Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
75,630 Commits 606 Branches 0 Tags 3.1 GiB
f6dbeb0440
Commit Graph

9409 Commits

Author SHA1 Message Date
explorer
8fcc8721da Put the UQ_ASSUME_CM_OVER_DATA quirk back in. Without it, the Ricochet GS modem fails to work even with the other changes. 2001-01-11 20:35:02 +00:00
jhawk
0d99070cf2 Change wi(4)'s default from ad-hoc mode to BSS mode. Also 
some minor manpage fixes.
 2001-01-11 19:33:51 +00:00
tsutsui
4f8dfdb556 Don't copy Rx packet to mbuf if it has invalid length; just discard it. 
Fixes kern/11877.
 2001-01-11 14:38:58 +00:00
augustss
366e0029a8 Ad ezload attribute for EZ-USB firmware loader. 2001-01-11 13:14:08 +00:00
ichiro
3a755611ac about WI_TIMEOUT: 
It is not enough to initialize NANOSPEED ROOT-RZ2000 WLAN Card.
In fact, this card needs about 66900 counts.
 2001-01-11 11:54:21 +00:00
ichiro
a86eb3e683 NANOSPEED ROOT-RZ2000 WLAN Card work. 
(PRISM II)
 2001-01-11 11:37:54 +00:00
ichiro
c8cf783ce8 regen 2001-01-11 11:33:19 +00:00
ichiro
b7cad127b5 add product 
NANOSPEED ROOT-RZ2000 WLAN Card
 2001-01-11 11:32:56 +00:00
augustss
35e36fee18 Add USSCANNER_DEBUG 2001-01-11 06:33:51 +00:00
augustss
d03f7a8f4b Mention that I found protocol info in the Linux driver. 2001-01-11 06:33:22 +00:00
augustss
7d90b0cb9c Note that I got information about the protocol from the Linux driver. 2001-01-11 06:20:04 +00:00
augustss
4dc9c52505 Add usscanner and uyap. 2001-01-11 06:01:18 +00:00
augustss
8765aa2c42 Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. 
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
 2001-01-11 06:00:31 +00:00
ichiro
35b9cac9d5 regen. 2001-01-10 23:48:54 +00:00
ichiro
263cb744f8 add EMTAC A2424i 11Mbps WLAN Card 2001-01-10 23:47:56 +00:00
martin
8c2f65891f Prefer memory mapping over io mapping for this card too, 
although it doesn't have a chance to work on a no-io system because
of an io based BAR lacking a mem counterpart.
 2001-01-10 21:41:36 +00:00
martin
a42939d604 Make the driver try mapping memory first, the try io. 2001-01-10 20:31:49 +00:00
aymeric
fc0f2f8909 Added four config entries for the DLink DE-650CT. 
XXX I think we should have if_ne_pcmcia.c try to allocate I/O addresses
	around 0x300 or we'll end up with a lot of quirks for NE2k based
	cards which have bad CIS's.
 2001-01-10 17:37:27 +00:00
ad
6b133efd3e Make this work with the SA 431 and 42xx series controllers. 2001-01-10 16:48:04 +00:00
thorpej
3ba997a164 Add the 53c1510d and 53c895a. 1510d confirmed working by 
Mark Davies <mark@MCS.VUW.AC.NZ>.
 2001-01-10 15:50:20 +00:00
tsutsui
6c3ff254ea Get rid of (unintentionally added) ^M. 2001-01-10 14:58:08 +00:00
tsutsui
234840a1ae Initialize the FBC mode register in cg6attach(). 
Values are taken from sunGX.[ch] in xsrc.

