lukem
a687c7deac
pull up stuff changed in GENERIC from 1.370 - 1.377, appropriately
...
commented out if it's not relevant to a laptop
2000-11-18 02:08:30 +00:00
jdolecek
97669de104
make i386_nocpuid_cpus[] and i386_cpuid_cpus[] const - this pushes
...
another ~1.4KB to text section
2000-11-16 17:00:17 +00:00
jdolecek
def6d1b4ac
Newer Intel PIII processors also make available Brand ID value through
...
cpuid instruction, which is used to differentiate between Celeron, common PIII
and PIII Xeon; recognize it and print appropriate info if applicable
Information taken from Intel's (R)
Intel Processor Identification and the CPUID Instruction, AP-485
2000-11-16 10:19:02 +00:00
jdolecek
a9ad986a90
Update cpuid table according to information sent by Scott Telford
...
in port-i386/11502, with only sligh change for Coppermine entry -
cpus with family 6, model 8 are not all Celerons, they can be
either common PIII, Xeon or Celeron
2000-11-16 09:06:17 +00:00
jdolecek
ea9f7ed6d5
introduce SIGACTION_PS() macro - this is similar to SIGACTION(), but works
...
for (struct sigacts *) instead of (struct proc *)
2000-11-15 21:13:58 +00:00
thorpej
9298fd52fc
Garbage-collect some more stuff.
2000-11-15 19:30:10 +00:00
enami
038ca0a146
Make isa_machdep.c compile again.
2000-11-15 02:00:31 +00:00
enami
1ef516e9be
Pull in uvm_extern for PAGE_SIZE.
2000-11-15 01:59:35 +00:00
thorpej
990d23039d
NBPG -> PAGE_SIZE.
2000-11-14 22:55:51 +00:00
thorpej
ec0069dd37
NBPG -> PAGE_SIZE
2000-11-14 22:55:05 +00:00
augustss
eb9736c09a
Add uscanner.
2000-11-14 19:52:04 +00:00
thorpej
10b31e1ebc
The i386 page size is fixed -- override PAGE_SIZE, et al, so that they
...
are compile-time constants.
2000-11-14 18:01:54 +00:00
jdolecek
ec93c3dd25
when evaluating CPU speed, make the wait 0.1s instead of 1s - the accuracy
...
difference is like 0.008% on my system and the delay is now almost unnoticable:)
Discussed with Jason Thorpe, Frank van den Linden.
2000-11-13 16:40:40 +00:00
enami
ce78591ae1
Cometic change; keep the code to process a second hunk closer to the first one.
2000-11-10 04:00:25 +00:00
enami
390c8adfbc
Don't start next iteration while processing a first memory hunk since
...
there may be a second hunk.
2000-11-10 03:58:15 +00:00
christos
0cf0dd1b80
put the suggestion message in uvm_page.c. There could be other reasons
...
why we are not able to find the end of memory.
2000-11-09 19:22:30 +00:00
kim
534a2fa4bb
BIOS memory loading messages can be enabled with DEBUG_MEMLOAD.
...
Increase VM_PHYSSEG_MAX from 3 to 5 to avoid a panic. Suggest
increasing VM_PHYSSEG_MAX in the panic message.
2000-11-09 17:34:51 +00:00
ad
33c21c5f16
Sort.
2000-11-08 21:47:25 +00:00
ad
36e51ea5c5
Add I2O stuff.
2000-11-08 19:50:07 +00:00
ad
e6be92ad99
Pull in dev/i2o/files.i2o.
2000-11-08 19:48:51 +00:00
thorpej
5929990d15
Add `bktr'.
2000-11-07 06:02:24 +00:00
augustss
a00e309252
Fix speeling in cooment.
2000-11-06 22:10:03 +00:00
augustss
83bdca3a71
Print a newline after the random number speed message.
2000-11-06 22:01:31 +00:00
thorpej
c60d6ae15b
Machine pmc.h
2000-11-05 22:28:00 +00:00
thorpej
fa03f6e74d
If we have a working cycle counter, compute the number of CPU
...
cycles in a second, and print the CPU speed.
Derived from similar code in FreeBSD.
2000-11-05 22:10:01 +00:00
onoe
e83458422f
First Prototype implementation of network interface part for IEEE1394 (if_fw).
...
Current status:
Only OHCI chip is supported (fwohci).
ping (IPv4) works with Sony's implementation (SmartConnect) on Win98.
sometimes works but not stable.
Not implemented yet:
IRM (Isochronous Resource Manager) functionality.
Link layer fragmentation.
Topology map.
More to do:
clean ups
MCAP
charactor device part
dhcp
There is no entry in GENERIC config file yet.
Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 17:17:12 +00:00
thorpej
584c0d1319
Use <dev/sysmon/sysmonconf.h>
2000-11-05 04:08:48 +00:00
thorpej
f6099127b7
DELPHI -- one of my devel machines at Zembu Labs. This is an
...
example of how to configure the PC-Weasel driver into the kernel.
