0f4c5ed617
Add moused, default off.
2001-10-29 23:25:00 +00:00
f28a27bd16
if named_chrootdir is set, always repoint the /var/run/named.pid and
...
/var/run/ndc symlinks, because named_chrootdir might change between
restarts and the symlinks weren't getting updated correctly in the old code.
2001-10-11 07:10:08 +00:00
ef3e53a669
Add downinterfaces. Noticed by Thomas Klausner.
2001-09-08 06:06:52 +00:00
552b2e3600
Make this work without parameters (i.e. manual invocation)
2001-09-04 20:40:40 +00:00
d7e4ab316c
Add support to down some interfaces before shutting down the system. All
...
pppoe* interfaces are automatically shut down by this script, others may be
added to the force_down_interfaces variable in /etc/rc.conf.
2001-09-04 18:09:13 +00:00
e74599e179
Make newsyslog at boot optional, as it should have been.
2001-08-18 19:50:19 +00:00
a9356936b4
seperate -> separate
2001-07-22 13:33:58 +00:00
458d1a2516
After itojun's recent RTF_CLONED and other changes, it's not necessary to
...
add a route from an alias address to 127.0.0.1, so remove that code.
It's still necessary to configure lo0 -> 127.0.0.1 though, so emphasize that.
2001-07-08 07:16:00 +00:00
3543e0f5fa
Start "ipmon" with option "D" for daemon mode instead of starting it
...
in a subshell.
2001-07-05 05:26:57 +00:00
f27a0c8f42
Now that "fsck -p" skips file systems that are mounted read-write,
...
always perform the disk check (unless /fastboot exists). Previously
this would only occur when booting directly to multi-user, so the
fsck wouldn't happen after a single user boot going into multi-user.
2001-06-18 06:42:35 +00:00
d7d9b87b1c
Complain if $amd_master is set. This variable was used in 1.5 and prior
...
releases, but has been ignored since an am-utils update six months ago.
This fixes [misc/11971] submitted by Jun-ichiro itojun Hagino. (Note that
$amd_flags is still supported, contrary to what the PR says).
2001-06-17 01:05:40 +00:00
919eb089e2
change mountd to use its own $mountd variable (instead of $nfs_server).
...
nfsd will complain if mountd isn't set. from [misc/13135] by Johnny C. Lam.
2001-06-16 06:13:09 +00:00
1e6d1f7076
sunndd has been renamed ndbootd.
2001-05-23 20:29:14 +00:00
b934309492
sunndd has been renamed to ndbootd.
2001-05-22 14:51:37 +00:00
281a201c49
Install the file sunndd.
2001-05-21 11:09:09 +00:00
bc14be100e
Added rc.d support for sunndd.
2001-05-17 23:19:06 +00:00
2b60c3bb4f
Add support for selection of a kernel builtin keymap and/or a userspace
...
keymap file to wscons.conf.
Follows PR misc/12760 by Stephen Borrill, but uses the external keymap
file instead of individual key entries in wscons.conf. This saves a lot
of editing work if the map has to be switched.
2001-05-02 15:14:02 +00:00
96612eac97
kre notes that "echo -n" is superfluous when creating a zero length file
2001-04-29 23:57:25 +00:00
312711efe8
Treat isdnd interfaces like ppp ones, and REQUIRE isdnd here.
...
Identified by Patrick Welche on current-users.
2001-04-26 03:56:20 +00:00
bd47d831a1
depend upon isdnd as well
2001-04-26 03:55:16 +00:00
f1e776b86c
minor cleanup. add note to why syslogd is here (a la note in ppp)
2001-04-26 03:54:38 +00:00
e595ebd705
be consistent with other scripts when temporarily setting umask to 022
2001-04-25 23:27:37 +00:00
f08a3bbdf1
wrap file creation operation in: ( umask 022 ; <command...> )
2001-04-25 23:23:37 +00:00
d2c3bd6a11
- create the default accounting file with a umask of 022.
