d02bc7577d
.em->.Em
2000-01-17 21:57:14 +00:00
c330a893d5
- check whether tv_usec == 1000000, too.
...
- set the reload count of the timer unit 1 correctly
(Timer unit counts from TCOR to 0 (i.e. the length of the counts equals
to TCOR + 1)).
- use macros.
2000-01-17 21:54:32 +00:00
8cf5a56c3f
add some bit definitions
2000-01-17 21:41:13 +00:00
f4b2073531
bsd.prog.mk doesn't define/use STRIP anymore -- it's now STRIPFLAG
2000-01-17 21:21:55 +00:00
aabd13ef64
Use /var/spool/lpd/XXX as pool directory, not /var/spool/output/XXX
...
Intended to address PR #8551
2000-01-17 18:56:08 +00:00
a4cc9c62f3
remove duplicate += of OBJS, introduced in 1.158 - fixes PR #8487
2000-01-17 18:37:23 +00:00
e30f445f00
print IPv6 multicast group on -ia (-iav will avoid truncation)
2000-01-17 18:24:37 +00:00
08de376ec3
fix default route determination for inet6.
2000-01-17 18:03:51 +00:00
e51ae5d23a
Use SCSIPIRETRIES instead of hard-coded value '2' for number of retries in
...
common routines. Define SCSIPIRETRIES as 4, so that the command will finally
succeed after several consecutive downgrades from UDMA2 to PIO4.
2000-01-17 17:59:48 +00:00
ccef23e54a
mask addresses properly on netstat -inv.
...
From: Matt Thomas <matt@3am-software.com>
2000-01-17 17:54:56 +00:00
f7145f672e
Add USB-Ethernet adapters.
2000-01-17 17:47:03 +00:00
5fe2bec33e
Add Bill Paul's FreeBSD driver for the CATC USB-EL1201A chip.
...
XXX The driver is untested since I don't have any hardware with this chip.
2000-01-17 17:12:20 +00:00
725c6438c1
Use bus_space(9) functions to access the controller registers.
...
Add probes to the attach routines before poking the chip to see
where the registers are located.
2000-01-17 16:57:15 +00:00
2d7f7ef7a6
Use bus handle to in `struct fdio' to read the chip registers.
2000-01-17 16:53:18 +00:00
611f7a9938
Add offset to bus handle in `struct fdio'.
2000-01-17 16:52:04 +00:00
7ab6c9ab36
add IPv6 items.
...
s/ippcp/ipcomp/ for #108 , as
http://www.isi.edu/in-notes/iana/assignments/protocol-numbers
lists it as ipcomp, not ippcp.
2000-01-17 16:39:37 +00:00
869cdcbbcc
It seems that the ECC formatted disk/array breakage is to do with broken
...
firmware and HBAs. salyzyn_mark@dpt.com writes:
> If the card does not have (DPT) ECC memory, the card will necessarily
> not hide the block size. The PM2041 can not hide it, and some versions of
> the Firmware on the PM3334 also fail in this regard.
2000-01-17 16:34:44 +00:00
abe336bfe1
Add <machine/math.h>.
2000-01-17 16:31:34 +00:00
6910891781
Add NAN constant glue for sh3.
2000-01-17 16:27:53 +00:00
34c7685f30
Adjust for little endian environments (confirmed by msaitoh).
2000-01-17 16:21:36 +00:00
9a0577db94
Wrong () balance in dumpsize calculation.
2000-01-17 16:17:32 +00:00
65d8ab7ea0
IPv6 support.
...
NetBSD PR: 9199 (with minor changes)
2000-01-17 16:14:39 +00:00
2705db0080
do not filter address families that are not supported by kernel.
...
the behavior was introduced in 1.8 -> 1.9, by itojun, and it was
not a correct behavior.
even if we may be able to connect to the the returned addresses,
filtering them out is not a correct thing to do. for example, even if
you have partial unreachablility in IPv4, gethostbyname(3) will return
IPv4 addresses in the unreachable network nonetheless.
2000-01-17 15:57:29 +00:00
bd2e491091
make confusion of ISO 639 and ISO 3166 less likely
2000-01-17 15:51:59 +00:00
8033b76e4e
Mention you usually do not need to enter terminal type on login
2000-01-17 15:14:19 +00:00
57a4fc9141
Regen.
2000-01-17 14:56:23 +00:00
3285aaa9dc
Add a bunch of devices I found at a Linux site.
2000-01-17 14:56:01 +00:00
28c8d7c7bb
Remove some unnecessary cleanup.
2000-01-17 13:25:22 +00:00
3205164ec5
Add missing USBD_NO_COPY flag.
2000-01-17 13:23:05 +00:00
3e2f6f3a41
Regen.
2000-01-17 12:57:54 +00:00
5ebe8e5553
Add two CATC Ethernet adapters.
2000-01-17 12:57:27 +00:00
2367ad5f3d
add shutdown hook
2000-01-17 12:57:26 +00:00
6ed33701a8
fixed typo in example (fixes PR 9023)
2000-01-17 12:44:39 +00:00
af0112be28
move keymap initialization into vrkiu_init().
2000-01-17 12:22:37 +00:00
0f75dd5dc4
allow ioctl() on all scanner device nodes - now SANE can work with ss* driver
2000-01-17 11:25:31 +00:00
79641939e0
remove #if 0'ed sections.
2000-01-17 08:34:04 +00:00
88d175cdc4
sync with latest KAME tree.
...
add example section to get{addr,name}info.
s/\.Os KAME/.Os/.
2000-01-17 08:33:45 +00:00
2a09ca64fd
Added sysctl examples (read-only sysctls for now)
2000-01-17 07:22:45 +00:00
4760c9fa1b
Fix bug where NULL pointer wasn't checked before dereferencing
2000-01-17 07:21:54 +00:00
417d43539a
Remove unneeded syslog() at unmount
2000-01-17 07:21:25 +00:00
e9100143aa
in promisc mode, don't inject outgoing packet to bpf twice.
...
this is because the card gets the outgoing packet from itself in promisc mode
(not really IFF_SIMPLEX).
2000-01-17 07:06:57 +00:00
3867d18179
we don't need IFF_RUNNING for gif.
2000-01-17 06:29:07 +00:00
2042e749ad
for gif interface, sync IFF_RUNNING with IFF_UP. it does not
...
make sense to leave IFF_RUNNING during !IFF_UP (it is pseudo interface
so we need to immitate - or is it okay if we don't raise IFF_RUNNING?)
2000-01-17 05:50:12 +00:00
82070bab0c
note sysctl(8) pathname change into "1.4 -> 1.4x changes" section.
2000-01-17 05:33:14 +00:00
9546ee5f87
defopt VAX750 side effect.
2000-01-17 04:57:31 +00:00
2665d4b7c6
defopt VAXnnn so the make depend does the right thing.
2000-01-17 04:55:25 +00:00
fc838249f5
don't install /usr/sbin/sysctl (backward compat symlink)
2000-01-17 04:22:59 +00:00
114d690d03
delete unused codes.
2000-01-17 04:06:06 +00:00
f3689bd429
- no need
...
-- rtc inherit offset from WinCE.
-- keymap set by plat id.
2000-01-17 03:11:12 +00:00
2dd872c9b4
defopt COMPAT_VAX1K
2000-01-17 02:59:25 +00:00
is