Now RASTERCONSOLE works properly on my SS1+ with old 2-slot sbus cg6.
 2001-01-10 13:26:52 +00:00
rh
3d5c5173f5 Add a quirk table for specific implementations. 
Change the NEC-specific subvendor test for GPIO initialization into a more
generic quirk table flag.
Add a quirk flag for hardware that has left and right channels reversed
(currently the COMPAL 38W2 a.k.a. Dell Inspiron 5000e)
Clean up PCM channel initialization and add channel swapping option.
 2001-01-09 23:27:07 +00:00
rh
6ec1759deb regen 2001-01-09 23:20:22 +00:00
rh
ca3478d0e2 Add COMPAL vendor and COMPAL 38W2 product (OEM for Dell Inspiron 5000e) 2001-01-09 23:19:03 +00:00
thorpej
d11cfe3c79 Regen; added Symbios 53c1510D. 2001-01-09 23:16:18 +00:00
thorpej
ff00b6c009 Add Symbios 53c1510D. 2001-01-09 23:15:39 +00:00
rh
cb2d30303b Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right 
mixer channels to be swapped (required for hardware that has wiring
reversed).
 2001-01-09 23:14:25 +00:00
martin
ba45ad64d3 Ifdef some routines only needed for ELSA Quickstep cards when compiling 
without support for those.
 2001-01-09 21:26:30 +00:00
mjacob
442e2e73a9 ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT. 2001-01-09 18:56:24 +00:00
mjacob
64c3b7f881 Add some 2X00 specific state flags for status response entries. Add the 
defines necessary for the REGISTER FC4 TYPE SNS subcommand.
 2001-01-09 18:56:06 +00:00
mjacob
5599d31360 ISPASYNC_PDB_CHANGED->ISPASYNC_LOGGED_INOUT. And also, ISPASYNC_CHANGE_NOTIFY 
is for both local loop and fabric cases now.
 2001-01-09 18:54:53 +00:00
mjacob
81df08ddef Use a SNS REGISTER FC4 TYPE subcommand to register with the name server. 
This means we should be able to work with McData switches now. Change
ISPASYNC_PDB_CHANGED to ISPASYNC_LOGGED_INOUT (more descriptive). Allow
F-Port topologies to use target ids 0..125 to log into fabric devices.
Yet again fool around with defaul WWN stuff.
 2001-01-09 18:54:06 +00:00
ad
1b4eef2721 - Make VDAC state per-board. 
- Add an ioctl to reset the STIC.
- Add an ioctl to restore the screen contents from backing.
- Other tweaks.
 2001-01-09 16:04:03 +00:00
lukem
0ed2fcf9fb *minor* knf 2001-01-09 06:36:13 +00:00
martin
ac6176f581 Fix some oversights from fixing option names. 2001-01-09 00:46:01 +00:00
thorpej
7bebf9a408 On ADMtek chips, don't just idle the chip when programming the 
multicast filter.  These chips don't like to go into "idle" state
very much, so we have to use the big hammer and reset the chip,
instead.
 2001-01-08 22:12:57 +00:00
thorpej
d101f6f462 Add Accton EN2242 10/100 MiniPCI Ethernet. 2001-01-08 21:50:47 +00:00
thorpej
2482ba1fab Regen; added Accton EN2242. 2001-01-08 21:47:38 +00:00
thorpej
3628087824 Add product ID for the Accton EN2242 10/100 Ethernet (an ADMtek AN985). 2001-01-08 21:47:10 +00:00
thorpej
666e82a4e9 Use the AN985 media switch on the AN985. 2001-01-08 21:45:42 +00:00
thorpej
e9bb880aaf The ADMtek AN985 "ghosts" the single built-in PHY at every MII address. 
Work around this by having a custom media init routine that limits the
search to MII address 1.
 2001-01-08 21:40:29 +00:00
thorpej
f9c77ef635 Only build "esm" if it's included in the kernel config file. 2001-01-08 21:16:26 +00:00
augustss
e6616f532a Cosmetic changes. 2001-01-08 20:21:16 +00:00
thorpej
2b00271327 Regen; added DEC SWXCR RAID. 2001-01-08 20:08:17 +00:00
thorpej
18b051656b Add product ID for DEC SWXCR RAID (a Mylex v5 controller). 2001-01-08 20:07:21 +00:00
rh
a3aa8d5abc Add esm audio driver. 2001-01-08 19:55:51 +00:00
rh
ca3b496216 Initial import of the Maestro 2/2e 'esm' PCI audio driver. This driver 
is based on the FreeBSD 'maestro' driver by Taku YAMAMOTO
<taku@cent.saitama-u.ac.jp>
 2001-01-08 19:54:31 +00:00
takemura
757dca55b7 These ioctl commands should be '_IOW' to set value. 
WSMOUSEIO_SRES
  WSMOUSEIO_SSCALE
  WSMOUSEIO_SRATE
 2001-01-08 11:20:24 +00:00
rh
21ea7bd559 regen 2001-01-08 09:53:08 +00:00
rh
48276d65d9 Add IDs for the NEC Versa LX and Versa Pro LX 2001-01-08 09:52:22 +00:00