...
- set and use $accounting_command (/usr/sbin/accton) and
$accounting_file (/var/account/acct)
- fix spelo in message
2001-04-25 23:20:15 +00:00
18a7a9feca
set the umask to 022 (remembering the previous setting) for ssh_keygen()
2001-04-25 23:18:50 +00:00
5d63f9209b
store path to ldconfig in a variable and reference that
2001-04-25 13:00:17 +00:00
3909ce4551
setup tty[p-uw-zP-T]? (kern.maxpty default = 256) instead of just tty[p-s]?.
...
on platforms which don't reserve ttyv? for console on ttyv0, set up ttyv?
2001-04-25 12:59:16 +00:00
b0cda2cf0b
If the accouting file doesn't exist, create it if possible.
...
Addresses misc/12735 by Robert Elz.
2001-04-25 11:48:22 +00:00
230d9cbc0f
s/dependancy/dependency/. require NETWORK and SERVERS instead of network
2001-04-19 16:18:27 +00:00
1716d6464b
s/dependancy/dependency/. explicitly require DAEMON
2001-04-19 16:00:29 +00:00
7d15d5881b
s/dependancy/dependency/
2001-04-19 15:56:32 +00:00
c136cf3dfe
wrap kvm_mkdb arg in "s. from adam laurie in pr 12664
2001-04-16 01:38:15 +00:00
12f6faba63
check no_swap
2001-04-13 22:31:16 +00:00
f0492abe53
we now rely on /usr/libexec/virecover to get the work done
2001-04-11 21:02:44 +00:00
dc5eda62fb
Remove references to gated, except the conflict check in rc.d/routed.
...
Noted by Launey Thomas <ljt@alum.mit.edu>.
2001-04-06 09:38:54 +00:00
01c28c7f10
Add a startup script for altqd(8).
2001-04-05 23:54:59 +00:00
c4db351748
Don't install /etc/rc.d/gated any longer, since gated isn't in the
...
base system.
2001-04-05 17:04:03 +00:00
dcdec20e94
check existence of /etc/ssh_host_rsa_key too
2001-03-26 22:32:39 +00:00
27c0127814
auto-generate SSH protocol version 2 RSA key.
...
use newer command line syntax for ssh-keygen (-t <type>, instead of -d)
2001-03-26 22:21:26 +00:00
6ddd47cd37
if $named_chrootdir != "", ensure that the following files, devices,
...
and links exist:
${named_chrootdir}/usr/libexec/named-xfer
${named_chrootdir}/dev/null
${named_chrootdir}/etc/localtime
/var/run/named.pid -> ${named_chrootdir}/var/run/named.pid
/var/run/ndc -> ${named_chrootdir}/var/run/ndc
and then start named with the appropriate options to run chroot(2)ed
under $named_chrootdir as user named group named.
to take advantage of this, an admin should copy /etc/namedb ->
${named_chrootdir}/etc/namedb, and set named_chrootdir in /etc/rc.conf.
[dev/null & etc/localtime setup inspired by openbsd. i already had the rest]
2001-03-12 16:08:38 +00:00
a2c01fa479
if $named_chrootdir is defined, add ${named_chrootdir}/var/run/log to
...
the list of sockets listened to.
2001-03-12 16:04:20 +00:00
5c34a310c2
comment correction: 127/8 must not leave the node (RFC1122)
2001-03-02 03:07:29 +00:00
9c42e9ee42
explicitly REQUIRE mountcritremote. sort REQUIRE entries
2001-02-28 18:14:50 +00:00
a65b46cfa0
clarify purposes
2001-02-28 17:19:42 +00:00
12c191e0cc
support `resync' (ipf -y).
...
suggested by Johnny C. Lam in [misc/12300]
2001-02-28 17:03:50 +00:00
fac4bf8060
Add "hup" and "stop" commands. Closes PR bin/12135.
