f97dcb95be
The KDASSERT macro is now defined in libkern
1996-09-25 15:10:15 +00:00
d9ec4b0569
Second arg to print function is now 'const char *'
1996-09-25 15:07:40 +00:00
8e7f6c2cf5
Catchup with -current:
...
- Extra argument to boot()
- select -> poll
1996-09-25 15:03:20 +00:00
6dde563e8f
Fix the entries for the cyclades multiport serial cards, but leave commented
...
out, like the other multiport cards
1996-09-24 19:10:41 +00:00
e6edfde31b
Rename the watchdog enable bit to reflect its polarity.
1996-09-24 17:11:53 +00:00
2b84ad395b
Don't forget to shut up Fido.
1996-09-24 16:08:36 +00:00
d137b0e8ba
Added new macro _PROF_PROLOG which contains the code sequence needed
...
to call mcount(). This is needed because the ``link a6,#0'' insn used
trips up gcc's ANSI preprocessor (A # in a function-type macro must be
followed by a macro argument). _PROF_PROLOG is also used in the i386
asm.h.
Solaris' asm_linkage.h has a MCOUNT macro similar to _PROF_PROLOG
except it expands to different code sequences based on whether a
function is being compiled with "prof" or "gprof" instrumentation.
I also discovered that the m68k ALTENTRY is very different than the
implementation used by other NetBSD ports. Usually ALTENTRY simply
provides an alternate function entry point. The m68k version takes a
second argument and jumps inside the second function when profiling is
enabled. The m68k behavior is similar to the ENTRY2 macro found in
solaris.
Providing ENTRY2 and changing all the code that uses ALTENTRY to use
it would be a desirable change.
1996-09-24 00:05:55 +00:00
c54f6f32d9
update for ELF toolchain support
1996-09-23 04:32:59 +00:00
a47aa08a3e
define ELFSIZE to 64, for exec_elf.h
1996-09-23 04:32:44 +00:00
3bd3e6250d
checkpoint current development, add ELF toolchain build support
1996-09-23 04:30:56 +00:00
6048292ba8
add -DECOFF_COMPAT to CPPFLAGS if ELF_TOOLCHAIN not defined.
1996-09-23 04:28:46 +00:00
c225908c90
add netboot
1996-09-23 04:28:23 +00:00
21761e4ec0
Update for recent config(8) changes.
1996-09-22 06:49:09 +00:00
a5aa202ea9
kill unused options. no point in wading through lots of lines of commented
...
out garbage that will never be useful on this machine.
1996-09-22 03:00:32 +00:00
3fd5d3ba03
Add prototype for function-pointer argument "strat" in definition of
...
readdisklabel(), writedisklabel(), and compatdisklabel().
1996-09-21 11:25:51 +00:00
3a51c3ecb0
Move old 4.4bsd/pmax driver declaration below prototypes of driver
...
entry points, for -Wall -Wstrict-prototypes.
1996-09-21 08:47:17 +00:00
073248247b
Add prototype for 4.4bsd/pmax scsi-driver d_done() entry point.
1996-09-21 08:45:41 +00:00
cb5732503f
Add fake, bogus prototype for gettcinfo(), with "void" arglist.
...
(Not having a prototype breaks -Wstrict-prototypes, this callback
isn't used, and we don't know what the prototype should be.)
1996-09-21 03:33:18 +00:00
456e858536
Update pmax framebuffer drivers for -Wall -Wstrict-prototypes:
...
* include <fb>var.h in <fb>.c
* remove delete declarations for 4.4BSD-Lite console/kbd/mouse redirection
* Add prototypes where not already present.
1996-09-21 03:25:15 +00:00
f78ff890d7
Change bt478.c to include bt478var.h from bt478.c.
...
Remove redundant declarations.
1996-09-21 03:22:24 +00:00
2e4e1695fe
Exported declararation of console-attach function for glass-tty consoles
...
on Decstation TURBOchannel fb drivers.
1996-09-21 03:06:36 +00:00
5c2d5169b2
Exported declarations from brooktree bt478 chipset-level driver,
...
used in DEC pm framebuffers.
1996-09-21 03:02:10 +00:00
be78089fff
* Add missing `UADDR' argument to RESTORE_USER_REGS() macro calls.
...
* Add back copyright notice and rcs ID from parent of previous
revision (pre-merge).
1996-09-20 23:44:10 +00:00
ab49e34013
Don't attach an rcons to a cgfour/cgeight overlay plane; it doesn't work
...
properly. Problem reported by Charles Hannum.
XXX This is temporary until someone with the hardware has time to fix it!
1996-09-20 17:35:49 +00:00
8644dce05c
start on some network boot blocks. they work, but:
...