itojun
9bbe5b85ca "lp" must be defined reagardless from __HAVE_OLD_DISKLABEL 2001-01-08 06:57:21 +00:00
fvdl
d040bd5908 Return error in the case of using ODIOCGDINFO or ODIOCGDEFLABEL when 
the number of partitions is > OLDMAXPARTITIONS. This is better
than silently truncating the label (don't want to silently throw
away partitions when using an old disklabel binary on a label with
> 8 partitions). From Enami Tsugutomo.
 2001-01-08 02:03:45 +00:00
thorpej
b79ddef845 Also ignore receiver errors if VLAN_MTU is enabled; the 21040 appears 
to require this.
 2001-01-07 23:29:12 +00:00
martin
6b82e7fe42 64bit police. 
Rumors say there are archs without ISA busses, so avoid including
(uneccesarily) isa bus headers in MI files.
XXX this is the minimal solution, layer interface calls will have
XXX to be revisited later
 2001-01-07 21:47:24 +00:00
sommerfeld
4522010c18 Make certain we see COM_MPLOCK, MULTIPROCESSOR, and LOCKDEBUG 
to avoid any confusion about whether or not we have a lock in the softc.
 2001-01-07 18:09:26 +00:00
fvdl
e2d1c1f926 Adapt all disk devices in MI directories to handle ODIOC* calls 
for ports that have bumped MAXPARTITIONS (and thus define
__HAVE_OLD_DISKLABEL).
 2001-01-07 18:09:01 +00:00
augustss
6861904096 Regen. 2001-01-07 15:01:06 +00:00
augustss
55c57a573f Add an Altima PHY. 2001-01-07 15:00:46 +00:00
augustss
e90b26477e Regen. 2001-01-07 14:47:00 +00:00
augustss
6d5a1918f8 Add Epson 1640 scanner. (From FreeBSD) 2001-01-07 14:46:31 +00:00
augustss
5b6d98341e Try both the old (wrong) and new SOFT_RESET request type. 2001-01-07 14:26:19 +00:00
martin
218d552c4c Note ISDN devices. 2001-01-07 13:10:54 +00:00
mrg
c5802f9f90 avoid unused variables if not RASTERCONSOLE 2001-01-07 05:41:50 +00:00
nathanw
46b2a2fcd4 Do ess_config_addr() in the ofisa front end, rather than in the match 
routine. Prevents problems with non-SCR ess chips, as described in
PR 11630.
 2001-01-06 22:50:00 +00:00
nathanw
a30debae05 Add description of the pinout of a standard DB-25 parallel port, 
relative to the bits described here.
 2001-01-06 17:16:19 +00:00
takemura
1c518d67a0 Add WDC_CAPABILITY_SINGLE_DRIVE to ignore secound drive. Wdc on pcmcia will 
be attached with this flag.
Some CF Card (for ex. IBM MicroDrive and SanDisk) doesn't seem to implement
drive select command. In this case, you can't eliminate ghost drive properly.
So you should use this flag to ignore the ghost by force.
 2001-01-06 14:55:49 +00:00
augustss
94094c44ab Change debugging output a little. 
Don't the for the wrong id when UMASS_DEBUG is set.
 2001-01-06 12:14:39 +00:00
augustss
f6f8ab2d11 Don't #define UAUDIO_DEBUG here. 2001-01-06 12:12:24 +00:00
martin
4c176b9806 Disable the daic directory for now, it breaks with OBJDIR builds. 
This needs more thought.
 2001-01-05 23:17:48 +00:00
christos
6d92451397 don't keep adding targets, but include bsd.kinc.mk... This time make obj borke. 2001-01-05 20:18:10 +00:00
martin
34875ea7b1 Now let it survive "make install" too. 2001-01-05 19:56:55 +00:00
martin
651aeb5899 don't let "make all" fail 2001-01-05 19:01:02 +00:00
bouyer
69153b6b36 Run at Ultra/66 on VIA controllers that can do it. PCI vendor/device/revision 
is the same for the Ultra/33 and Ultra/66 version, so test writability of
the U66 enable bit (idea from Chris Cappuccio).
Thanks to David Carrel for testings.
 2001-01-05 18:04:42 +00:00
bouyer
cbf42ca2d1 Ops, make it compile again. 2001-01-05 15:34:05 +00:00
bouyer
5c800a0dab Add support for Ultra/100 on intel ICH2; from Tomokazu HARADA in kern/11747. 2001-01-05 15:29:39 +00:00
bouyer
2a63f0a46c Add support for Ultra/100 on the HPT370 
XXX the datasheet for the HPT370 is wrong
While I'm there clear the DRIVE_DMA flag when we're going to use Ultra/DMA
where it was missed, so that wdc_print_modes() only prints what's used.
 2001-01-05 15:20:53 +00:00
martin
242656c78a Enable the imported ISDN4BSD based ISDN subsystem. 
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.

