3406f0a3dd
The "gif*" tunnelling interface does everything ipip does.
...
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.
2002-03-04 13:24:06 +00:00
35abec3c31
Add -Os and -mcpu=i486 to COPTS. Add VNODE_OP_NOINLINE.
2002-03-01 23:42:20 +00:00
1addb1955a
Default to telling the MI PCI code that rd/line, rd/mult, and wr/inv
...
commands are OK.
2002-02-28 21:48:05 +00:00
f711992b7f
Add options GATEWAY.
2002-02-28 17:54:56 +00:00
4324f37586
Use "#define<tab>".
2002-02-28 03:17:23 +00:00
e8116a8f5b
- Use DEV_ constants, instead of documenting the numbers!
...
- Delete cdev_decl(mm); where appropriate, and other hand-crufting [hi powerpc!]
2002-02-27 01:20:51 +00:00
6b030ee036
- define other DEV_ constants that the local port uses.
...
- delete cdev_decl(mm) since <sys/conf.h> does it.
2002-02-27 01:19:03 +00:00
f876e538ae
Add options (commented out) for disabling power hooks on the pms and pmsi
...
PS/2 mouse drivers.
2002-02-27 00:31:12 +00:00
d9ab16ba2f
Purge CLSIZE, CLSIZELOG2 and MCLOFSET.
...
Be consistant in the way that MSIZE, MCLSHIFT, MCLBYTES and NMBCLUSTERS
are defined.
Remove old VM constants from cesfic port.
Bump MSIZE to 256 on mipsco (the only one that wasn't already 256).
2002-02-26 15:13:19 +00:00
ca1294612c
Remove some globals defined in libsa.
2002-02-24 01:51:04 +00:00
75533175a2
Rename to NET4501.
2002-02-20 07:19:50 +00:00
889d3fedd3
Sample kernel configuration for a Soekris Engineering net4501
...
single board computer.
2002-02-20 03:15:35 +00:00
f777763ab3
* Rename the pxeboot binary from "pxeboot" to "pxeboot_ia32", since
...
there are other architectures (e.g. IA64) which also use PXE.
* Get the console right in pxeboot, from Andreas Gustafsson.
* Add a "com0" version of pxeboot, to address the same issue that
biosboot_com0 addresses.
2002-02-20 03:00:27 +00:00
825d4ec152
Increase the reset delay in ex_reset() as per dev/ic/elinkxl.c
...
Pointed out by Love <lha@stacken.kth.se>
2002-02-19 20:38:28 +00:00
dfeaa108c4
Add some comments to make some #if/#else/#endif's more clear.
2002-02-19 20:18:36 +00:00
8545d4115b
Put the netif driver name in the version banner.
2002-02-19 19:55:01 +00:00
1ecb20dd3b
Move the individual NIC ROM Makefiles into a subdirectories of
...
netboot. Requested by Christos.
2002-02-19 19:49:37 +00:00
37e458fa45
strategy should have an 'r'. Inspired by similar change in OpenBSD.
2002-02-19 17:09:40 +00:00
2d8577fb83
Clean up some rampant code duplication wrt ieee number handling:
...
- Add alignment-safe double and float unions.
- Use the above for the __infinity and __nan constants on all
architectures that use the standard ieee754 representation of
those constants.
- Add a single copy of various ieee754 math functions (frexp, isinf,
isnan, ldexp and modf) that had numerous duplicates among the
arch-specific directories.
- Use the above functions on all architectures where the generic C
versions where used. Architectures that had local assembly
routines are untouched (for those functions only).
2002-02-19 13:08:12 +00:00
bf6823b1b5
Don't ask bootp() to put a "PXEClient" Vendor Class Identifier option
...
in the DHCP request.
2002-02-18 17:01:46 +00:00
b5e0d320af
Fix a null pointer dereference if curproc == NULL.
...
Fixes PR port-i386/15638.
2002-02-18 15:58:02 +00:00
77fa5a7974
Pay attention to the file name provided by the DHCP server, using
...
it rather than the default of "netbsd" if it's in the reply.
2002-02-17 20:14:08 +00:00
76ea45942b
Cleanup of i386 bootloader building:
...
* Add separate directories for the individual netboot ROMs and
always build them.
* Each bootloader Makefile explicitly specifies the start file
and link address it wishes to use.
* genprom becomes a proper host program.
* Make sure all generated files get cleaned up.
* Set BINDIR in Makefile.inc
* Add compressed image support to pxeboot.
