RSYNC_HOST
specify rsync host (default: rsync.NetBSD.org)
RSYNC_PATH_PREFIX
specify extra prefix path of NetBSD module names for rsync mirrors
ex. "/pub", "/netbsd" etc. (default: empty)
DAILY_DIR
specify directory name on using NetBSD-daily snapshot for -current
ex. "200712060002Z" etc. (no default; mandatory for -current)
RELEASE_SUFFIX
specify suffix of directory names used for pre-releases
ex. "_BETA2", "_RC5" etc. (default: empty)
RSYNC_PATH
specify path used to rsync hosts (default: set from the above variables)
Examples:
make RELEASE=3.1 TARGET_CD_IMAGE=mac68kcd fetch
-> fetch 3.1 mac68k sets from
rsync.NetBSD.org:/NetBSD/NetBSD-3.1/
make RELEASE=4.0 TARGET_CD_IMAGE=mac68kcd RELEASE_SUFFIX=_RC5 fetch
-> fetch 4.0_RC5 mac68k sets from
rsync.NetBSD.org:/NetBSD/NetBSD-4.0_RC5/
make RELEASE=current TARGET_CD_IMAGE=mac68kcd DAILY_DIR=200712060002Z fetch
-> fetch -current mac68k sets from
rsync.NetBSD.org:/NetBSD-daily/HEAD/200712060002Z/
make RELEASE=4.0 TARGET_CD_IMAGE=mac68kcd RELEASE_SUFFIX=_RC5 \
RSYNC_HOST=rsync3.jp.NetBSD.org RSYNC_PATH_PREFIX=/pub fetch
-> fetch 4.0_RC5 mac68k sets from
rsync3.jp.NetBSD.org:/pub/NetBSD/NetBSD-4.0_RC5/
make RELEASE=3.1 TARGET_CD_IMAGE=mac68kcd \
RSYNC_PATH=/NetBSD-daily/netbsd-3/200712060002Z fetch
-> fetch mac68k sets of netbsd-3 branch from
rsync.NetBSD.org:/pub/NetBSD-daily/netbsd-3/200712060002Z
("dd if=/dev/zero bs=512 count=0" seems to cause unexpected results)
- use ${TOOL_STAT} to get file size instead of ls and awk
(1.6.x don't have ${TOOL_STAT} but they have been obsolete anyway)
Both are taken from sys/arch/i386/stand/bootxx/Makefile.bootxx.
Use x86 native boot for current.
Swap i386 and amd64 in multiarch CD sets (cd1 would overflow by 30M otherwise)
and leave vax out (cd3 would overflow by more than 100M - time for a
multi-cd4 ?)
- introduce SGIMIPS_SGIVOL variable which specifies sgivol(8) path
because nbsgivol tool is available only in TOOLDIR for sgimips and
possibly exists in a different directory from default TOOLDIR path
- use fixed (4096) value for SGIVOLHDR.size because default value
taken from <sys/bootblock.h> is 3135 (not multiples of 4) so it
doesn't match 2048bytes/sector CD images
- also pass SGIVOLHDR.size to sgivol(8) on creating volume
- rename raw iso9660 image before creating SGIVOLHDR to avoid
incomplete (non-bootable) image left on failure of sgivol(8)
Problem (i.e. sgimipscd-3.0.2.iso is not bootable) was reported
by Thierry Lacoste on port-sgimips, and fixed images are also
tested by him on IP22 (and by me on IP32).
on (some) OpenFirmware 2.x machines.
Current macppccd.iso image doesn't boot on Openfirmware 2.x
(and probably 1.0.5) machines because it uses pre-compiled binary
which is based on old (and customized) bootxx.
It causes version mismatch against newer ofwboot whose load address
has been changed from 0x600000 to 0xe00000, as mentioned in the
following post:
http://mail-index.netbsd.org/port-macppc/2004/12/14/0020.html
There was also an raw binary which was passed to mkisofs as -boot-hfs-file.
To fix these issue, prepare a simple mkhfsboot program which creates
a boothfs file with the Apple partition map info for mkisofs,
and modify macppc_installboot to search the secondary ofwboot from isofs
and to put and modify the primary bootxx accordingly.
See PR toolchain/30245 for more details.
There are still some machines which don't boot from an iso image created
by this method (G3 machines with OF 2.0f1 etc.), but it's still better
than to keep ugly and obsolete hacks.
Ok'ed by macallan, and there is no other particular comment about this PR.
The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.
* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.
With help from abs.
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC
For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo
Document all of these in bsd.README.
This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.
instead, keep uuencoded versions in the repository.
(arguably /usr/sbin/installboot -m macppc should support -t cd9660,
at which point we'd nuke this macppc_installboot hack)
- when building RSYNC_INCLUDE, only add a directory once
- automatically add `shared/ALL' and `shared/${MACHINE_ARCH}' to
${BASE_PORTS.${image}} for each unique MACHINE_ARCH in the latter.
- don't bother explicitly listing shared/* in the example
- note that the cats cdrom is now bootable
alpha installboot still needs to come after everything else, because non of
the other installboot(8) backends support recalculating the alpha checksum
(yet).
only populate the stage area with the minimal necessary files and use
"mkisofs -graft-points -path-list pathlistfile", and populate pathlistfile
with the "reachover" paths.
IMPORTANT NOTE:
This change requires mkisofs 1.15a34 or newer for a working
-graft-points option.
This can be found in the cdrecord-devel 1.11a34 package.
Don't fetch by default; the rsync is resource intensive on rsync.netbsd.org
and is often unnecessary. Deprecate NO_FETCH whilst here.
Use "make fetch" explicitly...
Explicitly add ${RELEASENAME} to RSYNC_SITE (and remove it from all
the other rsync options), and deprecate ${RELEASE_SUBDIR}
Add some # { and # } comments, to make it easier to track make(1)
conditionals & loops.
- access mksunbootcd via ${NETBSDSRCDIR}/... && ${PRINTOBJDIR}
- use ${INSTALLBOOT} for alpha,pmax,vax instead of /sys/arch/*/stand/...
- use ${.CURDIR}/macppc_installboot to access macppcboot.raw
rough at this point, and needs more fleshing out in several areas. Does not
yet do packages or check for the existence of support programs--to be fixed.
tsutsui