2fe85a6623
Uniformly pass a "struct isdn_l3_driver *" through layer 2, so we
...
do not have to search for that driver later while we already knew it
at layer 1.
2002-05-21 10:31:10 +00:00
3d49645449
Remove debug printf accidently commited.
...
Noticed by Thomas Klausner.
2002-05-17 09:28:34 +00:00
da0b574ae0
Comment out token after #endif.
2002-05-16 19:30:41 +00:00
d1a8d9aaa3
Sync layer 3 B-channel accounting with layer 2.
...
Sprinkle some update_controller_leds() calls to places that change this
state.
2002-05-02 18:56:55 +00:00
14a494bc05
return ENXIO if a driver cannot be found
2002-04-17 15:23:47 +00:00
e4998611e9
Fix copyright notice.
2002-04-14 12:24:26 +00:00
a56dc0602f
Document a puzzling assignement.
2002-04-12 06:21:57 +00:00
30453d09bc
Print hardware device name in layer 1 debug output.
2002-04-09 20:48:21 +00:00
7486d374b8
Fix typo in debug message.
2002-04-09 20:47:24 +00:00
bf8b82a971
Move isic_intr_enable to a file not depending on the HSCX driver, so
...
ifpci-only configurations build again.
Remove the now unused controller enable function from the passive drivers
l2<->l1 interface.
2002-04-01 12:14:26 +00:00
ed4ba39c75
Add a command to layer 1 drivers to update LED state for controllers that
...
have status LEDs.
2002-03-30 17:54:17 +00:00
4afabfd9b3
Cache a pointer to layer 3 driver state in a call descriptor.
...
Use this instead of expensive isdn_find_l3_by_bri() calls where possible.
2002-03-30 11:43:33 +00:00
e14f4779db
Avoid duplicate expensive lookups by passing a pointer to the call
...
descriptor/a pointer to the layer 3 state directly to driver functions,
instead of their ID/index.
2002-03-30 11:15:41 +00:00
3ba8ce25ee
Pass subaddresses and calling party number type/plan to userland on
...
incoming calls.
2002-03-30 07:08:13 +00:00
f5e2c967fc
Split BRI attaching into two phases, so lower layer drivers can get their
...
BRI identifier and L3 driver state early on, then finish initializing and
announce the controller to userland when it's ready.
2002-03-29 20:29:53 +00:00
ea03e4fc22
Better check ioctl parameters and reject requests for not (currently)
...
present controllers.
Clear our TEI on persistent (physical) deactivation, instead of setting it
to a bogus 0.
2002-03-29 15:01:27 +00:00
ebd73ccd11
After Jason Thorpe explained to me how it is supposed to work, implement
...
(de)activate for pcmcia cards.
Implement detach/(de)activate for PCI cards.
Clean up internal state (free call-descriptors) if a controller is
detached while it has open connections.
2002-03-27 07:39:35 +00:00
9611ef91c3
Cosmetical nitpick: initialize TEI to -1 instead of 0, to prevent
...
controllers that don't touch it at all to display a bogus, but
theoreticaly valid value.
2002-03-25 20:28:41 +00:00
0db68b667b
Now that we have all pieces in place (and enough granularity to specify
...
B-channel and D-channel drivers separately) split the Fritz!PCI card
driver out of the isic driver.
The new device is called "ifpci" and uses the same D-channel driver as the
isic devices, but has it's own B-channel driver.
2002-03-25 16:39:52 +00:00
909e313a80
Remove a leftover from the BRI registry at layer 2.
...
Initialize layer 2's idea of it's BRI id after attaching.
2002-03-25 14:44:46 +00:00
963ecd396e
Plug a memory hole when detaching ISDN controllers.
2002-03-25 14:25:06 +00:00
a994533d0a
Make pcmcia cards detach properly.
...
Notify userland of attaching/detaching cards.
This partly fixes PR 15951.
2002-03-25 12:07:33 +00:00
0bc69b6498
Now that we have all the pieces of the puzzle available start to unriddle
...
and move them in their proper places.
Move the BRI registry from layer 2 (duh!) to layer 4, so active cards
(which don't have layer 3 or layer 2 in their driver). Remove all remaining
hard coded controller and driver types. Remove any arbitrary hard coded
limits, at least those that show up in the internal API.
This fixes PR 15950.
2002-03-24 20:35:43 +00:00
9cea4a0ab0
Bring the daic driver into the new ISDN world order.
...
Enable active card support in the ISDN subsystem. (Had been disabled since
it couldn't be tested before.)
2002-03-22 09:54:15 +00:00
4a7710e8d9
Fix a long standing confusion between n_mgm_command and mph_command_req
...
by removing the former completely.