2001-02-11 00:51:35 +00:00
04e705cf5a
Depend on "ike".
2001-01-18 04:57:48 +00:00
4baa94651d
Startup script for racoon(8). Racoon provides "ike", and requires
...
"kdc" (since you might want to use IPsec on your Kerberos server,
and might be using GSSAPI to authenticate Phase 1) and "ppp" (since
racoon(8) needs to know about all of your network interfaces).
2001-01-18 02:01:12 +00:00
b170714679
The KDC requires only the network. Anyone running a KDC with
...
the binary on NFS deserves to lose.
2001-01-18 02:00:02 +00:00
cb75d98f1d
Add /etc/rc.d/poffd, for x68k power management deamon.
2001-01-14 15:37:22 +00:00
7de2724c3a
move IPv6 mode/route configuration upwards, so that !rtsol in
...
/etc/ifconfig.* is meaningful.
2001-01-13 13:26:36 +00:00
3711020b5c
extend /etc/ifconfig.xxN, for comment lines (#) and shell script
...
fragment (!). inspired by openbsd /etc/hostname.xxN.
2001-01-11 17:56:16 +00:00
5b6d57d949
Supply enough rope to let the user disable or override all interface
...
up/down magic.
2001-01-08 12:45:39 +00:00
f9d12c2349
Don't fiddle with any isdn interface if the isdnd variable is set to NO
...
in rc.conf.
Actually do install the isdnd script.
2001-01-07 17:53:36 +00:00
15a3b3b6e1
Add startup script for isdnd.
2001-01-07 17:04:49 +00:00
6c348b2e2e
add $ip6sitelocal, to control installation of reject route for fec0::/10.
2001-01-03 17:54:04 +00:00
c5ddb89d6e
Patch from Hubert. aliases never get rebuilt if aliases.db is never originally generated.
2000-12-18 07:56:41 +00:00
46d6b5a7cd
More cautious about undefined hostname check in terms of what hostname(1)
...
returns.
2000-11-26 06:46:42 +00:00
7fecedd930
I believe in that the facy nested quotes was intended to skip blank
...
lines, but am not sure it is allowed as a standard practice of the
/etc/ifconfig.xxN file.
2000-11-22 04:20:04 +00:00
f457c2158d
un-break.
2000-11-21 16:12:48 +00:00
a497b11b46
The new am-utils use now /etc/amd.conf and no longer the $amd_master file.
...
Despite that /etc/amd.conf is now the default configuration file, it needs
to be defined if you supply other options when you start amd, so add it here.
2000-11-21 12:20:12 +00:00
f8ea339f55
minor typo in previous
2000-11-21 09:59:02 +00:00
fa16d69a56
Shell programming police for sophistication; take #2 . Handle the
...
case when the filename expansion results in no match more gracefully.
Far less costy than invoking a new process.
2000-11-21 09:38:06 +00:00
f412f76212
Shell programming police for sophistication. It's not necessary
...
to enclose `prog` backquote command substitution with double quotes
as it produces a quoted string. Other changes are pending this time.
2000-11-21 08:39:50 +00:00
84fed31e23
start all raid[0-9].conf and raid[0-9][0-9].conf, not just raid[0-3].conf.
...
do in order, so that raidN.conf is started before raidNN.conf.
2000-11-17 05:43:46 +00:00
616bd9bad1
- replace `IFS='.'; set -- $int; echo $2` with ${int##*.}
...
- can't use $configured_interfaces in network_stop(), so use `ifconfig -lu`
instead
2000-11-17 04:19:06 +00:00
cb5786ecbe
make this REQUIRE also cleartmp, so that it's started after /tmp
...
is cleared, otherwise the xfs's socket might get removed
This fixes misc/10310 by Alasdair Baird
2000-11-09 00:05:31 +00:00
585c4dc3e6
Add missing -n option of sysctl(8) booted_kernel name retrival.