(1) the if_prom code needs to be cleaned up quite a bit
(right now it hard-codes client's ethernet address), and
(2) much of this code (esp: getsecs.c, netboot.c, newvers.sh,
rpcc.S) should be shared with other Alpha boot blocks,
and dev_net.[ch] should maybe go in libsa proper.
1996-09-18 20:03:04 +00:00
675e59d762
fix for elf loading, from Matt Thomas
1996-09-18 19:34:33 +00:00
4a465f05ff
Decstation kernel config file for diskless installation:
...
root and swap on NFS, but includes disk and tape drivers.
Prune out most `optional' options to stay small in the hope of avoiding
PROM tftp bugs.
1996-09-18 14:10:24 +00:00
420c045b41
Create broken-out config files for decstation baseboard devices.
...
Add sample config files that use them.
1996-09-18 13:43:37 +00:00
de735d506d
Fix for problem report port-pmax/2173: the local variable "inst"
...
in the branch-emulation code was uninitialized, due to a misplaced #endif.
Remove the relevant #ifdef (macro version of GetBranchDest), and move the
XXX note about r4000 branch targets to the function definition.
1996-09-18 11:16:20 +00:00
197a86e724
Don't allow get_physical to attempt get_pte if mmutype is 68040.
...
(At least until get_pte works on the 040).
1996-09-18 03:33:23 +00:00
886dba6dff
(1) split load-file functionality out from the 'main program' of the
...
boot block, since it will be shared with the network boot block.
(2) Kill a.out support, since it never worked was never used, and will
never be.
(3) Add support for booting of ELF kernels, from Matt Thomas. (Currently
untested, but it compiles.)
1996-09-17 22:00:24 +00:00
a68b586a74
add _rtt as an XLEAF into start which (like 'halt') just halts
1996-09-17 21:26:45 +00:00
abcbfbdd93
use assembler directives and labels that make both the ELF- and ECOFF-
...
targeted assemblers happy.
1996-09-17 21:17:11 +00:00
8110fe7ca7
Differentiate between disked ("SCSI") and network ("BOOTP", but not yet MOP)
...
booted_dev specs. Add code to find the device, if booted from the network.
1996-09-17 21:04:25 +00:00
cab0e2aba3
hmm, fix an apparent typo (two letters got deleted!)
1996-09-17 20:58:58 +00:00
56386f3e35
Differentiate between disked ("SCSI") and network ("BOOTP", but not yet MOP)
...
booted_dev specs. Add code to find the device, if booted from the network.
1996-09-17 19:46:37 +00:00
88a5419c15
print default device names slightly more nicely. (if not disk device,
...
don't print a blank before the close paren.)
1996-09-17 19:41:52 +00:00
ad20e52d11
Commit snapshot of reworked dc driver to trunk, to pull up fix for
...
serial consoles to the 1.2 branch. Includes:
* dynamically allocated new-config softc
* remove dependencies on Decstation CPU type, use flags in softc instead.
* pass in values for softc flags (q.v.) from parent-specific attach code
* #ifdef out rts/cts flow control support until it's known to work on
200s.
* redo initialization of serial consoles (needs more work).
1996-09-17 19:34:40 +00:00
82f8d6bb4b
added ccd(blk)/ch/uk device
1996-09-16 20:08:56 +00:00
d13cb4414c
Convert `fpu_type' to the more consistent `fputype', and use the new
...
#defines from m68k/include/cpu.h.
1996-09-16 18:00:26 +00:00
66992c7399
sync with GENERIC: add pseudo-device 'rd' with one unit
1996-09-16 16:34:15 +00:00
0006f58df7
add EISAVERBOSE, TCVERBOSE as appropriate. Add UCONSOLE to all.
...
slight cleanup + sync.
1996-09-16 16:30:40 +00:00
0e805391a3
Prepare for (soon to come) et4000 PCI console
1996-09-16 06:49:03 +00:00
ef074b3031
Prepare for (soon to come) et4000 PCI console.
1996-09-16 06:43:32 +00:00
edc2de87d0
Initialize MFP2 on both TT&HADES.
1996-09-16 06:28:41 +00:00
11c0ef7354
atari_realconfig now defined in <atari/device.h>
1996-09-16 06:27:11 +00:00
1b4ecd8255
Fix bootcode to work on the 68040.
1996-09-16 06:25:45 +00:00
72c7d3589f
Get it into sync with the previous changes to locore.s
1996-09-16 06:24:36 +00:00
7a128f0c7e
Sync with changes in the grf/ite/view system.
1996-09-16 06:22:27 +00:00
70747dc24f
Add support for Hades platform.
1996-09-16 06:20:44 +00:00
leo