It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").

Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
 2001-01-05 13:09:15 +00:00
martin
c3cb638bca Initial import of ISDN4BSD release 0.96 2001-01-05 12:49:52 +00:00
mjacob
6cb4620b76 (some of these changes were made in the previous revision- oops) 
Say which mailbox command times out (polled or interrupting). Also,
give them a bit more time to timeout (5 seconds instead of 2).
 2001-01-05 07:03:54 +00:00
mjacob
9d7f6e219f Ian McDonnell <apriori@world.std.com> made me see the error of my ways. 
*Cough*. Ahem. I hadn't been setting error to XS_SENSE when there was
a check condition. Major blunder.
 2001-01-05 07:02:00 +00:00
augustss
49f333783f Don't make local defines for stuff that's already in ac97reg.h. 2001-01-05 03:33:39 +00:00
augustss
5f3c3e0d6f Add definitions for some bits in ID and STATUS regs. 2001-01-05 03:32:46 +00:00
augustss
cc9f003455 Add some codecs. 2001-01-05 03:32:11 +00:00
bouyer
4dc117d433 Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed. 
Thanks to Bernd Ernesti for pointing this out.
 2001-01-04 11:34:27 +00:00
veego
3e63d458f0 Use COM_FREQ for COM part of the last commited entry. 
Why are there other drivers here which have PUC_PORT_TYPE_COM but don't
use COM_FREQ or even don't have the extra field?
 2001-01-04 08:49:31 +00:00
veego
17718db1b9 Add support for boards with an Oxford Semiconductor chip. 
This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and
1 parallel ports.
XXX We need to move the PCI IDs to pcidevs.
 2001-01-04 08:43:21 +00:00
mycroft
f73703a4a6 Set the play and record parameters separately. 
If the device is unidirectional, just ignore parameters in the other direction.
(XXX We need a better way of dealing with this.)
Only set curaltidx if we're setting usemode.
This makes both the Altec Lansing speaker set and the Telex bidirectional frob
work again.
 2001-01-04 07:05:00 +00:00
mycroft
c142ce184b Several things: 
* Only match an alternate which is in the same direction.
* Use 16-bit ulaw and alaw conversions for output, if possible.
* Store the interface handle in the `alternate' table, so we use the right
  interface when creating pipes for devices with both play and record.
Record doesn't seem to actually return any data from the Telex frob, but at
least it doesn't crash or return EIO now.

XXXXXXXX
This is a big f*cking hack.  Play and record need to be separated completely
if this code is ever going to even pretend to support full duplex.
 2001-01-04 06:20:49 +00:00
mycroft
6ff81e44ec No really, this is half-duplex for now. Lame. 2001-01-04 05:25:24 +00:00
mycroft
ab1d9b87b0 Make some vague attempt to handle devices that do both input and output. This 
probably needs more work, but at least my Telex frob can play music now.
Also, AUDIO_DEBUG -> UAUDIO_DEBUG.
 2001-01-04 03:53:09 +00:00
enami
25481ad786 Redo previous; we need to notify kbd driver. 2001-01-04 01:33:37 +00:00
mycroft
29ecdf4b0c Regen. 2001-01-03 23:15:14 +00:00
mycroft
cbfa3ad17d Add Chrysalis-ITS LunaVPN card. 2001-01-03 23:14:39 +00:00
enami
62a4aefda9 Avoid null pointer dereference so that boot -d works again. 2001-01-03 23:03:45 +00:00
enami
7eab063a4f Use device_lookup. 2001-01-03 23:00:24 +00:00
ad
a06fc2bf4b Fix thinko in previous. 2001-01-03 21:17:05 +00:00
ad
5fcbd5f722 - Fix a number of bugs with the configuration stuff. 
- Bash the passthrough interface into working order.
- Add an ioctl to retrieve the `tidmap'.
 2001-01-03 21:04:01 +00:00
ad
8494f44b67 Make dumps work, and put the first part of detach into ld.c. 2001-01-03 21:01:28 +00:00
bouyer
286f4f934f Add a 'flag' member to struct puc_attach_args and struct port. For 
PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits
to 0, used for real flags if needed).
Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM.
Add support for the VScom PCI-800H 8 port serial adapter (which uses
a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :)
XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800
entry could probably be updated to DTRT - does anyone have one ?
 2001-01-03 15:13:15 +00:00
augustss
c2b9d052ba Cosmetics. 2001-01-02 23:08:54 +00:00
augustss
3ea054452a Add placeholder for firmware. 2001-01-02 22:38:51 +00:00
augustss
0e9ef4adc0 Forgotten commit for EZ-USB loader. 2001-01-02 22:24:00 +00:00
augustss
32e4d7004e Add a transient driver for the YAP phone that downloads firmware into 
the EZ-USB chip.  After downloading the firmware the device detaches
and then reattaches as a composite device (audio + HID).