2000-10-14 07:33:39 +00:00
17e8cec25b
Use && and || for logical concatenations instead of -a/-o test operators.
2000-10-09 06:11:38 +00:00
15bcada9c3
- Remove extra 'rm -f' since file redirect safely clobbers existing files.
...
- Remove one sed invocation replacing it with shell internal construct.
2000-10-09 06:01:18 +00:00
a1cd6987aa
Use find(1) to search files in straight fashion with the cost of external
...
command invocation.
2000-10-09 05:33:53 +00:00
fb62520419
Avoid extra command invocation as possible, and use smart variable
...
substitution instead.
2000-10-09 05:30:17 +00:00
e4d2a57704
- avoid -a or -o logical operator of test command as possible. They would
...
introduce syntaxical ambiguousity, and having concatenation with && or
|| costs nothing because our sh(1) has test(1) builtin.
- use elif construct to avoid dungling else-ifs.
- while-read construct does not need enclosed by a sub-shell.
- variable detection could be done in eval args=\$ifconfig_$int
- smart variable substitution occationally saves lines and extra command
invocations.
2000-10-09 05:02:14 +00:00
641a3c9378
support loading ipf6.conf as well as ipf.conf.
...
inspired by [misc/11033] by Gregory McGarry <g.mcgarry@ieee.org>
2000-10-01 05:58:06 +00:00
5927169fa7
Mention "a.out" in the start message to be clear about the purpose of
...
this script.
2000-09-29 17:49:25 +00:00
c949d8af3c
Always install sshd.
2000-09-28 22:16:15 +00:00
d43acf7d93
Provide the option of running newsyslog at boot time; mainly for laptop
...
people.
2000-09-21 10:36:02 +00:00
bd11504cb2
- only perform the checkyesno on the variable named in $rcvar (rather than
...
implicitly using $name if $rcvar isn't set), and always perform this check,
even when using start_cmd (et al).
this check is performed before the pidcmd
is run, speeding up scripts that weren't going to be run anyway.
this should speed up booting slow systems.
- take advantage of the above and remove
start_precmd="checkyesno foo"
in scripts that use start_cmd.
- explicitly set rcvar=foo in the rc.d/foo scripts which have an equivalent
rc.conf entry
- fix `rcvar' and `restart' when $rcvar isn't set.
these above changes fix PR [bin/11027].
- when doing `force*', ignore the return value of *_precmd.
this fixes PR [bin/10781].
- rename what sysdb provides from `databases' to `sysdb', to reflect
the name of the script.
- improve the comments in rc.subr
2000-09-19 13:04:38 +00:00
1c61a5d083
On sendmail start, check modification time of /etc/mail/aliases
...
and couple of other common map files and regenerate appropriate
*.db files as needed.
Idea taken from RedHat 6.2.
2000-09-14 21:03:17 +00:00
42655f8ee9
REQUIRE ipnat and mountd.
...
fixes PRs [misc/10958] and [misc/10959] by Mike Santos <mike@ethmoid.org>
2000-09-06 01:05:43 +00:00
ebc99afce8
sort lines. add nonlocalswap, securelevel
2000-08-21 23:39:07 +00:00
e26f093e93
convert fsck.sh -> fsck (using kill -TERM $$ to stop autoboot).
2000-08-21 23:38:07 +00:00
b94d4bd809
sort REQUIRE lines
2000-08-21 23:36:50 +00:00
093b7f0ae5
remove BEFORE DAEMON
2000-08-21 23:35:41 +00:00
3f5134ff22
REQUIRE ipfilter and ipsec
2000-08-21 23:35:20 +00:00
8f896c47b9
`REQUIRE bootconf' in lkm1 rather than `BEFORE beforenetlkm' in bootconf.sh
2000-08-21 23:34:45 +00:00
a4517195f9
needs to run after mountcritremote, since ipnat is in /usr/sbin
2000-08-21 23:33:50 +00:00
d8b52eec28
support running /etc/rc.shutdown.local
2000-08-21 23:33:06 +00:00
ce3ce86261
migrate raising of securelevel from sysctl to separate securelevel script.
