3d8ce73f53
some cleanups and tweaks to my preferred "sh KNF" (SNF ? :)
2003-01-02 23:11:07 +00:00
f9ad379bbd
cd `dirname $0` so that this runs from the directory that build.sh is in.
...
Per discussion with Andrew Brown.
2003-01-02 05:11:12 +00:00
27b32c4276
- Implement "-i installworlddir", which runs
...
make INSTALLWORLDDIR=installworlddir installworld
after every other operation has completed.
If you want to run this target without rebuilding, use -b as well...
- Cache the output of `uname -s` and `uname -m` for future use.
2002-12-25 00:42:50 +00:00
84058abd72
The walnut port has been subsumed by evbppc.
2002-12-09 12:49:55 +00:00
83978b2301
improve message. suggestion from Scott Reynolds
2002-12-09 03:13:41 +00:00
239dc05c4f
Add -E - "expert mode". If this is not specified, builds to DESTDIR=/ are
...
not permitted.
By using this flag, you are taking responsibility for any issues that
may occur because of this...
2002-12-08 22:14:00 +00:00
4f856ef51a
- be consistent about option ordering in build.sh usage display
...
- use Fl and Ar instead of Sy and Em to format options
2002-12-08 08:42:51 +00:00
32615eac46
Apply fixes & enhancements from Alan Barrett. (Thanks Alan!)
...
* When building a kernel with the -k option, make obj in $TOP/etc to
ensure that the correct KERNOBJDIR is created and used. Previously,
KERNOBJDIR could sometimes be an objdir outside the source tree
and sometimes $TOP/sys/arch/$ARCH/compile inside the source tree,
depending on whether or not a complete build had beed done before
the kernel build.
* Renamed KERNCONFNAME to kernconfname, for consistency with what
seems to be a convention that variables local to build.sh (as
opposed to make or environment variables) have lowercase names.
* Renamed the do_buildonlytools and do_buildonlykernel variables to
do_buildtools and do_buildkernel, because the word "only" is no
longer appropriate now that more than one of them can be active
simultaneously.
* Changed a few '|| exit 1' tests to '|| bomb "message"', and added a
few more similar tests.
* Changed all 'echo "===> ..."' to use $runcmd, and added a few more
similar echos. Previously, some used $runcmd and some did not.
2002-11-17 12:59:37 +00:00
6709c26d9f
In the function usage(),
...
- The -n and -t option was missing in sample command line.
- Indent the description of -r option correctly.
- Use `basename $0` instead of $0.
2002-11-05 01:53:58 +00:00
da7aeb45e7
- Add support for ./build.sh -k kern, which configures and builds the named
...
kernel using the $TOOLDIR toolchain. If kern doesn't contain `/', it will
be searched for in ${KERNCONFDIR} (typically, sys/arch/${MACHINE}/conf).
- Improve ./build.sh usage.
- Add some examples to the documentation.
This is heavily based on [toolchain/18739] from Alan Barrett <apb@cequrux.com>,
with improvements by me.
2002-10-20 15:48:01 +00:00
cd51665a0d
Add sh5 cases.
2002-10-02 16:57:29 +00:00
0e750f659f
Remove USE_NEW_TOOLCHAIN, replacing it with similar logic using
...
TOOLCHAIN_MISSING and EXTERNAL_TOOLCHAIN.
2002-09-18 15:20:53 +00:00
c26422231a
* Use /usr/bin/env to invoke the real interpreter. This allows us to
...
get the POSIX shell on more systems.
* Deal with a broken "pwd" on Solaris (suggested by Christos).
2002-09-13 23:27:13 +00:00
c7acd88451
Back out previous; I'll figure out another way.
2002-09-13 22:17:04 +00:00
7db1a04e8c
Use /bin/test explicitly in one place, rather than [ or test (which
...
might be a shell built-in). This allows this script to work otherwise
unchanged with Solaris 8's /bin/sh.
2002-09-13 18:36:01 +00:00
ec793cfe29
Unset PWD so that pwd is guaranteed to return a physical path.
...
This fixes PR 17313. Thanks to Ian Dall for providing the fix.
2002-09-03 22:03:48 +00:00
d1cacc3197
fix pasto in error message
...
reported by Andrew Freedman in toolchain/17530
2002-07-09 06:36:16 +00:00
4234bc92d3
Add hppa as a supported MACHINE_ARCH.
2002-06-10 14:08:05 +00:00
2862ed3546
Remove redundant pattern in case.
2002-06-05 06:27:09 +00:00
82d4bf2f9f
Allow ns32k.
2002-06-05 02:32:15 +00:00
7c929f204a
add armeb as valid MACHINE_ARCH
2002-05-24 14:43:31 +00:00
7d134e662e
add "-M makeobjdirprefix" to build.sh
2002-05-13 01:44:34 +00:00
965e0acae4
Correct BUGS in BUILDING.mdoc now that most ports are USE_NEW_TOOLCHAIN
...
