5d1e8b2745
Fix some typos.
2006-02-25 02:28:55 +00:00
5a25538485
fix byteswap of log revision structure check, improve error printout
2005-11-29 08:47:22 +00:00
1aeda8c1bc
add newline termination on error message
2005-11-29 08:06:13 +00:00
2c6eadc9ce
Move WARNS=3 to the Makefile.inc, and add a little const to the remaining
...
programs that did not compile before.
2005-06-27 01:00:04 +00:00
5c35c1667a
Improve formatting.
2005-04-12 11:50:29 +00:00
e69243d0ea
document the "security" command
2005-04-12 11:41:14 +00:00
48eac6e41a
Implement a "security" command with subcommands to query the status of
...
the "security" extension and to "freeze" it. With the security extension
frozen, disk passwords cannot be set anymore, until the next hard reset.
Normally, this is the business of the BIOS, but older/buggy/embedded
BIOSes don't care. This leaves the (theoretical) possibility that a
malicious program in posession of superuser rights sets a disk password,
rendering the disk useless (or at least uneconomical to recover from).
Inspired by an article in the german "ct" magazine.
Being here, consolidate the implementations of IDENTIFY into one, and
fix an obvious alignment problem.
2005-04-12 11:40:46 +00:00
76500fc2f9
WARNS=2 is the default defined in sbin/Makefile.inc. (thanks wiz)
2005-01-20 16:39:22 +00:00
743ce43fbc
Kill __P(), remove main() prototype; WARNS=2
2005-01-20 15:36:02 +00:00
72e5ae587b
Add missing SMART attribute (6, Read channel margin)
2005-01-17 13:00:32 +00:00
08d19d088d
* don't swap the WDSMART_CYL value, it isn't needed
...
* swap the 16- and 32 bit fields of the SMART structures (where used)
Makes SMART commands work on big-endian systems.
2004-11-17 15:40:50 +00:00
67bfa4e06f
Bump date for "offline" description.
2004-10-10 09:45:10 +00:00
d353df2fed
Add offline command to usage() and man page.
2004-10-08 18:53:42 +00:00
82f913eae9
Combine the listing of enabled/disabled features with the general listing of
...
features.
Add an "smart error-log" command to display the SMART error-log.
Add an "offline" command to run offline selftests.
2004-10-08 17:19:50 +00:00
4ed261aea9
Add a couple cross-references to make similar ctl commands easier to find.
2004-09-16 18:02:27 +00:00
d96c6bad93
Add some more attribute "names", taken from
...
http://freepgs.com/smart/attributes.php
which gets them from smartmontools as maintained by Bruce Allen.
Note that some of these attributes should be "named" differently
depending on the drive (point for future work?), but at least now
there are names for some of the one that were missing them.
2004-09-10 04:11:09 +00:00
2a3ef0e821
White space police
2004-09-10 03:43:52 +00:00
2e3cdda09c
No leading zeroes in date string.
2004-08-02 23:16:02 +00:00
502e9c8209
Add infrastructure for ATA bus commands, and implement the reset bus command.
2004-08-01 21:41:49 +00:00
7f2778f63a
Print the raw SMART values always. These are important in a bunch of cases --
...
e.g. for the load cycle count and power-cycle count.
Also, consistently treat the raw values as unsigned.
2004-03-28 01:23:15 +00:00
4fdf521f76
It's extension, not extention. From Miod Vallat (miod at online fr).
2004-03-14 20:11:24 +00:00
b635f565e7
Homogenize usage messages: make the 'usage' word all lowercase, as this seems
...
to be the most common practice in our tree.
2004-01-05 23:23:32 +00:00
683cebe2c8
No longer need to include <dev/ic/wdcreg.h>
2003-12-30 19:30:39 +00:00
a443960167
Don't need to include atavar.h
2003-12-30 19:12:35 +00:00
43ac17e0cf
Extend SMART status to print temperature. Add support for printing
...
selftest log (but no code it start selftest yet).
2003-12-20 20:03:20 +00:00
020176e538
display more capabilities for "identify" command.
2003-11-30 14:07:49 +00:00
a8930c059a
Fix various uses of NULL that should have been 0.
2003-10-21 02:30:03 +00:00
c2a3b5ec84
Add NetBSD RCS Ids.
2003-06-23 11:53:35 +00:00
2fb4b1db52
New sentence, new line. By Robert Elz with minimal fixes.
2002-10-01 13:40:23 +00:00
654deed34e
Allow the enable command if SMART is not enabled. Duh.
...
Also, just blindly allow the disable command.
2002-09-13 18:31:41 +00:00
1f8cf74815
Typo.
2002-08-15 19:17:04 +00:00
b916651e58
Correct the check for whether SMART is enabled.
2002-08-15 18:57:51 +00:00
1cbfe6af00
Print symbolic names for SMART STATUS attributes.
2002-08-06 01:16:56 +00:00
7553d4030f
Ispell. Drop .Pp before .Sh.
2002-08-06 00:44:36 +00:00
1cc6ec32e5
s/smart info/smart status/ to better fit in with the standard's feature set.
2002-08-06 00:00:21 +00:00
9e129fde67
Add ATA SMART reporting support from Ben Collver in kern/12787.
2002-08-05 23:29:27 +00:00
80d1ff493a
Sort sections.
2001-11-16 11:21:37 +00:00
3d18c18669
Use the command set/feature *enabled* words when displaying what
...
command sets and features are enabled.
2001-09-07 16:33:50 +00:00
cdcbbc115b
ANSIfy.
2001-09-07 02:17:30 +00:00
3839890ed7
errx() prints the newline for you.
2001-08-28 15:36:54 +00:00
73f545bb5b
Drop arguments of .Os.
2001-06-05 11:22:41 +00:00
8a986b2e96
convert to use getprogname()
2001-02-19 22:48:57 +00:00
9979da6cbb
Format string cleanups by Bill Sommerfeld.
2000-10-10 20:24:49 +00:00
7101b4c03f
Back out previous two - didn't follow the code properly.
2000-07-13 11:24:40 +00:00
08d4945681
Fix previous. From Micheal Eriksson <eramore@era-t.ericsson.se>.
2000-07-13 11:19:54 +00:00
92cca24f4e
printf fmt string without %s, from OpenBSD.
2000-07-06 14:01:06 +00:00
c8057468ec
fix typo: he -> the
2000-03-01 16:45:22 +00:00
7c282714fa
Fix typo.
1999-11-01 02:30:58 +00:00
94872b2ccd
Sync with scsictl: rearrange usage() and print list of commands.
1999-10-29 23:07:43 +00:00
6129fbed1e
Fix pastos.
1999-10-19 10:35:37 +00:00
wiz