This makes isdntrace work again.
2002-03-19 20:10:45 +00:00
af693ebcf6
Wakeup sleeping processes when the ISDN connection gets established
...
or disestablished. Hint from Matthias Drochner.
2002-03-18 23:28:03 +00:00
b07c2da1c9
Fix an uninitialized use of a variable by removing it completely.
2002-03-18 22:15:28 +00:00
e2c42aeaa8
Remove all knowledge about specific application (layer 4) drivers from
...
the generic layer 4 and layer 3 management system.
This should make the layer 4 driver API LKM clean - finaly.
Make the Fritz!PCI driver work again after resent changes (oops!),
noted by Frank Kardel (PR 15948) and Matthias Scheeler.
2002-03-17 20:54:04 +00:00
14a03255ac
Remove the hard coded layer 4 driver coding from the accounting data
...
and functions, use the call ID instead.
2002-03-17 11:08:31 +00:00
1e802e7eba
Clean up the application (layer 4) driver vs. B channel driver interface.
...
One step further on the way to make layer 4 drivers LKMable.
2002-03-17 09:45:58 +00:00
94881fb123
Rename ISDN devices, per discussion on tech-kern. The network devices
...
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).
2002-03-16 16:55:51 +00:00
c651007643
until the B-channel bookkeeping is fixed, do at least as much as necessary
...
to get rid of bogus error messages
2002-02-14 16:46:23 +00:00
29cc8db414
until the B-channel bookkeeping is fixed, do at least as much as necessary
...
to get rid of bogus error messages
2002-02-14 16:20:47 +00:00
3131bb3941
Reduce the "unknown protocol discriminator" message from "error" to
...
"information". On my mixed Euro-ISDN/1TR6 line I get fooded otherwise.
2002-02-14 16:17:05 +00:00
046f73ccbb
More ALTQ gotchas from Thomas Klausner:
...
Use IFQ_SET_MAXLEN instead of accesing opaque queue members directly.
Don't forget to IFQ_SET_READY the queue.
2002-02-10 15:29:58 +00:00
7942602380
Don't crash when trying to read phone data while there is no ISDN
...
connection. From FreeBSD, via Matthias Drochner.
2002-01-27 11:42:13 +00:00
a585d748dc
Duplicate include protection.
2002-01-21 11:38:16 +00:00
f1c55df387
Now that the sppp driver has a payload based timestamp, use that to calculate
...
ISDN timeouts as well. Now LCP echo request/replies won't keep the connection
open any more.
2002-01-06 20:18:19 +00:00
cd66b662e5
Slight stylistic cleanup, no functional change.
2002-01-06 13:26:46 +00:00
99772f59c4
Move net/if_sppp.h to net/if_spppvar.h, create a new net/if_sppp.h
...
containing the userland visible thinks (i.e. ioctl definitions).
Remove all (both) old ioctls, as they had a brain dead API and made keeping
binary compatibility more or less impossible.
Replace by several new ioctls. While there, remove any arbitrary limits
(resulting from the old, broken ioctls) and allow any length of names
and passwords.
2002-01-04 12:21:24 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
4f2ad95259
add RCSIDs
2001-11-13 00:56:55 +00:00
5eb2c7d064
Install i4b_rbch_ioctl.h, it is needed i.e. for userland PPP.
...
Requested by Brian Somers.
2001-10-21 17:02:06 +00:00
456dff6cb8
Spell 'occurred' with two 'r's.
2001-09-16 16:34:23 +00:00
1e378c4c12
precede, not preceed.
2001-08-20 12:00:46 +00:00
47849859a8
Don't allow the size of active diagnostics parameter be bigger than
...
newly added I4B_ACTIVE_DIAGNOSTIC_MAXPARAMLEN (currently 64KB).
2001-08-05 11:16:56 +00:00
125af1e024
bcopy -> memcpy; Nuke bogus local compatibility defines for it.
2001-07-08 10:33:58 +00:00
4d51fe368b
change the meaning of ifnet.if_lastchange to meet RFC1573 ifLastChange.
...
follows BSD/OS practice and ucd-snmp code (FreeBSD does it for specific
interfaces only).
was: if_lastchange get updated on every packet transmission/receipt.
now: if_lastchange get updated when IFF_UP is changed.
2001-06-14 05:44:23 +00:00
83930a016c
Demangle an #ifdef mess and make all ioctl routines take an u_long
...
as the command argument. Before we were subject to subtle sign extension
differences depending on char being signed or unsigned.
2001-04-21 07:23:41 +00:00
3caa4d3f4c
Specify the size of the framing added to packets (in this case: zero), so
...
if_sppsubr.c can calculate correct statistics.
2001-04-09 19:35:46 +00:00
martin