Obsolete NBUILDJOBS; build.sh just passes -jN through to make(1),
which inherits it cooperatively through the build tree. Fix
documentation so that it's shown to be deprecated.
If you use build -jN, please save full build logs so that errors due
to missing dependancies can be analyzed and corrected.
2002-05-02 22:13:30 +00:00
d5a1eec92f
Bomb if share/mk/bsd.own.mk is missing.
2002-04-18 01:38:11 +00:00
0c3d55ef67
Switch remaining ARM ports (acorn32, cats, shark) to ELF.
2002-04-02 16:34:49 +00:00
dc96e428af
Rename arm26 -> acorn26.
2002-03-24 22:21:41 +00:00
19c8da4424
Crank up robustness.
2002-03-21 10:54:50 +00:00
e4732a956b
Add a -B option to set the BUILDID for the build. This also causes
...
the make(1) wrapper script to be named "nbmake-MACHINE-BUILDID".
2002-03-14 18:33:04 +00:00
a79fb9541b
Add evbmips.
...
XXX: This is hard-coded to little-endian here, but there's not reason for
some this. The MALTA can be used with either-endianness.
2002-03-07 14:59:04 +00:00
92ae660710
Add sbmips.
2002-03-06 23:32:52 +00:00
8ea025ea42
Nuke my "mkdirp" hack. "mkdir -p" is used so liberally throughout the
...
tree that the hack is just a maintenance annoyance here.
2002-03-02 03:51:02 +00:00
416ce5ecbb
powerpc is a valid MACHINE_ARCH too.
2002-03-02 02:09:18 +00:00
be05d061b7
Related to PR toolchain/15780, sanity check MACHINE_ARCH.
2002-03-01 21:06:40 +00:00
1e5d325cf1
Related to PR 15781, explain better in a comment why it is not possible
...
to grovel mk.conf using sed/awk/etc. before nbmake is available.
2002-03-01 20:57:26 +00:00
3c68fd62d5
Add mvmeppc to powerpc case.
2002-02-27 21:19:08 +00:00
c17ada6ca5
add -U; set UNPRIVED=
2002-02-27 13:55:28 +00:00
91adf0a52c
Shark is not yet MACHINE_ARCH=arm.
2002-02-10 19:09:13 +00:00
f7d9c1c5ff
s/dnard/shark/
2002-02-10 18:28:12 +00:00
ff243397df
chdir out of $tmpdir before removing it; some vendors' rm(1) programs will
...
not remove cwd....
2002-01-29 08:46:59 +00:00
d7938946ac
Honor HOST_{CC,CFLAGS,CPPFLAGS,LDFLAGS} passed in from the environment
...
when building nbmake. Use the correct defaults if not set (HOST_CC=cc,
HOST_CFLAGS=-O).
2002-01-19 16:49:28 +00:00
a4d805e9d2
Make sure buildmake.sh is run with "sh", rather than depending on executable
...
status. (XXX we should probably come up with a HOST_SH variable for these
instances....)
2002-01-15 19:19:35 +00:00
442feae097
Make use of new make(1) bootstrap in src/tools/make.
2002-01-15 19:17:23 +00:00
caacefb033
Apply workaround for some Bourne shells not handling IFS in the POSIX way.
...
Based on the change suggested by <david@l8s.co.uk> on current-users.
2001-12-19 20:59:07 +00:00
cd1d503ed0
Sort options in usage in default order (AaBb...).
2001-12-17 13:16:10 +00:00
eb0d4b304f
Change check for USE_NEW_TOOLCHAIN to just looking for it being defined.
2001-12-12 23:50:27 +00:00
90d4be2b55
as -m mach is optional, indicate this in the usage
2001-12-11 23:57:49 +00:00
b7c526a551
Honor HOST_LDFLAGS in environment.
...
Add bash to the suggestions of alternative shells if /bin/sh isn't enough.
2001-12-11 21:13:35 +00:00
906700c90b
Revert part of rev. 1.28. DO NOT set MAKE_MACHINE, since "nbmake" is a
...
platform-independent binary. It should have no default. Setting MACHINE
is the purpose of the wrapper script.
2001-12-11 20:45:31 +00:00
a0062bb4ae
Make -t and -u behave together so a -t doesn't always force a cleandir in the
...
tools directory.
2001-12-09 06:07:16 +00:00
b1561d46b2
Check if this platform is supported for USE_NEW_TOOLCHAIN and exit with a
...
complaint if it's not. Point out to run a traditional make and also how to
force a new toolchain build if one wants to test
2001-12-04 04:28:23 +00:00
lukem