* Rename "config.h" to "nbtool_config.h" and
HAVE_CONFIG_H to HAVE_NBTOOL_CONFIG_H.
This makes in more obvious in the source when we're using
tools/compat/config.h versus "standard autoconf" config.h
* Consistently move the inclusion of nbtool_config.h to before
<sys/cdefs.h> so that the former can provide __RCSID() (et al),
and there's no need to protect those macros any more.
These changes should make it easier to "tool-ify" a program by adding:
#if HAVE_NBTOOL_CONFIG_H
#include "nbtool_config.h"
#endif
to the top of the source files (for the general case).
first three bytes to determine how much of the BPB to preserve.
Supported values:
eb 3c 90 FAT16 BPB
eb 58 90 FAT32 BPB
(anything else) don't preserve any BPB
This is because the BPB is generally only the FAT16 one except in the
bootxx_msdos case, where it's the larger FAT32 one.
<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.
As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.
<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).
amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.
* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).
* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.
* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.
* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.
* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.
installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)
mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.
Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).
all the options have been processed that they are supported my the
specific system.
Add i386 MD options (console, password, speed and timeout)
(Approved by christos and lukem)
bbinfo.c module; news* boot blocks occupy all of the first 16 sectors,
with a jump instruction to skip the label at bytes 64..511.
Replace news_clearboot() and news_setboot() callbacks with common
news_copydisklable() callback, and set bbinfo_params->offset to
NEWS_BOOT_BLOCK_OFFSET (which is now 0), and ->headeroffset to 0.
(Thanks to Izumi for picking this up; the perils of working on code at 2am)
- bbinfo_params:
- replace "int littleendian" with "bbinfo_endian endian"
- add comments
- shared_bbinfo_clearboot():
- add callback method to shared_bbinfo_clearboot()
- don't clear from 0..headeroffset; use a callback to do that
- add news68k and newsmips support.
From Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>, with a rework by me to
take advantage of the new shared_bbinfo_clearboot() callback.
(XXX: untested yet)
- unify sparc_bbinfo (1064 bytes, with 256 block entries)
and sun68k_bbinfo (296 byte, with 64 block entries)
into shared_bbinfo (512 bytes, with 118 block entries),
which will be also shared by future bbinfo-using platforms
(including macppc)
- add datestamp to *_BBINFO_MAGIC strings, to prevent installboot vs
bootxx version skew.
- add macppc support
*/bootxx.c:
- migrate to new shared_bbinfo structure
installboot:
- add macppc support (still needs applepartmap support and testing)
- improve and add some more warnings & errors to installboot
- implement shared_bbinfo_clearboot() and shared_bbinfo_setboot(), which
perform the majority of the work for bbinfo-using back-ends
(rather than replicating that across multiple back-ends).
- unify sparc_bbinfo (1064 bytes, with 256 block entries)
and sun68k_bbinfo (296 byte, with 64 block entries)
into shared_bbinfo (512 bytes, with 118 block entries),
which will be also shared by future bbinfo-using platforms
(including macppc)
- add datestamp to *_BBINFO_MAGIC strings, to prevent installboot vs
bootxx version skew.
- add macppc support
*/bootxx.c:
- migrate to new shared_bbinfo structure
installboot:
- add macppc support (still needs applepartmap support and testing)
- improve and add some more warnings & errors to installboot
- implement shared_bbinfo_clearboot() and shared_bbinfo_setboot(), which
perform the majority of the work for bbinfo-using back-ends
(rather than replicating that across multiple back-ends).
and use instead of replicating the effort in various locations
- if filesystem is not a regular file, use sync(2) instead of fsync(2)
after the bootstrap has been written
- move <sys/stat.h> and <stdint.h> into "installboot.h"
- add `-B s2bno', to provide the starting block for the secondary bootstrap.
intended for use on platforms where the blocks of the stage2 bootstrap
are hardcoded into the stage1 bootstrap (currently: sparc, sun2)
- don't support `-b s1bno' for sparc or sun2, since the primary is always
at a fixed location on the disk.
- if `filesystem' is a regular file, use fsync(2) instead of sync(2)
code changes:
- add hardcode_stage2(), which uses -B s2bno and the size of the
provided secondary bootstrap (as an actual file, not as part of the
`filesystem' argument) to provide a sequential list of blocks from s2bno,
each block being the appropriate file system size (from
params->fstype->blocksize)
- add blocksize and needswap run-time parameters to ib_fs
- in *_match(), set params->fstype->blocksize to the underlying block size
(8KB for raw), and params->fstype->needswap as appropriate
- rename IB_STARTBLOCK to IB_STAGE1START, and add IB_STAGE2START
- use hardcode_stage2() to implement raw_findstage2() and IB_STAGE2BLOCK
support for ffs_findstage2()
- improve some comments, add some prototypes, ...
lukem