* Make pxeboot use the default serial console speed (9600).
2002-02-17 20:03:05 +00:00
45f23105c2
Make this compile again (update for changes to register bit names).
2002-02-17 19:49:58 +00:00
bb1c9c42fa
Update for new location of the WD80x3 register description.
2002-02-17 19:47:41 +00:00
49cec2b141
* Remove a debug-breakpoint that is no longer needed.
...
* Move the pxe_init() call to when we open the virtual netif.
* Make sure to call pxe_fini() when we close the virtual netif.
2002-02-16 16:52:10 +00:00
0aec9f6508
Need private copies of these files for now.
2002-02-16 16:26:23 +00:00
c8e246669c
save cr2 for the benefit of linux emulation, and normalize use of pcb
...
in trap(), i.e. always initialize *pcb and use it instead of doing it
sometimes.
2002-02-16 16:22:03 +00:00
a7986989e7
Improve on fault signal translation. Inspired largely by Robert V. Baron's
...
wabi patch.
2002-02-16 05:19:26 +00:00
8bb2be2987
Add a PXE boot loader. PXE interface code is derived by code
...
written by Alfred Perlstein, Paul Saab, John Baldwin for FreeBSD.
Still needs some work, but this will load a kernel on a Soekris net4501.
Many thanks to Frank van der Linden and his simulator wizardry for
helping me debug the low-level startup code.
2002-02-16 03:37:39 +00:00
382c2e0513
Add a bunch of PNP ID strings that are apparantly for the ESS chips.
...
Snarfed from a Microsoft document.
2002-02-15 22:06:50 +00:00
b744097a5f
allow writing to write-only mappings. fixes PR 3493.
2002-02-14 07:08:02 +00:00
3cc2ef9997
Update description for icsphy.
2002-02-10 17:36:52 +00:00
a7ff227011
Wups, forgot to add it to some other kernel configs as well.
2002-02-08 01:49:33 +00:00
f7c49dc7e6
Add another pcic at isa attachment. This enables the top PCMCIA slot on
...
my AST Ascentia 910N, and closes port-i386/11797
2002-02-08 01:47:59 +00:00
e716d57285
Don't spew so much to the console without DEBUG.
2002-02-07 23:23:29 +00:00
104f7c34d6
joyvar.h is now at <dev/ic/joyvar.h>
2002-02-06 21:32:16 +00:00
2e56fbc7e0
Another <tab> -> <sp><tab> noted by Patrick Welche.
2002-02-06 19:58:02 +00:00
fe2fc5699c
Fix the bcea redefinition issue in a different way: instead
...
of removing the duplicate variables, make sure that any duplicate
variable that has an initial value in libsa also has an initial
value here; this keeps the linker from pulling in the libsa
definition.
2002-02-02 18:53:12 +00:00
f32b3f4f89
Reduce the massive code duplication regarding joy(4). Split it into
...
MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.
2002-02-02 18:37:38 +00:00
706b8b345a
Do '<sp><tab>' instead of '<tab>' for some RAID options.
...
Noted by Patrick Welche in private mail.
2002-02-01 15:17:04 +00:00
d47da1254f
Fix comments.
2002-01-31 17:41:38 +00:00
7ea0ddda43
- fix hex constant in transmeta code to fit 32 bits.
...
- char assignment should be '\0'
- factor out some common strings
2002-01-31 17:40:51 +00:00
7da411d63b
Look for _PIR in addition to $PIR. My libretto L2 now works without
...
any other kludges.
2002-01-28 23:53:08 +00:00
ec18ceb107
Keep adv in alphabetical order.
2002-01-28 01:23:32 +00:00
6d265bd894
add options PIPE_SOCKETPAIR to individual kernel configs
...
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines
2002-01-27 13:23:08 +00:00
d69be53e42
Add entries for the 'esa at pci' audio driver (ESS Allegro-1 / Maestro-3).
2002-01-24 20:19:46 +00:00
17abb81d69
One more change resulting from my GDT rearrangement... Since GMACHCALLS_SEL
...
is always defined now, don't use that to test if we should install the MACH
compat gate; test COMPAT_MACH instead.
2002-01-24 03:20:28 +00:00
11111119ae
Make receiving packets work again after struct fxp_rfa grew.
2002-01-24 02:52:15 +00:00
d4da6dc52d
Debug printf within #if 0..#endif did not compile if enabled.
2002-01-24 02:44:11 +00:00
sommerfeld