52242fdf9f
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:28:59 +00:00
aa195e816f
Fix PR9240: comment above cpu_fork() out of synch with reality on most ports.
...
(comment change only, but was wrong for more than just i386).
2000-01-20 22:18:54 +00:00
87e1b0f9b7
Add overlay to kernel configs.
2000-01-20 19:12:28 +00:00
a0397a2573
Move callout initialization to a single location; no need to duplicate
...
that code all over the place.
2000-01-19 20:05:30 +00:00
e61f177ab1
STRIP -> STRIPPROG
2000-01-19 16:29:54 +00:00
644b514c39
Change STRIPFLAGS=-g for cross-toolchains.
2000-01-19 14:44:58 +00:00
0b9af6bdce
check whether tv_usec >= 1000000
2000-01-19 02:52:16 +00:00
8201b36ca0
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:43:02 +00:00
97a60329d2
Apparently, the Mac TV is a re-packaged Performa 550. Add code to
...
recognize this so that Mac TV users can finally ditch the MRG_ADB option.
1999-12-25 08:16:34 +00:00
11e6c54cfc
C99: Define a NAN macro in <math.h> which evaulates to a constant expression of
...
a single-precision quiet NaN; only to be defined on platforms that do support
this value.
1999-12-23 10:15:05 +00:00
1c5a093819
Make this compile without bpf. Problem noted by Bob Nestor, fix from
...
Frederick Bruckman.
1999-12-20 01:06:40 +00:00
3310f57beb
Replace references to PGOFSET with m68k_trunc_page() and m68k_page_offset(),
...
as appropriate.
1999-12-12 08:18:48 +00:00
a15eb6dc13
An interrupt handler may change adbInCount underneath us, so qualify the declaration
...
with volatile. The bug didn't show its face until more agressive
optimization showed up, apparently a result of the last egcs upgrade.
(The interrupt handling changes from June have certainly also played
a part.) Thanks to Ken'ichi Ishizaka for discovering the problem.
1999-12-10 00:03:47 +00:00
26e1b45757
clrnd()/clbase() discarding.
1999-12-05 11:56:30 +00:00
0513268399
CL* discarding.
1999-12-04 21:13:19 +00:00
3029c58799
Use a bitwise-and to test CC_IPURGE, not a logical-and. This could have led
...
to flushing the entire cache unnecessarily.
1999-11-28 11:10:47 +00:00
86a8f1d201
Sync cachectl1() implementation with other m68k ports.
1999-11-28 10:36:56 +00:00
99d3468790
Don't use the plural form of the word "target" if there is only one!
1999-11-28 10:10:51 +00:00
dc2663bf69
If there is only one ADB device, it will do us no good to avoid it
...
when guessing which device to poll next. Resolves PR 7407, but the
bug is a lot older than that.
1999-11-28 10:07:34 +00:00
2454426afe
Take a cue from the i386 port: Enable DHCP by default, rather than
...
BOOTP.
1999-11-24 22:01:19 +00:00
e9a0023b37
bring in content of GENERIC.v6 into GENERIC.
...
remove GENERIC.v6 file (as it is part of GENERIC now).
"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.
if you have problem compiling with INET6 on archs I do not have access to,
please contact me.
XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 14:00:37 +00:00
8bec119fcc
Add commented out option SOFTDEP to all GENERIC kernels.
1999-11-15 19:10:44 +00:00
d116707af0
Add
...
prefix ../gnu/sys
cinclude "conf/files.softdep"
prefix
to all std.* files, so that soft dependencies can be activated using
"options SOFTDEP".
1999-11-15 19:00:25 +00:00
1946167939
Update for pmap_enter() API change. No functional difference.
1999-11-13 00:30:26 +00:00
1c2019b5a8
Rip protection against multiple inclusion from wrapper headers.
1999-11-09 21:34:03 +00:00
4ecba735df
Garbage collect adb_initted.
1999-11-07 08:22:50 +00:00
0b8b3c403e
In the interrupt handlers, check adb_polling instead of
...
adb_initted to decide whether to handle 'recovered' interrupts
immediately.
1999-11-07 08:18:24 +00:00
26208b5e57
Garbage-collect adb_init(). It's been dead for a long time.
1999-11-07 08:08:10 +00:00
c11dd8b6dd
We want adb_polling set regardless of whether we're using the MRG driver.
1999-11-07 08:07:20 +00:00
8da942f249
Oops... last rev created an unused variable. While here, clean up
...
adb_reinit()'s variables a bit, too.
1999-11-07 06:15:09 +00:00
23411c4c1b
Convert one more buffer copy that I missed in rev 1.28.
1999-11-07 05:50:26 +00:00
a7628ea793
Always using polling for poweroff (from macppc).
1999-11-07 00:16:39 +00:00
27adad708f
ite_polling -> adb_polling
1999-11-07 00:12:55 +00:00
57dc0b9f46
We need adb_initted in a couple of places; declare it here.
1999-11-07 00:12:54 +00:00
ad43c94436
ite_polling -> adb_polling
1999-11-07 00:12:53 +00:00
c827b513ac
Convert buffer copies to memcpy().
1999-11-06 23:50:29 +00:00
12a535f5ef
Add more delay in adb_reinit() (from macppc).
1999-11-06 23:44:32 +00:00
560a7ef713
Change the behavior of spladb() so that it raises the IPL only
...
high enough to block ADB interrupts.
1999-11-06 23:05:40 +00:00
c738f52fb3
Update an outdated comment.
1999-11-06 22:44:52 +00:00
b46c7fc44d
Don't invoke the upper half handler unless we're still
...
initializing the ADB bus. This fixes PR 7870.
1999-11-06 22:25:20 +00:00
7aa7583c8e
Enable interrupts during delay calibration. We pretty much have
...
to allow this exception so that accurate tuning of delay() can be
done (i.e. avoiding VIA-related wait states and cache effects as
much as possible).
XXX During this narrow window, it is still conceivable that we could
get interrupts from devices other than the VIA timer. Normally this
shouldn't be a problem because interrupt handlers should generally
not be registered until we get to autoconfig. It is, however, a
potential pitfall to be aware of.
1999-11-05 19:14:56 +00:00
55c161d3da
Since nothing depends on interrupts during autoconfig proper
...
any longer, we can finally avoid enabling interrupts until the
end of cpu_configure(). This resolves a long-standing issue that
has caused us trouble several times in the past.
1999-11-05 19:06:39 +00:00
41ae6be989
Defer ADB configuration until interrupts are (normally) enabled.
1999-11-05 18:27:11 +00:00
902801374a
An aesthetic change to autoconfig output to complement Colin Wood's
...
change to macrom.c in June.
1999-11-05 18:08:02 +00:00
92d294b3dc
Add and enable Coda file system and pseudo-device vcoda. Closes PR 8625.
1999-11-05 09:59:25 +00:00
8e579b4df3
Enable mi Coda driver (PR 8625).
1999-11-05 09:54:07 +00:00
a15f217211
[Redo] Allow rates higher than 57600, per PR 8070. Change originally
...
from Bill Studenmund.
1999-11-02 06:51:45 +00:00
9894ab10b4
[Redo] Catch up with recent changes to scsipi flags. Closes PR 8675.
1999-11-02 06:42:26 +00:00
8a407bd3c3
Reserve a character device slot for wsdisplay.
1999-11-01 05:29:21 +00:00
5c0a9c0483
Sync trace trap handling with other m68k ports, originated by
...
ITOH Yasufumi. Coincidentally closes PR 7738.
1999-10-31 08:18:59 +00:00
thorpej