d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
546bda740f
Revert to using <bsd.prog.mk> again, so we support all targets that may
...
be presented when building the system (noticed by Juergen Hannken-Illjes).
2000-02-26 11:48:15 +00:00
ecf1c1eb21
Add auxiotwo (Tadpole 3GX aux 2 register) entry.
2000-02-25 18:24:40 +00:00
7840960350
Driver for Tadpole 3GX "Power Down Control (Aux 2) Register".
...
Based on existing auxreg.[ch] (Sparc Aux Register driver).
2000-02-25 18:17:24 +00:00
9bbc61deaa
We need <bsd.obj.mk>.
2000-02-25 16:53:22 +00:00
c64db6cec7
Remove out-dated comment.
2000-02-25 16:02:49 +00:00
8f03b9a04a
Define the DONETISR macro and use netisr_dispatch.h. This is to cut down on code duplication and to standardize the available NETISRs across all ports.
2000-02-21 20:38:46 +00:00
dd6a9d86b0
SUN_BOOTPARAM compile-time option is no longer used.
2000-02-21 15:13:11 +00:00
f89828d99f
bootxx links at 0x340000
...
2nd-stage boot programs choices: 0x200000,0x300000,0x400000,0x700000 (default: 0x300000)
2000-02-21 15:07:32 +00:00
ea0dbfe79c
RELOC -> RELOC_DEFAULT
2000-02-21 14:44:18 +00:00
8305907589
Build several versions of the second-stage boot program, each linked
...
to run at a different base address. Boot image build procedures can
pick one which is least likely to fail..
The default boot program is again build to run at 0x340000.
2000-02-21 14:41:22 +00:00
52014b23c5
Allow second-stage boot program to be specified on the command line.
2000-02-15 16:15:07 +00:00
59742052ea
Determine base address at run time.
2000-02-15 14:09:59 +00:00
9bb753bb2e
Nuke unused code.
2000-02-15 12:18:05 +00:00
fd8c03cf44
Allow arch-specific code to specify in4_cksum() like it can specify
...
in_cksum().
2000-02-14 21:42:50 +00:00
72252544f5
remove `flags' from sun4 zs declarations; the driver doesn't use it.
2000-02-14 18:08:38 +00:00
5b285d9509
Just skip matching the `slave' property against `cf_unit'.
2000-02-14 18:07:37 +00:00
19533212a5
Correct comments on KGDB_* entries.
2000-02-12 12:59:36 +00:00
b518dc6dfc
Eliminate much of the goo in setting up zs device addressing.
2000-02-12 12:51:03 +00:00
dded044fc2
Update for the NKMEMPAGES changes.
2000-02-11 19:25:12 +00:00
7f5a7c00ac
fix include file.
...
<netinet6/ip6.h> -> <netinet/ip6.h>
2000-02-09 05:48:26 +00:00
bc1ca7aa3f
Add a bunch of debugging code, #ifdef FPU_DEBUG, which attempts to
...
trap FPU usage in the kernel.
2000-02-08 03:16:00 +00:00
1d46ce41ea
Enable the hme ethernet driver.
2000-02-07 21:24:48 +00:00
fe551f0e64
Fix a bug in disksort_*() which caused non-optimal ordering when multiple
...
active partitions were on a single spindle. Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
2000-02-07 20:16:47 +00:00
de608f33e1
Don't use PROM the virtual address (if any) for the device registers;
...
they are not reliably mapped. Also, unmap registers if the device
cannot be configured properly.
2000-02-07 11:44:15 +00:00
36e6bc645e
Improve namespace test macros a bit.
2000-02-05 14:04:36 +00:00
b527153dd7
Ensure uniqueness of EEPROM device without reference to cf_unit.
2000-02-05 12:32:57 +00:00
7d16ac338c
add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very
...
wrong things with device configuration data "cf_unit" information.
2000-02-05 00:13:22 +00:00
82464e46d6
Add a C99-style va_copy macro.
2000-02-03 16:16:06 +00:00
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
f77befbc84
#define __HAVE_DEVICE_REGISTER on ports that have it, and check for
...
that, rather than a list of architecture defines, in config_attach
2000-02-01 04:01:19 +00:00
00ba4de9e2
Add `si' and `sw' controllers to device_register() tables.
2000-01-31 15:08:25 +00:00
26944f9bf6
Add bpp (parallel port) device.
2000-01-28 16:08:52 +00:00
8b07bf2245
standard nomencature: bp -> bh
2000-01-28 15:47:18 +00:00
a5d6b10bad
fdcstatus() formatting.
2000-01-28 15:46:20 +00:00
2f0be0855f
pv_unlink4m: correctly clear the PV_ANC flag. Noted by Artur Grabowski.
2000-01-28 13:06:02 +00:00
b0fbaa33fb
Remove obsoleted macros.
2000-01-26 09:44:10 +00:00
cfc246f9d8
Don't explode when we've got a lot of RAM. Limit our space for buffers
...
to 1/4 of the kernel VM map.
2000-01-26 07:35:51 +00:00
8eb798e603
define a "BUS_SPACE_MAP_PREFETCHABLE" flag which basically means that
...
device accesses are idempotent (but should not be cached by the CPU)
2000-01-25 22:13:17 +00:00
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
9cfc74c312
Report write-protected disks.
2000-01-24 16:52:02 +00:00
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
18ad190b10
* b_cylin -> b_cylinder; deals with PR9283.
...
* a few optimizations & misc. style updates.
2000-01-23 22:19:12 +00:00
7b49d242ce
Clean up the machine symlink stuff ever so slightly. Needs to be
...
standardized between files.
2000-01-23 17:04:03 +00:00
d76bf6c906
Try both the BOOTPARAMS and BOOTP protocol (in that order). This also
...
takes care of PR#8738.
2000-01-22 12:34:57 +00:00
52242fdf9f
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:28:59 +00:00
df99dfd934
Simplify toggling the FTP bit on sun4m machines.
2000-01-21 13:25:12 +00:00
252d47729f
Update FDC offsets used by fdintr.s
2000-01-21 13:24:06 +00:00
6b2ebb44a7
Move several PIL_* definitions into the scope of LOCORE stuff.
2000-01-21 13:22:55 +00:00
f8ac5484fa
Medium sized code overhaul:
...
* Improve communication between the `hard' and `soft' interrupt handlers
to better distinguish various interrupt sources.
* Eliminate several race conditions where we would set a time out handler
only after starting the command on the hardware.
* Handle most timeouts by resetting the controller; there isn't much chance
of recovery in any other way. Currently, the exception is a timeout
on I/O, in which case we first try to pulse the controller's TC line
in order to abort the pseudo-dma sequence. Apparently, "normal"
conditions can induce such a timeout when there's no disk in the drive.
* Reduce the formatting gap parameter to 0x54.
* On the obio bus, interpret the `status' attribute.
* Minimize console diagnostic output if the errors we get appear to be
caused by the absence of a disk.
2000-01-21 13:22:01 +00:00
oster