...
the latter depends upon aftermountlkm (but is required by DAEMON), so that
lkms may be loaded before the securelevel is raised.
noted by Rafal Boni <rafal@mediaone.net> in [bin/10780]
2000-08-21 23:31:24 +00:00
09251753f6
migrate rc.wscons to (already existing) rc.d/wscons
2000-08-21 23:01:36 +00:00
31a6224745
Move options into ntp_flags, to make it possible to add '-u' without
...
modifying rc.d/ntpdate
2000-08-21 14:48:39 +00:00
5007ab036b
- sshd has a pid file, so take advantage of it
...
- support `reload' arg (using default of SIGHUP)
2000-08-10 22:49:43 +00:00
690a071d43
Need bsd.own.mk
2000-08-10 22:02:07 +00:00
0b1677de5f
- provide sshd not ssh
...
- don't start until after LOGIN (after NETWORK is way too early)
- KNF (as such :)
2000-08-10 01:41:09 +00:00
f0c5d26a40
Startup script glue for the Heimdal KDC.
2000-08-06 21:32:56 +00:00
e9b5e5d87c
fix comment on DAD wait
2000-08-02 13:59:11 +00:00
dcefdf7722
Adjust comment to what's actually being done
2000-08-02 11:07:51 +00:00
8451f00774
we need to sleep for IPv6 DAD period, before and after rtsol.
...
(they are for stability in boot-time configuration)
comment from perry.
2000-08-01 20:49:11 +00:00
d6662ec62f
Change name of precmd from start_precmd to sshd_precmd. While it worked
...
fine as was, the result was the line `start_precmd=start_precmd' which
looked odd. Pointed out by Bernd Ernesti.
While here, add NetBSD RCS Id.
BTW, to clarify, as people have asked: this script does not support
pkgsrc/security/sshd -- that package comes with a perfectly fine rc script
which in addition to supporting /etc/rc.d can also be used with 1.4.X.
This script will not trivially work with the ssh package as it a.) calls
the ssh commands at the pathnames they will be installed at by usr.bin/ssh,
and b.) generates a DSA key as well as an RSA key.
2000-08-01 14:28:32 +00:00
f3983ea4df
Correct apparent past-o: RSA -> DSA
2000-07-31 21:43:52 +00:00
5cfec6f11d
An sshd startup script for use with usr.bin/sshd. Installation is conditional
...
on ${SSHDIST}, as with usr.bin/ssh itself.
This script includes a `keygen' target for regenerating RSA and DSA host keys,
and invokes this if these keys are not present when sshd is started up.
2000-07-31 20:39:41 +00:00
c438e69177
if update_motd is set, do not gratuitously force it to have an empty line
...
in it. also be a bit smarter about deleting stuff from motd during
update. it is now possible to have a one line motd just like in SunOS.
2000-07-31 00:17:05 +00:00
ea8a88f609
syslog requires databases from sysdb which creates /var/run/utmp.
2000-07-29 21:50:20 +00:00
392130e304
move recreating /var/run/utmp from mountcritlocal (where /var/run is
...
purged but /usr/bin/install is not available) to sysdb.
problem noted by Matthias Drochner.
2000-07-27 13:58:49 +00:00
48b9eee5e1
* add new dummy dependancy `NETWORK' to be REQUIREd by services which need
...
networking to be operational before starting, and use as appropriate.
NETWORK depends upon network and dhclient.
* move the guts of systemfs into mountcritlocal
* replace the dependancy on systemfs with mountcritremote, and remove the
former.