2000-11-05 03:51:14 +00:00
ad
3d193b190b
- Pequr -> Serverworks. It pays to do a cvs update first...
...
- Pay attention only to the low byte of config reg 0x44 on Serverworks chips,
as Linux does.
- Compress duplicatated code.
2000-11-03 17:28:02 +00:00
thorpej
7c2615290b
Add support for MS-DOS file system, but don't enable it by
...
default -- the resulting binary is too large, and thus does
not work.
2000-11-02 01:02:07 +00:00
eeh
8c3f6a0d10
Adapt to new line discipline scheme.
2000-11-02 00:37:56 +00:00
mycroft
9572bf6261
These are incredibly out of date.
2000-11-01 07:58:42 +00:00
fvdl
69e9b0392f
Sync INSTALL with GENERIC and INSTALL_LAPTOP with GENERIC_LAPTOP with
...
regard to wireless network interfaces and pcic iomem size (i.e.
bump iomem to 0x1000 and enable cnw, awi and ray).
2000-10-31 15:54:50 +00:00
lukem
b14a596beb
Add support for booting off RAIDframe RAID1 mirrors. Check the first partition
...
type in biosdiskopen(), and if it is of type FS_RAID, add 64 to d->b_off.
NOTE: installboot(8) still needs some hacking to DTRT, but at least this way
if you can load "/boot" off another partition (e.g, wd0h), then wd0a can be
of type `RAID' with a raidframe mirror at the start and the kernel
will load OK of wd0a, and with raidctl -A root partitions, it will change
root as well.
2000-10-30 07:30:59 +00:00
thorpej
10203d4eca
Change the RNG callout -- don't spin until data is available. If
...
none is available, just wait until the next clock tick.
2000-10-30 00:26:04 +00:00
simonb
bb33bb331d
Fix NRND == 0 case (unused variable).
2000-10-28 13:30:35 +00:00
itojun
5bbd7d495e
fix busy-wait logic against random number register. (missing semicolon)
2000-10-28 04:58:35 +00:00
enami
31ac87f602
Don't use memory map of no entry. Instead, fallback into old way.
...
This fixes one of ``can't find end of memory'' panic on startup.
2000-10-28 02:29:35 +00:00
thorpej
3c01d4cbca
Add support for sampling the random number generator on
...
the 810, 815, 820, and 840 chipsets. From OpenBSD, modified
for NetBSD by me.
2000-10-27 22:49:21 +00:00
thorpej
7f59704e6c
Support the second PCI bus on SeverWorks chipsets. From OpenBSD.
2000-10-27 17:55:18 +00:00
thorpej
2644e830b7
BIOS BUG WORKAROUND! The 82443BX datasheet indicates that the only legal
...
setting for the "Idle/Pipeline DRAM Leadoff Timing (IPLDT)" parameter
(bits 9:8) is 01. Unfortunately, some BIOSs do not set these bits properly.
Based on a hint from OpenBSD.
2000-10-27 17:47:44 +00:00
thorpej
d05f0929dc
We only support Intel PMCs for now, so don't try and read them
...
on non-Intel CPUs.
2000-10-24 22:03:36 +00:00
fvdl
dfcc2820fa
Add rtk at pci, some laptops have it.
...
Add cardbus network cards to INSTALL_LAPTOP (oops, they're largely
the point of INSTALL_LAPTOP..).
From Noriyuki Soda.
2000-10-23 09:31:49 +00:00
ad
15e25fe73f
- ca -> lsu
...
- Hook in twe.
2000-10-19 14:32:20 +00:00
wiz
c374cadf43
Get RELEASEDIR setting from /etc/mk.conf. Fixes misc/11104 by Markus Kurek.
2000-10-15 22:42:49 +00:00
minoura
7bb188de0c
WSCONS_DEFAULT_TYPE is obsolete; use VGA_CONSOLE_SCREENTYPE instead.
2000-10-15 10:08:00 +00:00
hpeyerl
87a8c94ed0
Sanity check the cursor position read from the 6845 and if clearly
...
off-screen, set it to 0x0. From dean@huxley.org .
2000-10-12 22:36:30 +00:00
thorpej
3290ef5fe8
Re-order the TLB operations in pmap_zero_page() and
...
pmap_zero_page_uncached(). This seems to prevent the
lossage with those functions people have seen on Cyrix
CPUs.
2000-10-08 22:59:38 +00:00
thorpej
87a787f7b4
Make sure we use kvtopte() only on kernel addresses. Should
...
fix a panic that occurs when using KGDB repored by Nathan Williams.
2000-10-06 18:37:39 +00:00
abs
2824f4906d
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
...
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
2000-10-02 18:43:34 +00:00