XXX For now there is no firmware committed since the vendor (Silicon
XXX Portals) has not yet agreed that we can redistribute their firmware.
 2001-01-02 18:52:44 +00:00
augustss
5b86e8bfa8 Add subroutines to download firmware into Cypress (formerly Anchor) 
EZ-USB chips.
 2001-01-02 18:49:56 +00:00
augustss
f586756bcf Regen. 2001-01-02 09:53:16 +00:00
augustss
d3fd188459 Add a new TI hub chip. 2001-01-02 09:52:55 +00:00
mrg
d9a9b8d6d5 the tcds cards work in pmaxen. move tcds attachment to files.tc. leave asc 
at tcds in files.alpha for now, and add a new `xasc at tcds' to files.pmax.
after pmax has moved fully to MI scsi (and `asc' is MI scsi), we should move
the device asc, etc., lines to files.tc.
 2001-01-01 23:43:05 +00:00
ad
c29358e0f9 Don't try to configure `uninteresting' devices. 2001-01-01 19:03:30 +00:00
augustss
8afb11bb20 Don't match on a bunch of scanners that should be handled by a 
different driver.
 2001-01-01 18:52:05 +00:00
augustss
47c95db1c3 Regen. 2001-01-01 18:51:08 +00:00
augustss
f33102e85d Add another scanner. 2001-01-01 18:50:42 +00:00
augustss
5806434428 Call vdevgone() with correct minor range. 2001-01-01 18:34:12 +00:00
augustss
2f1e60b46c Support device detach. 
Don't call scanjet_attach() for all HP scanners.
Also, ANSIfy while I'm here.
 2001-01-01 18:28:49 +00:00
ad
2f5cf27275 PR 6402: some SCSI devices use \377 as blank, so adjust scsipi_strvis(). 2000-12-31 17:54:29 +00:00
augustss
9a52f80f0f Make the controller survive suspend/resume. Thanks to Steve Woodford 
<steve@mctavish.co.uk> for testing.
 2000-12-31 14:29:54 +00:00
ad
196d40d973 Regen. 2000-12-31 14:04:26 +00:00
ad
fb04e415dd Fix Mylex products. 2000-12-31 14:03:24 +00:00
ragge
9bbf84e4ca Changes for dzkbd/dzms. This is not yet finished, but at least the 
kernel is useable.
 2000-12-30 22:11:46 +00:00
mjacob
462ff196a4 [ dummy checkin to add to previous CVS ] 
It's probably not really a compiler bug- somebody pointed out
that it was the kernel making strings readonly. But I do think it's
a bug. The actual code was really more like:

	char *revname;

	...

	revname = "2X00";

	...
	revname[1] = '2'; <<<<<<<<< BOOOM


The variable revname is not a const. If I had said

	const char *revname = "2X00"
	...
	revname[1] = '2';

that would indeed be breaking const rules.
 2000-12-30 19:47:20 +00:00
mjacob
8adadc9bda There's a compiler bug for sparc64 that makes the construct: 
char *foo = "XXXX";
	...
	foo[1] = 'Y';

