dc59bc1db3
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:39:55 +00:00
52242fdf9f
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:28:59 +00:00
2d0426d8d2
Recognize MPC7400.
2000-01-21 18:49:52 +00:00
16ea7fbbbb
Match "keylargo-ata".
2000-01-21 18:45:14 +00:00
331b00d2d8
Add "dumps on none" to config.
2000-01-21 13:38:47 +00:00
df99dfd934
Simplify toggling the FTP bit on sun4m machines.
2000-01-21 13:25:12 +00:00
252d47729f
Update FDC offsets used by fdintr.s
2000-01-21 13:24:06 +00:00
6b2ebb44a7
Move several PIL_* definitions into the scope of LOCORE stuff.
2000-01-21 13:22:55 +00:00
f8ac5484fa
Medium sized code overhaul:
...
* Improve communication between the `hard' and `soft' interrupt handlers
to better distinguish various interrupt sources.
* Eliminate several race conditions where we would set a time out handler
only after starting the command on the hardware.
* Handle most timeouts by resetting the controller; there isn't much chance
of recovery in any other way. Currently, the exception is a timeout
on I/O, in which case we first try to pulse the controller's TC line
in order to abort the pseudo-dma sequence. Apparently, "normal"
conditions can induce such a timeout when there's no disk in the drive.
* Reduce the formatting gap parameter to 0x54.
* On the obio bus, interpret the `status' attribute.
* Minimize console diagnostic output if the errors we get appear to be
caused by the absence of a disk.
2000-01-21 13:22:01 +00:00
7d6a332830
change miniroot size.
2000-01-21 11:29:53 +00:00
aa195e816f
Fix PR9240: comment above cpu_fork() out of synch with reality on most ports.
...
(comment change only, but was wrong for more than just i386).
2000-01-20 22:18:54 +00:00
87e1b0f9b7
Add overlay to kernel configs.
2000-01-20 19:12:28 +00:00
e1598bac13
fix misspelling
2000-01-20 17:16:25 +00:00
c6459da685
add SES device
2000-01-20 17:13:27 +00:00
c6b70bdfe2
Use .PATH.c not .PATH otherwise builds without objdirs fail from biosboot_com0.
...
Reported by Tron.
2000-01-20 16:51:01 +00:00
8395a5e928
like com.c, raise DTR/RTS in console initialisation
2000-01-20 15:22:57 +00:00
9d51226cc3
fix typo in comment.
2000-01-20 03:19:27 +00:00
5d5b2822ec
Don't need to include opt_vax8600.h. Always defined the 8600 specific bits.
2000-01-20 00:07:49 +00:00
e92c1387ea
G/c unused variable.
2000-01-19 23:06:06 +00:00
a0397a2573
Move callout initialization to a single location; no need to duplicate
...
that code all over the place.
2000-01-19 20:05:30 +00:00
e61f177ab1
STRIP -> STRIPPROG
2000-01-19 16:29:54 +00:00
995d49ac90
Add #include <machine/cpu.h>
2000-01-19 16:13:50 +00:00
644b514c39
Change STRIPFLAGS=-g for cross-toolchains.
2000-01-19 14:44:58 +00:00
b54595a488
Make sure that everything in GENERIC is in ALPHA, and that the two files
...
have config lines in the same order to make diffing easier.
2000-01-19 13:53:47 +00:00
7396daca2b
No longer abuse cf_unit. This broke with the latest autoconf changes.
2000-01-19 13:23:14 +00:00
4911054546
Allow storage-space to be passed to the alloc_bus_space_tag() functions. This
...
permits static tags to be used during early console init.
2000-01-19 13:12:54 +00:00
73b79d6c25
Make sure that everything in GENERIC is in ALPHA, and that the two files
...
have config lines in the same order to make diffing easier.
2000-01-19 07:04:23 +00:00
c79473b2b7
Add vr driver and missing phys.
2000-01-19 06:09:03 +00:00
6c14ba0dba
Fill in the alignment trap handler a bit: now it can fix unaligned
...
floating point loads and stores (to work around a gcc bug), but will
still cause a bus error on other sorts of unaligned accesses.
2000-01-19 03:30:12 +00:00
83cfcdd15a
Add a special trap handler for EXC_ALI that saves dsisr and dar
2000-01-19 03:28:21 +00:00
c10e001ee2
Sync, +IPv6.
2000-01-19 03:05:06 +00:00
1c92c8d7ed
Add a sequencer to go with the midis.
2000-01-19 03:01:46 +00:00
0b9af6bdce
check whether tv_usec >= 1000000
2000-01-19 02:52:16 +00:00
1de974fc2e
Use PCI products defined in pcidevs.h
2000-01-18 20:05:23 +00:00
f51f762b8d
Update to reflect current reality.
2000-01-18 20:02:32 +00:00
ce2b722aec
No need to define MPC105 and MPC106 PCI products here.
2000-01-18 20:01:28 +00:00
c4e802b942
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:52:21 +00:00
ca44eb8d21
iodone() -> biodone(), iowait() -> biowait()
2000-01-18 19:51:03 +00:00
d7e6de4a08
iodone() -> biodone()
2000-01-18 19:50:32 +00:00
4f27a98702
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:48:02 +00:00
8808155fa6
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:46:07 +00:00
8201b36ca0
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:43:02 +00:00
0684e6f83b
- Use b_cylinder as defined in sys/buf.h
...
- Add an empty dk_establish()
2000-01-18 19:40:53 +00:00
c241e27b63
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:37:58 +00:00
d0bb9fdf22
Remove one line of junk.
2000-01-18 19:36:58 +00:00
ed244ca8e4
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:34:24 +00:00
71b89434fa
Remove one line of junk.
2000-01-18 19:33:31 +00:00
251eb03a2b
Only prototype and include code for scc_kbd_init() and scc_mouse_init()
...
if NRASTERCONSOLE > 0. Fixes problem reported on port-pmax by Anders
Andersson.
2000-01-18 12:19:49 +00:00
7d3068a3b4
use macros
2000-01-17 21:59:43 +00:00
c330a893d5
- check whether tv_usec == 1000000, too.
...
- set the reload count of the timer unit 1 correctly
(Timer unit counts from TCOR to 0 (i.e. the length of the counts equals
to TCOR + 1)).
- use macros.
2000-01-17 21:54:32 +00:00
thorpej