* SERVERS now also depends upon ppp
Notes:
* dhclient (and others) needs /var to be a $critical_filesystem_beforenet
* dhclient now starts before syslogd (because the latter needs /usr, and
/usr might need dhclient to be mounted)
Should fix PRs:
[install/9853] [bin/10002] [misc/10349] [port-i386/10633] [misc/10641]
2000-07-26 00:11:48 +00:00
1bf05ae3b1
the format without netmask is supported for compatibility only and not
...
specifying it is discouradged, actually
also add comments about this fact to etc/rc.d/network, for people who
don't read manpages :)
2000-07-25 18:47:28 +00:00
1a29746222
- fix typo; the first ipsec_start() should be ipsec_prestart()
...
- if ipsec.conf isn't readable and the system is booting directly to multiuser,
send SIGTERM to the parent (/etc/rc) so that init(8) aborts the boot.
2000-07-21 01:16:07 +00:00
262e4b1975
if ipf.conf isn't readable and the system is booting directly to multiuser,
...
send SIGTERM to the parent (/etc/rc) so that init(8) aborts the boot.
2000-07-21 01:14:23 +00:00
31e7834913
reword description
2000-07-20 23:36:56 +00:00
f5e99478c8
Build a list of cloning network interfaces to configure, as well
...
as normal interfaces.
2000-07-20 19:43:10 +00:00
47a3878257
reenable stop_cmd now that network doesn't get run at shutdown
2000-07-17 15:25:42 +00:00
db024b3733
add '# KEYWORD: shutdown' so that these scripts get run at shutdown time.
...
now, only scripts with the keyword `shutdown' will be run by /etc/rc.shutdown,
which speeds up shutdown and makes it more robust.
2000-07-17 15:24:48 +00:00
97d13d02c3
* remove bogus comment about aborting the boot if ipsec.conf doesn't exist;
...
this hasn't really worked and is probably too messy to resolve...
2000-07-17 13:10:54 +00:00
a8b1b91ded
* add support for `status'
...
* remove bogus comment about aborting the boot if ipf fails; this hasn't
been supported since the rc.d migration and is too messy to resolve...
2000-07-17 12:58:14 +00:00
d92b803c29
use "load_rc_config swap" for swap1 and swap2
2000-07-17 12:27:04 +00:00
8086bde7eb
share the same load_rc_config between the lkm* scripts
2000-07-15 02:30:18 +00:00
c60ddc2403
remove ip6defaultif configuration. because:
...
- ndp is in /usr/sbin, chokes on NFS-mounted /usr installation
- the option is just for IPv6 specification geek, not for normal users
2000-06-20 16:48:14 +00:00
295358cfe1
Don't warn that $hostname isn't set if the hostname is already set.
2000-06-20 08:34:33 +00:00
c45b4229e4
typo
2000-06-14 03:24:16 +00:00
60cd90f104
TODO; should check /etc/ipsec.conf owner/permission,
...
while we don't have find(1).
2000-06-13 18:17:13 +00:00
00ded2c64e
add rc.d/ipsec for ipsec configuration. when enabled, it will inject
...
/etc/ipsec.conf into "setkey -f". PR 9609.
2000-06-13 16:29:53 +00:00
246f43dbbb
use ${start_precmd} to check duplicate sendmail.cf.
...
do not use "err" on failure, it is not that fatal (it's okay if we
don't start sendmail)
2000-06-13 15:53:03 +00:00
75748efda9
Use load_rc_config
2000-06-09 14:14:44 +00:00
609377a40f
run sendmail under the following conditions:
...
- /etc/mail/sendmail.cf exists, no /etc/sendmail.cf
- /etc/mail/sendmail.cf exists, /etc/sendmail.cf same content as
/etc/mail/sendmail.cf
die in other cases. PR 10243.
2000-06-04 08:33:58 +00:00
a5f38c029b
rpcbind uses a pidfile.
2000-06-03 00:17:17 +00:00
02cd59a751
* Portmap is now called rpcbind.
...
* Add IPv6 RPC entries to inetd.conf (commented out by default, as the others)
* Add netconfig file, needed for TI-RPC code.