blow up (in the kernel) with the 2nd assignment. Work around it here-
it's probably just as well- I was spending more in cpu instructions doing
the assignment than I was saving in string space (it would have been
cheap on a pdp11 or a 68k- but the address loads and assignments on something
like sparc or alpha way outweigh the savings in space. Tsk.).
 2000-12-30 19:30:09 +00:00
wiz
1a40e855c8 Undo pci_intr_map change in non-NetBSD part of the file. 2000-12-30 17:02:53 +00:00
wiz
1796fa4bd8 Fix pasto in comment. 2000-12-30 16:55:24 +00:00
wiz
2ad3fd958d Merge 2.18 to trunk. 2000-12-30 16:52:36 +00:00
mjacob
c6b9ad5aeb Use bootverbose to now set whether or not we add 
ISP_LOGCONFIG and ISP_LOGINFO messages into the
default logging mask.
 2000-12-30 08:49:11 +00:00
castor
02d83a4c77 Fix PR port-hpcmips/11477 "only hpcmips panics with wireless network cards" 
Adjust the payload of receive mbufs so the data following the
ethernet header is aligned.
 2000-12-30 07:57:52 +00:00
sato
a2fe1adf2a for calling sc->sc_acessops->pollc, 
use wsdisplay_cd.cd_devs[unit] in accessing wsdisplay_softc
instead of casting pointer.
XXX: i compiled it in i386, hpcmips, alpha.
 2000-12-30 05:38:50 +00:00
eeh
804add680f Regen. 2000-12-30 04:39:03 +00:00
eeh
6cfa6f67c1 Fix typo. 2000-12-30 04:38:02 +00:00
eeh
44f785d4cd Add Sun psycho bus controller. 2000-12-30 04:34:51 +00:00
mjacob
e5482757b5 Fix at least alpha kernel builds. You can't pun a pointer to a dev_t on 
alpha. This is also a bad idea. I really don't know the ws code at all
or I would just fix the whole issue.
 2000-12-30 02:58:42 +00:00
sato
9785bf0526 notify console polling mode or not to lower level framebuffer driver. 
notify EMUL mode or not to lower level framebuffer driver.
these may use framebuffer level hardware acceleration/software optimization.
 2000-12-30 01:41:51 +00:00
augustss
2c65dfb9b5 Be less talkative in attach. 2000-12-30 00:37:24 +00:00
tsutsui
b1cf284bd6 s/AP0_UDMA_MASK/APO_UDMA_MASK/ 2000-12-29 18:59:01 +00:00
eeh
60edf7be2c Add a bus type for psycho controllers. 2000-12-29 17:15:04 +00:00
augustss
271adbd54e Try to get rounding right when setting mixer values. 2000-12-29 14:49:28 +00:00
augustss
560f4a2254 Set the mixer delta field. 2000-12-29 13:28:41 +00:00
augustss
b85fdbbc47 Add a field in mixer_devinfo_t that indicates the minimum delta to 
change mixer value.  A value of 0 indicates that the driver doesn't
supply a delta.
The change is backwards compatible.
 2000-12-29 10:00:08 +00:00
augustss
34ee8a0f06 Supply our own report descriptor (from Nick Hibma) for the Wacom Graphire. 
The descriptor it reports is broken.
XXX Not tested, because I don't have the device.
 2000-12-29 01:47:49 +00:00
augustss
79f0bd6e1f Update many URLs. 2000-12-29 01:24:55 +00:00
augustss
e9853f047a Update location of specs. 2000-12-29 01:14:15 +00:00
sommerfeld
851de295eb Change pci_intr_map to get interrupt source information from a "struct 
pci_attach_args *" instead of from four separate parameters which in
all cases were extracted from the same "struct pci_attach_args".

This both simplifies the driver api, and allows for alternate PCI
interrupt mapping schemes, such as one using the tables described in
the Intel Multiprocessor Spec which describe interrupt wirings for
devices behind pci-pci bridges based on the device's location rather
the bridge's location.

