0: No output. Default for mount_mfs unless -N specified
1: Output size of partition and cylinder groups.
2: Follow with a progress-bar line of dots (scaled to finish at RH margin)
3: Include a single line of alternate suberblock addresses before progress
bar. Default for newfs.
4: Output lots of lines of alternate superblock numbers that scroll madly
up the screen.
If -N given, newfs/mount_mfs exits before displaying any progress bar.
Output constrained (almost always) to 1 column less than the terminal width.
were full then not enough bits were left for the inode allocation map.
Always put a multiple of 8 fragments (and non-zero) inodes into the eqns
so that answer is correct.
Fix the sum that may discard the last cylinder group if it isn't large enough
to contain all its inodes.
Spotted during some other tests, eg:
$ newfs -s 109610 -n1 -f512 -b4096 -N -O2 -F ./z
CGSIZE miscalculated 4097 > 4096
$
big filesystems can have thousands of them - no one ever writes them down.
After the first line of numbers just output a '.' for each cylinder group.
Also limit the lines to 79 columns so broken terminal emulaters don't
double-space the output lines.
table. Useful if the disk has remapping drivers installed into it (such as
Ontrack Disk Manager).
Added as an option instead of automatic behavior to let the user scan any
of the two partition tables at will.
We can now delete an entry from the tables using
veriexecctl delete /path/to/file
or remove an entire table using
veriexecctl delete /mount_point
(any directory will work for the mount point it's on)
In particular the 'read' part plays 'hunt the disklabel' in order to get a
label into a local buffer - from where it can be displayed/edited.
The 'write' part makes a separate scan of the disk looking for places to
write the label.
The main changes are:
- It can no longer write the first 8k of the mbr to the pbr (or v.v.)
- All labels on the disk (that it can find) get updated during a write
- With -A all the labels are displayed (inc. those deleted by -D)
- Addition of -D which will delete (by one's complimenting dk_magic{2}) and
existing labels before writing labels to the expected locations.
- -v gives some verbose output to stderr, -vv more etc
A better basis for processing incorrect endian labels, or labels from other
architectures.
This closes a hole pointed out by Thor Lancelot Simon on tech-kern ~3
years ago.
The problem was with running binaries from remote storage, where our
kernel (and Veriexec) has no control over any changes to files.
An attacker could, after the fingerprint has been verified and
program loaded to memory, inject malicious code into the backing
store on the remote storage, followed by a forced flush, causing
a page-in of the malicious data from backing store, bypassing
integrity checks.
Initial implementation by Brett Lymn.
link points to the process's current working directory, and the root
link points to the process's root directory. What else would you
expect?
For directories that are out of reach (caller is in a chroot, target
process is in a different chroot, etc), the links point to "/"
instead.
tmpfs' "API" and was already rotting.
Instead, merge all the relevant comments into the code. This includes
acknowledgements to Google's Summer of Code 2005 program (they were in the
AUTHORS section of tmpfs(9) before), so all the files need to be changed
to include this sentence alongside the title. (Note that this was not a
requirement of the program.)
- Remove all NFS related stuff from file system specific code.
- Drop the vfs_checkexp hook and generalize it in the new nfs_check_export
function, thus removing redundancy from all file systems.
- Move all NFS export-related stuff from kern/vfs_subr.c to the new
file sys/nfs/nfs_export.c. The former was becoming large and its code
is always compiled, regardless of the build options. Using the latter,
the code is only compiled in when NFSSERVER is enabled. While doing this,
also make some functions in nfs_subs.c conditional to NFSSERVER.
- Add a new command in nfssvc(2), called NFSSVC_SETEXPORTSLIST, that takes a
path and a set of export entries. At the moment it can only clear the
exports list or append entries, one by one, but it is done in a way that
allows setting the whole set of entries atomically in the future (see the
comment in mountd_set_exports_list or in doc/TODO).
- Change mountd(8) to use the nfssvc(2) system call instead of mount(2) so
that it becomes file system agnostic. In fact, all this whole thing was
done to remove a 'XXX' block from this utility!
- Change the mount*, newfs and fsck* userland utilities to not deal with NFS
exports initialization; done internally by the kernel when initializing
the NFS support for each file system.
- Implement an interface for VFS (called VFS hooks) so that several kernel
subsystems can run arbitrary code upon receipt of specific VFS events.
At the moment, this only provides support for unmount and is used to
destroy NFS exports lists from the file systems being unmounted, though it
has room for extension.
Thanks go to yamt@, chs@, thorpej@, wrstuden@ and others for their comments
and advice in the development of this patch.
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.
The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.
Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.
OK'ed by my project mentor, William Studenmund (wrstuden@).
killing self, instead of the other way around.
Fixes a bug where the child process would use 100% CPU spinning
while it waited for its parent to arm a non-existent watchdog timer.
Now, the child process gets killed, as was intended.
+ style (KNF).
. don't cast NULL
. white space clean up
+ use consistent format for error messages.
+ plug memory leaks and avoid malloc(0).
+ verbose message should display even when routing table is empty
(flushroutes).
opendisk() declared in that file is not used in this case anyway, and
<util.h> pulls in unwatned includes (e.g. <utmpx.h> doesn't exist on
FreeBSD 4.*).
getlabel{offset,sector} and opendisk functions declared in that file
are not used in this case anyway, and <util.h> pulls in unwatned
includes (e.g. <utmpx.h> doesn't exist on FreeBSD 4.*).
XXX: We can probably undo the #if !HAVE_NBTOOL_CONFIG_H kludge in
<util.h> now.
family is unset. Either the destination or interface address socket address
family value is used. This change prevents the following sort of output:
RTM_NEWADDR: address being added to iface: len 60, metric 0, flags:<UP>
sockaddrs: <NETMASK,IFA,BRD>
(0) 00.00.ff.00.00 127.0.0.1 127.0.0.1
With this change the last line becomes:
255.0.0.0 127.0.0.1 127.0.0.1
Also make sure that when using a generated inet netmask the address family
is set. With this change a generated netmask will print appropriately
when using the verbose (-v) option.
like the following work as expected.
#!/bin/sh
if ! route -sn get default >/dev/null 2>&1; then
echo default gateway not set
exit 1
fi
echo default gateway set
Handle routing socket write(2) errors when they occur. This produces
better diagnostics by allowing for handling of the special route errno
values ESRCH, EBUSY, and ENOBUFS even with the quiet (-q) option or
when doing a get command.
<ufs/lfs/lfs.h> before including the second of them, and also after
including the second, to ensure the rest of the code doesn't depend
on their (ambigious) definition.
This fixes a build problem for vax; gcc 2.95.3's preprocessor
apparently doesn't like redefinition of macros.
Discussed with xtraeme.
- Verified Exec -> Veriexec
- pseudo-device is `veriexec'
- veriexec.conf -> signatures, and mention /etc/signatures as the default
location
- We use veriexec's strict level, not the system securelevel
- Mention the `direct' option
- Mention that the signatures file can have multiple options in a single
entry, comma-separated
- Mention that both `direct' and `indirect' access modes are implied
if no access modes are explicitly mention in the options
- Bump date
routing socket, e.g. running route flush as non-root.
* When quiet (-q) don't append error string to a non-existent
diagnostic output (stdout). The error diagnostic is still written
to stderr. [from FreeBSD]
* Use warn(3) in place of perror(3).
simonb