flush routine during startup. XXX: I have absolutely no idea where
this managed to pick up DCACHE_SIZE from before.
closes port-evbarm/33276 by Peter Postma
requested by uwe@. These were wrong because they were receiving an
emulcookie yet they were accessops (thus having to receive an accesscookie).
Instead, just handle the WSDISPLAYIO_{GET,PUT}WSCHAR ioctls from the
driver's ioctl accessop.
As this reduces the amount of code needed to handle these operations to
two small functions in each driver, remove the WSDISPLAY_CHARFUNCS kernel
option.
Reviewed by, at least, uwe@ and macallan@. No objections in tech-kern@.
to the screen on which they are being called. The driver cannot guess
this by itself but it is needed to implement, at least, the getwschar and
putwschar functions in the correct place. There are no functional changes
yet.
Tested on i386 (vga, vga_raster, machfb, vesafb), macppc and sparc64.
Suggested and reviewed by macallan@.
The NSLU2 (Network Storage Link for USB 2.0 Disk Drives) is a small, *cheap*
NAS device consisting of an Intel IXP420 (Xscale) CPU, a 10/100mbit Ethernet
port, and two USB 2.0 ports. It has 32MB of SDRAM and 8MB of Flash memory,
and runs RedBoot/Linux out of the box. Now it can also run NetBSD.
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
and always call the simple_* locking functions. the locking functions
are compiled out if they are not needed anyway, so a separate option
for this doesn't gain anything.
this also fixes the serial console on my alpha ES40 (which doesn't make much
sense since the com driver should still be under the big lock on alpha,
but whatever).
and others to avoid providing PCI I/O space at address 0.
Iyonix, however, needs to provide PCI I/O space at 0.
The others require I/O space to be offset in part due to a bug
work-around in wm(4) which requires that I/O space access be used
to reset the controllers. If I/O space is mapped at zero, the card
claims, but ignores, the transactions, and the controller doesn't
get reset properly and can't then be used.