Tested on alpha and i386; welcome to 1.5Q
 2000-12-28 22:59:06 +00:00
mjacob
d4c32f2a63 Apply nearly all of Bill Sommerfeld's -Wformat patches. The one 
change I didn't take is the %llu format- I can't have a common
across multiple platform module assume a %ll argument capability-
which really pointed out that I shouldn't be trying to *print*
something which could long long.
 2000-12-28 22:27:46 +00:00
mjacob
3823efc25a Apply Bill Sommerfeld's -Wformat changes. 2000-12-28 22:23:41 +00:00
mjacob
0dae1b3d9a Turn ISP_LOCK/ISP_UNLOCK into ISP_ILOCK/ISP_IUNLOCK macros for routines 
that are driven from a timeout (oops, they're on the interrupt stack).
 2000-12-28 21:37:04 +00:00
augustss
20d1ae1adb Add two more quirks: 
UQ_AU_NO_FRAC for audio devices that cannot handle adjustment for fractional
    sample size.
  UQ_AU_INP_ASYNC for input devices that claim to be adaptive, but are in fact
    asynchronous (an easy mistake to make unless you read the specs carefully :)
 2000-12-28 11:56:22 +00:00
augustss
1e0da50daa Regen. 2000-12-28 11:53:25 +00:00
augustss
bdcc0b7ad1 Add device no for YAP phone with firmware loaded. 2000-12-28 11:53:01 +00:00
augustss
4dbac77503 #define for USB_2_0 2000-12-28 10:40:36 +00:00
mjacob
8493d154d1 roll to 2.01.26 f/w 2000-12-28 08:30:40 +00:00
mjacob
d81d268d13 Use the ISP_CFG_NOINIT flag to decide whether to complete the full init 
process steps (this is used in some platforms where you want to bring
the adapter to ready (to get a WWN, e.g.) , but not engage either target
or initiator mode until some later time). Set the correct defaults WWNs.
 2000-12-28 08:26:12 +00:00
mjacob
a5498e1514 add an ISP_CFG_NOINIT flag 2000-12-28 08:24:17 +00:00
mjacob
b551237fb6 add two minor ATIO2 offsets 2000-12-28 08:23:48 +00:00
mjacob
829a533bfb Restore the change fvdl made. Sorry about not noticing it. The 
header (about 'Maintainer') is supposed to help encourage folks
to coordinate with me.
 2000-12-28 08:11:52 +00:00
augustss
5236b76556 Make message about ignored endpoint a little clearer. 2000-12-28 01:01:42 +00:00
augustss
d2098567fe Add audio terminal types. 2000-12-28 00:29:58 +00:00
tsutsui
59fcebab05 Regen. (Fix Acard UDMA IDE) 2000-12-27 15:36:42 +00:00
tsutsui
72347b9f8b Fix entries of Acard UDMA IDE controllers. 2000-12-27 15:32:33 +00:00
sato
4e15bd1d3a add Novac PCMCIA-IDE Card(Card for HD530P PCMCIA-IDE Box). 
No vendor ID, no product ID, and the wpp_cis_info is 'PCMCIA', 'PnPIDE'.
 2000-12-27 10:41:00 +00:00
augustss
bd1b9290e5 Regen. 2000-12-27 04:16:19 +00:00
augustss
96a684549d Add a VIA chipset and Nvidia GeForce2 MX. 2000-12-27 04:15:53 +00:00
mycroft
a6fe4b78f2 Um, we need rnd.h so that cs_softc is defined properly. Overrunning structures 
is bad.
NOTE: #IFDEF IN SOFTC DEFINITIONS IS BAD.
 2000-12-26 09:42:21 +00:00
jmc
5b7fb2728a Back out changes from 1.124 since the additions of *ports.master=-1 wasn't 
documented as to why it was added in and it breaks the ability to set the
gain on playback. A longer term fix to set these correctly should be done but
none of the drivers today are doing this and not being able to set the playback
volume otherwise is a bit silly.
 2000-12-25 00:01:39 +00:00
augustss
19c0d40186 Even stubs need improvements. 2000-12-24 06:42:34 +00:00
augustss
63fbac9a7d Add some placeholders for the EHCI (USB 2) driver. 
Don't get your hopes up.  I've not even finished reading the
(100+) page spec, and I have no hardware.
 2000-12-24 06:39:01 +00:00
bjh21
a48c9194bb Print the newline after the memory test. This makes it clear that the delay's 
related to this driver rather than the next device to be attached.
 2000-12-23 16:37:20 +00:00
bjh21
690a8dbae1 fix typo: sigmips -> sgimips 2000-12-23 13:41:33 +00:00
bjh21
d925692c76 Add arm26 fpu. 2000-12-23 13:40:21 +00:00
tsutsui
aa223e5bce Regen. (Adding Acard UDMA IDE controllers) 2000-12-23 10:13:20 +00:00
tsutsui
cf4a7f824c Add Acard UDMA IDE controllers. 2000-12-23 10:11:55 +00:00
wiz
c8b0b91e7e Fix pathnames in comment. 2000-12-23 01:37:57 +00:00
ad
024d36d353 - Fix bugs, make this useful. 
- Add ioctls to start and stop the co-processor (if present).
 2000-12-22 13:30:32 +00:00
onoe
2079f9d276 improve an_cmd() slightly: 
- strip unnecessary loop to get command result status
- ack command after clearing busy bit