2000-06-02 22:54:08 +00:00
a7c4c34f96
refer PR 10100 for /etc/sendmail.cf check
2000-05-31 16:00:36 +00:00
f5e3c48aad
Depends on quota; when quotached runs while NFS clients are writing,
...
bad things happens.
2000-05-29 07:10:41 +00:00
e63bc36c7f
Call "load_rc_config()" earlier so that configuration variables are read
...
before command arguments are defined. Fixes PR bin/10220 by Ron Roskens.
2000-05-29 06:53:03 +00:00
cdc1e0be32
/etc/dhclient.conf is *not* required for dhclient to run.
2000-05-26 20:44:17 +00:00
4c318b5d41
At boot, initiate parity/mirror reconstruction as required.
...
This operation is backgrounded, and sequentially ordered.
2000-05-16 16:54:33 +00:00
d683136c9f
Don't complain about existence of "/etc/sendmail.cf" if "sendmail" is
...
not set to "YES" in "/etc/rc.conf".
2000-05-15 06:16:04 +00:00
24ad7fd36c
Add "wscons" to requirement list so that a tty used for syslog output
...
will be created before starting the syslog daemon.
2000-05-14 13:12:11 +00:00
5c1b0ec207
Use load_rc_config() (from rc.subr) instead of sourcing /etc/rc.conf.
...
This allows us or a user to change the configuration file method in
one place - rc.subr - without having to edit all of the rc.d/* files.
2000-05-13 08:45:06 +00:00
d934c3b536
only support reload as an extra command; there's too much special case
...
code that needs to be implemented to make this script totally replicate
what /usr/sbin/ndc does.
2000-05-13 03:46:42 +00:00
4bc21c2fb4
do not let 127.0.0.0/8 leave the node. based on RFC1122.
2000-05-09 10:49:26 +00:00
fff5c01493
This was doubly borken...
2000-05-07 19:03:25 +00:00
fe4377f98c
Only warn on non-default old nfsiod args.
2000-05-07 02:04:20 +00:00
78565052f1
do not cope with pre-8.10 configuration file. do not start sendmail.
...
From: hubert
2000-05-03 17:03:10 +00:00
dc09e9637e
xntpd -> ntpd
2000-05-03 14:40:39 +00:00
366bbade5a
sync with sendmail upgrade.
...
- sendmail configuration files are in /etc/mail, not /etc.
- src/etc/aliases will be installed into /etc/mail/aliases (confusing)
- rc.d/sendmail warns if /etc/sendmail.cf exists.
2000-05-03 10:55:19 +00:00
b09bd0e884
s/xntpd/ntpd/
2000-05-02 16:31:11 +00:00
e5150c9868
Out with the old, in with the new.
2000-05-02 12:19:20 +00:00
0a610ebbd3
use extra_commands= instead of using 2nd argument to run_rc_command
2000-04-30 13:23:04 +00:00
3b853f3018
remove /var/run/dmesg.boot before attempting to write to it
2000-04-30 12:39:56 +00:00
32c9a44095
- use checkyesno in $start_precmd and change start_cmd to `postfix start'
...
- use $extra_commands instead of passing "reload" to run_rc_command
2000-04-30 12:21:00 +00:00
63f94fabf2
Fix the last change so it doesn't fail due too a missing '; then'.
2000-04-29 06:01:08 +00:00
7a38ab7c44
Don't warn about $hostname not being set if $dhclient == YES; it's quite
...
likely that we'll be getting the hostname via DHCP when it runs.
2000-04-28 00:13:39 +00:00
ebe6c4d40d
Use the stop_cmd to unmount the filesystems with 'umount -a'.
...
This helps to fix the unclean reboots (at least on my system).
2000-04-27 21:00:50 +00:00
c9f5754ee8
You need to add a xxx_precmd with a checkyesno yyy if you use a xxx_cmd
...
in an rc.d script.
2000-04-27 20:58:26 +00:00
augustss