remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
i4b_isic_isa.c -> isic_isa.c
i4b_avm_a1.c -> isic_isa_avm_a1.c
i4b_daic_isa.c -> daic_isa.c
i4b_itk_ix1.c -> isic_isa_itk_ix1.c
i4b_tel_s08.c -> isic_isa_tel_s08.c
i4b_tel_s016.c -> isic_isa_tel_s016.c
i4b_tel_s0163.c -> isic_isa_tel_s0163.c
i4b_usr_sti.c -> isic_isa_usr_sti.c
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
i4b_isic_pcmcia.c -> isic_pcmcia.c
i4b_isic_pcmcia.h -> isic_pcmcia.h
i4b_avm_fritz_pcmcia.c -> isic_pcmcia_avm_fritz.c
i4b_elsa_isdnmc.c -> isic_pcmcia_elsa_isdnmc.c
i4b_elsa_mcall.c -> isic_pcmcia_elsa_mcall.c
i4b_sbspeedstar2.c -> isic_pcmcia_sbspeedstar2.c
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
pci_isic.h -> isic_pci.h
pci_isic.c -> isic_pci.c
i4b_avm_fritz_pci.c -> isic_pci_avm_fritz_pci.c
i4b_elsa_qs1p.c -> isic_pci_elsa_qs1p.c
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
isapnp_isic.c -> isic_isapnp.c
i4b_ctx_s0P.c -> isic_isapnp_ctx_s0P.c
i4b_drn_ngo.c -> isic_isapnp_drn_ngo.c
i4b_dynalink.c -> isic_isapnp_dynalink.c
i4b_elsa_qs1i.c -> isic_isapnp_elsa_qs1i.c
i4b_siemens_isurf.c -> isic_isapnp_siemens_isurf.c
i4b_sws.c -> isic_isapnp_sws.c
i4b_tel_s0P.c -> isic_isapnp_tel_s0P.c
Don't allocate one large io range, this fails about every time on real
pcmcia buses (not attached to pci/cardbus bridges) because of other
devices interfering in that range. Use the bogusly small region for
now, which works purely by chance (map granularity) on cardbus bridges
too (more or less).
XXX - make this map three different, small regions after layer1 <-> layer2
XXX interface has been brought in shape.
OFW_PCI_PHYS_HI_DEVICE() - extract PCI device from phys_hi
OFW_PCI_PHYS_HI_FUNCTION() - extract PCI function from phys_hi
and the definition of `struct ofw_pci_register'.
isp_iid_set/isp_iid for fibre channel- this is because we now
fake a port database entry for ourselves. Add the additional loop
states between LOOP_PDB_RCVD and LOOP_READY.
Change and comment on a wad of Fibre Channel isp_control functions.
Change and comment on some of the ISPASYNC Fibre Channel events.
Add was_fabric_dev/fabric_dev tags to our local FC database structure
(so we can see rapidly whether something was a fabric device but is
now gone).
Add a tag which says what role this adapter should take. It can take
on the value of None, Target, Initiator or Both. None is useful for
warm failover purposes. Remove the ISP_CFG_NOINIT silliness since
a role of "None" does this.
Add a isp_lastmbxcmd tag to store the opcode for the last mailbox
command used.
to report the mailbox command that times out. Fix isp_unswizzle_sns_rsp
which for reasons *I* find obscurer just doesn't work correctly on sparc64
with words past 128. I have no idea why this *does* work on SparcLinux.
and depending on role, make sure link is up, scan the fabric (if we're
connected to a fabric), scan the local loop (if appropriate), merge
the results into the local port database then, check once again
to make sure we have f/w at FW_READY state and the the loopstate
is LOOP_READY.
minoura