XXX: it still sometimes get timeout to get status(0xff50) or statistics(0xff68)
     probably due to heavy load of firmware in receiving.
 2000-12-21 15:37:18 +00:00
onoe
4ee7a7cdcd use pcmcia_devinfo() to print product info. 2000-12-21 15:32:46 +00:00
mycroft
e2ef1b88bb Disable the 16-bit I/O space hack for ALL PROMISE CONTROLLERS. 
This code is TOTALLY BROKEN and causes a NULL POINTER DEREFERENCE whenever it
is fired.
 2000-12-21 01:19:24 +00:00
onoe
c6607f2fef move definition of AN_INTRS from anreg.h to anvar.h 
strip off AN_EV_CMD from AN_INTRS because it causes severe performance
problem.
 2000-12-20 23:30:36 +00:00
bjh21
35a8d9d1b4 eh, podloader 2000-12-20 21:17:35 +00:00
thorpej
e3d7d246bb Fix a debugging clause missed when fixing full-duplex support. 
Noted by Wolfgang Rupprecht.
 2000-12-20 21:06:41 +00:00
briggs
9a73f8b22b Make _sure_ that we do not use selatn3 when it is not present. Fixes a 
problem on pmax reported by Izumi Tsutsui.  Tested also on alpha and mac68k.
 2000-12-20 15:49:03 +00:00
aymeric
e08387765d The key below <escape> is now ~ (KS_asciitilde) when shifted in the 
french layout.
This is consistent with the XFree layout, and is very convenient.
 2000-12-20 14:53:18 +00:00
haya
22be9ab855 Add IO Data CBIDE2 ata interface card. 2000-12-20 09:56:34 +00:00
haya
5f8d27d58b regen. 2000-12-20 06:24:37 +00:00
haya
f899f18228 Add IO Data CBIDE2 ata interface card. 2000-12-20 06:05:13 +00:00
sommerfeld
824092cc68 Regen, because jhawk didn't 2000-12-20 05:03:37 +00:00
jhawk
391d469a00 Backout most of 1.46, because Jason checked in a load of crap from 
his local tree that doesn't build with -current...
 2000-12-20 04:36:26 +00:00
jhawk
6cca4087d9 s/NULL}/NULL }/ 
Did I mention this awk script really sucks?
 2000-12-20 04:32:48 +00:00
eeh
d1ab475964 Make the driver negotiate sync again and remove some (hopefully) superfluous 
DELAY()s.
 2000-12-20 03:19:34 +00:00
thorpej
814729d3ae Regen. 2000-12-19 17:11:38 +00:00
thorpej
d4bbed68f8 " " -> "&sp" in two entries, per Rafal Boni. 2000-12-19 17:11:22 +00:00
thorpej
54e034de88 Identify the SMC 2632W as a Prism II. From Rafal Boni, kern/11776. 2000-12-19 16:55:57 +00:00
thorpej
ef0031e520 Regen; add SMC 2632W. 2000-12-19 16:54:14 +00:00
thorpej
0ca5cacc47 Add SMC 2632W. From Rafal Boni, kern/11775. 2000-12-19 16:53:41 +00:00
pk
c6bd81f8a6 Fix reversed logic when setting setting sync-negotiation ability flag 2000-12-19 14:08:17 +00:00
nisimura
b3345434e4 Fix an error in xoffset calculation. Revealed in the case when 
ri_width is less than ri_stride and screen is layouted RI_CENTERed.
 2000-12-19 09:52:53 +00:00
onoe
684fe5613d cleanup attach procedure, use tsleep() instead of long delay (and ignore 
timeouts).
stop driver after suspend.
XXX: should use command interrupt but no document...
XXX: status update sometimes failed perhaps due to collision.
	(RID 0xff50 or 0xff68 access failed)
 2000-12-19 08:00:55 +00:00
mycroft
045091aa8f Add a big comment in the previous section of code... 2000-12-19 06:23:26 +00:00
mycroft
463d0e577e Back out previous change. 
I removed this once before a long time ago, because it's wrong and breaks
PCMCIA on some machines.  It also doesn't fix the Multia problems.
 2000-12-19 06:04:02 +00:00
eeh
0db43ad6ce Kill extra "attached" message. 2000-12-19 04:36:05 +00:00
onoe
f9af49b21b I've inverted the logic of an_probe() in my previous commit to dev/ic/an.c 2000-12-19 01:59:21 +00:00
perseant
3475e639f3 Add register #defines similar to those in <dev/pci/tgareg.h>, referring to 
a 32-bit sfb_reg_t, for easy comparison between tga and sfb Xservers.
 2000-12-19 01:25:46 +00:00