-07-22 12:20:29 +00:00
c5a6be17f4
bcopy -> memcpy, bzero -> memset, bcmp -> memcmp.
...
Reviewed by Matt Thomas, ok'd by Tsubai Masanari.
2001-07-22 11:29:44 +00:00
c84f4a5476
adhoc battery event creation for some vr machines.
...
XXX: temporary
this file is needed with vrpiu.c rev1.14
2001-07-22 10:40:09 +00:00
64b6b76a21
You must set 'HPCFB_SWAP_*' if bytes are stored in reverse order, i.e.
...
little endian like order, however, usage of 'HPCFB_SWAP_*' was widely
misunderstood because it reminded you of 'RI_BSWAP' in raster operation.
Please note that 'RI_BSWAP' indicate that frame buffer byte order is different
from natural order of system while 'HPCFB_REVORDER_*' is independent of
system byte order.
2001-07-22 09:56:39 +00:00
6c71fcb79a
Since arm26 and arm32 are heading towards shared binaries, don't distinguish
...
them for the GNU tools.
2001-07-21 16:56:07 +00:00
0d2f9028de
arm26 uses ELF.
2001-07-21 16:48:49 +00:00
044d2dfafc
Move former PS2 config to GENERIC_PS2, mostly so that it fits the
...
installation snapshot build machinery well; also improve some comments.
Adjust INSTALL_PS2 config accordingly.
2001-07-21 16:26:46 +00:00
c55c49e5e3
Make a bit more like GENERIC - add I586_CPU, NTP, SYSVMSG, SYSVSEM, LKM,
...
CD9660, INET6, though bunch of entries enabled in GENERIC is commented out,
mostly due they being not appropriate for IBM PS/2.
2001-07-21 16:12:16 +00:00
f2b42af4c6
dev/isa/if_ate.c depends upon 'ate_isa', not just 'ate'
2001-07-21 16:08:17 +00:00
0f960df346
- delete sc->sc_screens[]
...
- BUGFIX: hpcfb_alloc_screen clears real frame buffer
- Doesn't allocate any screen in attach routine
2001-07-21 14:49:58 +00:00
6780bcba0b
Add PS/2 bootfloppy, to be used for installation on IBM PS/2 machines.
2001-07-21 14:46:08 +00:00
041c56a6d7
fix LINK_SPEC
2001-07-21 13:48:40 +00:00
5241fef795
add INSTALL_PS2 to BUILD_KERNELS
2001-07-21 13:38:22 +00:00
c013461507
add pcmb\*
2001-07-21 13:22:05 +00:00
230adf61d8
Installation kernel for PS/2 machines. Only wrapper around
...
PS2 config.
2001-07-21 13:16:23 +00:00
0be60fb28d
remove MEMORY_DISK_HOOKS stuff
2001-07-21 13:15:00 +00:00
2990097219
repair validation on RTAX_GENMASK insertion. has been broken since 44bsd.
...
(freebsd3 has a fix since 1999, but has insufficient validation on sa_len)
2001-07-21 12:20:36 +00:00
ceea8c87d3
Make the size of the miniroot more easily tuneable and install it in a kernel.
2001-07-21 06:01:03 +00:00
9d85345191
Build an INSTALL kernel too.
2001-07-21 05:58:28 +00:00
8f31411496
Remove some irrelevent files.
2001-07-21 05:57:13 +00:00
338143f0e5
follow kame p2p interface management rule. use /128 when we specify
...
both src and dst addr on p2p interface. sync with kame
2001-07-21 02:28:06 +00:00
c6458f33d8
Add a small optimizetion in savevars(). break out of the loop once needcomm
...
is set since setting it multiple times only wastes cpu time.
2001-07-20 21:59:58 +00:00
3cd8eb40b0
support to change of CRTSCTS
...
change uplcom_reset parameter
2001-07-20 21:03:41 +00:00
7f070caa75
sync rt_ifp check with IPv4 counterpart (see sys/net/if_ethersubr.c 1.27).
...
sync with kame
2001-07-20 20:26:35 +00:00
d3ddc0ef44
Minor spelling fixes.
2001-07-20 19:00:38 +00:00
866fc79bb9
validate sa_len on equal() macro. without the change we may touch the content
...
of a2 beyond a2->sa_len mistakelnly. sync with kame
2001-07-20 18:52:18 +00:00
febe7ce944
- clean up more after <mips/elf.h> lossage, including killing the forced
...
support for "__main" (really __gccmain for mips), and the ctors/dtors
lists associated with this.
- add -G to SWITCH_TAKES_ARG(), so `-G 0' works as well as `-G0'
- add support for .init, .fini and .rodata (const) sections (basically
merging the generic ELF support with the MIPS support.)
kernel links and runs happily now.
2001-07-20 18:15:33 +00:00
bcd75f16cb
Duh, call the clone's entry point w/ jal, so that when it returns,
...
it returns to the correct $ra (not the parent's!!).
2001-07-20 17:37:39 +00:00
5aaa13337c
Visit clone/.
2001-07-20 17:31:24 +00:00
193161b3fe
Add a __clone(3) entry point for powerpc.
2001-07-20 17:19:15 +00:00
b722bfb186
Compensate for the syscall args stack cleanup in the clone.
...
(Pointed out by Matthias Pfaller)
2001-07-20 17:08:18 +00:00
025f122394
use definition of memory size for physical area
...
0x20000000 -> SH3_P1234SEG_SIZE
2001-07-20 14:19:59 +00:00
9e13614e51
Correct a minor nroff nit.
...
This closes PR bin/9220.
2001-07-20 13:43:50 +00:00
71d647ec7a
The common arm_elf code seems to work on arm26, so use that.
2001-07-20 13:01:13 +00:00
593fff9e8d
Default elf32 for vax to have a NetBSD OSABI. Allow for Linux/VAX to get
...
an Linux OSABI.
2001-07-20 11:57:48 +00:00
5501e1c532
This is just a RSYSCALL.
2001-07-20 11:17:18 +00:00
d615372573
off-by-one error in -prefixlen arg validation (do not permit 129 on IPv6)
2001-07-20 08:31:55 +00:00
507c97b62e
make prefixlen work on IPv4 too
2001-07-20 08:28:25 +00:00
wiz